ASTM has approved a new standard that establishes the chemical composition requirements for ZAC75 #alloy ingots intended for die casting applications. ASTM’s nonferrous #metals and #alloys committee (B02) developed the new standard. go.astm.org/3UivSoT
ASTM International
ASTM International, formerly known as American Society for Testing and Materials, is a standards organization that develops and publishes voluntary consensus technical international standards for a wide range of materials, products, systems and services. Some 12,575 apply globally. The headquarters is in West Conshohocken, Pennsylvania, about 5 mi (8.0 km) northwest of Philadelphia. It was founded in 1902 as the American Section of the International Association for Testing Materials. More on Wikipedia
-
ASTM International
@ASTMIntl
-
ASTM International
@ASTMIntl
ASTM’s #robotics committee (F45) is developing a proposed standard for measuring the task performance of manipulators and mobile manipulators under controlled optical-signal degradation. www.astm.org/news/proposed-mobile-manipulator-standard
-
ASTM International
@ASTMIntl
ASTM’s medical and surgical devices committee (F04) has approved a new standard that provides details and considerations for planning and conducting a seal zone leakage assessment for stent grafts. go.astm.org/48bNaHy
-
ASTM International
@ASTMIntl
ICAM 2027 will take place in Washington, D.C., Sep 20–24, 2027. Highlighting the importance of translating #advancedmanufacturing research into industrial applications, ICAM 2026 brought together more than 1,050 participants from over 450 organizations across 33 countries. See...
-
ASTM International
@ASTMIntl
LIVE TRAINING: "Statistics in ASTM Standard Test Method Development, Application, and Quality Assurance." Held virtually, takes place on 11/16-20. Provides detailed methodology on how to set up Statistical Control Charts relevant to test methods over time as per ASTM D6299.
-
ASTM International
@ASTMIntl
Sorting through the large volume of #sustainability standards from many different standards development organizations (SDOs) got easier earlier this year with the release of @NIST’s Circular Economy Standards Registry (CESR). ASTM standards are prominently among them.
-
ASTM International
@ASTMIntl
ASTM’s consumer products committee (F15) has revised a pool safety standard — the standard specification for aboveground portable #pools— to address performance requirements and test methods for child-resistant ladders. go.astm.org/4z4BUrn
-
ASTM International
@ASTMIntl
ASTM’s unmanned #aircraft systems committee (F38) is developing a proposed standard that will provide a minimum set of requirements for proper human factors when designing a ground control station for unmanned aircraft. go.astm.org/4ifGkFo
-
ASTM International
@ASTMIntl
Check out ASTM's ongoing efforts to promote early-career #professionals, including this year's #professor of the Year. Includes Washington #internships for Students of Engineering (WISE) application deadline for 2027. go.astm.org/4ztmzBQ
-
ASTM International
@ASTMIntl
At Labosport, operating across a rapidly evolving infrastructure market, ASTM standards serve as essential technical benchmarks, providing the methodologies required to optimize surface behavior and validate system compliance through precise testing protocols. #athletics #sports #turf go.astm.org/4yVVDJS
-
ASTM International
@ASTMIntl
As architectural design continues to advance and #glass is used more prominently in buildings, the standards created by ASTM's committee on glass and glass products will continue to be more and more relevant. go.astm.org/4ivf4mp
-
ASTM International
@ASTMIntl
#glass is everywhere, yet it often goes unnoticed. Standards help make sure glass functions safely. Learn about ASTM’s committee on glass and glass products (C14) and how it creates and maintains standards that cover many different applications of glass. go.astm.org/4ivf4mp
-
ASTM International
@ASTMIntl
ASTM's first #steel standard was published in 1901. Much has changed since then, but ASTM's first committee, dedicated to steel, continues to develop standards. Learn the history of the steel committee, and how the adoption of new technologies will affect the industry's future...
-
ASTM International
@ASTMIntl
This November, ASTM's committee on #commercialspaceflight (F47) marks its 10th anniversary. A milestone that reflects the development of the committee’s technical standards, it also represents a decade of collaboration. Learn more at go.astm.org/4dYxOJS
-
ASTM International
@ASTMIntl
Join us for the ASTM Conference on Microplastic Standardization, to be held April 14-15, 2027. To participate in the conference, authors must submit a 250 to 300-word preliminary abstract no later than December 31, 2026. go.astm.org/4e7IJko
-
ASTM International
@ASTMIntl
ASTM’s recovered carbon black (#rcb) committee has approved a standard that will help establish particle size metric and method for determining particle size info. Decreasing particle size in the milling step and reducing presence of trace oversize particles improves performance.
-
ASTM International
@ASTMIntl
On 3 and 4 December, ASTM International Committee F50 brings the 3rd AI Snapshot Workshop series to Singapore, held in conjunction with the Industrial AI Forum 2026 at @ASTARsg Advanced Remanufacturing and Technology Centre (A*STAR ARTC). go.astm.org/4yUViah
-
ASTM International
@ASTMIntl
ASTM’s medical and surgical devices committee (F04) has approved a new standard that provides details and considerations for planning and conducting a seal zone leakage assessment for stent grafts. go.astm.org/4dYxOJS
-
ASTM International
@ASTMIntl
ASTM has approved a new standard that establishes the chemical composition requirements for ZAC75 #alloy ingots intended for die casting applications. ASTM’s nonferrous #metals and #alloys committee (B02) developed the new standard. go.astm.org/3UivSoT
-
ASTM International
@ASTMIntl
ASTM’s #electrical and electronic #insulating materials committee (D09) is developing a proposed standard that will be used to compare the creep strength of #insulation systems in a control environment. www.astm.org/news/new-standard-for-insulation-systems
-
ASTM International
@ASTMIntl
The Workshop on #artificialintelligence Applied to #hydrocarbon Analysis and ASTM Test Methods will be held 12/8/2026. Organized by Committee D02.04.L on Gas Chromatography Methods, it will be held in Orlando, Florida, in conjunction with standards development meetings. #ai See... go.astm.org/4cMc8jD
-
ASTM International
@ASTMIntl
STILL TIME TO LIVE THE SUITE LIFE! RESERVE YOUR HOTEL TODAY! Reserve your room by 5pm EST on 11/6 for December Committee Week, and you will be entered into a drawing for a complimentary suite upgrade! To be held 12/6 to 12/11 in Jacksonville, FL. BOOK NOW! go.astm.org/4eWz6oX
-
ASTM International
@ASTMIntl
HURRY! THERE'S STILL TIME! Deadline for Senior Design Project Grants is 10/31. Student papers are reports submitted by undergrad students, or their faculty mentors, based on senior design or capstone projects. Eligible projects may receive a $2,500 grant. go.astm.org/project-grant-application
-
ASTM International
@ASTMIntl
ASTM’s #robotics committee (F45) is developing a proposed standard for measuring the task performance of manipulators and mobile manipulators under controlled optical-signal degradation. www.astm.org/news/proposed-mobile-manipulator-standard
-
ASTM International
@ASTMIntl
Ken d'Entremont has been named the 2026 ASTM International Professor of the Year. A professor at the University of Utah, Ken has been a strong advocate for standards education and product safety. go.astm.org/4jIiyV1
-
ASTM International
@ASTMIntl
ASTM’s unmanned #aircraft systems committee (F38) is developing a proposed standard that will provide a minimum set of requirements for proper human factors when designing a ground control station for unmanned aircraft. go.astm.org/4ifGkFo
-
ASTM International
@ASTMIntl
ASTM’s #cannabis committee (D37) has created a dedicated subcommittee for cannabis-derived human health and wellness products, focusing on medicinal and well-being applications (D37.11 on human health). go.astm.org/47D3Lnn
-
ASTM International
@ASTMIntl
ASTM’s vacuum cleaner committee (F11) — working with the IEC (International Electrotechnical Commission) in what will be published as a dual-logo item — has developed a test method for wet #carpetcleaning appliances.
-
ASTM International
@ASTMIntl
ASTM’s recovered carbon black (#rcb) committee has approved a standard that will help establish particle size metric and method for determining particle size info. Decreasing particle size in the milling step and reducing presence of trace oversize particles improves performance.
-
ASTM International
@ASTMIntl
When it comes to our youngest and most vulnerable #consumers, safety is everything. #parents need to trust that products made for #infants and #toddlers are safe. ASTM standards help to establish that trust. Listen to a new podcast about standards for #juvenile products.
-
ASTM International
@ASTMIntl
ASTM has approved a new standard that establishes the chemical composition requirements for ZAC75 #alloy ingots intended for die casting applications. ASTM’s nonferrous #metals and #alloys committee (B02) developed the new standard. www.astm.org/news/new-zinc-alloy-standard
-
ASTM International
@ASTMIntl
This November, ASTM's committee on #commercialspaceflight (F47) marks its 10th anniversary. A milestone that reflects the development of the committee’s technical standards, it also represents a decade of collaboration. Learn more at www.astm.org/news/a-decade-of-commercial-space-safety
-
ASTM International
@ASTMIntl
ASTM’s #electrical and electronic #insulating materials committee (D09) is developing a proposed standard that will be used to compare the creep strength of #insulation systems in a control environment. www.astm.org/news/new-standard-for-insulation-systems
-
ASTM International
@ASTMIntl
ASTM’s #soil and #rock committee (D18) has approved a new standard that will serve as a guide for detailed #karst investigations for site development. Karst is a #geological formation created by the dissolution of soluble rocks. www.astm.org/news/new-standard-for-karst-investigations
-
ASTM International
@ASTMIntl
ASTM’s #robotics committee (F45) is developing a proposed standard for measuring the task performance of manipulators and mobile manipulators under controlled optical-signal degradation. www.astm.org/news/proposed-mobile-manipulator-standard
-
ASTM International
@ASTMIntl
According to the International #energy Agency (IEA), global renewable #power capacity is projected to increase almost 4,600 GW over the next 4-5 years. As the adoption of alternative #energies increases at a rapid pace, so does the work and diligence of ASTM’s committees. See...
-
ASTM International
@ASTMIntl
ASTM's #flammability and sensitivity of materials in oxygen-enriched atmospheres committee (G04) has released a revision to the standard guide for cleanliness levels and cleaning methods for materials and equipment used in oxygen-enriched environments. www.astm.org/news/standards-help-prevent-oxygen-enriched-…
-
ASTM International
@ASTMIntl
ASTM's #plastics committee has approved two revisions to strengthen #biodegradation requirements for the standard specification for labeling of plastics designed to be aerobically composted in municipal or industrial facilities (D6400). www.astm.org/news/compostable-products-standard-revised
-
ASTM International
@ASTMIntl
Join us November 17th for "ASTM #property Resilience Assessment," virtual live training that serves as an introduction to the new Property Resilience Assessment (#pra) Guide. Designed for those involved in commercial #real#state, #riskmanagement, and #climate #resilience. See...
-
ASTM International
@ASTMIntl
This November, ASTM's committee on #commercialspaceflight (F47) marks its 10th anniversary. A milestone that reflects the development of the committee’s technical standards, it also represents a decade of collaboration. Learn more at www.astm.org/news/a-decade-of-commercial-space-safety
-
ASTM International
@ASTMIntl
REGISTRATION NOW OPEN: Production Routes, SAF Product Properties & Matching Challenges: Pre-Emptive Steps Before Certification Process. This webinar provides a practical look at the path to SAF certification. #saf #aviation #fuel See... store.astm.org/astm-tpt-1299.html
-
ASTM International
@ASTMIntl
LIVE THE SUITE LIFE! RESERVE YOUR HOTEL! Book your hotel for December Committee Week — to be held 12/6 to 12/11 in Jacksonville, FL. Reserve your room by 5pm EST on 11/6, and you will be entered into a drawing for a complimentary suite upgrade! See... na.eventscloud.com/website/91097/
-
ASTM International
@ASTMIntl
Meet with ASTM representatives at the Gulf Coast Conference, Inc next week in Galveston, TX, October 12th to the 15th. Learn more about enterprise access to standards and the newest features on ASTM Compass, plus the latest ASTM products and services for laboratories... and more! Visit us at booth 511. www.gulfcoastconference.com/conferenceRegistration.php
-
ASTM International
@ASTMIntl
Registration is now open form ASTM's "Workshop on #concrete Intelligence: Establishing an #ai Baseline." Organized by Committee C09 on Concrete and Concrete Aggregates, it will be held December 6 in Jacksonville, FL. na.eventscloud.com/website/93955/c09_dec2026_wksh/
-
ASTM International
@ASTMIntl
ASTM has approved a new standard that establishes the chemical composition requirements for ZAC75 #alloy ingots intended for die casting applications. ASTM’s nonferrous #metals and #alloys committee (B02) developed the new standard. go.astm.org/new-zinc-alloy-standard
-
ASTM International
@ASTMIntl
ASTM having consumers at the same standards-setting table with manufacturers opens the door for important discussions about who and how a product or service may be used in real life. Learn more at go.astm.org/consumers
-
ASTM International
@ASTMIntl
ASTM’s #electrical and electronic #insulating materials committee (D09) is developing a proposed standard that will be used to compare the creep strength of #insulation systems in a control environment. www.astm.org/news/new-standard-for-insulation-systems
-
ASTM International
@ASTMIntl
ASTM’s recovered carbon black (#rcb) committee has approved a standard that will help establish particle size metric and method for determining particle size info. Decreasing particle size in the milling step and reducing presence of trace oversize particles improves performance.
-
ASTM International
@ASTMIntl
According to the International #energy Agency (IEA), global renewable #power capacity is projected to increase almost 4,600 GW over the next 4-5 years. As the adoption of alternative #energies increases at a rapid pace, so does the work and diligence of ASTM’s committees. See...
-
ASTM International
@ASTMIntl
This November, ASTM's committee on #commercialspaceflight (F47) marks its 10th anniversary. A milestone that reflects the development of the committee’s technical standards, it also represents a decade of collaboration. Learn more at www.astm.org/news/a-decade-of-commercial-space-safety
-
ASTM International
@ASTMIntl
ASTM's consumer products committee (F15) has revised two standards for #firearms safety devices. According to ASTM member Matt Mack, the revisions set important requirements to digital-locking devices with biometric recognition lock features. www.astm.org/news/firearms-safety-standards-revised
-
ASTM International
@ASTMIntl
ASTM has approved a new standard that establishes the chemical composition requirements for ZAC75 #alloy ingots intended for die casting applications. ASTM’s nonferrous #metals and #alloys committee (B02) developed the new standard. www.astm.org/news/new-zinc-alloy-standard
-
ASTM International
@ASTMIntl
LIVE THE SUITE LIFE! RESERVE YOUR HOTEL TODAY! Book your hotel for December Committee Week. Reserve your room by 5pm EST on 11/6, and you will be entered into a drawing for a complimentary suite upgrade! To be held 12/6 to 12/11 in Jacksonville, FL. See... na.eventscloud.com/website/91097/
-
ASTM International
@ASTMIntl
We've all seen them. Powered electric #scooters, or e-scooters, in our towns and cities. They may have started out as a novelty, but they are now entrenched as bona fide transportation solutions around the world. And a new ASTM standard will address typical standing e-scooters; it addresses those with more than two wheels and others with seats as well. www.astm.org/news/standards-scoot-ahead
-
ASTM International
@ASTMIntl
What does it take to move Sustainable #aviation #fuel (SAF) from development to certification and ultimately, to the aircraft? Attend virtual webinar on Oct 7 to find out. Provides practical look at path to SAF certification, with pecial focus on ASTM D1655 and ASTM D7566. See...
-
ASTM International
@ASTMIntl
STILL TIME TO REGISTER! Join us for ASTM's "Major Testing Techniques for Plastics: An Introduction," virtual training course October 6th through 8th. This 3-day covers basic principles, techniques, and equipment for mechanical and analytical tests on plastic materials. See...
-
ASTM International
@ASTMIntl
From HTML standards access and version comparison tools, to customer-forward workflow tools like Compass Points, Compass® is built to help your team reduce risk, accelerate R&D, and stay compliant. Learn more. Attend a live demo October 7th at 10:00am EDT. See... event.on24.com/wcc/r/5221806/5E440ED333C6E963ADEC6FE4F0E5…
-
ASTM International
@ASTMIntl
A new standard would provide specific language to assess the risk of cracking and expansion in #concrete-aggregate reactions through uniform criteria across agencies. go.astm.org/4flLFuz
-
ASTM International
@ASTMIntl
#consumers provide an important perspective of how products and services are really used. ASTM's #toy #safety standard (ASTM F963), for example, establishes safety requirements for #toys for #children. Learn more: go.astm.org/consumers
-
ASTM International
@ASTMIntl
ASTM's #plastics committee has approved two revisions to strengthen #biodegradation requirements for the standard specification for labeling of plastics designed to be aerobically composted in municipal or industrial facilities (D6400). www.astm.org/news/compostable-products-standard-revised
-
ASTM International
@ASTMIntl
ASTM staff spent time at Riverbend Environmental Education Center helping to maintain a 30-acre preserve dedicated to teaching environmental principles to kids in the Philadelphia area. Thanks to our volunteers, their outdoor classroom is more protected from rainfall and erosion.
-
ASTM International
@ASTMIntl
Check out ASTM's Additive Manufacturing & Powder Metallurgy Proficiency Testing Program — accepting all laboratories for the next cycle of our AM and Powder Metallurgy PTP. Actively seeking labs to participate for next testing cycle for nickel starting in October. More info... store.astm.org/ptpampm2026.html
-
ASTM International
@ASTMIntl
STILL TIME TO REGISTER FOR LIVE VIRTUAL TRAINING!! Join us 09/29 - 10/01 for ASTM Standards for Light Sport Category #aircraft. This 3-day course gives LSA users, manufacturers, and others tools needed to apply standards as as means of compliance to new rule requirements. See...
-
ASTM International
@ASTMIntl
According to the International #energy Agency (IEA), global renewable #power capacity is projected to increase almost 4,600 GW over the next 4-5 years. As the adoption of alternative #energies increases at a rapid pace, so does the work and diligence of ASTM’s committees. See...
-
ASTM International
@ASTMIntl
Join us Dec 6-11 for December 2026 Committee Week in Jacksonville, Florida! Meetings of C01 Cement; D24 Carbon Black; D37.07 Industrial Hemp; and more! na.eventscloud.com/website/91097/
-
ASTM International
@ASTMIntl
Join us 11/17-19 for the Nov 2026 meeting of ASTM's Committee G04 on Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres. To be held at the Kennedy Space Center in Florida. na.eventscloud.com/website/98355/
-
ASTM International
@ASTMIntl
ASTM has approved a new standard that establishes the chemical composition requirements for ZAC75 #alloy ingots intended for die casting applications. ASTM’s nonferrous #metals and #alloys committee (B02) developed the new standard. www.astm.org/news/new-zinc-alloy-standard
-
ASTM International
@ASTMIntl
Ready to raise the standard for #workplace #attire? Show that you're #astmproud with some new #gear! Visit our brand new #merchandise store for all of your ASTM #clothing and accessories needs. Great prices. International shipping. gear.astm.org
-
ASTM International
@ASTMIntl
LIVE THE SUITE LIFE! THERE'S STILL TIME! Book your hotel for November Committee Week now. Reserve your room by 5pm EST on Oct 2nd, and you will be entered into a drawing for a complimentary suite upgrade! To be held Nov 1st to the 6th in Jacksonville, FL na.eventscloud.com/website/90605/
-
ASTM International
@ASTMIntl
ASTM's consumer products committee (F15) has revised two standards for #firearms safety devices. According to ASTM member Matt Mack, the revisions set important requirements to digital-locking devices with biometric recognition lock features. www.astm.org/news/firearms-safety-standards-revised
-
ASTM International
@ASTMIntl
DON'T MISS OUT! 7th Annual ASTM Autonomy in #aviation Symposium will be held Oct 5-6 in Jacksonville, FL. Organized by ASTM’s autonomy design and operations in aviation administrative committee (AC377). Among speakers, Louis Dube of Scientific Systems. Registration info at...
-
ASTM International
@ASTMIntl
According to the International #energy Agency (IEA), global renewable #power capacity is projected to increase almost 4,600 GW over the next 4-5 years. As the adoption of alternative #energies increases at a rapid pace, so does the work and diligence of ASTM’s committees. See...
-
ASTM International
@ASTMIntl
A new standard would provide specific language to assess the risk of cracking and expansion in #concrete-aggregate reactions through uniform criteria across agencies. go.astm.org/4flLFuz
-
ASTM International
@ASTMIntl
STILL TIME TO REGISTER! 7th Annual ASTM Autonomy in #aviation Symposium will be held Oct 5-6 in Jacksonville, FL. Organized by ASTM’s autonomy design and operations in aviation administrative committee (AC377). Among speakers, Matt George of Merlin Labs. Registration info at...
-
ASTM International
@ASTMIntl
ASTM has launched its Critical and Emerging Technologies (#cet) Division, formerly the Advanced #manufacturing Division, scaling the standards model it built in advanced manufacturing to address #technologies that are converging fastest. Check out go.astm.org/4hKNgfm
-
ASTM International
@ASTMIntl
ASTM's #flammability and sensitivity of materials in oxygen-enriched atmospheres committee (G04) has released a revision to the standard guide for cleanliness levels and cleaning methods for materials and equipment used in oxygen-enriched environments. www.astm.org/news/standards-help-prevent-oxygen-enriched-…
-
ASTM International
@ASTMIntl
ASTM's #plastics committee has approved two revisions to strengthen #biodegradation requirements for the standard specification for labeling of plastics designed to be aerobically composted in municipal or industrial facilities (D6400). www.astm.org/news/compostable-products-standard-revised
-
ASTM International
@ASTMIntl
Ready to raise the standard for #workplace #attire? Show that you're #astmproud with some new #gear! Visit our brand new #merchandise store for all of your ASTM #clothing and accessories needs. Great prices. International shipping. gear.astm.org
-
ASTM International
@ASTMIntl
Workshop on Data Analysis and Associated Principles for Fatigue Crack Growth Rate Testing will be held May 5, 2027. Oganized by ASTM's fatigue and fracture committee (E08) it will be held in Rosemont, Illinois. Abstract due Dec 31, 2026. See na.eventscloud.com/website/89692/
-
ASTM International
@ASTMIntl
A new standard will be used to screen #brownfield properties — land previously used for industrial or commercial purposes that is now abandoned, vacant, or underused — with potential contamination for #flood vulnerability. go.astm.org/4cy3wN1
-
ASTM International
@ASTMIntl
25 years later, we remember lives lost on 9/11, and lives forever changed. The unimaginable loss. Communities that came together in the aftermath. We especially remember first responders who ran toward danger to help others — many of whom never came home. We will never forget.
-
ASTM International
@ASTMIntl
According to the International #energy Agency (IEA), global renewable #power capacity is projected to increase almost 4,600 GW over the next 4-5 years. As the adoption of alternative #energies increases at a rapid pace, so does the work and diligence of ASTM’s committees. See...
-
ASTM International
@ASTMIntl
Ready to raise the standard for #workplace #attire? Show that you're #astmproud with some new #gear! Visit our brand new #merchandise store for all of your ASTM #clothing and accessories needs. Great prices. International shipping. gear.astm.org
-
ASTM International
@ASTMIntl
LIVE THE SUITE LIFE! There's still time to book your hotel for November Committee Week, 11/01-6 at the Hyatt Regency Jacksonville Riverfront in Jacksonville, FL. Reserve your room by 5pm EST on October 2nd, and you will be entered into a drawing for a complimentary suite upgrade!
-
ASTM International
@ASTMIntl
Read about all the candidates running for chair, vice chair, and director of ASTM International's Board of Directors. www.astm.org/news/board-of-directors-nominations-2027
-
ASTM International
@ASTMIntl
Workshop on the Challenges in Structural Fatigue and Crack Growth Lifing Methods. Nov 4th in Jacksonville, Florida. Organized by ASTM Committee E08 on Fatigue and Fracture, the program will feature a combination of invited speakers from aircraft and spacecraft OEMs, and more!
-
ASTM International
@ASTMIntl
Join us November 1-6 for November 2026 Committee Week in Jacksonville, Florida! Meetings of D20 Plastics; E08 Fatigue and Fracture; E28 Mechanical Testing; F07 Aerospace and Aircraft; F16 Fasteners; and more! na.eventscloud.com/website/90605/
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
At ASTM International, our mission is to create a foundation for #trust, #trade, and #transformation through the power of global #standardization. Hear from ASTM’s leadership about how this mission drives our work today and how we can help our world work better tomorrow.
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
CALL FOR PRESENTATIONS... REGISTRATION OPEN... Hydrogen Embrittlement Workshop. Join us November 5th for the only technical forum devoted to hydrogen embrittlement testing technology in the aerospace industry. na.eventscloud.com/No-Event.php
-
ASTM International
@ASTMIntl
The Costa Rican Institute of Technical Standards (@INTECOcr) has standards to help improve safety and boost innovation in the construction sector. ASTM standards help lay the foundation. www.astm.org/news/costa-rica-standardizes-construction
-
ASTM International
@ASTMIntl
REGISTRATION AND CALL FOR PRESENTATIONS! The 2026 Workshop on Transparent Enclosures and Materials will be held November 4th. Organized by ommittee F07 on Aerospace and #aircraft, it will be held in Jacksonville, FL. na.eventscloud.com/No-Event.php
-
ASTM International
@ASTMIntl
Understanding how ASTM committees are balanced and how members are classified is an important aspect of participation in the standards development process. Learn more at www.astm.org/news/how-to-maintain-committee-balance
-
ASTM International
@ASTMIntl
According to the Bureau of Labor Statistics (BLS), over 5,000 #workers died on jobsites in the U.S. in 2024. And that’s only a fraction of those injured. But ASTM standards can reduce risk before incidents occur. www.astm.org/news/raising-the-standard-for-safer-work
-
ASTM International
@ASTMIntl
Jeff Clark, executive director of ASTM's Test Monitoring Center, celebrated the 50th anniversary of TMC today. Surrounded by TMC staff, ASTM senior staff, and members of the ASTM Board of Directors, Clark cut the anniversary cake, marking a milestone.
-
ASTM International
@ASTMIntl
THERE'S STILL TO REGISTER AND BOOK YOUR HOTEL! Join us for ASTM October Committee Week in Jacksonville, FL on October 4-9, 2026. Meetings of: D14 Adhesives; D22 Air Quality; E06 Performance of Buildings; E34 Occupational Health and Safety; E54 Homeland Security Applications; and much more! na.eventscloud.com/website/89692
-
ASTM International
@ASTMIntl
According to the International #energy Agency (IEA), global renewable #power capacity is projected to increase almost 4,600 GW over the next 4-5 years. As the adoption of alternative #energies increases at a rapid pace, so does the work and diligence of ASTM’s committees. See...
-
ASTM International
@ASTMIntl
CALL FOR PRESENATIONS: Workshop on Future Directions for Third-Body and Roughened Counterface Wear Testing in Joint Replacements will be held May 4, 2027. To participate in the workshop, those interested should submit an abstract no later than December 1, 2026.
-
ASTM International
@ASTMIntl
AI, robotics, advanced manufacturing. ASTM’s new Critical and Emerging Technologies Division is positioned to help turn rapidly evolving technologies into practical solutions that can be tested, trusted, and deployed at scale. On the latest STANDARDS IMPACT podcast.
-
ASTM International
@ASTMIntl
ASTM has launched its Critical and Emerging Technologies (#cet) Division, formerly the Advanced #manufacturing Division, scaling the standards model it built in advanced manufacturing to address #technologies that are converging fastest. Check out go.astm.org/4hKNgfm
-
ASTM International
@ASTMIntl
A new standard will be used to screen #brownfield properties — land previously used for industrial or commercial purposes that is now abandoned, vacant, or underused — with potential contamination for #flood vulnerability. go.astm.org/4cy3wN1
-
ASTM International
@ASTMIntl
REGISTER TODAY! Join us for the 2nd #artificialintelligence in #manufacturing Systems Workshop on October 7th at ASTM October Committee Week in Jacksonville, FL. Registration and agenda information at go.astm.org/4ipqBW4
-
ASTM International
@ASTMIntl
ASTM’s #soil and rock committee has announced that the previously published standard test methods for liquid limit, plastic limit, and plasticity index of #soils (D4318) has been withdrawn after it was not approved through ASTM’s consensus process within the timeframe required...
-
ASTM International
@ASTMIntl
AI, robotics, and other innovations may dominate the conversation, but today’s biggest challenges happen where emerging technologies intersect. Join host Dave Walsh and guest Mohsen Seifi @smseifi on ASTM's podcast as they explore how standards can match rapid pace of innovation.
-
ASTM International
@ASTMIntl
ASTM’s #glass and glass products committee (C14) is developing a proposed standard that will provide quality approval guidelines on decorative enamels on flat glass. Will provide a framework for manufacturers to avoid shrinkage and embrittlement in AM ceramic product composition.
-
ASTM International reposted
-
ASTM International
@ASTMIntl
ASTM’s aromatic, industrial, specialty and related #chemicals committee (D16) has approved a new standard that presents a procedure for using gas chromatography to determine impurities in #methanol products. go.astm.org/4cBDCrN
-
ASTM International
@ASTMIntl
The Sixth Symposium on Evaluation of Existing and New Sensor Technologies for #fatigue, #fracture, and Mechanical Testing will be held November 4, 2026. Organized by Committees E08 on Fatigue and Fracture and E28 on Mechanical Testing , it will be held in Jacksonville, Florida... in conjunction with the standards development meetings of the committee. go.astm.org/4pysr7U
-
ASTM International
@ASTMIntl
ASTM has launched its Critical and Emerging Technologies (#cet) Division, formerly the Advanced #manufacturing Division, scaling the standards model it built in advanced manufacturing to address #technologies that are converging fastest. Check out go.astm.org/4hKNgfm
-
ASTM International
@ASTMIntl
While in Washington, DC, this week, @ASTMpres Andy Kireta (left in photo) stopped by the The #aluminum Association and was warmly welcomed by President and CEO Charles Johnson. Sincere thanks to all for the informative exchange and to all representatives of the aluminum industry involved in ASTM technical committees.
-
ASTM International
@ASTMIntl
LIVE THE SUITE LIFE! There's still time to book your hotel for October Committee Week. Reserve your guest room by 5pm EST on September 12th, and you will be entered into a drawing for a complimentary suite upgrade! Visit go.astm.org/4wBHYXc
-
ASTM International
@ASTMIntl
ASTM’s #glass and glass products committee (C14) is developing a proposed standard that will provide quality approval guidelines on decorative enamels on flat glass. Will provide a framework for manufacturers to avoid shrinkage and embrittlement in AM ceramic product composition.
-
ASTM International
@ASTMIntl
A new standard would provide specific language to assess the risk of cracking and expansion in #concrete-aggregate reactions through uniform criteria across agencies. go.astm.org/4flLFuz
-
ASTM International
@ASTMIntl
ASTM’s water committee is developing a proposed test method that uses existing sample preparation protocols to measure #microplastics in #water using #infrared technology. See go.astm.org/4bUaeN7
-
ASTM International
@ASTMIntl
A new standard will be used to screen #brownfield properties — land previously used for industrial or commercial purposes that is now abandoned, vacant, or underused — with potential contamination for #flood vulnerability. go.astm.org/4cy3wN1
-
ASTM International
@ASTMIntl
Landing on water. Traveling up to 800 miles without refueling. Today's light-sport #aircraft (LSA) are capable of amazing things. Recently, a rule change by the FAA cleared the runway for even more possibilities. And new standards are on their way. go.astm.org/3T3aqmE
-
ASTM International
@ASTMIntl
ASTM has approved a new standard — developed by the #detention and #correctional facilities committee (F33) — to help assess the #fire performance of #mattresses intended for use in detention and correctional facilities, as well as #transportation environments, such as #ships...
-
ASTM International
@ASTMIntl
A new standard would provide specific language to assess the risk of cracking and expansion in #concrete-aggregate reactions through uniform criteria across agencies. go.astm.org/4flLFuz
-
ASTM International
@ASTMIntl
ASTM’s aromatic, industrial, specialty and related #chemicals committee (D16) has approved a new standard that presents a procedure for using gas chromatography to determine impurities in #methanol products. go.astm.org/4cBDCrN
-
ASTM International
@ASTMIntl
ASTM’s #soil and rock committee has announced that the previously published standard test methods for liquid limit, plastic limit, and plasticity index of #soils (D4318) has been withdrawn after it was not approved through ASTM’s consensus process within the timeframe required...
-
ASTM International
@ASTMIntl
ASTM’s #glass and glass products committee (C14) is developing a proposed standard that will provide quality approval guidelines on decorative enamels on flat glass. Will provide a framework for manufacturers to avoid shrinkage and embrittlement in AM ceramic product composition.
-
ASTM International
@ASTMIntl
ASTM’s #additivemanufacturing technologies committee (F42) has proposed a standard that will outline the design process for 3D ceramic production using AM. The guide will provide a framework for manufacturers to avoid shrinkage and embrittlement in AM ceramic product composition... go.astm.org/4fKGG71
-
ASTM International
@ASTMIntl
Registration is now open for the Workshop on Testing Methodologies for #tibial Insert Locking Mechanism Strength. Organized by ASTM Committee F04 on Medical and #surgical Materials and Devices, it will be held in Jacksonville, Florida on November 3, 2026. go.astm.org/tibial-insert-locking-mechanism-workshop
-
ASTM International
@ASTMIntl
Ensure quality, consistency, and compliance in your #earthwork projects with the newly released Quality Control of Soil Compaction Using ASTM Standards, 2nd edition. Individual copy? See go.astm.org/4cim5Vm Via your Digital Library subscription? go.astm.org/3UbA49g
-
ASTM International
@ASTMIntl
ASTM won Gold at the Hermes Creative Awards for both its #magazine, Standardization News, and its #podcast, Standards Impact. One of the oldest and largest creative competitions in the world. Winners range in size from individuals to media conglomerates, and Fortune 500 companies
-
ASTM International
@ASTMIntl
Existing safety standards weren’t designed to address today’s #lighter market with its rechargeable arc #lighters powered by #lithium-ion #batteries and compact torches with continuous-burn flames. ASTM’s subcommittee on safety standards for lighters is working to close that gap.
-
ASTM International
@ASTMIntl
Under the direct of the ASTM #exo Technological Center of Excellence, the Exo Games open today at ASTM Headquarters in West Conshohocken, PA. Follow us on LinkedIn and Instagram throught the day for coverage. #exoskskeletons #exo #stem #student #competition #engineering
-
ASTM International
@ASTMIntl
ASTM's consumer products committee (F15) has approved a new standard for commercial electric-powered #scooters for adults. It covers the establishment of performance requirements & test methods used to minimize hazards for users of commercial electric-powered scooters for adults. go.astm.org/4f2b1xE
-
ASTM International
@ASTMIntl
ASTM’s water committee is developing a proposed test method that uses existing sample preparation protocols to measure #microplastics in #water using #infrared technology. See go.astm.org/4bUaeN7
-
ASTM International
@ASTMIntl
Today's light-sport #aircraft (LSA) are capable of landing on water. Some can even travel up to 800 miles without refueling. Recently, a rule change by the Federal Aviation Administration @FAANews cleared the runway for even more possibilities. And new standards are on their way.
-
ASTM International
@ASTMIntl
ASTM Insight SQC is a custom-built statistical quality control software solution for labs with single or multiple locations. Fully customizable, Insight SQC's value speaks for itself – helping catch errors early and saving lab managers and technicians precious time and resources.
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM Insight SQC is a custom-built statistical quality control software solution for labs with single or multiple locations. Fully customizable, Insight SQC's value speaks for itself – helping catch errors early and saving lab managers and technicians precious time and resources.
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM’s #weathering and durability committee (G03) has approved a new standard for the construction of a simple device that can measure total duration of wetness at any location — a testing procedure that the industry has identified as necessary for years. go.astm.org/4aezQUj
-
ASTM International
@ASTMIntl
ASTM’s water committee (D19) is developing a proposed standard for a test method to determine carbon dioxide and hydrogen sulfide content in highly alkaline water — a guide of measuring carbon dioxide and hydrogen sulfide using gas chromatography coupled with thermal conductivity detector. go.astm.org/4vVVq7V
-
ASTM International
@ASTMIntl
ASTM’s board of directors recently approved the creation of a new technical committee on artificial intelligence (#ai) in #manufacturing systems. The new committee (F50) will focus on frameworks, best practices, and standards for AI technologies in manufacturing.
-
ASTM International
@ASTMIntl
Technology and underground utilities and cannabis committees have awarded the Frank W. Reinhart Award for Terminology to Tom Walsh, partner of Plastic Pipeline Integrity. It recognizes his work helping to develop first terminology doc for cannabis and hemp.
-
ASTM International
@ASTMIntl
CALL FOR PRESENTATIONS! ASTM International will be hosting the ASTM Beard Conference: Advancing Asbestos Standards - Integration of Emerging Technologies and Artificial Intelligence from April 14-16, 2027, in Rosemont, Illinois.
To participate in the conference, authors must submit a 250 to 300-word preliminary abstract no later than November 30, 2026.
Learn more at go.astm.org/3S1qGo5 -
ASTM International
@ASTMIntl
ASTM’s water committee is developing a proposed test method that uses existing sample preparation protocols to measure #microplastics in #water using #infrared technology. See www.astm.org/news/proposed-infrared-test-method-for-micro…
-
ASTM International
@ASTMIntl
A new guide for unmanned aerial systems would outline protocol for purchasing, authenticating and tracing #drone materials. go.astm.org/4aFPZlL
-
ASTM International
@ASTMIntl
ASTM's consumer products committee (F15) has approved a new standard for commercial electric-powered #scooters for adults. It covers the establishment of performance requirements & test methods used to minimize hazards for users of commercial electric-powered scooters for adults. go.astm.org/4f2b1xE
-
ASTM International
@ASTMIntl
ASTM’s water committee is developing a proposed test method that uses existing sample preparation protocols to measure #microplastics in #water using #infrared technology. See go.astm.org/infrared-test-microplastics-in-water
-
ASTM International
@ASTMIntl
ASTM’s committee on #soil and rock (D18) announced that the previously published standard test methods for liquid limit, plastic limit, and plasticity index of soils (D4318) has been withdrawn after it was not approved through ASTM’s consensus process within the timeframe required. go.astm.org/4yAHKlb
-
ASTM International
@ASTMIntl
ASTM’s Project Grants program has announced an increase in the award amount for senior student design and capstone design project #grants from $500 to $2,500 each. The 2026 deadline for online project grant applications is October 31. For more info, see www.astm.org/news/press-releases/astm-project-grant-increase
-
ASTM International
@ASTMIntl
ASTM's #fasteners committee (F16) has presented its Fred F. Weingruber Award to Kevin Menke, director of #engineering @FastenalCompany. The award recognizes Menke’s exemplary and sustained service to committee F16. go.astm.org/4yyK785
-
ASTM International
@ASTMIntl
Behind most sips and scents, sensory science plays a significant role in how your beer tastes or your deodorant smells. Since 1960, the ASTM sensory evaulation committee (E18) has developed unibiased sensory science standards. go.astm.org/E18
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
TIME TO REGISTER! ASTM International is virtually hosting a one-day Phase I Environmental Site Assessments course on August 19, 2026, which covers the ASTM Environmental Site Assessment Standard Practices for the Phase I Site Assessment Process (E1527).
Register at -
ASTM International
@ASTMIntl
STILL TIME TO REGISTER! ASTM International is hosting a Renewable Fuels course virtually from August 18-20. The course an introduction to renewable fuels for both ground and aviation use.
Register at go.astm.org/45ePI63 -
ASTM International
@ASTMIntl
It's less than 2 weeks away from the ASTM Exo Games! Don't miss your chance to watch the next generation of exoskeleton innovators put their designs to the test. Join us Aug 3-6 as #student-designed #exoskeletons will be evaluated in realistic emergency-response scenarios. See...
-
ASTM International
@ASTMIntl
A proposed ASTM standard will outline a method for collecting #road #infrastructure data using factory-installed embedded software that operates exclusively on original, factory-installed #automobile sensors. go.astm.org/3PpE840
-
ASTM International
@ASTMIntl
ASTM’s #weathering and durability committee (G03) has approved a new standard for the construction of a simple device that can measure total duration of wetness at any location — a testing procedure that the industry has identified as necessary for years. go.astm.org/4aezQUj
-
ASTM International
@ASTMIntl
What is the significance of the standards developed by the subcommittee on test method evaluation and quality control (E11.20)? go.astm.org/4wkWgfc
-
ASTM International
@ASTMIntl
ASTM’s metallic and inorganic coatings committee (B08) has approved a guide for pre and post-coating treatments of #steel. The new guide will provide information on what makes for ferrous materials, like steel, susceptible to hydrogen embrittlement, as well as mitigation tactics.
-
ASTM International
@ASTMIntl
Thank you, ASTM members! Since 2005, there have been 100,000 work items! And it's all due to your hard work and dedication. Imagine how many there would be if we started counting in 1898! See full list of current work items at go.astm.org/work-items
-
ASTM International
@ASTMIntl
ASTM has presented Collin Gustafson with its 2026 Katharine and Bryant Mather Scholarship Award, administered by the committee on concrete and concrete aggregates (C09). Gustafson is at @UTAustin pursuing his PhD. go.astm.org/4vDoxNg
-
ASTM International
@ASTMIntl
Nature-based solutions for #urban #heat? Learn about this and more in an interview with Paul Sonnenfeld, vice chair of ASTM's #climate and #community subcommittee, part of the committee on #environmental assessment, risk management and corrective action (E50).
-
ASTM International
@ASTMIntl
ASTM's consumer products committee (F15) has approved a new standard for commercial electric-powered #scooters for adults. It covers the establishment of performance requirements & test methods used to minimize hazards for users of commercial electric-powered scooters for adults. go.astm.org/4f2b1xE
-
ASTM International
@ASTMIntl
In addition to providing the backdrop for Hollywood movies and luxury enclaves for some of the world’s wealthiest people, the infrastructure boom in the #uae also made it the ideal location for ASTM's first official chapter. go.astm.org/4aZtPLo
-
ASTM International
@ASTMIntl
TIME TO REGISTER: ASTM International's environmental assessment committee (E50) will be holding the Workshop on Collaborating for Resilience: Standards, Practice, and Partnership on October 8 in Jacksonville, Florida.
Register and learn more at go.astm.org/4dixLIL -
ASTM International
@ASTMIntl
TIME TO REGISTER: ASTM International's air quality committee (D22) is holding the Workshop on Detection Limits and Censoring Data in Workplace Exposure Assessment on October 8 in Jacksonville, Florida.
Register and learn more at go.astm.org/4rWcARB -
ASTM International
@ASTMIntl
TIME TO REGISTER: ASTM International's pesticides, antimicrobials, and alternative control agents committee (E35) will be holding the 45th Symposium on Pesticide Formulation and Delivery Systems: Formulation and Regulatory Change Driven by Environmental and Market Conditions from October 6-8 in Jacksonville, Florida!
Register and learn more at go.astm.org/3ZUKrOH -
ASTM International
@ASTMIntl
Proposed standard currently being developed by the occupational health and safety committee (E34) will provide a guide for defining and classifying serious injury and fatality (SIF) events that do not directly cause injuries and illness. go.astm.org/3Rf5nPm
-
ASTM International
@ASTMIntl
Standards help make the world’s biggest sporting event safer and more competitive. For a brief history of #football to modern safety standards like ASTM's performance specification for #soccer goals or standards for turf testing, read "Kicking Safety Up a Notch at the World Cup."
-
ASTM International
@ASTMIntl
DOWNLOAD PDF! The Clean #energy and #decarbonization Technologies Standardization Impact Report showcases the direct link between emerging technologies and the work of several ASTM committees dedicated to clean energy. Get the report now! Visit go.astm.org/impact-report-clean-energy
-
ASTM International
@ASTMIntl
A new ASTM standard will be used to estimate time for the complete #biodegradability of non-floating plastics designed for use in aquatic environments. It provides a verifiable testing and reporting methodology to address persistence and accumulation of #plastics in the oceans.
-
ASTM International
@ASTMIntl
ASTM’s #weathering and durability committee (G03) has approved a new standard for the construction of a simple device that can measure total duration of wetness at any location — a testing procedure that the industry has identified as necessary for years. go.astm.org/4aezQUj
-
ASTM International
@ASTMIntl
ASTM International's Exo Technology Center of Excellence (ET CoE) is hosting its 3rd Annual Exo Games from August 3-6 at ASTM Headquarters! The games' initiative will seek to improve student involvement and education in the exo technologies industry.
Register now at -
ASTM International
@ASTMIntl
Today's light-sport #aircraft (LSA) are capable of landing on water. Some can even travel up to 800 miles without refueling. Recently, a rule change by the Federal Aviation Administration @FAANews cleared the runway for even more possibilities. And new standards are on their way.
-
ASTM International
@ASTMIntl
CALL FOR PRESENTATIONS! Workshop on the Challenges in Structural Fatigue and Crack Growth Lifing Methods will be held on Nov 4 in Jacksonville, FL. Individuals interested in presenting should submit a 250 to 300-word abstract by September 11.
go.astm.org/4aza25f -
ASTM International
@ASTMIntl
A new guide for unmanned aerial systems would outline protocol for purchasing, authenticating and tracing #drone materials. go.astm.org/4aFPZlL
-
ASTM International
@ASTMIntl
ASTM's #amusementrides and devices committee (F24) is developing a proposed practice to uniformly handle dry slides. The proposed standard will carve out space for proper design and implementation of dry #slides, including slides with and without mats. go.astm.org/3Rf3ySD
-
ASTM International
@ASTMIntl
What is the significance of the standards developed by the subcommittee on test method evaluation and quality control (E11.20)? Learn the answer in the latest issue of STANDARDIZATION NEWS. go.astm.org/4wkWgfc
-
ASTM International
@ASTMIntl
In addition to providing the backdrop for Hollywood movies and luxury enclaves for some of the world’s wealthiest people, the infrastructure boom in the #uae also made it the ideal location for ASTM's first official chapter. go.astm.org/4aZtPLo
-
ASTM International reposted
Andy Kireta
@ASTMpres
Check out my latest article: Standards, Policy, and the Pursuit of Better Outcomes www.linkedin.com/pulse/standards-policy-pursuit-better-ou… via @LinkedIn
-
ASTM International
@ASTMIntl
Proposed standard currently being developed by the occupational health and safety committee (E34) will provide a guide for defining and classifying serious injury and fatality (SIF) events that do not directly cause injuries and illness. go.astm.org/3Rf5nPm
-
ASTM International
@ASTMIntl
Standards help make the world’s biggest sporting event safer and more competitive. For a brief history of #football to modern safety standards like ASTM's performance specification for #soccer goals or standards for turf testing, read "Kicking Safety Up a Notch at the World Cup."
-
ASTM International
@ASTMIntl
DEADLINE APPROACHES: ASTM International's Property Condition Assessments virtual course runs from July 13-16, giving an overview of the ASTM Property Condition Assessment (PCA) standard, provides a guide on how to use the standard to conduct a baseline property condition assessment, and more.
Learn more at go.astm.org/4v6lqx8 -
ASTM International
@ASTMIntl
Nature-based solutions for #urban #heat? Learn about this and more in an interview with Paul Sonnenfeld, vice chair of ASTM's #climate and #community subcommittee, part of the committee on #environmental assessment, risk management and corrective action (E50).
-
ASTM International
@ASTMIntl
ASTM’s #weathering and durability committee (G03) has approved a new standard for the construction of a simple device that can measure total duration of wetness at any location — a testing procedure that the industry has identified as necessary for years. go.astm.org/4aezQUj
-
ASTM International
@ASTMIntl
A new guide for unmanned aerial systems would outline protocol for purchasing, authenticating and tracing drone materials.
For more information, see www.astm.org/news/proposed-drone-material-guide -
ASTM International
@ASTMIntl
A new standard would provide specific language to assess the risk of cracking and expansion in concrete-aggregate reactions through uniform criteria across agencies.
For more information, see www.astm.org/news/proposed-concrete-aggregate-standard -
ASTM International
@ASTMIntl
A proposed ASTM standard will outline a method for collecting #road #infrastructure data using factory-installed embedded software that operates exclusively on original, factory-installed #automobile sensors. go.astm.org/3PpE840
-
ASTM International
@ASTMIntl
CALL FOR PAPERS! Workshop on Modern Coolants for Modern Engines will be held on May 5, 2027, in Rosemont, IL. Individuals interested in presenting should submit a 250 to 300-word abstract by December 11.
go.astm.org/4oMuzcr -
ASTM International
@ASTMIntl
A new ASTM standard will be used to estimate time for the complete #biodegradability of non-floating plastics designed for use in aquatic environments. It provides a verifiable testing and reporting methodology to address persistence and accumulation of #plastics in the oceans.
-
ASTM International
@ASTMIntl
A new practice for infrastructure connected vehicle data extraction (ICODE) would establish a consistent framework for how #road infrastructure data should be collected from factory-installed, OEM-approved vehicle sensors. go.astm.org/3SDSbnC
-
ASTM International
@ASTMIntl
ASTM’s #weathering and durability committee (G03) has approved a new standard for the construction of a simple device that can measure total duration of wetness at any location — a testing procedure that the industry has identified as necessary for years. go.astm.org/4aezQUj
-
ASTM International
@ASTMIntl
ASTM has approved a new standard — developed by the #detention and #correctional facilities committee (F33) — to help assess the #fire performance of #mattresses intended for use in detention and correctional facilities, as well as #transportation environments, such as #ships...
-
ASTM International
@ASTMIntl
A proposed ASTM standard will outline a method for collecting #road #infrastructure data using factory-installed embedded software that operates exclusively on original, factory-installed #automobile sensors. go.astm.org/3PpE840
-
ASTM International
@ASTMIntl
ASTM's digital information in the supply chain committee (F49) has approved three new standards that combine with the standard terminologies for goods movement process (GMP) (F3682) and relating to supply chain stakeholders (F3776)... go.astm.org/4tXSkQk
-
ASTM International
@ASTMIntl
CALL FOR PAPERS! Workshop on the Challenges in Structural Fatigue and Crack Growth Lifing Methods will be held on Nov 4 in Jacksonville, FL. Individuals interested in presenting should submit a 250 to 300-word abstract by September 11.
go.astm.org/4aza25f -
ASTM International
@ASTMIntl
Proposed standard currently being developed by the occupational health and safety committee (E34) will provide a guide for defining and classifying serious injury and fatality (SIF) events that do not directly cause injuries and illness. go.astm.org/3Rf5nPm
-
ASTM International
@ASTMIntl
DOWNLOAD PDF! The Clean #energy and #decarbonization Technologies Standardization Impact Report showcases the direct link between emerging technologies and the work of several ASTM committees dedicated to clean energy. Get the report now! Visit go.astm.org/impact-report-clean-energy
-
ASTM International
@ASTMIntl
ASTM’s board of directors recently approved the creation of a new technical committee on #artificialintelligence (#ai) in #manufacturing systems. The new committee (F50) will focus on frameworks, best practices, and standards for AI technologies in manufacturing.
-
ASTM International
@ASTMIntl
ASTM's digital information in the supply chain committee (F49) has approved three new standards that combine with the standard terminologies for goods movement process (GMP) (F3682) and relating to supply chain stakeholders (F3776)... go.astm.org/4tXSkQk
-
ASTM International
@ASTMIntl
ASTM International's #plastics committee (D20) developed a new standard for plastic temporary ceiling #barriers protect people, equipment and operations from debris without disrupting fire suppression systems, like #sprinklers. go.astm.org/4ohh6ck
-
ASTM International
@ASTMIntl
ASTM's plastic piping systems committee (F17) presented its Frank W. Reinhart and Henry "Butch" Kuhlman Award to Deanne Dutton Hughes, director IT systems and industry liaison at McElroy Manufacturing, Inc. @McElroyFusion Learn more at go.astm.org/4460Cuh
-
ASTM International
@ASTMIntl
A proposed ASTM standard will outline a method for collecting #road #infrastructure data using factory-installed embedded software that operates exclusively on original, factory-installed #automobile sensors. go.astm.org/3PpE840
-
ASTM International
@ASTMIntl
At the ASTM member's luncheon last week, Lorne Everett, Chairman Em. of LEA Environmental, Inc., was awarded the William T. Cavanaugh Award. The Cavanaugh Memorial Award honors W.T. Cavanaugh, CEO of ASTM International from 1970 to 1985. Learn more at go.astm.org/3Qc1ydh
-
ASTM International
@ASTMIntl
ASTM’s occupational health and safety committee (E34) is developing a proposed standard that will help improve characterization and management of hazardous materials identified or generated from facility #decommissioning processes. go.astm.org/43nwUAL
-
ASTM International
@ASTMIntl
ASTM has approved a new standard — developed by the #detention and #correctional facilities committee (F33) — to help assess the #fire performance of #mattresses intended for use in detention and correctional facilities, as well as #transportation environments, such as #ships...
-
ASTM International
@ASTMIntl
ASTM’s board of directors recently approved the creation of a new technical committee on #artificialintelligence (#ai) in #manufacturing systems. The new committee (F50) will focus on frameworks, best practices, and standards for AI technologies in manufacturing.
-
ASTM International
@ASTMIntl
The #philippines standards for #petroleum products and facilities are geared toward creating a low-emissions future, and ASTM standards aim to help. go.astm.org/4uzOm0D
-
ASTM International
@ASTMIntl
A recent BRELA Research in Economics and Legal Analytics report, "Standardization & the relationship with innovation in critical and emerging technologies," shows that across 7K+ advanced manufacturing standards analyzed, ASTM leads all global standards bodies in patent citations (925).
go.astm.org/4dI4kit -
ASTM International
@ASTMIntl
ASTM's digital information in the supply chain committee (F49) has approved three new standards that combine with the standard terminologies for goods movement process (GMP) (F3682) and relating to supply chain stakeholders (F3776)... go.astm.org/4tXSkQk
-
ASTM International
@ASTMIntl
Are you making the right choices to satisfy your #lab's #proficiencytesting requirements? Attend our free webinar on Tuesday, June 9, from 11 a.m. to 12 p.m. EST to learn how to ensure your lab's PT program is successful from start to finish. REGISTER TODAY...
-
ASTM International
@ASTMIntl
A proposed ASTM standard will outline a method for collecting road infrastructure data using factory-installed embedded software that operates exclusively on original, factory-installed automobile sensors. go.astm.org/3PpE840
-
ASTM International
@ASTMIntl
From cat trees to dog harnesses, standards help make our furry friends safer. Join host Dave Walsh and his guest Brian Grochal, director of safety and quality with #pets product company @barkbox, as they discuss pet toys, harnesses, more. Wherever you get podcasts, or...
-
ASTM International
@ASTMIntl
Are you making the right choices to satisfy your #lab's #proficiencytesting requirements? Attend our free webinar on Tuesday, June 9, from 11 a.m. to 12 p.m. EDT to learn how to ensure your lab's PT program is successful from start to finish. REGISTER TODAY...
-
ASTM International
@ASTMIntl
ASTM Launch — an XCELLERATE™ program — is now accepting submissions through June 5, 2026. ASTM Launch provides funding for short-term initiatives that strengthen the integration of standards and strategic research and development across ASTM’s 90 industry sectors. Learn more...
-
ASTM International
@ASTMIntl
The Katharine E. Morgan Women in Leadership Award has been given to Helene Pierce for her contributions to the roofing & waterproofing committee. It honors Katharine Morgan, ASTM’s first woman president, and recognizes leaders of committees who have made significant contributions. go.astm.org/4v7Icox
-
ASTM International
@ASTMIntl
SAVE THE DATE! ASTM International is hosting its 7th Annual Autonomy in Aviation Symposium, organized by ASTM’s autonomy design and operations in aviation administrative committee (AC377). The symposium will be held Oct. 5-6, 2026, in Jacksonville, FL. go.astm.org/4cKdpqr
-
ASTM International
@ASTMIntl
Today is International Building Safety Day? Brought to you by The International Code Council as part of Building Safety Month, it's designed as a public awareness campaign to raise awareness of what it takes to create safe and sustainable/resilient buildings.
-
ASTM International
@ASTMIntl
From cat trees to dog harnesses, standards help make our furry friends safer. Join host Dave Walsh and his guest Brian Grochal, director of safety and quality with #pets product company @barkbox, as they discuss pet toys, harnesses, more. Wherever you get podcasts, or...
-
ASTM International
@ASTMIntl
A recent BRELA Research in Economics and Legal Analytics report, "Standardization & the relationship with innovation in critical and emerging technologies," shows that across 7K+ advanced manufacturing standards analyzed, ASTM leads all global standards bodies in patent citations (925)... go.astm.org/4dI4kit
-
ASTM International
@ASTMIntl
The #philippines standards for #petroleum products and facilities are geared toward creating a low-emissions future, and ASTM standards aim to help. go.astm.org/4uzOm0D
-
ASTM International
@ASTMIntl
Early-bird registration is now available for the Performance-Based Façade Design (PBFD) Seminar on Durable Façades to be held September 16th to 28th in Venice, Italy. #pbfd2026 #durablefacades #buildingperformance See... go.astm.org/3RjLOW8
-
ASTM International
@ASTMIntl
ASTM’s board of directors recently approved the creation of a new technical committee on #artificialintelligence (#ai) in #manufacturing systems. The new committee (F50) will focus on frameworks, best practices, and standards for AI technologies in manufacturing.
-
ASTM International
@ASTMIntl
ASTM’s consumer products committee (F15) has presented its Margaret Dana Award to Dorothy Drago, retired proprietor of Drago Expert Services.
Drago was recognized for over 35 years of dedication, participation and promotion of ASTM standards for a wide range of consumer products. -
ASTM International
@ASTMIntl
A proposed ASTM standard will outline a method for collecting #road #infrastructure data using factory-installed embedded software that operates exclusively on original, factory-installed #automobile sensors. go.astm.org/3PpE840
-
ASTM International
@ASTMIntl
SAVE THE DATE: The Workshop on Collaborating for Resilience: Standards, Practice, and Partnership will be held October 8, 2026, in Jacksonville, FL. go.astm.org/4dixLIL
-
ASTM International
@ASTMIntl
Proposed standard currently being developed by the occupational health and safety committee (E34) will provide a guide for defining and classifying serious injury and fatality (SIF) events that do not directly cause injuries and illness. go.astm.org/3Rf5nPm
-
ASTM International
@ASTMIntl
Did you know ASTM recently approved the creation of a new technical committee on artificial intelligence (AI) in manufacturing systems? Join us in Dallas, June 3-4, to participate in the inaugural committee workshop and meeting during ASTM June Committee Week.
-
ASTM International
@ASTMIntl
ASTM Exo Technology Center of Excellence (ETCoE) will be holding the 2026 Exo Games, August 3–7, at ASTM HQ in West Conshohocken, PA. Interested student teams need to submit a team description paper by June 8, 2026. #exoskeleton See go.astm.org/4lnz4sr
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM International’s human resource management committee (E63) is developing two proposed standards that will help organizations better understand what #diversity, #equity, and #inclusion (#dei) strategy is and how it can be successfully employed. go.astm.org/48E6SMQ
-
ASTM International
@ASTMIntl
As laboratories scale their operations to include multiple instruments, statistical process control strategies must evolve. The combined Z-chart offers a highly flexible solution. See go.astm.org/3PbpBbM
-
ASTM International
@ASTMIntl
ASTM’s manufacture of #pharmaceutical and #biopharmaceutical products committee (E55) has approved a new standard practice for validating end-user sterilizing filtration of pharmaceutical, biopharmaceutical, and #biological products that will contribute to patient safety.
-
ASTM International
@ASTMIntl
Located in northern Italy, Cimolai Technology has built its reputation on saying yes to the one-of-a-kind. It designs and delivers bespoke mechanical systems that match a client’s needs or desires exactly And they use ASTM standards. go.astm.org/4nieniE
-
ASTM International
@ASTMIntl
STILL TIME TO REGISTER! May 19-21... Phase I Environmental Site Assessment Practices For Commercial Real Estate: Phase I Site Assessment & Transaction Screen. Covers E1527 and E1528. go.astm.org/4nw3iKY
-
ASTM International
@ASTMIntl
The #philippines standards for #petroleum products and facilities are geared toward creating a low-emissions future, and ASTM standards aim to help. go.astm.org/4uzOm0D
-
ASTM International
@ASTMIntl
ASTM's Board of Directors met in West Conshohocken, PA, April 13-15. Here is a summary of reports made and actions taken at those meetings. go.astm.org/4tWosnP
-
ASTM International
@ASTMIntl
New digital systems and next‑generation #aircraft are reshaping what it means to be an #aerospace technician. The committee on aerospace personnel (F46) now has a slate of standards and new work items under development, all geared toward strengthening workforce readiness.
-
ASTM International
@ASTMIntl
JUST ADDED! Phase I #environmental Site Assessments- 1-Day course. Three options: August 19th, October 22nd, and December 15th. All virtual. Covers the ASTM Environmental Site Assessment Standard Practices for the Phase I Site Assessment Process (E1527). go.astm.org/4jDK2Jr
-
ASTM International
@ASTMIntl
Join us at June D02 Committee Week! June 21 to 25 in Chicago, IL. Meetings of: D02 Petroleum Products, Liquid Fuels, and Lubricants; D19 Water; D34 Waste Management. And more! go.astm.org/4crRHZc
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM's #paint and related coatings, materials, and applications committee (D01) has approved a new standard that will be used to help determine the presence and quantify the amount of #lead in new enamel paint samples. go.astm.org/3OHq2e1
-
ASTM International
@ASTMIntl
Located in northern Italy, Cimolai Technology has built its reputation on saying yes to the one-of-a-kind. It designs and delivers bespoke mechanical systems that match a client’s needs or desires exactly And they use ASTM standards. go.astm.org/4nieniE
-
ASTM International
@ASTMIntl
With over 60 countries currently imposing #ethanol mandates of some kind for the #petroleum industry, the need for standards to help convert this abundant resource into usable fuel for #cars, #trucks, and more is essential. go.astm.org/4tWg7jL
-
ASTM International
@ASTMIntl
As laboratories scale their operations to include multiple instruments, statistical process control strategies must evolve. The combined Z-chart offers a highly flexible solution. See go.astm.org/3PbpBbM
-
ASTM International
@ASTMIntl
Performance-Based Façade Design (PBFD) 2026, an ASTM International editorial partner, will take place in Venice, Italy. The Joint European Drone Associations (JEDA) and ASTM International recently announced the signing of a Memorandum of Understanding (MoU). And more!
-
ASTM International
@ASTMIntl
The #philippines standards for #petroleum products and facilities are geared toward creating a low-emissions future, and ASTM standards aim to help. go.astm.org/4uzOm0D
-
ASTM International
@ASTMIntl
ASTM International’s human resource management committee (E63) is developing two proposed standards that will help organizations better understand what #diversity, #equity, and #inclusion (#dei) strategy is and how it can be successfully employed. go.astm.org/48E6SMQ
-
ASTM International
@ASTMIntl
Here are a few ways that ASTM members can maximize the impact they have within their committees. go.astm.org/4doYP97
-
ASTM International
@ASTMIntl
The Workshop on Particle Counting in Liquid #fuels will be held June 15, 2027. Organized by the subcommittee on stability & cleanliness of liquid fuels, it will be held in Indianapolis, Indiana, U.S.A. To participate, authors should submit abstracts no later than October 2, 2026. go.astm.org/42gpNJX
-
ASTM International
@ASTMIntl
ASTM's #paint and related coatings, materials, and applications committee (D01) has approved a new standard that will be used to help determine the presence and quantify the amount of #lead in new enamel paint samples. go.astm.org/3OHq2e1
-
ASTM International
@ASTMIntl
The benefits of standards and a standardized #supplychain are clear: less variability means lower handling costs, fewer delays, and greater confidence in #product integrity, which allows for more #trade between international partners and greater satisfaction for #consumers.
-
ASTM International
@ASTMIntl
ASTM’s board of directors recently approved the creation of a new technical committee on #artificialintelligence (#ai) in #manufacturing systems. The new committee (F50) will focus on frameworks, best practices, and standards for AI technologies in manufacturing.
-
ASTM International
@ASTMIntl
#pfas #remediation and measurement promises to be a global challenge for years to come. A trio of new ASTM standards can help that effort. go.astm.org/4tmuHRE
-
ASTM International
@ASTMIntl
ASTM’s committees on #medical and surgical materials and devices (F04) and consumer products (F15) are helping to ensure that devices for the elderly like the rods, screws, and cages used in spinal fusion procedures; adult bed rails; and more comply with all safety standards.....
-
ASTM International
@ASTMIntl
Members of the committee on sensory evaluation have a fascinating mission: to create standards that will enhance the practice of sensory evaluation of products, materials, information, and services. go.astm.org/3QgDo10
-
ASTM International
@ASTMIntl
ASTM Exo Technology Center of Excellence (ETCoE) will be holding the 2026 Exo Games, August 3–7, at ASTM HQ in West Conshohocken, PA. Interested student teams need to submit a team description paper by June 8, 2026. #exoskeleton See go.astm.org/4lnz4sr
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM's #airquality committee (D22) has approved a new standard that provides instructions for collecting surface samples from workplaces for non-volatile or semi-volatile organic chemicals. go.astm.org/41wloSH
-
ASTM International
@ASTMIntl
From cruise ships to large container ships, maritime safety affects us all – and standards help lead the charge. go.astm.org/4rEUVOc
-
ASTM International
@ASTMIntl
Members of the committee on sensory evaluation have a fascinating mission: to create standards that will enhance the practice of sensory evaluation of products, materials, information, and services. go.astm.org/3QgDo10
-
ASTM International
@ASTMIntl
ASTM’s committees on #medical and surgical materials and devices (F04) and consumer products (F15) are helping to ensure that devices for the elderly like the rods, screws, and cages used in spinal fusion procedures; adult bed rails; and more comply with all safety standards.....
-
ASTM International
@ASTMIntl
ASTM standards help Adams #magnetic Products @AdamsMagnetic reduce risk and improve consistency in permanent #magnet applications. Learn more about their use of ASTM standards in the new "Business Case" from the latest issue of STANDARDIZATION NEWS... go.astm.org/4rarxOV
-
ASTM International
@ASTMIntl
SAVE THE DATE! ASTM International is hosting its 7th Annual Autonomy in Aviation Symposium, organized by ASTM’s autonomy design and operations in aviation administrative committee (AC377). The symposium will be held Oct. 5-6, 2026, in Jacksonville, FL. go.astm.org/4cKdpqr
-
ASTM International
@ASTMIntl
In today’s modern business world, standards are playing a critical role in minimizing risk. And new standards from the committee on homeland security applications (E54) aim to create a common language and approach to enterprise #riskmanagement to minimize those risks.
-
ASTM International
@ASTMIntl
ASCET Center of Excellence has released environmental scan that maps the current quantum standardization landscape — spanning computing, communications, sensing, and measurement — identifying pre-standardization gaps most consequential to sustained U.S. leadership in the field.
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) invites interested parties to join in developing a proposed standard on nature-based solutions for #urban #heat. go.astm.org/4bLuzVv
-
ASTM International
@ASTMIntl
From cruise ships to large container ships, maritime safety affects us all – and standards help lead the charge. go.astm.org/4rEUVOc
-
ASTM International
@ASTMIntl
ASTM's digital information in the #supplychain committee (F49) has approved three new standards that combine with the standard terminologies for goods movement process (GMP) (F3682) and relating to supply chain stakeholders (F3776). go.astm.org/4tXSkQk
-
ASTM International
@ASTMIntl
Thank you to all of our board members for a productive weeks of meetings — and the time spent together building lasting relationships. #astmproud
-
ASTM International
@ASTMIntl
ASTM’s committees on #medical and surgical materials and devices (F04) and consumer products (F15) are helping to ensure that devices for the elderly like the rods, screws, and cages used in spinal fusion procedures; adult bed rails; and more comply with all safety standards.....
-
ASTM International
@ASTMIntl
Members of the committee on sensory evaluation have a fascinating mission: to create standards that will enhance the practice of sensory evaluation of products, materials, information, and services. See go.astm.org/3QgDo10
-
ASTM International
@ASTMIntl
#pfas #remediation and measurement promises to be a global challenge for years to come. A trio of new ASTM standards can help that effort. go.astm.org/4tmuHRE
-
ASTM International
@ASTMIntl
Workshop on #artificialintelligence Applied to #hydrocarbon Analysis and ASTM Test Methods. December 8, 2026 in Orlando. Organized by committee D02's on gas #chromatography methods subcommittee. To participate, submit abstract by June 30. See go.astm.org/4cMc8jD
-
ASTM International
@ASTMIntl
From cruise ships to large container ships, maritime safety affects us all – and standards help lead the charge. go.astm.org/4rEUVOc
-
ASTM International
@ASTMIntl
STILL PLENTY OF TIME TO REGISTER! Join Us for June 2026 Committee Week in Dallas, May 31st to June 5th. Meetings of: C09 Concrete and Concrete Aggregates; D08 Roofing and Waterproofing; D37 Cannabis; E07 Nondestructive Testing; and more! go.astm.org/4rUKt4m
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Congratulations to Jim Mason, retired consulting polymer scientist, and formerly of Mason Materials Development, LLC, for receipt of ASTM's Thompson Memorial Award. go.astm.org/4cIH3NP
-
ASTM International
@ASTMIntl
ASTM's #airquality committee (D22) has approved a new standard that provides instructions for collecting surface samples from workplaces for non-volatile or semi-volatile organic chemicals. go.astm.org/41wloSH
-
ASTM International
@ASTMIntl
n today’s modern business world, standards are playing a critical role in minimizing risk. And new standards from the committee on homeland security applications (E54) aim to create a common language and approach to enterprise #riskmanagement to minimize those risks.
-
ASTM International
@ASTMIntl
STILL TIME TO REGISTER! Join ASTM International's #pharmaceutical and #biopharmaceutical manufacturing committee (E55) for a two-day industry-led workshop, May 5th and 6th, in Prague. go.astm.org/4uqbSxQ
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
How hot do you like it? Learn how sensory standards add spice to your life. Join host David Walsh and his guest Sensory Manager Ali Schultz as they discuss standards for sensory evaluation from ASTM committee E18. Listen wherever you get your podcasts, or...
-
ASTM International
@ASTMIntl
ASTM has developed a standard (E3503) that will address a specific need in the #ethanol industry: measuring #corn kernel fiber conversion for various applications, including regulatory pathways. go.astm.org/4bgSDzJ
-
ASTM International
@ASTMIntl
THERE'S STILL TIME!!!! Join Us for May 2026 Committee Week in Dallas! May 3-8 at the Hyatt Regency for meetings of 26 committees, including D15 Engine Coolants and Related Fluids, E08 Fatigue and Fracture, E56 Nanotechnology, and many more! go.astm.org/4ahgVaw
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) invites interested parties to join in developing a proposed standard on nature-based solutions for #urban #heat. go.astm.org/4bLuzVv
-
ASTM International
@ASTMIntl
Cold #beer. Hot coffee. Spicy food. Learn how sensory scientists evaluate aroma, mouthfeel, flavors, and more in the things you use and enjoy every day. Join our guest Ali Schultz @newbelgiumbeer as we discuss sensory science on ASTM's podcast. Listen where you get your podcasts... or visit go.astm.org/standards-impact-S4E2
-
ASTM International
@ASTMIntl
Join Us at D02 June Committee Week in Chicago! June 21-25. Meetings of: D02 Petroleum Products, Liquid Fuels, and Lubricants; D03 Gaseous Fuels; D19 Water D34 Waste Management; E48 Bioenergy and Industrial Chemicals from Biomass; and more! go.astm.org/4crRHZc
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
From cruise ships to large container ships, maritime safety affects us all – and standards help lead the charge. go.astm.org/4rEUVOc
-
ASTM International
@ASTMIntl
KATHERINE & BRYANT MATHER SCHOLARSHIP... DEADLINE APRIL 30. Available to undergrad students completing their sophomore year, or grad students who are pursuing degrees either specializing in cement or concrete materials technology, or concrete construction. Get application form... go.astm.org/4bQYefI
-
ASTM International
@ASTMIntl
STILL TIME TO REGISTER! Join us tomorrow, April 7, at 9am EST for ASTM Compass®: Built to Engineer Innovation, a no-cost solution-focused demonstration tailored for engineering teams who want to accelerate decision making, reduce research time, and keep complex projects on track.
-
ASTM International
@ASTMIntl
In today’s modern business world, standards are playing a critical role in minimizing risk. And new standards from the committee on homeland security applications (E54) aim to create a common language and approach to enterprise #riskmanagement to minimize those risks.
-
ASTM International
@ASTMIntl
ASTM International’s Exo Technology Center of Excellence (ET CoE) will be holding the 3rd Annual Exo Games, an initiative to improve student involvement and education in the exo technologies industry, from Aug. 3-7 at the ASTM International headquarters in West Conshohocken, PA.
To learn more about the event — including sponsorship opportunities — visit go.astm.org/4lnz4sr -
ASTM International
@ASTMIntl
ASTM's bathtub and #shower structures subcommittee (F15.03) has approved the formation of a new task group that will develop a proposed safety standard for adult #showerchairs and stools. go.astm.org/4dXYuLj
-
ASTM International
@ASTMIntl
ASTM's gaseous fuels committee (D03) seeks new members! Join us in developing standards for gases used as commercial fuels! And consider attending your first committee meeting in Chicago on June 21-25, 2026 in Chicago, IL... go.astm.org/committee-d03
-
ASTM International
@ASTMIntl
ASTM has developed a standard (E3503) that will address a specific need in the #ethanol industry: measuring #corn kernel fiber conversion for various applications, including regulatory pathways. go.astm.org/4bgSDzJ
-
ASTM International
@ASTMIntl
In today’s modern business world, standards are playing a critical role in minimizing risk. And new standards from the committee on homeland security applications (E54) aim to create a common language and approach to enterprise #riskmanagement to minimize those risks.
-
ASTM International
@ASTMIntl
Nominations are due by July 15 for Charles B. Dudley Publication Award. Winners receive a $2,500 honorarium and a plaque. Presented once a year to an author(s) or editor(s) of a book or paper, or a series, published by ASTM, that has made an impact in its field or industry......
-
ASTM International
@ASTMIntl
Preliminary abstracts for the Symposium on Advancements in #building #insulation for Holistic #energy Benefits and #decarbonization are due by August 31, 2026. The symposium will be held October 27-28, 2027 in New Orleans. go.astm.org/4bFi65w
-
ASTM International
@ASTMIntl
ASTM International’s copper and copper alloys committee (B05) presented its Copper Club Award – to James Barroner, sales and marketing manager at Wieland Small Tube Products. go.astm.org/40YtpQb
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) invites interested parties to join in developing a proposed standard on nature-based solutions for #urban #heat. go.astm.org/4bLuzVv
-
ASTM International
@ASTMIntl
The Joint European #drone Associations (#jeda) and ASTM have signed a Memorandum of Understanding (MoU) at the XPONENTIAL Europe Drone event in Düsseldorf, Germany during the Standards Forum. At center, Julie Garland, JEDA president, shakes hands with ASTM's Sara Gobbi @GobbiSa
-
ASTM International
@ASTMIntl
This year, the Committee on Air Quality (D22) celebrates its 75th anniversary! Festivities at committee week included ASTM's Ashley Wiand receiving the George Luciw Award of Excellence, and Lisa Drennen Drennan getting the Award of Appreciation. With @ASTMpres Andy Kireta (right)
-
ASTM International
@ASTMIntl
Together with the dynamic tools of ASTM Compass®, access over 90,000 British Standards from @BSI_UK that are key to facilitating global trade and ensuring safety and compliance internationally. go.astm.org/4bQzray
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Join Us for ASTM 2026 June Committee Week! May 31 - June 5 in Dallas, Texas. Meetings of: C01 Cement; C09 Concrete and Concrete Aggregates; D04 Road and Paving Materials; D08 Roofing and Waterproofing; E07 Nondestructive Testing; E10 Nuclear Technology and Applications; and more!
This media couldn't be displayed. See it on the original post. -
ASTM International reposted
Andy Kireta
@ASTMpres
Proud to present Ann Marie Virts (left) and Julia Farber (right) each with the James A. Thomas President's Leadership Award. Other awards included the Katherine E. Morgan Women in Leadership Award, Frank W. Reinhart Award, and Werner Gumpertz Award. At @ASTMIntl #committeeweek
-
ASTM International
@ASTMIntl
ASTM's plastics committee (D20) celebrated academic innovation at Committee Week yesterday. An inspiring presentation by Professor Nandika D’Souz @UT_Dallas preceded acknowledgement of student poster presenters (here pictured in photo). Each showcased cutting-edge research.
-
ASTM International
@ASTMIntl
ASTM standards help Adams #magnetic Products @AdamsMagnetic reduce risk and improve consistency in permanent #magnet applications. Learn more about their use of ASTM standards in the new "Business Case" from the latest issue of STANDARDIZATION NEWS... go.astm.org/4rarxOV
-
ASTM International
@ASTMIntl
ASTM International's environmental assessment, risk management and corrective action committee has approved a new standard that will provide a comprehensive overview of sampling methods and concerns specific to per- and polyfluoroalkyl substances (#pfas) in environmental media...
-
ASTM International
@ASTMIntl
ASTM has developed a standard (E3503) that will address a specific need in the #ethanol industry: measuring #corn kernel fiber conversion for various applications, including regulatory pathways. go.astm.org/4bgSDzJ
-
ASTM International
@ASTMIntl
ASTM International’s Exo Technology Center of Excellence (ET CoE) will be holding the 3rd Annual Exo Games, an initiative to improve student involvement and education in the exo technologies industry, from Aug. 3-7 at the ASTM International headquarters in West Conshohocken, PA.
To learn more about the event — including sponsorship opportunities — visit go.astm.org/4lnz4sr -
ASTM International
@ASTMIntl
APRIL 30TH DEADLINE FOR APPLICATIONS: KATHERINE & BRYANT MATHER #scholarship. Available to fulltime undergraduate students completing their sophomore year of college (or later), or graduate students who are pursuing degrees especializing in cement or #concrete materials technology. Get application... go.astm.org/4bQYefI
-
ASTM International
@ASTMIntl
Join Us for May 3-8 for ASTM's May 2026 Committee Week in Dallas, Texas! Attend meetings of E08 Fatigue and Fracture; F04 Medical and Surgical Materials and Devices; F08 Sports Equipment, Playing Surfaces, and Facilities; and so many more! go.astm.org/4ahgVaw
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Gene therapies are #biologics, derived from living organisms. Their development is distinct from other types of #pharmaceuticals. Stability testing is important, and there's a guide for minimizing impact of stability testing on batch yield of low yield biopharmaceutical products.
-
ASTM International
@ASTMIntl
Registration is now open for ASTM's 2026 #masonry Symposium. Taking place in Dallas on June 2, it is hosted by ASTM Committees C01 on #cement, C07 on #lime and #limestone, and C15 on Masonry - Manufactured Masonry Units, #mortars and #grouts. go.astm.org/4dUpic3
-
ASTM International
@ASTMIntl
Are you a new member of ASTM? Dive into our "New Member Orientation" — a free, interactive eLearning experience designed to help you hit the ground running. Move at your own pace through 10 sections of valuable information... go.astm.org/4h5CVYO
-
ASTM International
@ASTMIntl
In today’s modern business world, standards are playing a critical role in minimizing risk. And new standards from the committee on homeland security applications (E54) aim to create a common language and approach to enterprise #riskmanagement to minimize those risks.
-
ASTM International
@ASTMIntl
11th Symposium on Roofing and Waterproofing will be held Dec 5, 2027. Organized by ASTM Committee D08 on Roofing and Waterproofing, it will be held in New Orleans. To participate, authors must submit a 250 to 300-word preliminary abstract no later than June 15, 2026
-
ASTM International
@ASTMIntl
Nominations are due by July 15 for Charles B. Dudley Publication Award. Winners receive a $2,500 honorarium and a plaque. Presented once a year to an author(s) or editor(s) of a book or paper, or a series, published by ASTM, that has made an impact in its field or industry......
-
ASTM International
@ASTMIntl
When developing a standard, committees can help reduce barriers for international adoption and use. From regulatory and legal differences to local terminology and units, learn about these and other challenges facing those who develop standards. go.astm.org/3OEYYM5
-
ASTM International
@ASTMIntl
ASTM's committee on nondestructive testing (E07) recently took steps to take #ndt into the digital age with two revised standards focused on DICONDE (digital imaging and communication in nondestructive evaluation). go.astm.org/4b7s9A5
-
ASTM International
@ASTMIntl
ASTM International's environmental assessment, risk management and corrective action committee has approved a new standard that will provide a comprehensive overview of sampling methods and concerns specific to per- and polyfluoroalkyl substances (#pfas) in environmental media...
-
ASTM International
@ASTMIntl
ASTM International’s Exo Technology Center of Excellence (ET CoE) will be holding the 3rd Annual Exo Games, an initiative to improve student involvement and education in the exo technologies industry, from Aug. 3-7 at the ASTM International headquarters in West Conshohocken, PA.
To learn more about the event — including sponsorship opportunities — visit go.astm.org/4lnz4sr -
ASTM International
@ASTMIntl
CALL FOR PAPERS! 12th Symposium on Performance of Protective Clothing and Equipment will be held Feb 3-4, 2027. Organized by ASTM Committee F23 on Personal Protective Clothing and Equipment, it will be held New Orleans, Louisiana. To participate, abstract due by Aug 7, 2026.
-
ASTM International
@ASTMIntl
ASTM’s #consumerproducts committee (F15) has approved a new standard for wearable sleep products worn by #infants and #toddlers. The standard attempts to minimize hazards such as suffocation, strangulation, and choking. go.astm.org/4amPGg2
-
ASTM International
@ASTMIntl
ASTM has developed a standard (E3503) that will address a specific need in the #ethanol industry: measuring #corn kernel fiber conversion for various applications, including regulatory pathways. go.astm.org/4bgSDzJ
-
ASTM International
@ASTMIntl
ASTM standards help Adams #magnetic Products @AdamsMagnetic reduce risk and improve consistency in permanent #magnet applications. Learn more about their use of ASTM standards in the new "Business Case" from the latest issue of STANDARDIZATION NEWS... go.astm.org/4rarxOV
-
ASTM International
@ASTMIntl
A new ASTM standard will encourage the consideration of the entire life cycle of tires by providing a classification system for recovered carbon black (rCB), a semi-reinforcing filler obtained from post-consumer rubber products such as tires and conveyor belts. #circulareconomy
-
ASTM International
@ASTMIntl
ASTM International’s committee on ships and marine technology (F25) have standards to help ensure the safe and efficient operation of large container ships.
Learn more at go.astm.org/4rEUVOc -
ASTM International
@ASTMIntl
Workshop on Detection Limits and Censoring Data in Workplace Exposure Assessment will be held Oct 8. Organized by ASTM Committee D22 on Air Quality, it will be held in Jacksonville, Florida. To participate, submit abstract no later than May 31. go.astm.org/4rWcARB
-
ASTM International
@ASTMIntl
When developing a standard, committees can help reduce barriers for international adoption and use. From regulatory and legal differences to local terminology and units, learn about these and other challenges facing those who develop standards. go.astm.org/3OEYYM5
-
ASTM International
@ASTMIntl
CALL FOR PAPERS DEADLINE EXTENDED TO MARCH 14! ASTM Committee C26 on Nuclear Fuel Cycle will be holding its spring standards development meetings and the Conference on the Development of the HALEU Fuel Cycle the week of June 15-19 in Chester, UK... go.astm.org/4oZwrx5
-
ASTM International
@ASTMIntl
ASTM’s #consumerproducts committee (F15) has approved a new standard for wearable sleep products worn by #infants and #toddlers. The standard attempts to minimize hazards such as suffocation, strangulation, and choking. go.astm.org/4amPGg2
-
ASTM International
@ASTMIntl
Registration is now open for The Workshop on #hip #impingement Testing that will be held May 5th. Organized by ASTM Committee F04 on #medical and #surgical Materials and Devices, it will be held in Dallas, Texas. go.astm.org/4kLzJBX
-
ASTM International
@ASTMIntl
In today’s modern business world, standards are playing a critical role in minimizing risk. And new standards from the committee on homeland security applications (E54) aim to create a common language and approach to enterprise #riskmanagement to minimize those risks.
-
ASTM International
@ASTMIntl
The Industry Scientific Exchange on Sterile Manufacturing will be held May 5-6. A 2-day, industry-led exchange focused on identifying gaps and challenges in meeting manufacturing and compliance associated with sterile manufacturing requirements, it will be held in Prague...
-
ASTM International
@ASTMIntl
Risk has always been a part of human society in general and the business world in particular. Standards to create a common language and approach to enterprise #riskmanagement aim to minimize those risks. go.astm.org/40cX73t
-
ASTM International
@ASTMIntl
When developing a standard, committees can help reduce barriers for international adoption and use. From regulatory and legal differences to local terminology and units, learn about these and other challenges facing those who develop standards. go.astm.org/3OEYYM5
-
ASTM International
@ASTMIntl
ASTM standards help Adams #magnetic Products @AdamsMagnetic reduce risk and improve consistency in permanent #magnet applications. Learn more about their use of ASTM standards in the new "Business Case" from the latest issue of STANDARDIZATION NEWS... go.astm.org/4rarxOV
-
ASTM International
@ASTMIntl
ASTM’s committees on #medical and surgical materials and devices (F04) and consumer products (F15) are helping to ensure that devices for the elderly like the rods, screws, and cages used in spinal fusion procedures; adult bed rails; and more comply with all safety standards.....
-
ASTM International
@ASTMIntl
A new ASTM standard will encourage the consideration of the entire life cycle of tires by providing a classification system for recovered carbon black (rCB), a semi-reinforcing filler obtained from post-consumer rubber products such as tires and conveyor belts. #circulareconomy
-
ASTM International
@ASTMIntl
ASTM’s digital information in the supply chain committee has revised its guide for supply chain traceability, authentication, verification, validation, and oversight using emerging technologies including blockchain. go.astm.org/3KnwOTO
-
ASTM International
@ASTMIntl
45th Symposium on Pesticide Formulation and Delivery Systems: Formulation and Regulatory Change Driven by Environmental and Market Conditions will be held Oct 6-8 in Jacksonville, Florida. Will discuss formulation and application technologies associated with crop protection.
-
ASTM International
@ASTMIntl
Are you a new member of ASTM? Dive into our "New Member Orientation" — a free, interactive eLearning experience designed to help you hit the ground running. Move at your own pace through 10 sections of valuable information... go.astm.org/4h5CVYO
-
ASTM International
@ASTMIntl
ASTM’s #consumerproducts committee (F15) has approved a new standard for wearable sleep products worn by #infants and #toddlers. The standard attempts to minimize hazards such as suffocation, strangulation, and choking. go.astm.org/4amPGg2
-
ASTM International
@ASTMIntl
Heads-up displays in goggles — and more — are coming to your favorite cold-weather #sports. Join guests Earl Saline @NSAA_org, and Evangelos Spyrou @CCMHockey, as they discuss how standards support both amateurs and the next generation Olympic athletes. Wherever you get podcasts... or go.astm.org/podcast-winter-sports-standards
-
ASTM International
@ASTMIntl
Join us March 22-27, 2026 in Dallas, TX, for April Committee Week! Participate in the standards development work of ASTM committees. See old friends. Meet new ones. Full list of committees... na.eventscloud.com/website/83835/
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Gene therapies are #biologics, derived from living organisms. Their development is distinct from other types of #pharmaceuticals. Stability testing is important, and there's a guide for minimizing impact of stability testing on batch yield of low yield biopharmaceutical products.
-
ASTM International
@ASTMIntl
ASTM’s Smart and Sustainable Manufacturing Systems journal is launching an Early Career Editorial Board. Interested in joining? Email CV to aconaway@astm.org. More info... go.astm.org/4rmWekF
-
ASTM International
@ASTMIntl
ASTM’s human resource management committee (E63) is developing a proposed standard that will focus on the use of #artificialintelligence (#ai) in the #recruitment and #hiring process to help create modern hiring standards. go.astm.org/4qlDoJl
-
ASTM International
@ASTMIntl
ASTM's Emerging Professionals (EP) program seeks to create opportunities that facilitate participation for any new members who have demonstrated potential to be industry and committee leaders. Nominate a colleague today for the June 2nd workshop in Dallas! go.astm.org/43N9qqg
-
ASTM International
@ASTMIntl
Join us March 22-27, 2026 in Dallas, TX, for April Committee Week! Meetings of: D20 Plastics; E06 Performance of Buildings; E60 Sustainability; F17 Plastic Piping Systems; F45 Robotics, Automation, and Autonomous Systems; and more! go.astm.org/4k2BUlJ
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM’s #consumerproducts committee (F15) has approved a new standard for wearable sleep products worn by #infants and #toddlers. The standard attempts to minimize hazards such as suffocation, strangulation, and choking. go.astm.org/4amPGg2
-
ASTM International
@ASTMIntl
Looking to train your team on Property Condition Assessments (#pca) quickly and consistently? Our PCA #elearning course is designed to help learners become familiar with the standard while providing a flexible, efficient way to train teams at scale. go.astm.org/3MPgjRF
-
ASTM International
@ASTMIntl
Today, ASTM International announced the release of Wohlers Report 2026 through its digital platform — continuing a 31-year tradition of providing trusted analysis of the global #additivemanufacturing sector. go.astm.org/4aTTiGu
-
ASTM International
@ASTMIntl
A new ASTM standard will encourage the consideration of the entire life cycle of tires by providing a classification system for recovered carbon black (rCB), a semi-reinforcing filler obtained from post-consumer rubber products such as tires and conveyor belts. #circulareconomy
-
ASTM International
@ASTMIntl
Have you checked out our Instagram channel lately? More videos. More infographics. More fun! Visit go.astm.org/4rRvN6O
-
ASTM International
@ASTMIntl
While it is globally available, #bungeejumping is only locally regulated. What never existed was a single, international, consensus-based standard that brought all of that together. Until now. go.astm.org/4rrgDER
-
ASTM International
@ASTMIntl
New to ASTM? Interested in joining? Check out this overview of how our volunteer members can take a new idea all the way to a new standard. go.astm.org/49aiyHL
-
ASTM International
@ASTMIntl
Gene therapies are #biologics, derived from living organisms. Their development is distinct from other types of #pharmaceuticals. Stability testing is important, and there's a guide for minimizing impact of stability testing on batch yield of low yield biopharmaceutical products.
-
ASTM International
@ASTMIntl
Advance standards! Transform markets! Join us for May 2026 Committee Week! May 3-8 in Dallas, TX. Meetings of: C11 Gypsum and Related Building Materials and Systems; E04 Metallography; E08 Fatigue and Fracture; E28 Mechanical Testing; F16 Fasteners; and so many more!
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM’s human resource management committee (E63) is developing a proposed standard that will focus on the use of #artificialintelligence (#ai) in the #recruitment and #hiring process to help create modern hiring standards. go.astm.org/4qlDoJl
-
ASTM International
@ASTMIntl
LIVE TRAINING: Environmental Liabilities Course. May 4th at ASTM headquarters in West Conshohocken, PA. Reviews five key ASTM documents covering the valuation, settlement and reporting of all types of environmental liabilities. go.astm.org/4qAZUOQ
-
ASTM International
@ASTMIntl
While it is globally available, #bungeejumping is only locally regulated. What never existed was a single, international, consensus-based standard that brought all of that together. Until now. www.astm.org/news/standardizing-bungee-jumping
-
ASTM International
@ASTMIntl
The Emerging Professionals Program — which celebrated its 10th anniversary in 2025 —now hosts 5 workshops annually and welcomes nearly 150 EPs each year. go.astm.org/4sMeiWP
-
ASTM International
@ASTMIntl
CALL FOR ABSTRACTS! The Symposium on the Impact of Sustainable Technologies and Electrification on Fire Hazards — to be held June 10-11, 2027 in Rosemont, Illinois — is now accepting abstracts through August, 2026. go.astm.org/4kf2XdX
-
ASTM International
@ASTMIntl
There's still time to register for "Phase I & Phase II Environmental Site Assessment Processes" — to be held February 24-26 in Miami, FL. This course covers ASTM E1527 and E1903. go.astm.org/4pY5Q3S
-
ASTM International
@ASTMIntl
New to ASTM? Interested in joining? Check out this overview of how our volunteer members can take a new idea all the way to a new standard. go.astm.org/49aiyHL
-
ASTM International
@ASTMIntl
Interested parties are invited to an ASTM meeting on standards development for artificial intelligence in manufacturing systems. The proposed activity is intended to complement existing #ai governance efforts, and will be held March 5 at ASTM headquarters in West Conshohocken, PA. go.astm.org/3ZjHYNj
-
ASTM International
@ASTMIntl
With more than 20 years of experience in building and construction materials across the Middle East and North African (MENA) region, Amer Bin Ahmed — 2026 Chair of ASTM's Board of Directors — knows firsthand how standards shape trust, safety, and innovation...
-
ASTM International
@ASTMIntl
ASTM has developed a standard (E3503) that will address a specific need in the #ethanol industry: measuring #corn kernel fiber conversion for various applications, including regulatory pathways. go.astm.org/4bgSDzJ
-
ASTM International
@ASTMIntl
ASTM's digital information in the supply chain committee (F49) will be meeting at April 2026 Committee Week, March 25-26, 2026 in Dallas, TX. Join us in the standards development process. Register today! go.astm.org/4qVSxCf
-
ASTM International
@ASTMIntl
ASTM’s digital information in the supply chain committee has revised its guide for supply chain traceability, authentication, verification, validation, and oversight using emerging technologies including blockchain. go.astm.org/3KnwOTO
-
ASTM International
@ASTMIntl
While it is globally available, #bungeejumping is only locally regulated. What never existed was a single, international, consensus-based standard that brought all of that together. Until now. go.astm.org/4rrgDER
-
ASTM International
@ASTMIntl
The Emerging Professionals Program — which celebrated its 10th anniversary in 2025 —now hosts 5 workshops annually and welcomes nearly 150 EPs each year. go.astm.org/4sMeiWP
-
ASTM International
@ASTMIntl
Gene therapies are #biologics, derived from living organisms. Their development is distinct from other types of #pharmaceuticals. Stability testing is important, and there's a guide for minimizing impact of stability testing on batch yield of low yield biopharmaceutical products.
-
ASTM International
@ASTMIntl
ASTM’s Geotechnical Testing eLearning Program delivers essential training on key ASTM standards used in geotechnical laboratory testing. Learn more at go.astm.org/4adKPfL
-
ASTM International
@ASTMIntl
Check out ASTM's ongoing efforts to support early-career professionals, including participation at a Fatigue and Fracture Symposium. go.astm.org/4pv98vm
-
ASTM International
@ASTMIntl
To assist the #fashion industry with the ins and outs of new technologies, ASTM recently established the subcommittee on 3D digital #fabrics (D13.67) — part of the committee on #textiles (D13). go.astm.org/49aW1KR
-
ASTM International
@ASTMIntl
ASTM is accepting labs for our 2026 #proficiencytesting Programs! 60+ ISO/IEC 17043-Accredited Programs including #petroleum/#fuels, #plastics, #metals, and more. Receive results in as little as 6 weeks. Submit directly to accreditation bodies through our app.
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Preservation of old standards may be useful. In converting material into an ASTM standard, form, style, terminology are areas that require particular attention. Here, we address the rationale for offering these versions of standards, steps taken to make them conform to ASTM style, more. go.astm.org/4qa90CC
-
ASTM International
@ASTMIntl
New to ASTM? Interested in joining? Check out this overview of how our volunteer members can take a new idea all the way to a new standard. go.astm.org/49aiyHL
-
ASTM International
@ASTMIntl
Join us February 23-26, 2026 for the no-cost Virtual Officers' Training Workshop. Learn how to efficiently manage your ASTM responsibilities and take on leadership roles in your committees at this free virtual event for ASTM members. DON'T MISS OUT! REGISTER TODAY...
-
ASTM International
@ASTMIntl
ASTM has developed a standard (E3503) that will address a specific need in the #ethanol industry: measuring #corn kernel fiber conversion for various applications, including regulatory pathways. go.astm.org/4bgSDzJ
-
ASTM International
@ASTMIntl
Join us in welcoming our new hardness testing instructors, Dr. Ehsaan-Reza Bagherian (left) and Ali Saed (right), as we expand ASTM training in the UAE! go.astm.org/4k88W4e
-
ASTM International
@ASTMIntl
Join us March 22-27, 2026 in Dallas, TX, for April Committee Week! Meetings of: D20 Plastics; E06 Performance of Buildings; E60 Sustainability; F45 Robotics, Automation, and Autonomous Systems; and more! go.astm.org/4k2BUlJ
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
The Workshop on Weathering and Durability Testing 2026 will be held on March 11, 2026. Organized by ASTM Committee D01 Paint and Related Coatings, Materials, and Applications and Committee G03 on Weathering and Durability, the workshop will be held virtually.
-
ASTM International
@ASTMIntl
There's still time to register for "Phase I & Phase II Environmental Site Assessment Processes" — to be held February 24-26 in Miami, FL. This course covers ASTM E1527 and E1903. go.astm.org/4pY5Q3S
-
ASTM International
@ASTMIntl
New to ASTM? Interested in joining? Check out this overview of how our volunteer members can take a new idea all the way to a new standard. go.astm.org/49aiyHL
-
ASTM International
@ASTMIntl
ASTM's subcommittee on safety standards for lighters (F15.02) recently approved the formation of two new task groups to work on the development of new standards for flameless-type #lighters that create an arc and torch lighters with a blue flame. go.astm.org/4sv3xHV
-
ASTM International
@ASTMIntl
The adoption of the ASTM standard specification for denatured #ethanol for use as #cooking and #appliance #fuel (E3050) has been critical in ensuring energy efficiency in countries like #mozambique. go.astm.org/4pNVa89
-
ASTM International
@ASTMIntl
Join us February 23-26, 2026 for the no-cost Virtual Officers' Training Workshop. Learn how to efficiently manage your ASTM responsibilities and take on leadership roles in your committees at this free virtual event for ASTM members. DON'T MISS OUT! REGISTER TODAY...
-
ASTM International
@ASTMIntl
Did you know ASTM International sponsors one student annually for a 10-week paid internship in the Washington #internships for Students of #engineering program? Download a flier that provides more information. go.astm.org/3NwbJb3
-
ASTM International
@ASTMIntl
To assist the #fashion industry with the ins and outs of new technologies, ASTM recently established the subcommittee on 3D digital #fabrics (D13.67) — part of the committee on #textiles (D13). go.astm.org/49aW1KR
-
ASTM International
@ASTMIntl
ASTM’s #exoskeletons and #exosuits committee (F48) has approved a new standard that will guide the use of digital human modeling (DHM) in #exoskeleton design, evaluation, and application. go.astm.org/498fqvR
-
ASTM International
@ASTMIntl
ASTM has developed a standard (E3503) that will address a specific need in the #ethanol industry: measuring #corn kernel fiber conversion for various applications, including regulatory pathways. go.astm.org/4bgSDzJ
-
ASTM International
@ASTMIntl
New to ASTM? Interested in joining? Check out this overview of how our volunteer members can take a new idea all the way to a new standard. go.astm.org/49aiyHL
-
ASTM International
@ASTMIntl
Quality assurance starts in the Lab. Train the leaders who set the standards. Taught by the #building industry professionals who help develop ASTM standards, our detailed #construction standards courses will help you learn proper testing procedures. go.astm.org/3NlU069
-
ASTM International
@ASTMIntl
Don't miss "Major Testing Techniques for #plastics: An Introduction," in Atlanta, GA from February 3-5. Covers basic principles, techniques, and equipment for commonly-used mechanical and analytical tests on p#lastic materials. go.astm.org/4pGOB75
-
ASTM International
@ASTMIntl
Gene therapies are #biologics, derived from living organisms. Their development is distinct from other types of #pharmaceuticals. Stability testing is important, and there's a guide for minimizing impact of stability testing on batch yield of low yield biopharmaceutical products.
-
ASTM International
@ASTMIntl
The Symposium on #building Envelope Air Tightness: Design Strategies, Testing, and Impacts will be held March 22-23, 2026. Organized by ASTM Committee E06 on Performance of #buildings, it will be held in Dallas, Texas. #construction See go.astm.org/4knyr0u
-
ASTM International
@ASTMIntl
ASTM's subcommittee on safety standards for lighters (F15.02) recently approved the formation of two new task groups to work on the development of new standards for flameless-type #lighters that create an arc and torch lighters with a blue flame. go.astm.org/4sv3xHV
-
ASTM International
@ASTMIntl
Join us for "Gasoline: Specifications, Testing, and Technology" from March 10-12 in Washington, D.C. This extensive class provides broad coverage of the specifications, testing, technology, and U.S. regulations related to #gasoline. go.astm.org/3YEkPVC
-
ASTM International
@ASTMIntl
ASTM has developed a standard (E3503) that will address a specific need in the #ethanol industry: measuring #corn kernel fiber conversion for various applications, including regulatory pathways. go.astm.org/4bgSDzJ
-
ASTM International
@ASTMIntl
Apply now for the "Norton Memorial Scholarship Award for Women" that encourages women college seniors or first-year graduate students to pursue the study of Physical Metallurgy or Materials Science, with emphasis on relationship of microstructure and properties. DEADLINE: JAN 31.
-
ASTM International
@ASTMIntl
Join us February 13 in San Diego, CA for ASTM's "Phase I Environmental Site Assessments- 1-Day" course. You will gain an understanding of how to use standard E1527 and how it affects the way you do business. go.astm.org/4jDK2Jr
-
ASTM International
@ASTMIntl
The Workshop on Ultrafine Particles: Classification, Characterization, and Instrument Performance Requirements will be held March 26. Organized by ASTM's air quality committee (D22), it will be held in Dallas, Texas. go.astm.org/4jFYPDp
-
ASTM International
@ASTMIntl
Join us February 1-4 in Atlanta for January Committee Week! Meetings of: C26 Nuclear Fuel Cycle; D13 Textiles; D37 Cannabis; F23 Personal Protective Clothing and Equipment. And more! go.astm.org/january-2026-committee-week
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Members of ASTM’s committee on #gypsum and related #building materials and systems (C11) are working to ensure that the necessary standards are up to date and accurately address what’s going on in manufacturing facilities and on #jobsites. go.astm.org/4qiTqor
-
ASTM International
@ASTMIntl
ASTM’s #exoskeletons and #exosuits committee (F48) has approved a new standard that will guide the use of digital human modeling (DHM) in #exoskeleton design, evaluation, and application. go.astm.org/498fqvR
-
ASTM International
@ASTMIntl
The #ascet Center of Excellence has launched the first iteration of its Information and Data Sharing Hub, a new national resource designed to support U.S. leadership in critical and emerging technology (#cet) standardization. go.astm.org/4pwOwCW
-
ASTM International
@ASTMIntl
Check out ASTM's ongoing efforts to support early-career professionals, including participation at a Fatigue and Fracture Symposium. go.astm.org/4pv98vm
-
ASTM International
@ASTMIntl
ASTM's subcommittee on safety standards for lighters (F15.02) recently approved the formation of two new task groups to work on the development of new standards for flameless-type #lighters that create an arc and torch lighters with a blue flame. go.astm.org/4sv3xHV
-
ASTM International
@ASTMIntl
STM’s #exoskeletons and #exosuits committee (F48) has approved a new standard that will guide the use of digital human modeling (DHM) in #exoskeleton design, evaluation, and application. go.astm.org/498fqvR
-
ASTM International
@ASTMIntl
The adoption of the ASTM standard specification for denatured #ethanol for use as #cooking and #appliance #fuel (E3050) has been critical in ensuring energy efficiency in countries like #mozambique. go.astm.org/4pNVa89
-
ASTM International
@ASTMIntl
New to ASTM? Interested in joining? Check out this overview of how our volunteer members can take a new idea all the way to a new standard. go.astm.org/49aiyHL
-
ASTM International
@ASTMIntl
To assist the #fashion industry with the ins and outs of new technologies, ASTM recently established the subcommittee on 3D digital #fabrics (D13.67) — part of the committee on #textiles (D13). go.astm.org/49aW1KR
-
ASTM International
@ASTMIntl
Join us February 23-26, 2026 for the no-cost Virtual Officers' Training Workshop. Learn how to efficiently manage your ASTM responsibilities and take on leadership roles in your committees at this free virtual event for ASTM members. DON'T MISS OUT! REGISTER TODAY...
-
ASTM International
@ASTMIntl
Preservation of old standards may be useful. In converting material into an ASTM standard, form, style, terminology are areas that require particular attention. Here, we address the rationale for offering these versions of standards, steps taken to make them conform to ASTM style, more. go.astm.org/4qa90CC
-
ASTM International
@ASTMIntl
With more than 20 years of experience in building and construction materials across the Middle East and North African (MENA) region, Amer Bin Ahmed — 2026 Chair of ASTM's Board of Directors — knows firsthand how standards shape trust, safety, and innovation...
-
ASTM International
@ASTMIntl
The manufacture of #biologics, such as gene therapies and #vaccines, is a unique process with unique challenges. Standards are being developed to help. go.astm.org/4snW4KQ
-
ASTM International
@ASTMIntl
From California to Canada, wildfires impacted millions in 2025. No surprise then that the most-read STANDARDIZATION NEWS article of 2025 was "Standards Support Fire Safety." SN will return in 2026 with more of the stories you have come to rely on for info about ASTM standards... Happy New Year! www.astm.org/news/standards-support-fire-safety
-
ASTM International
@ASTMIntl
Done with holiday cheer (already?) and want to consider some warm-weather fun? "The Brave New – Virtual – World of Amusement Parks" and how standards will address the technology comes in at number two on this year’s list of most-read STANDARDIZATION NEWS feature articles of 2025.
-
ASTM International
@ASTMIntl
The 3rd most-read STANDARDIZATION NEWS feature article of 2025 isn't rubbish, although it is about "Two Standards for Composting." www.astm.org/news/two-standards-for-composting
-
ASTM International
@ASTMIntl
"Standards for the Hidden Dangers of Gates," which covers new standards for the horizontal sliding gates that we see in everyday life — combined with the moving story of the non-profit Hummingbird Alliance — was 4th on the top ten list of STANDARDIZATION NEWS articles of 2025.
-
ASTM International
@ASTMIntl
The super-abundance of stuff generated by the ever-expanding global economy created conditions necessary for the growth of the circular design movement for things like textiles. Find out how standardards are helping with product design in the 5th most-read article of 2025.
-
ASTM International
@ASTMIntl
New standards published this year from ASTM are propelling the field of stem cell research forward. Check out our 6th most popular STANDARDIZATION NEWS article of the year. www.astm.org/news/standards-and-the-future-of-stem-cell-r…
-
ASTM International
@ASTMIntl
A new standard aims to measure climate at the local level. Check out "Climate Mapping Standard Aims to Make Climate Local," the 7th most popular STANDARDIZATION NEWS article of 2025. www.astm.org/news/climate-mapping-standard-aims-make-clim…
-
ASTM International
@ASTMIntl
Exoskeleton technology and firefighting? Check out our 9th most popular STANDARDIZATION NEWS feature article of 2025, "Standards Enter the Breach." www.astm.org/news/exoskeleton-standards-for-firefighters-…
-
ASTM International
@ASTMIntl
Our countdown of the top STANDARDIZATION NEWS feature articles of the year begins with no. 10: "4 Standards for Safer Correctional Facilities." Join us every day until December 31 when we reveal the top article of 2025! www.astm.org/news/4-standards-for-safer-correctional-faci…
-
ASTM International
@ASTMIntl
ASTM International’s building seals and #sealants committee (C24) is developing a proposed standard that will help provide details to users and manufacturers on how sealant products perform as installed. go.astm.org/46zAV6d
-
ASTM International
@ASTMIntl
ASTM Committee C26 on #nuclear Fuel Cycle will be holding its spring standards development meetings and the Conference on the Development of the HALEU Fuel Cycle from June 15-19, 2026 in Chester, United Kingdom. go.astm.org/4oZwrx5
-
ASTM International
@ASTMIntl
ASTM International formed a subcommittee on #petproducts (F15.05) in 2022. It has since grown to include more than 114 members and 86 companies from 10 countries. Learn more in a new STANDARDIZATION NEWS feature... go.astm.org/4pHIrEE
-
ASTM International
@ASTMIntl
Celebrating its 20th annivesary this year, ASTM's #nanotechnology committee (E56) honored its twenty “founding members”, who have served on the committee since its formation. Learn more about the committee at go.astm.org/45aBd3z
-
ASTM International
@ASTMIntl
As of December 31st, 2025, ASTM’s agreement with Accuris will terminate. Any of Accuris’ customer subscriptions for ASTM content, entered into during 2025, will be honored.
-
ASTM International
@ASTMIntl
If you saw a #beef cut with a "choice" label next to one with a "select" label, would you know which was the better grade? A standard holds the key. go.astm.org/47Tn9gV
-
ASTM International
@ASTMIntl
ASTM’s #exoskeletons and #exosuits committee (F48) has approved a new standard that will guide the use of digital human modeling (DHM) in #exoskeleton design, evaluation, and application. go.astm.org/498fqvR
-
ASTM International
@ASTMIntl
ASTM’s #analyticalchemistry for #metals, #ores, and related materials committee (E01) has approved a new test method that will fill the technical gap in performance-based inductively coupled plasma atomic emission spectrometry (ICP-AES) analysis for low alloy #steel. More info at
-
ASTM International
@ASTMIntl
Join us February 1-4 in Atlanta for January Committee Week. Meetings of C26 Nuclear Fuel Cycle; D18 Soil and Rock; D37 Cannabis; F13 Pedestrian/Walkway Safety and Footwear; and more! go.astm.org/january-2025-committee-week
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM’s consumer products committee (F15) has approved a new standard — developed by its #petproducts subcommittee — for the safety of #dog harnesses used in motor vehicles. go.astm.org/4nUnbK4
-
ASTM International
@ASTMIntl
ASTM’s ASCET Center of Excellence has announced the membership for its inaugural advisory board. The first convening of the inaugural ASCET Advisory Board will occur in mid-December of 2025. ASCET – Advancing Standardization for Critical and Emerging Technologies.
-
ASTM International reposted
Andy Kireta
@ASTMpres
#astmproud to honor outgoing ASTM Board Chair Cassy Robinson and incoming 2026 Chair Amer Bin Ahmed in our Board Leadership Transition Ceremony at Committee Week in Atlanta last night.
-
ASTM International
@ASTMIntl
The Sixth Symposium on Evaluation of Existing and New Sensor Technologies for Fatigue, Fracture, and #mechanical Testing will be held Nov 4, 2026. Organized by ASTM Committees E08 on #fatigue and #fracture and E28 on Mechanical #testing, it will be held in Jacksonville, Florida.
-
ASTM International
@ASTMIntl
Build stronger teams with TRUSTED #concrete TRAINING from ASTM! Built to reduce the impact of turnover and simplify onboarding, each course delivers interactive standards-based content, video demos, and auto-graded quizzes... plus, a certificate from ASTM! go.astm.org/3XJhPGT
-
ASTM International
@ASTMIntl
Symposium on Structural Material Challenges for the Long-Term Operation of #nuclear #powerplants will be held Feb 4-5. Organized by Committee E10 on Nuclear Technology and Applications, it will be held in Atlanta, and provides a forum for an international exchange of ideas.
-
ASTM International
@ASTMIntl
Join us for a brief informational webinar to learn what ASTM-PEER® — a new expert-led peer review program designed to enhance the quality, consistency, and credibility of Phase I #environmental Site Assessment (ESA) reports. January 5, 2026 at 10:00 AM EST; for more info, see...
-
ASTM International
@ASTMIntl
ASTM's #exoskeletons and #exosuits committee has launched a new task group focused on developing mechanical testing protocols for exoskeletons. This task group is a critical step toward harmonizing global standards and enabling real-world certification for exoskeletons. #exo See... go.astm.org/47Fw05M
-
ASTM International
@ASTMIntl
Join us February 23-26, 2026 for the no-cost Virtual Officers' Training Workshop. Learn how to efficiently manage your ASTM responsibilities and take on leadership roles in your committees at this free virtual event for ASTM members. go.astm.org/4aE0V3Y
-
ASTM International
@ASTMIntl
ASTM International’s recovered carbon black (#rcb) committee (D36) is developing a proposed standard that will help enable a manufacturer to significantly improve their production process monitoring abilities and improve productivity. go.astm.org/46YndvD
-
ASTM International
@ASTMIntl
ASTM’s committee on robotics, automation, and autonomous systems (F45) has launched a new Additive Construction Robot Safety Task Group, marking ASTM’s first formal initiative dedicated to safety of robotic systems used in additive construction and automated building processes.
Learn more at go.astm.org/4nMG4OZ -
ASTM International
@ASTMIntl
If you saw a #beef cut with a "choice" label next to one with a "select" label, would you know which was the better grade? A standard holds the key. go.astm.org/47Tn9gV
-
ASTM International
@ASTMIntl
Yesterday, ASTM's Global Cooperation Team welcomed seven visitors to ASTM headquarters who are attending the Standards Expert Program (SEP) and the Technical Visitor Grant Program (TVGP). For more info about in-residence training, see go.astm.org/48d48pM
-
ASTM International
@ASTMIntl
ASTM will attend #acecon 2025 in Hyderabad, India as a supporting and standards partner. The Asian Conference on Ecstasy in Concrete (ACECON 2025), will held by The Hyderabad Centre of the Indian Concrete Institute (ICI) Dec 8-10 in Hyderabad, India. go.astm.org/4an1GhK
-
ASTM International
@ASTMIntl
TIME'S RUNNING OUT! Register today for the no-cost webinar "Advance #laboratory Excellence with ASTM’s Lab Quality Management Certificate"
on Tuesday, December 9th, 2025 at 11:00 AM EST. go.astm.org/3XrUppu -
ASTM International
@ASTMIntl
A proposed standard — being developed by ASTM International’s #airquality committee — would be used to help assess environmental #odors. It will present a general strategy for an analytic, odorant-prioritization-based approach to environmental odor assessment.
-
ASTM International
@ASTMIntl
ASTM's magnetic properties committee (A06) is developing a proposed standard that will explain how to measure the pull force of #magnets. Member Michael Devine notes that many industries have their own proprietary method for pull testing, which can produce wildly different values. go.astm.org/3LzrOMd
-
ASTM International
@ASTMIntl
ASTM's digital information in the supply chain committee (F49) has revised its guide for #supplychain traceability, authentication, verification, validation, and oversight using emerging technologies including blockchain (D8558). go.astm.org/3KnwOTO
-
ASTM International
@ASTMIntl
A new ASTM International standard will provide guidance for estimating, evaluating, reducing, and documenting risks associated with personnel and the public interacting with an #amusementride or device. go.astm.org/4a9XkKO
-
ASTM International
@ASTMIntl
ASTM’s consumer products committee (F15) has approved a new standard — developed by its #petproducts subcommittee — for the safety of #dog harnesses used in motor vehicles. go.astm.org/4nUnbK4
-
ASTM International
@ASTMIntl
ASTM relies on its volunteer members to create world-class consensus standards, which is why ASTM offers various training opportunities for those members. go.astm.org/4oMC1nk
-
ASTM International
@ASTMIntl
ASTM International’s building seals and #sealants committee (C24) is developing a proposed standard that will help provide details to users and manufacturers on how sealant products perform as installed. go.astm.org/46zAV6d
-
ASTM International
@ASTMIntl
If you saw a #beef cut with a "choice" label next to one with a "select" label, would you know which was the better grade? A standard holds the key. go.astm.org/47Tn9gV
-
ASTM International
@ASTMIntl
As a direct customer of ASTM International, you'll have flexible format options, innovative, collaborative tools and multimedia, and access to subject matter experts. ASTM Compass® is your all-in-one platform for standards management. go.astm.org/compass
-
ASTM International
@ASTMIntl
The reservation cutoff date for December Committee Week — December 7-11 in Atlanta, GA — has been EXTENDED to November 25th! Be sure to lock in your hotel reservation before the cutoff date. For more information, see go.astm.org/3IMJnY5
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM’s committee on #robotics, #automation, and autonomous systems (F45) has launched a new Additive #construction #robot Safety Task Group, marking ASTM’s first formal initiative dedicated to safety of robotic systems used in additive construction and automated building processes. go.astm.org/4nMG4OZ
-
ASTM International
@ASTMIntl
A proposed standard — being developed by ASTM International’s #airquality committee — would be used to help assess environmental #odors. It will present a general strategy for an analytic, odorant-prioritization-based approach to environmental odor assessment.
-
ASTM International
@ASTMIntl
#workforce development trainings offer learners the opportunity to gain knowledge and get hands-on experience with the standards that shape their field. Learn more... go.astm.org/3JsI2Gj
-
ASTM International
@ASTMIntl
At @GCCELAB in Jazan, Saudi Arabia yesterday, ASTM formerly signed a Memorandum of Understanding (MoU) with #gulf #laboratory Company for Technical Services (GCC LAB). L-R: Saleh Al-Amri, CEO; Chief Technical Officer Ibrahim Al-Athwan; and ASTM's Nick Ecart.
-
ASTM International
@ASTMIntl
As awareness of new technical advances like #ai and #cryptocurrency continues to grow, one aspect of that growth is often overlooked: the enormous amount of #electricity required to run massive #datacenters. Standards for #electrical conductors will help utilities meet the demand... go.astm.org/48VHJy1
-
ASTM International
@ASTMIntl
ASTM International’s recovered carbon black (#rcb) committee (D36) is developing a proposed standard that will help enable a manufacturer to significantly improve their production process monitoring abilities and improve productivity. go.astm.org/46YndvD
-
ASTM International
@ASTMIntl
ASTM International general #aviation #aircraft committee (F44) has approved a new standard that will provide a means of compliance for certification of inflatable restraints, popularly known as #airbags. go.astm.org/42JJ0Ey
-
ASTM International
@ASTMIntl
ASTM’s consumer products committee (F15) has approved a new standard — developed by its #petproducts subcommittee — for the safety of #dog harnesses used in motor vehicles. go.astm.org/4nUnbK4
-
ASTM International
@ASTMIntl
STILL TIME TO REGISTER FOR VIRTUAL TRAINING: "Phase I #environmental Site Assessment Practices For Commercial #realestate: Phase I Site Assessment & Transaction Screen," November 24-25. For more information, visit go.astm.org/47WJqsG
-
ASTM International
@ASTMIntl
ASTM relies on its volunteer members to create world-class consensus standards, which is why ASTM offers various training opportunities for those members. go.astm.org/4oMC1nk
-
ASTM International
@ASTMIntl
ASTM's #exoskeletons and #exosuits committee has launched a new task group focused on developing mechanical testing protocols for exoskeletons. This task group is a critical step toward harmonizing global standards and enabling real-world certification for exoskeletons. #exo See...go.astm.org/47Fw05M
-
ASTM International
@ASTMIntl
Emmanuel Escoto Gonzalez, manager of global cooperation, has arrived in Belém to represent ASTM International at the COP30 Brazil #climatechange Conference 2025. @Cop30noBrasil
-
ASTM International
@ASTMIntl
ASTM's magnetic properties committee (A06) is developing a proposed standard that will explain how to measure the pull force of #magnets. Member Michael Devine notes that many industries have their own proprietary method for pull testing, which can produce wildly different values. go.astm.org/3LzrOMd
-
ASTM International
@ASTMIntl
Congrats to R. Bryan Ormond for being named 2025 ASTM Professor of the Year. Associate professor and director of the Milliken Textile Protection and Comfort Center at North Carolina State University @ncstate, Ormond uses standards in teaching new generations of PPE researchers.
-
ASTM International
@ASTMIntl
Celebrating its 10th anniversary, ASTM's Emerging Professionals Program continues to guide members who have demonstrated the potential to be industry and committee leaders. Here at Committee Week in Atlanta, 28 of 33 nominees were in attendance. Want to nominate someone for 2026? See go.astm.org/43N9qqg
-
ASTM International
@ASTMIntl
"An enterprise license with ASTM makes it easy for you to conduct your business," says John Gallagher, director of global sales. Learn how a direct license to ASTM Compass® gives you a closer connection to the experts who are shaping the standards that help make industries safer.
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM’s committee on #robotics, #automation, and autonomous systems (F45) has launched a new Additive #construction #robot Safety Task Group, marking ASTM’s first formal initiative dedicated to safety of robotic systems used in additive construction and automated building processes. go.astm.org/4nMG4OZ
-
ASTM International
@ASTMIntl
Did you know that ASTM has standards for the testing of ballistic shields? Used by #lawenforcement, these tactical shields are designed to stop or deflect projectiles. E3141 and E3347 are standards that include the test method used to evaluate ballistic resistance of such shields. To purchase standards, see go.astm.org/4gKIqfo
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
REGISTER NOW BEFORE IT'S TOO LATE! Join us this Wednesday, November 12th at 9:30am ET for a no-cost tour of both of our technical content platforms: ASTM Compass® and the ASTM Digital Library. event.on24.com/wcc/r/5062609/65D22B167E0680199E588B7AB91B…
-
ASTM International
@ASTMIntl
For Technimark LLC , utilizing the right tools to understand testing, requirements, and success are key to establishing best business practices. Learn more in the latest "Business Case" from the new issue of STANDARDIZATION NEWS. go.astm.org/3XhlHi4
-
ASTM International
@ASTMIntl
How should you determine whether your model is useful and appropriate? Check out the latest "Data Points" article from the new issue of STANDARDIZATION NEWS. www.astm.org/news/determining-useful-models
-
ASTM International
@ASTMIntl
Check out news of ASTM's ongoing efforts to support students, professors, and early-career professionals. go.astm.org/4othNP7
-
ASTM International
@ASTMIntl
Check out this interview with Lisa Trofe, executive director of the #baby #safety Alliance and chair of the subcommittee on #infant bedding (F15.19) as she discusses the work of The Baby Safety Alliance, and the importance of standards. See www.astm.org/news/how-standards-help-make-safer-baby-prod…
-
ASTM International
@ASTMIntl
#workforce development trainings offer learners the opportunity to gain knowledge and get hands-on experience with the standards that shape their field. Learn more... go.astm.org/3JsI2Gj
-
ASTM International
@ASTMIntl
As awareness of new technical advances like #ai and #cryptocurrency continues to grow, one aspect of that growth is often overlooked: the enormous amount of #electricity required to run massive #datacenters. Standards for #electrical conductors will help utilities meet the demand... go.astm.org/48VHJy1
-
ASTM International
@ASTMIntl
Organized by ASTM's metallic and inorganic coatings committee (B08), the 2026 Workshop on Perfluoroalkyl and Polyfluoroalkyl (PFAS), Percentages of Hexavalent Chrome in (Trivalent Chrome), and Cadmium Plating Properties will be held May 6, 2026 in Dallas, Texas, USA. More info...
-
ASTM International
@ASTMIntl
Join us at the 6th Annual ASTM Autonomy in Aviation Symposium, November 12–13, in Santa Clara, CA. Will include a keynote address by Jonathan Lovegren, head of autonomy & airspace integration @WiskAero View the program and register... go.astm.org/49A3R19
-
ASTM International
@ASTMIntl
Join us December 7-11 in Houston, Texas for ASTM's D02 2025 Committee Week. Meetings of D02 Petroleum Products, Liquid Fuels, and Lubricants; D19 Water: E64 Stormwater Control Measures; and more! go.astm.org/3JztcOf
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Scores of reports indicate the positive impact of play — particularly risky play — for a #child’s physical and cognitive development. But #parents and other parties have voiced concerns about #playgrounds and the likelihood of injury from them. Standards are the answer. More info... go.astm.org/4qGy30J
-
ASTM International
@ASTMIntl
ASTM International general #aviation #aircraft committee (F44) has approved a new standard that will provide a means of compliance for certification of inflatable restraints, popularly known as #airbags. go.astm.org/42JJ0Ey
-
ASTM International
@ASTMIntl
Perhaps you have watched popular television shows that feature #firstresponders, but have you ever thought about how important standards are for #police officers, #firefighters, #emts and others who save lives? ASTM standards play a critical role in keeping first responders safe.
-
ASTM International
@ASTMIntl
Join us for live training on Nov 18 in New Orleans for "#diesel #fuels: Specifications and Test Methods." Participants will gain understanding of interconnection of diesel #fuel with other fuels and impacts of quality requirements on refinery production and product availability.
-
ASTM International
@ASTMIntl
Join us tomorrow at SWITCH, Asia’s leading startup festival connecting the Global-Asia innovation ecosystem, October 29-31. Expect a packed program featuring a variety of renowned speakers, including ASTM's own Aaron Prather on Oct 30. Learn more... go.astm.org/3JgiD2t
-
ASTM International
@ASTMIntl
#lawenforcement officials use #ballistic #shields for crowd control. ASTM standards for #ballisticshields save lives. Watch this video to learn more, and listen the latest episode of Standards Impact: "Standards for #firstresponders." See... go.astm.org/48K4wgb
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Join us at the 6th Annual ASTM Autonomy in #aviation Symposium, Nov 12–13, in Santa Clara, CA. Panel discussion "Routine Civil #airspace Integration for Increasingly Autonomous Flight" on Nov 13 moderated by Andrew Lacher of Flight Safety Foundation @flightsafety Learn more...
-
ASTM International
@ASTMIntl
Are you a #student working with #standards that would like a $500 project #grant? Hurry: the deadline for applications for and ASTM student grant is Oct 31st. Look for download button on go.astm.org/3KQn5W1
-
ASTM International
@ASTMIntl
ONLY A FEW WEEKS REMAIN!!! Join us November 9-14 in Atlanta, Georgia for ASTM's November 2025 Committee Week. Meetings of: E28 Mechanical Testing; E55 Manufacture of Pharmaceutical and Biopharmaceutical Products; E56 Nanotechnology; F04 Medical and Surgical Materials and Devices; and more! go.astm.org/467vOuY
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Join us at the 6th Annual ASTM Autonomy in Aviation Symposium, Nov 12–13, Santa Clara, CA. Brought to you by ASTM’s autonomy design and operations in aviation administrative committee (AC377). Keynote by Sean Felker of @shieldaitech Register today! na.eventscloud.com/6thautonomy
-
ASTM International
@ASTMIntl
Did you know ASTM Compass® offers a wide range of industry content, now including #uk Ministry of Defence #standards? @UKMoD_DefenceRT Check out this video. Also see go.astm.org/4gKIqfo
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Whether at the scene of a #crime or a natural disaster, #firstresponders are on the front line, protecting and serving. But who protects those who protect us? Standards provide help when disaster strikes. Listen to our latest Standards Impact podcast to learn more.
-
ASTM International
@ASTMIntl
Don’t miss keynote speaker Robert Rose of Reliable Robotics Corporation
@reliable_robot, present the keynote address, “Building a Company on a Vision to Operationalize Autonomy,” at the 6th Annual ASTM Autonomy in #aviation Symposium, November 12th –13th in Santa Clara, CA. -
ASTM International
@ASTMIntl
Our board of directors has assembled in Denver this week to discuss the business of ASTM International and take part in outreach visits with customers, partners, and others in business and industry. Learn more about the board... go.astm.org/3L2C9jm
-
ASTM International
@ASTMIntl
Partner with ASTM International: the leaders in standards development for over 125 years. Watch ASTM Director of Global Sales John Gallagher discuss enterprise licensing. Learn more... go.astm.org/3Jn3hcr
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Find out how standards from ASTM committees on unmanned #aircraft systems and #exoskeletons and exosuits support #military preparedness. go.astm.org/4mdrm2V
-
ASTM International
@ASTMIntl
ASTM's standard guide for #property #resilience assessments didn’t just help New York Disaster Interfaith Services @NYDISnet design a better inspection. It also created an accessible, common language that #auditors, trainers, and community partners could rely on. More information: go.astm.org/4nmYk1M
-
ASTM International
@ASTMIntl
ASTM has approved a new standard that will fill a gap in the waste #plastic process oil (#wppo) industry, specifically, how to analyze products resulting from processed mixed waste #plastics feeds. WPPO has the potential to be reused for multiple fuel needs and other #recyclables. www.astm.org/news/new-waste-plastic-process-oils-standard
-
ASTM International
@ASTMIntl
ASTM International’s recovered carbon black (#rcb) committee (D36) is developing a proposed standard that will help enable a manufacturer to significantly improve their production process monitoring abilities and improve productivity. go.astm.org/46YndvD
-
ASTM International
@ASTMIntl
Are you a #student working with #standards that would like a $500 project #grant? Hurry: the deadline for applications for and ASTM student grant is Oct 31st. Look for download button on go.astm.org/3KQn5W1
-
ASTM International
@ASTMIntl
We spoke with Brian Shiels — chair of the committee on personal protective clothing and equipment (F23) and vice chair of ASTM’s Board of Directors — about standards for #safety at #work. go.astm.org/4m2qP3I
-
ASTM International
@ASTMIntl
Discover the dynamic workflow tools of our industry-leading platform, ASTM Compass.® Join us for a free webinar, "The Essential Tools Every ASTM Compass User Needs," on October 20 at 9:30am ET. go.astm.org/4ooOsF7
-
ASTM International
@ASTMIntl
ASTM International general #aviation #aircraft committee (F44) has approved a new standard that will provide a means of compliance for certification of inflatable restraints, popularly known as #airbags. go.astm.org/42JJ0Ey
-
ASTM International
@ASTMIntl
We take pride in fostering relationships with standards development organizations worldwide. "Advancing Standards, Transforming Markets" is our brand promise. On this #worldstandardsday, we rededicate ourselves to that promise, and to our mission: "helping the world work better." #wsd2025
-
ASTM International
@ASTMIntl
ASTM's #electric insulating liquids and gases committee (D27) has announced a new subcommittee on insulating liquids for immersion cooling. The main purpose of dielectric liquids are to prevent #electrical discharges and act as heat transfer liquids to cool down systems.
-
ASTM International
@ASTMIntl
In order to develop a strategic approach to dealing with the many different types of environmental odors, new standards are being developed. #airquality #cleanair go.astm.org/4hbTnXC
-
ASTM International
@ASTMIntl
Are you a new member of ASTM? Dive into our "New Member Orientation" — a free, interactive eLearning experience designed to help you hit the ground running. #astmelearning Check it out! go.astm.org/4h5CVYO
-
ASTM International
@ASTMIntl
Developed by ASTM's #wastemanagement subcommittee on treatment, recovery, and reuse (D34.03), two new standards outline test methods for determining the effective breakdown of certified compostable products in real-world #composting facilities. go.astm.org/45LjMHJ
-
ASTM International
@ASTMIntl
Join us on October 16 at 3pm UAE time (7pm GMT) for the fourth session in our dynamic webinar series on fire safety codes and standards. Learn more at this no-cost, virtual session. Visit go.astm.org/42xcx4i
-
ASTM International
@ASTMIntl
ASTM has approved a new standard that will fill a gap in the waste #plastic process oil (#wppo) industry, specifically, how to analyze products resulting from processed mixed waste #plastics feeds. WPPO has the potential to be reused for multiple fuel needs and other #recyclables. www.astm.org/news/new-waste-plastic-process-oils-standard
-
ASTM International
@ASTMIntl
ASTM will hold a virtual panel discussion on Oct 14 at 1pm EDT to examine how resilience is defined across disciplines, clarify meaning and measurement of #netzero, and show how ASTM standards can provide clear definitions, reliable metrics, and alignment with global frameworks.
-
ASTM International
@ASTMIntl
A proposed standard — being developed by ASTM International’s #airquality committee — would be used to help assess environmental #odors. It will present a general strategy for an analytic, odorant-prioritization-based approach to environmental odor assessment.
-
ASTM International
@ASTMIntl
Meet ASTM Lab Services Team at the Gulf Coast Conference, Inc from 10/13-16 in Galveston, Texas! Visit ASTM at Booth 1220 to learn about our ISO17034 accreditation for Certified Reference Materials, how ASTM Insight SQC software can help you manage your labs’s QC program, more!
-
ASTM International
@ASTMIntl
Find out how standards from ASTM committees on unmanned #aircraft systems and #exoskeletons and exosuits support #military preparedness. go.astm.org/4mdrm2V
-
ASTM International
@ASTMIntl
As a direct customer of ASTM International, you'll have flexible format options, innovative, collaborative tools and multimedia, and access to subject matter experts. ASTM Compass® is your all-in-one platform for standards management. go.astm.org/compass
-
ASTM International
@ASTMIntl
ASTM will hold a virtual panel discussion on Oct 14 at 1pm EDT to examine how resilience is defined across disciplines, clarify meaning and measurement of #netzero, and show how ASTM standards can provide clear definitions, reliable metrics, and alignment with global frameworks.
-
ASTM International
@ASTMIntl
ASTM's certified reference materials are now accredited according to ISO 17034, demonstrating technical competency for high-quality, precise, and accurate reference materials necessary for instrument and method calibration, verification, validation, and establishing traceability of results. go.astm.org/46vua6P
-
ASTM International
@ASTMIntl
Join us December 7-11 in Atlanta, Georgia for ASTM's December 2025 Committee Week! Meetings of: C01 Cement; C09 Concrete and Concrete and Concrete Aggregates; E17 Vehicle - Pavement Systems; F48 Exoskeletons and Exosuits; and many more! go.astm.org/3IMJnY5
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Intl. Association of #oil & #gas Producers (#iogp) publications are now on #astm Compass®! @IOGP_News. Watch our video here: go.astm.org/IOGP-now-on-Compass
-
ASTM International
@ASTMIntl
ASTM Compass® offers 300+ expertly produced videos to help quickly onboard new staff, reinforce test methods, or retrain existing teams. If you’re streamlining training or managing #standards work for your organization, these videos are a game-changer. go.astm.org/4gKIqfo
-
ASTM International
@ASTMIntl
We spoke with Brian Shiels — chair of the committee on personal protective clothing and equipment (F23) and vice chair of ASTM’s Board of Directors — about standards for #safety at #work. go.astm.org/4m2qP3I
-
ASTM International
@ASTMIntl
ASTM's standard guide for #property #resilience assessments didn’t just help New York Disaster Interfaith Services @NYDISnet design a better inspection. It also created an accessible, common language that #auditors, trainers, and community partners could rely on. More information: go.astm.org/4nmYk1M
-
ASTM International
@ASTMIntl
The "Workshop on Low-Carbon Concrete: Industry Trends and their Impact on ASTM Cement and Concrete Standards" will be held Dec 7th. Organized by the cement and concrete and concrete aggregates committees, it will be held in Atlanta. go.astm.org/3XUK3Pl
-
ASTM International
@ASTMIntl
A proposed standard from ASTM’s #stormwater control measures committee (E64) will describe hydraulic testing of filter elements. It includes hydraulic testing, performance testing, loading capacities, and scour testing of entire #filtration systems. go.astm.org/4fHlb5v
-
ASTM International
@ASTMIntl
Developed by ASTM's #wastemanagement subcommittee on treatment, recovery, and reuse (D34.03), two new standards outline test methods for determining the effective breakdown of certified compostable products in real-world #composting facilities. go.astm.org/45LjMHJ
-
ASTM International
@ASTMIntl
Parr Instrument Company reactors and pressure vessels include both standard designs and custom-built equipment in laboratory and pilot plant sizes. ASTM standards are used regularly at Parr in order to assess material properties prior to manufacturing. go.astm.org/4niZ1Jf
-
ASTM International
@ASTMIntl
ASTM has announced the launch of the #petroleum Inspector Training Program (PITP), an eLearning certificate program available through the API @APIenergy and ASTM Learning Centers. go.astm.org/3KjCcXR
-
ASTM International
@ASTMIntl
ASTM International’s building seals and #sealants committee (C24) is developing a proposed standard that will help provide details to users and manufacturers on how sealant products perform as installed. go.astm.org/46zAV6d
-
ASTM International
@ASTMIntl
Join us September 30 at 1:30pm EDT to learn about how the industry-leading standards platform ASTM Compass® is streamlining workflows and making compliance easier for #textiles professionals. Register today for this no-cost webinar... go.astm.org/42M8T6m
-
ASTM International
@ASTMIntl
Today in Dubai, General Manager Tarek Demas of Society of Engineers-UAE (right) presented a gift to ASTM International President Andy Kireta after hosting the ASTM International UAE Chapter meeting — marking our renewed commitment to future collaboration. @ASTMpres @SOEUAE
-
ASTM International
@ASTMIntl
A proposed standard — being developed by ASTM International’s #airquality committee — would be used to help assess environmental #odors. It will present a general strategy for an analytic, odorant-prioritization-based approach to environmental odor assessment.
-
ASTM International
@ASTMIntl
Find out how standards from ASTM committees on unmanned #aircraft systems and #exoskeletons and exosuits support #military preparedness. go.astm.org/4mdrm2V
-
ASTM International
@ASTMIntl
Join ASTM in Houston, TX on December 4-5, for a two-day renewable #fuels training course. This in-person program introduces first- and second-generation fuels, #hydrogen, e-fuels, and their role in reducing carbon #emissions. go.astm.org/3JY9LOP
-
ASTM International
@ASTMIntl
ASTM International’s committee on #waste management (D34) recently introduced two new composting standards. Each outlines test methods for determining the effective breakdown of certified #compostable products in real-world #composting facilities. go.astm.org/45LjMHJ
-
ASTM International
@ASTMIntl
ASTM International’s recovered carbon black (#rcb) committee (D36) is developing a proposed standard that will help enable a manufacturer to significantly improve their production process monitoring abilities and improve productivity. go.astm.org/46YndvD
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will create a process for testing #metal hardness using shear pins. go.astm.org/40LtfMj
-
ASTM International
@ASTMIntl
Join us November 9-14 in Atlanta, Georgia for ASTM's November 2025 #committeeweek. Meetings of: D20 #plastics; E08 Fatigue and Fracture; F16 #fasteners; F17 Plastic #piping Systems; and more! go.astm.org/467vOuY
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
A proposed standard from ASTM’s #stormwater control measures committee (E64) will describe hydraulic testing of filter elements. It includes hydraulic testing, performance testing, loading capacities, and scour testing of entire #filtration systems. go.astm.org/4fHlb5v
-
ASTM International
@ASTMIntl
Developed by ASTM's #wastemanagement subcommittee on treatment, recovery, and reuse (D34.03), two new standards outline test methods for determining the effective breakdown of certified compostable products in real-world #composting facilities. go.astm.org/45LjMHJ
-
ASTM International
@ASTMIntl
Student project grant applications are due October 31st. 2025 WISE summer interns present final reports on Capitol Hill. And more! Check out this month's NextGen section of STANDARDIZATION NEWS. go.astm.org/3HQAix4
-
ASTM International
@ASTMIntl
ASTM #additivemanufacturing technologies committee (F42) is developing a standard that will offer guidance on selecting suitable techniques for detecting, quantifying, and classifying contamination that may be present within powder feedstock used in additive manufacturing (AM).
-
ASTM International
@ASTMIntl
Join us at #arablab Live, Sep 23-25 at Dubai World Trade Center. Connects a wide range of global industries, setting the standard for lab excellence in the Middle East and beyond. Don't miss @ASTMpres Andy Kireta's presentation! @ArabLab go.astm.org/3HGYTEu
-
ASTM International
@ASTMIntl
Find out how standards from ASTM committees on unmanned #aircraft systems and #exoskeletons and exosuits support #military preparedness. go.astm.org/4mdrm2V
-
ASTM International
@ASTMIntl
Benjamin Beiter, mechanical engineer with @NIST and committee on #exoskeletons and exosuits member discusses a standard being developed on task performance and environmental considerations for #firefighters using exoskeletons to enhance strength, improve endurance, and more.
-
ASTM International
@ASTMIntl
ASTM's #additivemanufacturing technologies committee (F42) has approved a new standard that aims to assist all who use AM in a business-case capacity, whether it be a manufacturer, a consumer, or an agency. go.astm.org/3JYtDBB
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will provide a consistent approach to #glass analysis among #forensic practitioners. go.astm.org/4pf3QoV
-
ASTM International
@ASTMIntl
A proposed ASTM standard — being developed by the sediment control subcommittee (D18.25.08), part of ASTM’s #soil and #rock committee (D18) — would serve as a large-scale performance test for #sediment control products of all kinds. go.astm.org/4lodhPs
-
ASTM International
@ASTMIntl
Season two of The #followingseas podcast begins with guest host Aaron Prather talking with Barbara Bell, Ed.D., CAPT US Navy (ret) @captbarbarabell about lessons learned both in the cockpit and classroom. Listen wherever you get your podcasts, or visit go.astm.org/following-seas-flight-lessons-in-leadership
-
ASTM International
@ASTMIntl
The Advancing Standardization for Critical and Emerging Technologies (#ascet) Center of Excellence has released its inaugural workshop report, a landmark step in charting the U.S. pathway to global leadership in #standardization. Get your copy today! go.astm.org/460Nt7W
-
ASTM International
@ASTMIntl
ASTM International’s committee on #waste management (D34) recently introduced two new composting standards. Each outlines test methods for determining the effective breakdown of certified #compostable products in real-world #composting facilities. go.astm.org/45LjMHJ
-
ASTM International
@ASTMIntl
Parr Instrument Company reactors and pressure vessels include both standard designs and custom-built equipment in laboratory and pilot plant sizes. ASTM standards are used regularly at Parr in order to assess material properties prior to manufacturing. go.astm.org/4niZ1Jf
-
ASTM International
@ASTMIntl
Student project grant applications are due October 31st. 2025 WISE summer interns present final reports on Capitol Hill. And more! Check out this month's NextGen section of STANDARDIZATION NEWS. go.astm.org/3HQAix4
-
ASTM International
@ASTMIntl
ASTM International membership pays off for both employees and employers — empowering professionals while strengthening the organizations they represent. That’s why the most strategic employers encourage their teams to join. go.astm.org/3JO9yxG
-
ASTM International
@ASTMIntl
ASTM's subcommittee on seized #drugs currently has five published standards. Among them is the standard practice for identification of seized drugs (E2329). Learn more about the committee and how their work is helping in the fight against illegal #opioids. go.astm.org/4niGn4o
-
ASTM International
@ASTMIntl
Developed by ASTM's #wastemanagement subcommittee on treatment, recovery, and reuse (D34.03), two new standards outline test methods for determining the effective breakdown of certified compostable products in real-world #composting facilities. go.astm.org/45LjMHJ
-
ASTM International
@ASTMIntl
ASTM welcomes forward-looking standards provisions of the Aug 21 U.S.-EU Joint Statement on a Framework Agreement for Reciprocal, Fair and Balanced Trade. We agree with both governments that cooperation on standards plays a crucial role in enhancing the transatlantic marketplace. go.astm.org/US-EU-joint-statement
-
ASTM International
@ASTMIntl
Read about all the candidates running for chair, vice chair, and director of ASTM International's Board of Directors. Members will soon receive an email with a link to the online ballot. go.astm.org/3I2iWgC
-
ASTM International
@ASTMIntl
Introducing students to ASTM standards can create a nexus of opportunity, engagement, and robust #standards development. On the latest episode of Standards Impact, join guest host Donovan Swift as he speaks with Joe Sinicrope, faculty advisor for the ASTM @FIU student chapter.
-
ASTM International
@ASTMIntl
Benjamin Beiter, mechanical engineer with @NIST and committee on #exoskeletons and exosuits member discusses a standard being developed on task performance and environmental considerations for #firefighters using exoskeletons to enhance strength, improve endurance, and more.
-
ASTM International
@ASTMIntl
Join us at #arablab Live, Sep 23-25 at Dubai World Trade Center. Connects a wide range of global industries, setting the standard for lab excellence in the Middle East and beyond. Don't miss ASTM's Tye Lawson- Beard's presentation! @ArabLab go.astm.org/3HGYTEu
-
ASTM International
@ASTMIntl
ASTM’s hazardous substances and #oilspill response committee is developing a standard that will provide a procedure to measure the rate of evaporation of #oil over time and with temperature. Learn more... go.astm.org/4lNGcgK
-
ASTM International
@ASTMIntl
ASTM #additivemanufacturing technologies committee (F42) is developing a standard that will offer guidance on selecting suitable techniques for detecting, quantifying, and classifying contamination that may be present within powder feedstock used in additive manufacturing (AM).
-
ASTM International
@ASTMIntl
Join us October 5-10 in Atlanta, Georgia for ASTM's October 2025 Committee Week. Meetings of: B05 Copper and Copper Alloys; D07 Wood; D10 Packaging; D22 Air Quality; E18 Sensory Evaluation; and more! go.astm.org/46uW6rU
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
A proposed ASTM standard — being developed by the sediment control subcommittee (D18.25.08), part of ASTM’s #soil and #rock committee (D18) — would serve as a large-scale performance test for #sediment control products of all kinds. go.astm.org/4lodhPs
-
ASTM International
@ASTMIntl
ASTM’s #petroleum products, liquid fuels, and #lubricants committee (D02) is developing a proposed standard that will be used to evaluate the anti-scoring properties of a #gear #lubricant when subjected to high-speed and shock loading conditions. go.astm.org/4o5gXIO
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will create a process for testing #metal hardness using shear pins. go.astm.org/40LtfMj
-
ASTM International
@ASTMIntl
A proposed standard from ASTM’s #stormwater control measures committee (E64) will describe hydraulic testing of filter elements. It includes hydraulic testing, performance testing, loading capacities, and scour testing of entire #filtration systems. go.astm.org/4fHlb5v
-
ASTM International
@ASTMIntl
The Workshop on Assessing Characteristics of Cleaning Agents Intended to Clean #medical Devices will be held November 11th in Atlanta, GA, in conjunction with meetings of Committee F04 on Medical and #surgical Materials and Devices. go.astm.org/3Fzsazr
-
ASTM International
@ASTMIntl
The COVID-19 virus shined a light on supply chain issues but there is more to it than that. On the latest episode of Standards Impact, learn how standards are supporting the supply chain. go.astm.org/supply-chain-podcast-standardization-news
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will be adapted for the advanced flash point test of liquid wastes with a continuously closed cup system without open flame during the test and a minimum sample requirement of 2mL. #water #wastewater
-
ASTM International
@ASTMIntl
ASTM has approved a new standard — developed by ASTM's #arthroplasty subcommittee, part of ASTM’s medical and surgical materials and devices committee (F04) — that will help ensure hip joint replacements by simulating harsh conditions in a laboratory setting. #hipreplacement
-
ASTM International
@ASTMIntl
Join us November 9-14 in Atlanta, Georgia for ASTM's November 2025 Committee Week. Meetings of: B02 Nonferrous Metals and Alloys; Gypsum and Related Building Materials and Systems; D20 Plastics; E08 Fatigue and Fracture; Playground Equipment for Public Use; and many more!
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
A proposed ASTM standard — being developed by the #calorimetry and mass loss subcommittee (E37.01) — aims to establish consistent specifications for accelerating rate #calorimeters (ARCs), critical tools for measuring #thermal runaway hazards in materials, #batteries, #chemicals.
-
ASTM International
@ASTMIntl
A proposed ASTM standard — being developed by the sediment control subcommittee (D18.25.08), part of ASTM’s #soil and #rock committee (D18) — would serve as a large-scale performance test for #sediment control products of all kinds. go.astm.org/4lodhPs
-
ASTM International
@ASTMIntl
Visitor registration for the 2nd Edition of BOLAT 2025 is now OPEN! ASTM is proud to be an association member, and our booth number is B332. Experience the region’s premier trade show for base oils, lubricants, and additives technology sectors. Sept 15–17, Dubai, UAE.
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) has approved a new standard that will be used to secure regulatory oversight for moving sites to closure (#mstc) at #petroleum underground storage tank (#ust) sites requiring corrective actions. go.astm.org/4ednso6
-
ASTM International
@ASTMIntl
ASTM’s performance of #buildings committee (E06) is developing a proposed standardized set of inspection procedures for the inspection of #fireprotection materials applied to structural building elements (columns, beams, floors, etc.). go.astm.org/45b2wLy
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will measure the ultrashort per- and polyfluoroalkyl substances (#pfas) that are not being measured currently. go.astm.org/4m9JfQU
-
ASTM International
@ASTMIntl
ASTM approved two new standards to outline how to test the breakdown of certified #compostable products as intended in real-world #composting facilities, including a defined range of operating conditions based on best management practices. go.astm.org/3HuKxqn
-
ASTM International
@ASTMIntl
A proposed ASTM standard — being developed by the sediment control subcommittee (D18.25.08), part of ASTM’s #soil and #rock committee (D18) — would serve as a large-scale performance test for #sediment control products of all kinds. go.astm.org/4lodhPs
-
ASTM International
@ASTMIntl
ASTM International has approved a new standard for characterizing ribonucleic acids (#rna) in lipid #nanoparticle (LNP) formulations that is a significant advancement for the field of RNA therapeutics and drug delivery. go.astm.org/4mRCIuf
-
ASTM International
@ASTMIntl
ASTM's stainless and alloy #steel tubular products subcommitte is developing a proposed standard that will provide a means to specify tubes for applications that require known strength as well as #corrosion resistance. go.astm.org/3Hvvxsp
-
ASTM International
@ASTMIntl
The 23rd International ASTM/ESIS Symposium on #fatigueandfracture Mechanics (44th National Symposium on Fatigue and Fracture Mechanics) will be held November 12-13 in Atlanta, GA. #fractography See go.astm.org/3X2DOt0
-
ASTM International
@ASTMIntl
A proposed standard from ASTM’s #stormwater control measures committee (E64) will describe hydraulic testing of filter elements. It includes hydraulic testing, performance testing, loading capacities, and scour testing of entire #filtration systems. go.astm.org/4fHlb5v
-
ASTM International
@ASTMIntl
#covid19 virus shined a light on #supplychain issues but there is more to it than that. On the latest episode of Standards Impact, learn how standards are supporting the supply chain. go.astm.org/supply-chain-podcast-standardization-news
-
ASTM International
@ASTMIntl
ASTM International has approved a new standard that will help communities develop an understanding of the vocabulary used to plan for adaptation to changing #climate. go.astm.org/4lqPkXR
-
ASTM International
@ASTMIntl
ASTM International’s recovered carbon black (#rcb) committee (D36) is developing a proposed standard that will help enable a manufacturer to significantly improve their production process monitoring abilities and improve productivity. go.astm.org/46YndvD
-
ASTM International
@ASTMIntl
ASTM #additivemanufacturing technologies committee (F42) is developing a standard that will offer guidance on selecting suitable techniques for detecting, quantifying, and classifying contamination that may be present within powder feedstock used in additive manufacturing (AM).
-
ASTM International
@ASTMIntl
ASTM International has approved a new test method to evaluate laminated #glass with various interlayers when #sealants are in intimate and intentional contact with #laminate edges. go.astm.org/4oBTlLP
-
ASTM International
@ASTMIntl
Ever wonder how stuff gets to your door? On the latest episode of Standards Impact, learn about the complexities of the supply chain, from #tariffs to #sustainability practices, to logistics, and what the #supplychain of the future might look like. go.astm.org/supply-chain-podcast
-
ASTM International
@ASTMIntl
ASTM's #consumerproducts committee (F15) invites interested parties to join in the development of a proposed safety and performance specification for #soccer #goals weighing 40 pounds or less. go.astm.org/44X2INj
-
ASTM International
@ASTMIntl
ASTM has approved a new standard — developed by ASTM's #arthroplasty subcommittee, part of ASTM’s medical and surgical materials and devices committee (F04) — that will help ensure hip joint replacements by simulating harsh conditions in a laboratory setting. #hipreplacement
-
ASTM International
@ASTMIntl
A proposed ASTM standard — being developed by the sediment control subcommittee (D18.25.08), part of ASTM’s #soil and #rock committee (D18) — would serve as a large-scale performance test for #sediment control products of all kinds. go.astm.org/4lodhPs
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that describes a rapid diagnostic #fuel quality test procedure that measures the levels of microbial contamination in fuel or fuel-associated #water samples. go.astm.org/45svBRI
-
ASTM International
@ASTMIntl
ASTM approved two new standards to outline how to test the breakdown of certified #compostable products as intended in real-world #composting facilities, including a defined range of operating conditions based on best management practices. go.astm.org/3HuKxqn
-
ASTM International
@ASTMIntl
ASTM’s hazardous substances and #oilspill response committee is developing a standard that will provide a procedure to measure the rate of evaporation of #oil over time and with temperature. Learn more... go.astm.org/4lNGcgK
-
ASTM International
@ASTMIntl
ASTM's stainless and alloy #steel tubular products subcommitte is developing a proposed standard that will provide a means to specify tubes for applications that require known strength as well as #corrosion resistance. go.astm.org/3Hvvxsp
-
ASTM International
@ASTMIntl
ASTM's environmental assessment, risk management and corrective action committee (E50) invites any interested party to join in the development of a proposed standard for describing #coal combustion products (CCP) in field investigations for beneficial use. go.astm.org/46gZypO
-
ASTM International
@ASTMIntl
ASTM International has approved a new standard that will help ensure #hip #joint replacements by simulating harsh conditions in a laboratory setting. It will enable direct comparison of metal-on-polyethylene #hipreplacements under standardized third-body particle wear conditions
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will measure the ultrashort per- and polyfluoroalkyl substances (#pfas) that are not being measured currently. go.astm.org/4m9JfQU
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will be adapted for the advanced flash point test of liquid wastes with a continuously closed cup system without open flame during the test and a minimum sample requirement of 2mL. #water #wastewater
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) has approved a new standard that will be used to secure regulatory oversight for moving sites to closure (#mstc) at #petroleum underground storage tank (#ust) sites requiring corrective actions. go.astm.org/4ednso6
-
ASTM International
@ASTMIntl
ASTM’s hazardous substances and #oilspill response committee is developing a standard that will provide a procedure to measure the rate of evaporation of #oil over time and with temperature. Learn more... go.astm.org/4lNGcgK
-
ASTM International
@ASTMIntl
A new ASTM standard will serve as a useful guide to help individuals understand the severity of #muscle #injuries. go.astm.org/4eq6ymz
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management, and corrective action committee (E50) has recently approved a new standard that will help with planning analysis and selecting a lab when data is being collected for a per- and polyfluoroalkyl substances (#pfas) sampling project.
-
ASTM International
@ASTMIntl
ASTM International has approved a new standard for characterizing ribonucleic acids (#rna) in lipid #nanoparticle (LNP) formulations that is a significant advancement for the field of RNA therapeutics and drug delivery. go.astm.org/4mRCIuf
-
ASTM International
@ASTMIntl
ASTM's #additivemanufacturing committee (F42) is developing a proposed standard that will help to define the printability range of cementitious materials for any given extrusion-based #3dprinter. go.astm.org/4nVH58N
-
ASTM International
@ASTMIntl
ASTM’s performance of #buildings committee (E06) is developing a proposed standardized set of inspection procedures for the inspection of #fireprotection materials applied to structural building elements (columns, beams, floors, etc.). go.astm.org/45b2wLy
-
ASTM International
@ASTMIntl
ASTM’s #petroleum products, liquid fuels, and #lubricants committee (D02) is developing a proposed standard that will be used to evaluate the anti-scoring properties of a #gear #lubricant when subjected to high-speed and shock loading conditions. go.astm.org/4o5gXIO
-
ASTM International
@ASTMIntl
How are process capability index (Cpk) and process performance index (Ppk) different, and why does it matter? Our "Data Points" columnist offers an explanation. go.astm.org/46KA1G0
-
ASTM International
@ASTMIntl
The 2025 Workshop on Transparent Enclosures and Materials will be held November 12, 2025. Organized by ASTM Committee F07 on #aerospace and #aircraft, it will be held in Atlanta, Georgia. go.astm.org/3Ucea2L
-
ASTM International
@ASTMIntl
ASTM’s water committee (D19) is developing a standard to analyze for #metals in #water samples, in solid samples that have been leached, or digested in reagents that put the elements into aqueous solution. It aims to focus on the analysis of water, #wastewater, and solid samples.
-
ASTM International
@ASTMIntl
A new standard being developed by ASTM’s forensic sciences committee (E30) aims to provide guidance for collection and preservation of trace evidence in lab settings. It offers best practices for forensic science practitioners (FSPs) to detect, collect, store trace evidence while minimizing contamination, loss, damage. go.astm.org/4onVQBu
-
ASTM International
@ASTMIntl
ASTM's manufacture of #pharmaceutical and #biopharmaceutical products committee (E55) is developing a proposed standard for single-use systems (SUS) used to manufacture #drugs. go.astm.org/44WhgMZ
-
ASTM International
@ASTMIntl
A proposed ASTM standard — being developed by the #calorimetry and mass loss subcommittee (E37.01) — aims to establish consistent specifications for accelerating rate #calorimeters (ARCs), critical tools for measuring #thermal runaway hazards in materials, #batteries, #chemicals.
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will create a process for testing metal hardness using shear pins. go.astm.org/40LtfMj
-
ASTM International
@ASTMIntl
ASTM International's conductors of #ferrous #metals subcommittee (B01.05), part of the #electrical #conductors committee (B01) is developing two proposed standards that will create options for higher capacity transmission line designs that meet real world challenges. #electricity
-
ASTM International
@ASTMIntl
ASTM's manufacture of #pharmaceutical and #biopharmaceutical products committee (E55) is developing a proposed standard for single-use systems (SUS) used to manufacture #drugs. go.astm.org/44WhgMZ
-
ASTM International
@ASTMIntl
Join us for October 2025 Committee Week in Atlanta, Georgia. Committee meetings of: B05 Copper and Copper Alloys; D22 Air Quality; E06 Performance of Buildings; E18 Sensory Evaluation: F37 Light Sport Aircraft; F45 Robotics, Automation, and Autonomous Systems; and many many more!
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM’s #petroleum products, liquid fuels, and #lubricants committee (D02) is developing a proposed standard that will be used to evaluate the anti-scoring properties of a #gear #lubricant when subjected to high-speed and shock loading conditions. go.astm.org/4o5gXIO
-
ASTM International
@ASTMIntl
ASTM is developing a standard that will test how well fiber-reinforced #concrete (FRC) and ultra-high-performance concrete (UHPC) hold together under stress. It will help determine whether an FRC or UHPC mixture meets the required quality for intended structural performance.
-
ASTM International
@ASTMIntl
ASTM International is developing a proposed standard that will be adapted for the advanced flash point test of liquid wastes with a continuously closed cup system without open flame during the test and a minimum sample requirement of 2mL. #water #wastewater
-
ASTM International
@ASTMIntl
The Workshop on #weathering and Durability Testing 2026 will be held virtually on March 11, 2026. To participate in the symposium, authors must submit a 300-word (max) abstract to Workshop Chairs Kady Gregersen and David Cocuzzi by December 1, 2025. go.astm.org/4l8kwep
-
ASTM International
@ASTMIntl
ASTM has approved a new standard — developed by ASTM's #arthroplasty subcommittee, part of ASTM’s #medical and #surgical materials and devices committee (F04) — that will help ensure #hip joint replacements by simulating harsh conditions in a laboratory setting. #hipreplacement
-
ASTM International
@ASTMIntl
ASTM’s water committee (D19) is developing a standard to analyze for #metals in #water samples, in solid samples that have been leached, or digested in reagents that put the elements into aqueous solution. It aims to focus on the analysis of water, #wastewater, and solid samples.
-
ASTM International
@ASTMIntl
Join us for the Workshop on Surface and Dermal Sampling Methods for Exposure Assessment and Monitoring. Sponsored by ASTM Committee D22 on Air Quality it will be held in Atlanta, Georgia, on Wednesday, October 8, 2025. go.astm.org/3HYwdDa
-
ASTM International
@ASTMIntl
ASTM's #consumerproducts committee (F15) invites interested parties to join in the development of a proposed safety and performance specification for #soccer #goals weighing 40 pounds or less. go.astm.org/44X2INj
-
ASTM International
@ASTMIntl
Attend an exclusive no-cost webinar on the ASTM Digital #library on Tuesday, July 29 at 10am EST. Whether you're a #librarian, #professor, or researcher, this session will showcase how the ASTM Digital Library can enrich your #curriculum, support advanced #research, and much more. go.astm.org/4lLXYRG
-
ASTM International
@ASTMIntl
44th Symposium on #pesticide Formulation and Delivery Systems: Navigating the Challenges of #sustainable Innovation will be held October 7-9. Organized by ASTM Committee E35 on P#esticides, #antimicrobials, and Alternative Control Agents, it will be held in Atlanta.
-
ASTM International
@ASTMIntl
ASTM's environmental assessment, risk management and corrective action committee (E50) invites any interested party to join in the development of a proposed standard for describing #coal combustion products (CCP) in field investigations for beneficial use. go.astm.org/46gZypO
-
ASTM International
@ASTMIntl
A proposed ASTM standard — being developed by the #calorimetry and mass loss subcommittee (E37.01) — aims to establish consistent specifications for accelerating rate #calorimeters (ARCs), critical tools for measuring #thermal runaway hazards in materials, #batteries, #chemicals.
-
ASTM International
@ASTMIntl
ASTM International has approved a new standard that will help ensure #hip #joint replacements by simulating harsh conditions in a laboratory setting. It will enable direct comparison of metal-on-polyethylene #hipreplacements under standardized third-body particle wear conditions
-
ASTM International
@ASTMIntl
ASTM continues to play a strategic role in shaping the future of emerging #airspace through global partnerships and the development of foundational standards for Advanced Air Mobility (#aam), Unmanned #aircraft Systems (#uas), and more. Get newly published report in PDF format...
-
ASTM International
@ASTMIntl
ASTM is developing a standard that will test how well fiber-reinforced #concrete (FRC) and ultra-high-performance concrete (UHPC) hold together under stress. It will help determine whether an FRC or UHPC mixture meets the required quality for intended structural performance.
-
ASTM International
@ASTMIntl
ASTM's #consumerproducts committee (F15) invites interested parties to join in the development of a proposed safety and performance specification for #soccer #goals weighing 40 pounds or less. go.astm.org/44X2INj
-
ASTM International
@ASTMIntl
ASTM's manufacture of #pharmaceutical and #biopharmaceutical products committee (E55) is developing a proposed standard for single-use systems (SUS) used to manufacture #drugs. go.astm.org/44WhgMZ
-
ASTM International
@ASTMIntl
ASTM’s #petroleum products, liquid fuels, and #lubricants committee (D02) is developing a proposed standard that will be used to evaluate the anti-scoring properties of a #gear #lubricant when subjected to high-speed and shock loading conditions. go.astm.org/4o5gXIO
-
ASTM International
@ASTMIntl
ASTM’s performance of #buildings committee (E06) is developing a proposed standardized set of inspection procedures for the inspection of #fireprotection materials applied to structural building elements (columns, beams, floors, etc.). go.astm.org/45b2wLy
-
ASTM International
@ASTMIntl
ASTM's #additivemanufacturing committee (F42) is developing a proposed standard that will help to define the printability range of cementitious materials for any given extrusion-based #3dprinter. go.astm.org/4nVH58N
-
ASTM International
@ASTMIntl
ASTM is hosting its 6th Annual Autonomy in #aviation Symposium, organized by ASTM’s autonomy design and operations in aviation administrative committee (AC377). The symposium — entitled “Operationalizing Autonomy: Novel to Normalized” — will be held Nov 12-13 in Santa Clara, CA.
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management, and corrective action committee (E50) has recently approved a new standard that will help with planning analysis and selecting a lab when data is being collected for a per- and polyfluoroalkyl substances (#pfas) sampling project.
-
ASTM International
@ASTMIntl
ASTM International's conductors of #ferrous #metals subcommittee (B01.05), part of the #electrical #conductors committee (B01) is developing two proposed standards that will create options for higher capacity transmission line designs that meet real world challenges. #electricity
-
ASTM International
@ASTMIntl
ASTM International's committee on hazardous substances and #oil spill response (F20) is dedicated to helping limit the damage of #oilspills — from the control and removal of oil from #oceans and #freshwater to the mitigation of harm done to #shoreline and #coastal #environments.
-
ASTM International
@ASTMIntl
ASTM International’s committee on #sustainability (E60) has contributed to an important societal shift since its formation in 2008. And three new standards will extend that impact. #productdesign #circulardesign go.astm.org/4kqJZ2j
-
ASTM International
@ASTMIntl
The Workshop on #hip #impingement Testing will be held May 5, 2026. Organized by ASTM Committee F04 on #medical and #surgical Materials and Devices, it will be held in Dallas, Texas. go.astm.org/4kLzJBX
-
ASTM International
@ASTMIntl
Surf’s up…standards ahead! Experts dive into the wipeouts and wins of #wavepool innovation on this recent episode of Standards Impact: "Making Waves for #watersports." www.astm.org/news/making-waves-standards-for-water-sports
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) has approved a new standard that will be used to secure regulatory oversight for moving sites to closure (#mstc) at #petroleum underground storage tank (#ust) sites requiring corrective actions. go.astm.org/4ednso6
-
ASTM International
@ASTMIntl
Major League #baseball will hold its "#homerun derby" tonight. Understand the science and standards behind hitting one "out of the park." Listen to Standards Impact. Wherever you get your podcasts, or visit go.astm.org/standards-impact-baseball
-
ASTM International
@ASTMIntl
A new ASTM standard will serve as a useful guide to help individuals understand the severity of #muscle #injuries. go.astm.org/4eq6ymz
-
ASTM International
@ASTMIntl
ASTM's environmental assessment, risk management and corrective action committee (E50) invites any interested party to join in the development of a proposed standard for describing #coal combustion products (CCP) in field investigations for beneficial use. go.astm.org/46gZypO
-
ASTM International
@ASTMIntl
ASTM’s hazardous substances and #oilspill response committee is developing a standard that will provide a procedure to measure the rate of evaporation of #oil over time and with temperature. Learn more... go.astm.org/4lNGcgK
-
ASTM International
@ASTMIntl
Two professional #astronauts — Christopher Ferguson @Astro_Ferg and Michael López-Alegría @CommanderMLA — discuss the current state of commercial #spaceflight and where the field is headed on the latest episode of Standards Impact. Listen wherever you get your #podcasts, or
-
ASTM International
@ASTMIntl
ASTM continues to play a strategic role in shaping the future of emerging #airspace through global partnerships and the development of foundational standards for Advanced Air Mobility (#aam), Unmanned #aircraft Systems (#uas), and more. Get newly published report in PDF format...
-
ASTM International
@ASTMIntl
Join us October 13-14 in Richmond, VA for "FZG #gear #lubricants Tests and Gear Rating" — a hands-on course presented by ASTM in collaboration with the FZG Institute. Led by Dr. Thomas Tobie, this training will enhance your understanding of lubricant testing and gear rating.
-
ASTM International
@ASTMIntl
ASTM's structural test methods subcommittee (D30.05) is developing a proposed standard that organizations can use to design, analyze, and certify composite structures in the #aerospace, #automotive, #marine, and #civilengineering fields. go.astm.org/44nVAdK
-
ASTM International
@ASTMIntl
Check out the digital edition of the July / August 2025 issue of STANDARDIZATION NEWS. Circular design. Coal and coke standards. Stopping the spread of oil spills. And much more! #standards #magazine Visit go.astm.org/SN-July-August-2025
-
ASTM International
@ASTMIntl
ASTM's environmental assessment, risk management and corrective action committee (E50) invites any interested party to join in the development of a proposed standard for describing #coal combustion products (CCP) in field investigations for beneficial use. www.astm.org/news/coal-combustion-products-standard-proposed
-
ASTM International
@ASTMIntl
ASTM International's committee on hazardous substances and #oil spill response (F20) is dedicated to helping limit the damage of #oilspills — from the control and removal of oil from #oceans and #freshwater to the mitigation of harm done to #shoreline and #coastal #environments.
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) has approved a new standard that will be used to secure regulatory oversight for moving sites to closure (#mstc) at #petroleum underground storage tank (#ust) sites requiring corrective actions. go.astm.org/4ednso6
-
ASTM International
@ASTMIntl
ASTM's committee on #sustainability (E60) has contributed to an important societal shift in understanding #environmental impact since its formation in 2008. Learn how 3 new standards focus on the product design process and its relationship to that product’s environmental impact.
-
ASTM International
@ASTMIntl
Find out how the committee on amusement rides and devices (F24) is addressing VR and AR for #rollercoasters, and how its many other published standards cover a wide range of aspects of the amusement park experience. go.astm.org/42O3wnO
-
ASTM International
@ASTMIntl
Stem cell research has faced limitations based on a lack of standardization. But a new standard is intended to provide a wide variety of industries that work with stem cells with a reliable test method. go.astm.org/4kfgNw6
-
ASTM International
@ASTMIntl
ASTM's #paint and related #coatings, materials, and applications committee has approved a new standard that will be useful for characterizing the #wettability of surfaces. It describes how to make such measurements by contact angle measurement using portable #goniometers.
-
ASTM International
@ASTMIntl
ASTM is proud to introduce the #pfas eLearning Program, your go-to training solution for understanding and applying PFAS analytical methods. Learn how to select the right analytical methods for identifying and quantifying PFAS in environmental media. go.astm.org/44sdxGZ
-
ASTM International
@ASTMIntl
As many people take to the #beach this upcoming #independenceday holiday in the USA, some may be thinking about the safety of #beachumbrellas. Enter ASTM's market #umbrellas subcommittee (F15.79), who are working to make #beaches safer. go.astm.org/40y8pzE
-
ASTM International
@ASTMIntl
ASTM’s #vacuumcleaners committee (F11) is developing a standard specification for battery-operated #cleaning appliances that will provide a test method for battery-powered surface cleaning appliances to help with #battery certification, testing, compliance, reliability, more. Go
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) has approved a new standard that will be used to secure regulatory oversight for moving sites to closure (#mstc) at #petroleum underground storage tank (#ust) sites requiring corrective actions. www.astm.org/news/underground-petroleum-tank-cleanup-cove…
-
ASTM International
@ASTMIntl
Find out how the committee on amusement rides and devices (F24) is addressing VR and AR for #rollercoasters, and how its many other published standards cover a wide range of aspects of the #amusementpark experience. go.astm.org/42O3wnO
-
ASTM International
@ASTMIntl
To help cannabis cultivators, processors, and others remain compliant with regulations and reduce risk of microbiological contamination of cannabis products, ASTM’s committee on cannabis has introduced a standard guide for techniques to lower microbial load of post-harvest inflorescence of cannabis and hemp. www.astm.org/news/cleaner-cannabis-standard-targets-conta…
-
ASTM International
@ASTMIntl
ASTM's environmental assessment, risk management and corrective action committee (E50) invites any interested party to join in the development of a proposed standard for describing #coal combustion products (CCP) in field investigations for beneficial use. go.astm.org/46gZypO
-
ASTM International
@ASTMIntl
The 10th Anniversary of the Emerging Professionals Program was celebrated in grand style at June Committee Week. Check out photos below, along with an entire gallery of over 50 pictures at go.astm.org/emerging-professionals-reception
-
ASTM International
@ASTMIntl
A new ASTM standard will serve as a useful guide to help individuals understand the severity of #muscle #injuries. go.astm.org/4eq6ymz
-
ASTM International
@ASTMIntl
ASTM is developing a proposed standard that will provide a consistent approach to #fiber analysis among #forensic practitioners and researchers. go.astm.org/3I0SCDl
-
ASTM International
@ASTMIntl
The ASTM Digital Library has officially launched on a new and improved platform! Enjoy a faster, smarter experience with improved navigation and easier access to the content you rely on, including ASTM #journals, #books (#manuals, #monographs, etc.), conference proceedings, more.
-
ASTM International
@ASTMIntl
Cooling off with #watersports during this #heatwave? On the latest episode of Standards Impact, learn how standards help us beat the #heat safely. Wherever you get your podcasts, or visit go.astm.org/water-sports
-
ASTM International
@ASTMIntl
Congratulations to ASTM Committee G03 on #weathering and Durability, celebrating their 60th Anniversary at D02 June Committee Week in Kansas City!
-
ASTM International
@ASTMIntl
To help #cannabis cultivators, processors, and others remain compliant with regulations and reduce risk of microbiological contamination of cannabis products, ASTM’s committee on cannabis has introduced a standard guide for techniques to lower microbial load of post-harvest inflorescence of cannabis and #hemp. go.astm.org/46a6JA4
-
ASTM International
@ASTMIntl
A proposed standard will provide general principles for generating test report summaries from standards for #medical and #surgical materials and devices. It will also recommend best practices regarding both the content and form of these summaries. go.astm.org/43STjFS
-
ASTM International
@ASTMIntl
ASTM’s Smart and Sustainable #manufacturing Systems journal is seeking new Editorial Board Members! Interested? Send your CV to the publishing manager via email to aconaway@astm.org. Learn more at go.astm.org/ssms
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management and corrective action committee (E50) has approved a new standard that will be used to secure regulatory oversight for moving sites to closure (#mstc) at #petroleum underground storage tank (#ust) sites requiring corrective actions. go.astm.org/4ednso6
-
ASTM International
@ASTMIntl
The Great Baltimore #fire of February 1904 burned over 1,500 buildings to the ground, and helped lead to the formation of the ASTM's committee on fireproofing materials. Learn about their standards for #firesafety. go.astm.org/3GE85IE
-
ASTM International
@ASTMIntl
ASTM’s #exoskeletons and #exosuits committee (F48) has proposed a new test method for evaluating exoskeleton device performance on #firstresponder tasks. go.astm.org/3GILScv
-
ASTM International
@ASTMIntl
Find out how the committee on amusement rides and devices (F24) is addressing VR and AR for #rollercoasters, and how its many other published standards cover a wide range of aspects of the #amusementpark experience. go.astm.org/42O3wnO
-
ASTM International
@ASTMIntl
ASTM’s #vacuumcleaners committee (F11) is developing a standard specification for battery-operated #cleaning appliances that will provide a test method for battery-powered surface cleaning appliances to help with #battery certification, testing, compliance, reliability, more. Go
-
ASTM International
@ASTMIntl
ASTM's #additivemanufacturing technologies committee is developing a standard to cover environment, health, and safety principles for use of #polymers with material extrusion (#mex). In MEX technology, material is extruded through a nozzle to build 3D objects one layer at a time.
-
ASTM International
@ASTMIntl
Stem cell research has faced limitations based on a lack of standardization. But a new standard is intended to provide a wide variety of industries that work with stem cells with a reliable test method. go.astm.org/4kfgNw6
-
ASTM International
@ASTMIntl
ASTM’s committee on #consumerproducts (F15) creates standards that help keep products safe. In this new STANDARDIZATION NEWS interview, three committee members who represent #consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
ASTM’s committee on #consumerproducts (F15) creates standards that help keep products safe. In this new STANDARDIZATION NEWS interview, three committee members who represent #consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
ASTM’s committee on #consumerproducts (F15) creates standards that help keep products safe. In this new STANDARDIZATION NEWS interview, three committee members who represent #consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
ASTM’s committee on #consumerproducts (F15) creates standards that help keep products safe. In this new STANDARDIZATION NEWS interview, three committee members who represent #consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
ASTM’s committee on #consumerproducts (F15) creates standards that help keep products safe. In this new STANDARDIZATION NEWS interview, three committee members who represent #consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
ASTM's #paint and related #coatings, materials, and applications committee has approved a new standard that will be useful for characterizing the #wettability of surfaces. It describes how to make such measurements by contact angle measurement using portable #goniometers.
-
ASTM International
@ASTMIntl
Join us for D02 June Committee Week in Kansas City, Missouri, June 22-26, 2025. Meetings of D02 Petroleum Products, Liquid Fuels, and Lubricants; D19 Water; D34 Waste Management; G03 Weathering and Durability; and more! go.astm.org/4dK712t
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
The ASTM #rook Conference on #asbestos Issues will be held August 4-8. The conference is organized by ASTM Committee D22 on #airquality, and will be held in Pittsburgh, PA. go.astm.org/3Mk01fJ
-
ASTM International
@ASTMIntl
A proposed standard will provide general principles for generating test report summaries from standards for #medical and #surgical materials and devices. go.astm.org/43STjFS
-
ASTM International
@ASTMIntl
As #wavepools continue to grow in popularity, you no longer have to live near the ocean to catch a wave. From #surfing to #wakeboarding to #waterskiing, learn how standards help make water sports and amusements safer. Listen to podcast... go.astm.org/SI-S3-E5
-
ASTM International
@ASTMIntl
ASTM's environmental assessment, risk management, and corrective action committee has approved the development of a proposed standard that will cover remedial investigations and remediation actions for Per- and Polyfluoroalkyls (#pfas). go.astm.org/4jrIX5N
-
ASTM International
@ASTMIntl
As #wavepools continue to grow in popularity, you no longer have to live near the ocean to catch a wave. Learn how standards support safety from two pioneers in #wavepool technology, plus a senior biomechanical engineer at Guidance #engineering. Wherever you get podcasts, or listen at go.astm.org/water-sports-on-standards-impact
-
ASTM International
@ASTMIntl
.@CamaraProcemco, a key partner in the #construction industry in #colombia, has referenced numerous ASTM standards in its work with Colombian standardization committees, such as @InviasOficial #cement Stabilization Review Committee and @ICONTEC Standardization Committees. More at
-
ASTM International
@ASTMIntl
ASTM's #buildings and #construction subcommittee is developing a proposed standard that will aid in measuring #energyefficiency and #emissions associated with and/or produced in the operational use of #residential buildings. www.astm.org/news/energy-efficiency-and-emissions-covered…
-
ASTM International
@ASTMIntl
The Symposium on #building Envelope Air Tightness: Design Strategies, Testing, and Impacts will be held March 22-23, 2026. Organized by ASTM Committee E06 on Performance of #buildings, it will be held in Dallas, Texas. go.astm.org/4knyr0u
-
ASTM International
@ASTMIntl
Join us for D02 June Committee Week in Kansas City, Missouri, June 22-26, 2025. Meetings of D02 Petroleum Products, Liquid Fuels, and Lubricants; D19 Water; D34 Waste Management; G03 Weathering and Durability; and more! go.astm.org/4dK712t
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM's ASTM #additivemanufacturing Center of Excellence @ASTMAMCOE has launched a new manufacturer certification program designed to enhance quality assurance, regulatory compliance, and process control across the additive manufacturing (AM) supply chain. go.astm.org/4mK4rgR
-
ASTM International
@ASTMIntl
We're less than two weeks away from June 16th — the 10th anniversary of ASTM's Emerging Professional Program. In this short video, watch 2024 ASTM Board Chair Bill Griese discuss graduates of the program and #leadership positions they have gone on to hold in numerous committees. Learn more at go.astm.org/43N9qqg
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
A new standard approved by ASTM’s #cannabis committee (D37) will aid in reducing the risk of microbiological contamination of cannabis products. go.astm.org/44LJPys
-
ASTM International
@ASTMIntl
It's @TheNFRC's #nationalroofingweek. Did you know that ASTM's roofing and waterproofing committee (D08) — meeting later in June at ASTM Committee Week — was formed in 1905, has over 500 members, and currently has jurisdiction over 180 standards? Learn more at
-
ASTM International
@ASTMIntl
ASTM's #environmental assessment, risk management, and corrective action committee has approved the development of a standard that will cover the identification, assessment and cleanup of #microparticles found in #soil, #sediment, surface #water and #groundwater.
-
ASTM International
@ASTMIntl
ASTM International’s autonomy design and operations in #aviation administrative committee (AC377) has published a new white paper entitled, “A Safety Intent-Based Application of Part 23 “Pilot” and “Flightcrew” Requirements for Uncrewed #aircraft.” go.astm.org/43Dz674
-
ASTM International
@ASTMIntl
ASTM’s #forensicsciences committee (E30) is developing a proposed standard that will help forensic analysts of seized #drugs evidence better evaluate which methodology to use when addressing detection/identification limitations within laboratories. go.astm.org/4jotbsk
-
ASTM International
@ASTMIntl
ASTM's #buildings and #construction subcommittee is developing a proposed standard that will aid in measuring #energyefficiency and #emissions associated with and/or produced in the operational use of #residential buildings. go.astm.org/4kK6Lmt
-
ASTM International
@ASTMIntl
Find out how the committee on amusement rides and devices (F24) is addressing VR and AR for #rollercoasters, and how its many other published standards cover a wide range of aspects of the #amusementpark experience. go.astm.org/42O3wnO
-
ASTM International
@ASTMIntl
ASTM's environmental assessment, risk management, and corrective action committee has approved the development of a proposed standard that will cover remedial investigations and remediation actions for Per- and Polyfluoroalkyls (#pfas). go.astm.org/4jrIX5N
-
ASTM International
@ASTMIntl
#stemcell research has faced limitations based on a lack of standardization. But a new standard is intended to provide a wide variety of industries that work with stem cells with a reliable test method. go.astm.org/4kfgNw6
-
ASTM International
@ASTMIntl
Building on a 20-year legacy as Qatar's premier platform for the construction industry, @ProjectQatarPQ returns May 26-29. STM is a Project Qatar media partner. Look for our stand at E05, Hall 2. There's still time... SECURE YOUR SPOT TODAY! go.astm.org/43otsFE
-
ASTM International
@ASTMIntl
Find out how the committee on amusement rides and devices (F24) is addressing VR and AR for #rollercoasters, and how its many other published standards cover a wide range of aspects of the #amusementpark experience. go.astm.org/42O3wnO
-
ASTM International
@ASTMIntl
ASTM’s committee on #consumerproducts (F15) creates standards that help keep products safe. In this new STANDARDIZATION NEWS interview, three committee members who represent #consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
A new standard approved by ASTM’s #cannabis committee (D37) will aid in reducing the risk of microbiological contamination of cannabis products. go.astm.org/44LJPys
-
ASTM International
@ASTMIntl
It's World #metrologyday! Observed annually on May 20th, it commemorates the signing of the Metre Convention in Paris — 150 years ago! — which set the framework for global collaboration in establishing the International System of Units. Where would standards be without metrology?
-
ASTM International
@ASTMIntl
Last week, ASTM staff volunteered their time at Riverbend Environmental Education Center in Gladwyne, PA. Riverbend's mission is to connect people to nature, equitably advancing environmental literacy for children and adults.
-
ASTM International
@ASTMIntl
ASTM International committees are helping to ensure that the #water we use every day is provided at a degree of purity and cleanliness appropriate to its end use, is transported efficiently, and is properly treated after it has been used. go.astm.org/4iUafl6
-
ASTM International
@ASTMIntl
HAPPENING TODAY! Committee F38 on Unmanned Aircraft Systems is holding a Detect and Avoid (DAA) Workshop in conjunction with @AUVSI. Part of @XPONENTIALshow. Today, Monday, May 19, from 12:30 PM - 2:30 PM CDT in Houston, TX. go.astm.org/43iUMoI
-
ASTM International
@ASTMIntl
ASTM's #additivemanufacturing technologies committee is developing a standard to cover environment, health, and safety principles for use of #polymers with material extrusion (#mex). In MEX technology, material is extruded through a nozzle to build 3D objects one layer at a time.
-
ASTM International
@ASTMIntl
.@CamaraProcemco, a key partner in the #construction industry in #colombia, has referenced numerous ASTM standards in its work with Colombian standardization committees, such as @InviasOficial #cement Stabilization Review Committee and @ICONTEC Standardization Committees. More at
-
ASTM International
@ASTMIntl
ASTM’s #consumerproducts committee (F15) creates standards that help keep products safe. In a new STANDARDIZATION NEWS interview, three committee members who represent consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
ASTM International committees are helping to ensure that the water we use every day is provided at a degree of purity and cleanliness appropriate to its end use, is transported efficiently, and is properly treated after it has been used. go.astm.org/4iUafl6
-
ASTM International
@ASTMIntl
ASTM’s #exoskeletons and #exosuits committee (F48) has proposed a new test method for evaluating exoskeleton device performance on #firstresponder tasks. go.astm.org/3GILScv
-
ASTM International
@ASTMIntl
The U.S. Standardization Center of Excellence for Critical and Emerging Technologies (SCoE) First Standardization Workshop kicked off this morning in Bethesda, MD. A large crowd was in attendance. Learn more about the workshop at www.astm.org/SCoE
-
ASTM International
@ASTMIntl
Find out how the committee on amusement rides and devices (F24) is addressing VR and AR for #rollercoasters, and how its many other published standards cover a wide range of aspects of the #amusementpark experience. go.astm.org/42O3wnO
-
ASTM International
@ASTMIntl
ASTM's forensic sciences committee (E30) is developing a proposed standard that will aid in the use of chemical analysis in #forensics studies. go.astm.org/4cpBkL0
-
ASTM International
@ASTMIntl
ASTM's #paint and related #coatings, materials, and applications committee has approved a new standard that will be useful for characterizing the #wettability of surfaces. It describes how to make such measurements by contact angle measurement using portable #goniometers.
-
ASTM International
@ASTMIntl
Join us for June 2025 Committee Week — June 22nd to the 26th in Toronto, Ontario, Canada. Meetings of D11 Rubber and Rubber-like Materials; D18 Soil & Rock; D37 Cannabis; E05 Fire Standards; E07 Nondestructive Testing; and more! go.astm.org/4cWLOC1
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
We are just a few days away from the first Standardization Workshop from the U.S. Standardization Center of Excellence (SCoE) for Critical and Emerging Technologies (CETs). Interested in learning more about the workshop and the SCoE? View the agenda: www.astm.org/SCoE
-
ASTM International
@ASTMIntl
ASTM’s committee on #consumerproducts (F15) creates standards that help keep products safe. In this new STANDARDIZATION NEWS interview, three committee members who represent #consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
ASTM’s #exoskeletons and #exosuits committee (F48) has proposed a new test method for evaluating exoskeleton device performance on #firstresponder tasks. www.astm.org/news/firefighter-exoskeletons-tested-in-prop…
-
ASTM International
@ASTMIntl
ASTM's #additivemanufacturing technologies committee is developing a standard to cover environment, health, and safety principles for use of #polymers with material extrusion (#mex). In MEX technology, material is extruded through a nozzle to build 3D objects one layer at a time.
-
ASTM International
@ASTMIntl
Join us for D02 June Committee Week in Kansas City, Missouri, June 22-26, 2025. Meetings of D02 Petroleum Products, Liquid Fuels, and Lubricants; D19 Water; D34 Waste Management; G03 Weathering and Durability; and more! na.eventscloud.com/website/73580/
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM’s #vacuumcleaners committee (F11) is developing a standard specification for battery-operated #cleaning appliances that will provide a test method for battery-powered surface cleaning appliances to help with #battery certification, testing, compliance, reliability, more. Go
-
ASTM International
@ASTMIntl
Join us for June 2025 Committee Week — June 22nd to the 26th in Toronto, Ontario, Canada. Meetings of D11 Rubber and Rubber-like Materials; D18 Soil & Rock; D37 Cannabis; E05 Fire Standards; E07 Nondestructive Testing; and more! go.astm.org/4cWLOC1
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
.@CamaraProcemco, a key partner in the #construction industry in #colombia, has referenced numerous ASTM standards in its work with Colombian standardization committees, such as @InviasOficial #cement Stabilization Review Committee and @ICONTEC Standardization Committees.
-
ASTM International
@ASTMIntl
Find out how the committee on amusement rides and devices (F24) is addressing VR and AR for #rollercoasters, and how its many other published standards cover a wide range of aspects of the #amusementpark experience. go.astm.org/42O3wnO
-
ASTM International
@ASTMIntl
ASTM’s #exoskeletons and #exosuits committee (F48) has proposed a new test method for evaluating exoskeleton device performance on #firstresponder tasks. go.astm.org/3GILScv
-
ASTM International
@ASTMIntl
The Great Baltimore #fire of February 1904 burned over 1,500 buildings to the ground, and helped lead to the formation of the ASTM's committee on fireproofing materials. Learn about their standards for #firesafety. go.astm.org/3GE85IE
-
ASTM International
@ASTMIntl
ASTM’s fatigue and fracture committee (E08) is developing a proposed standard that describes a procedure to characterize the intrinsic resistance of #metals to the onset of fatigue crack growth. go.astm.org/4cKhlad
-
ASTM International
@ASTMIntl
Join us this Wednesday 5/7 at 9:30 GMT for a no-cost webinar: ASTM Compass: Leading Standards Development & Workflow Tools. #astm #standards Sign up at go.astm.org/4d73laL
-
ASTM International
@ASTMIntl
ASTM’s committee on #consumerproducts (F15) creates standards that help keep products safe. In this new STANDARDIZATION NEWS interview, three committee members who represent #consumers gave their takes on standards and the industry. go.astm.org/4m2lHO4
-
ASTM International
@ASTMIntl
When ASTM's cannabis committee meets at June Committee Week, among them will be hardworking emerging professionals. Darwin Millard — ASTM member and technical director of @CSQ_Cert — has been both an EP program member and a nominator. Learn more at go.astm.org/EP-anniversary
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Cynthia Annett is named ASTM International’s 2024 Professor of the Year and receives her award during ASTM’s April committee week in Toronto, Canada. This, and more, in the latest NextGen from STANDARDIZATION NEWS. go.astm.org/42KcrXw
-
ASTM International
@ASTMIntl
From front lines of war to #searchandrescue missions, #robots are helping with our most dangerous jobs. Check out Stands Impact. Wherever you get your #podcasts, or listen at go.astm.org/standards-impact-robotics
-
ASTM International
@ASTMIntl
The board of directors met in West Conshohocken, Pennsylvania, April 22-23.
Here is a summary of reports made and actions taken at those meetings.
go.astm.org/42Y4Jrk -
ASTM International
@ASTMIntl
ASTM International committees are helping to ensure that the #water we use every day is provided at a degree of purity and cleanliness appropriate to its end use, is transported efficiently, and is properly treated after it has been used. go.astm.org/4iUafl6
-
ASTM International reposted
Andy Kireta
@ASTMpres
Check out my latest article: Are You at the Table or on the Menu? www.linkedin.com/pulse/you-table-menu-andy-kireta-stzac via @LinkedIn
-
ASTM International
@ASTMIntl
ASTM's June 2025 Committee Week meets June 22nd to the 26th in Toronto, Ontario, Canada. Meetings of C09 Concrete and Concrete Aggregates; D04 Road and Paving Materials; D13 Textiles; D18 Soil & Rock; and more! go.astm.org/4cWLOC1
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
How can #standards help accelerate critical and emerging technologies? Join us for the first #standardization Workshop from the U.S. Standardization Center of Excellence for Critical and Emerging Technologies. go.astm.org/4cfWSK4
-
ASTM International
@ASTMIntl
ASTM is proud to be among the sponsors of @IntlCodeCouncil's 2025 #buildingsafety365 Month — an international campaign celebrated in May to raise awareness about building safety. www.iccsafe.org/advocacy/building-safety-month/building-s…
-
ASTM International
@ASTMIntl
The #robots are coming - and they’re here to help. From today’s food delivery robots to tomorrow’s cattle herders, the latest episode of Standards Impact podcast touches all aspects of the evolving #robotics industry. With guest @Aaron_at_ASTM. Listen at go.astm.org/standards-for-robots
-
ASTM International
@ASTMIntl
As unmanned #aircraft fill the skies, partnerships around the world will help harmonize standards - and manage the crowded civil #airspace. go.astm.org/4hIVwZv
-
ASTM International
@ASTMIntl
ASTM's #paint and related #coatings, materials, and applications committee has approved a new standard that will be useful for characterizing the #wettability of surfaces. It describes how to make such measurements by contact angle measurement using portable #goniometers.
-
ASTM International
@ASTMIntl
ONLY TWO WEEKS until the first U.S. Standardization Center of Excellence for Critical and Emerging Technologies (SCoE) First Standardization Workshop, to be held May 14-15 in Bethesda, MD. Register your interest and view the workshop schedule at www.astm.org/scoe
-
ASTM International
@ASTMIntl
Join us for ASTM's May 2025 Committee Week! May 4th to the 9th in Toronto. Attend meetings of: E04 Metallography; E08 Fatigue and Fracture; F09 Tires; and more! Visit na.eventscloud.com/website/72085/
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Thousands of #detention and #correctional facilities around the world rely on standards to guide many of the #construction and #security measures that are implemented across the industry. go.astm.org/4lkLsZz
-
ASTM International
@ASTMIntl
ASTM's forensic sciences committee (E30) is developing a proposed standard that will aid in the use of chemical analysis in #forensics studies. go.astm.org/4cpBkL0
-
ASTM International
@ASTMIntl
ASTM’s soil and rock committee (D18) is developing a proposed standard that will be used to obtain parameters for discrete element method (#dem) calibration. This will make DEM accessible to small and medium enterprises (SME) who do not have the resources to pay specialist staff.
-
ASTM International
@ASTMIntl
ASTM’s fatigue and fracture committee (E08) is developing a proposed standard that describes a procedure to characterize the intrinsic resistance of #metals to the onset of fatigue crack growth. go.astm.org/4cKhlad
-
ASTM International
@ASTMIntl
Join us for ASTM's May 2025 Committee Week! May 4th to the 9th in Toronto. Attend meetings of: B02 Nonferrous Metals and Alloys; E28 Mechanical Testing; F04 Medical and Surgical Materials and Devices; F15.58 Powered Scooters & Skateboards; and more! Visit go.astm.org/44r1SJQ
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
The Conference on #hydrogen in Materials will be held June 3-6. Organized by ASTM Committee F07.04 on Hydrogen Embrittlement, it will be held at La Rochelle University in La Rochelle, France. The language of the conference will be English. go.astm.org/3THUIeM
-
ASTM International
@ASTMIntl
Last week, Molly Lynyak, ASTM manager for the #consumerproducts committee (F15) spoke at the @ACCI_ORG Symposium in Pittsburgh. Joined by Courtney Griffin, director of @ConsumerFed, and Ken d'Entremont of @UUtah.
-
ASTM International
@ASTMIntl
ASTM membership is the best of both worlds: members help make the world work better through the development of standards, while benefiting their personal and professional growth along the way. go.astm.org/4iK6Zcd
-
ASTM International
@ASTMIntl
We asked J Brian Hall of @westinghouse, and chair of ASTMl’s committee on nuclear technology and applications (E10), "How have standards affected the development of #nuclear technology in the U.S., or globally?" go.astm.org/4iu8sDU
-
ASTM International
@ASTMIntl
For @DiamondAircraft, ASTM standards have been instrumental in harmonizing traditional #aviation practices with the demands of sustainable aviation. go.astm.org/3ReHsfs
-
ASTM International
@ASTMIntl
ASTM's #additivemanufacturing technologies committee is developing a standard to cover environment, health, and safety principles for use of #polymers with material extrusion (#mex). In MEX technology, material is extruded through a nozzle to build 3D objects one layer at a time.
-
ASTM International
@ASTMIntl
For the people of Myanmar suffering from the recent devastating earthquakes, ASTM has made a donation to @Americares to support their Myanmar Earthquake Relief Efforts. Helping our world work better starts with helping people in need.
-
ASTM International
@ASTMIntl
ASTM's #paint and related #coatings, materials, and applications committee has approved a new standard that will be useful for characterizing the #wettability of surfaces. It describes how to make such measurements by contact angle measurement using portable #goniometers.
-
ASTM International
@ASTMIntl
Thousands of #detention and #correctional facilities around the world rely on standards to guide many of the #construction and #security measures that are implemented across the industry. go.astm.org/4lkLsZz
-
ASTM International
@ASTMIntl
ASTM's hazardous substances and oil spill response committeeis developing a proposed standard for measuring evaporation rate of oils and #petroleum that will provide a uniform way to predict evaporation of #oil that has been released in a spill. go.astm.org/41A3azt
-
ASTM International
@ASTMIntl
ASTM’s medical and surgical materials and devices committee will aid procedures for multiplying tissue cell cultivation in laboratory situations. Both normal and diseased tissue cells are cultured in labs for research, drug discoveries, toxicological tests, and producing products for cell therapies and cultured food. go.astm.org/4jfz2ky
-
ASTM International
@ASTMIntl
ASTM's forensic sciences committee (E30) is developing a proposed standard that will aid in the use of chemical analysis in #forensics studies. go.astm.org/4cpBkL0
-
ASTM International
@ASTMIntl
ASTM's #additivemanufacturing technologies committee is developing a standard to cover environment, health, and safety principles for use of #polymers with material extrusion (#mex). In MEX technology, material is extruded through a nozzle to build 3D objects one layer at a time.
-
ASTM International
@ASTMIntl
Join us for ASTM's May 2025 #committeeweek! May 4th to the 9th in Toronto. Attend meetings of: A01 #steel, Stainless Steel and Related Alloys; E08 Fatigue and Fracture; F08 #sports Equipment, Playing Surfaces, and Facilities; F09 #tires; and more! Visit go.astm.org/44r1SJQ
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Now in its 10th #anniversary year, ASTM's #emergingprofessionals (EP) program seeks to create opportunities that facilitate participation for new members who have demonstrated potential to be committee leaders. Watch EP graduate Apurba Banerjee discuss how the program helped her.
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM's #paint and related #coatings, materials, and applications committee has approved a new standard that will be useful for characterizing the #wettability of surfaces. It describes how to make such measurements by contact angle measurement using portable #goniometers.
-
ASTM International
@ASTMIntl
Workshop for On-Line Process NMR (Nuclear Magnetic Resonance) Technology: Utilizing ASTM Standards and Practices. June 23rd. Organized by ASTM Committee D02 on Petroleum Products and Lubricants, it will be held in Kansas City, Missouri. go.astm.org/488bR6S
-
ASTM International
@ASTMIntl
Unlock the Power of ASTM’s Digital #library now hosted on Silverchair! Experience an innovative platform that gives you access to thousands of industry #standards, technical papers, and #research materials to stay ahead in your field. go.astm.org/4j5Jc7c
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Join ASTM member and materials testing expert Shawn Byrd of Tinius Olsen as he highlights the latest industry innovations and explains their impact on standards in a webinar to be held tomorrow, April 10, at 10am ET / 4pm CEST: Innovations in Material Testing & Standardization / Innovationen in Materialprüfung und Normung. go.astm.org/4cnPdtb
-
ASTM International
@ASTMIntl
Held at @SheratonCentre Toronto during meetings of the committees in April, a special lunch was held to better connect with members and celebrate ASTM's accomplishment — and its future. President Andy Kireta @ASTMpres and Board Chair Cassy Robinson spoke.
-
ASTM International
@ASTMIntl
How do standards for #baseballs and #baseball #bats impact the game? Hear us discuss it — plus a late-breaking conversation about the “torpedo bats” that recently brought a bit of controversy to the game — on our latest #podcast episode. go.astm.org/4i4XFyE
-
ASTM International
@ASTMIntl
Thousands of #detention and #correctional facilities around the world rely on standards to guide many of the #construction and #security measures that are implemented across the industry. go.astm.org/4lkLsZz
-
ASTM International
@ASTMIntl
Join us for the first Standardization Center of Excellence (#scoe) Critical and Emerging Technologies (CET) Standardization Workshop — May 14-15 in Washington, D.C. — to help shape the future of CET #standardization. go.astm.org/4cfWSK4
-
ASTM International
@ASTMIntl
#torpedo #bats. Drag. Lift. Learn more about exciting new developments and the #science and #standards at play in #baseball on the latest episode of Standards Impact. Wherever you get your #podcasts, or visit go.astm.org/standards-impact-baseball
-
ASTM International
@ASTMIntl
ASTM membership is the best of both worlds: members help make the world work better through the development of standards, while benefiting their personal and professional growth along the way. go.astm.org/4iK6Zcd
-
ASTM International
@ASTMIntl
For @DiamondAircraft, ASTM standards have been instrumental in harmonizing traditional #aviation practices with the demands of sustainable aviation. go.astm.org/3ReHsfs
-
ASTM International
@ASTMIntl
ASTM’s #sports equipment, playing surfaces, and facilities committee (F08) is developing a proposed standard that will cover the specification, purchase, installation, and maintenance of synthetic #turf for #playground surfacing. go.astm.org/4iHVBhm
-
ASTM International
@ASTMIntl
ASTM’s #petroleum products, liquid #fuels, and lubricants committee (D02) is developing a new test method for rapid kinematic #viscosity measurement. go.astm.org/4bVelY9
-
ASTM International
@ASTMIntl
Join us for the virtual Exploratory Workshop on Emerging Technology Commercialization on April 23. Co-hosted by The Government-University-Industry-Philanthropy Research Roundtable (GUIPRR) of the National Academies of Sciences, Engineering, and Medicine, there is no fee to attend. go.astm.org/4iPBf5K
-
ASTM International
@ASTMIntl
The latest edition of the #wohlersreport — a premier resource for #additivemanufacturing (AM) market intelligence — has been officially released by Wohlers Associates, Powered by ASTM. Insights from over 230 experts across six continents. 475 pages of in-depth analysis.
-
ASTM International
@ASTMIntl
ASTM’s amusement rides and devices committee (F24) invites all interested parties to join in developing a proposed standard covering dry #slide systems. The committee is particularly interested in participation from designers and operators of both older and new slide systems.
-
ASTM International
@ASTMIntl
We asked J Brian Hall of @westinghouse, and chair of ASTMl’s committee on nuclear technology and applications (E10), "How have standards affected the development of #nuclear technology in the U.S., or globally?" go.astm.org/4iu8sDU
-
ASTM International
@ASTMIntl
ASTM International is currently accepting applications for its 2025 #graduate #scholarship, as well as The Katherine and Bryant Mather Scholarship. go.astm.org/3DNOwwx
-
ASTM International
@ASTMIntl
ASTM's activated carbon committee (D28) is developing a proposed standard that will be used to educate power #utilities on aspects of an activated carbon bid and their significance to the #energy industry. go.astm.org/3RdNH3n
-
ASTM International
@ASTMIntl
April 23: attend a workshop ASTM is holding in collaboration with the Government-University-Industry-Philanthropy Research Roundtable of the National Academies of Sciences, Engineering & Medicine about potential formation of a new activity on emerging technology commercialization (ETC) go.astm.org/4c7CEC5
-
ASTM International
@ASTMIntl
Advancing Standards. Transforming Markets. Learn how ASTM's brand continues to evolve. go.astm.org/3Xvlj03
-
ASTM International
@ASTMIntl
As unmanned #aircraft fill the skies, partnerships around the world will help harmonize standards - and manage the crowded civil #airspace. go.astm.org/4hIVwZv
-
ASTM International
@ASTMIntl
#gates help ensure safety and security in society, yet sometimes they themselves cause harm. Standards can help make them safer. go.astm.org/424Uwcn
-
ASTM International
@ASTMIntl
The Workshop on Hydrogen Fuel Contaminant Analyzers and Associated Data Quality — to be held December 8— will bring together industry experts, regulators, and end-users to discuss latest developments and challenges in hydrogen fuel contaminant measurement and quality assurance.
-
ASTM International
@ASTMIntl
ASTM’s #sports equipment, playing surfaces, and facilities committee (F08) is developing a proposed standard that will cover the specification, purchase, installation, and maintenance of synthetic #turf for #playground surfacing. go.astm.org/4iHVBhm
-
ASTM International
@ASTMIntl
ASTM’s #petroleum products, liquid #fuels, and lubricants committee (D02) is developing a new test method for rapid kinematic #viscosity measurement. go.astm.org/4bVelY9
-
ASTM International
@ASTMIntl
ASTM President Meets with Standards Officials in Asia. U.S. FDA Recognizes ASTM Test Method. ASTM at American Concrete Institute’s (ACI) Middle East Conference. And more in the new "Outreach" section of STANDARDIZATION NEWS. go.astm.org/4kPlFc1
-
ASTM International
@ASTMIntl
Join us March 25th at 10am ET for a pre-release webinar from Wohlers Associates as they prepare to release the latest edition of #wohlersreport — a leading resource for #additivemanufacturing (AM) market intelligence. go.astm.org/wohlers-report-pre-release-webinar-2025
-
ASTM International
@ASTMIntl
We asked J Brian Hall of @westinghouse, and chair of ASTMl’s committee on nuclear technology and applications (E10), "How have standards affected the development of #nuclear technology in the U.S., or globally?" go.astm.org/4iu8sDU
-
ASTM International
@ASTMIntl
ASTM membership is the best of both worlds: members help make the world work better through the development of standards, while benefiting their personal and professional growth along the way. go.astm.org/4iK6Zcd
-
ASTM International
@ASTMIntl
ASTM International is currently accepting applications for its 2025 #graduate #scholarship, as well as The Katherine and Bryant Mather Scholarship. go.astm.org/3DNOwwx
-
ASTM International
@ASTMIntl
ASTM began its "Better Together" program at its headquarters in West Conshohocken, PA today. With much of the organization assembled, @ASTMpres Andy Kireta gave opening remarks and introduced keynote speaker @PhilMartelli — a basketball legend.
-
ASTM International
@ASTMIntl
For @DiamondAircraft, ASTM standards have been instrumental in harmonizing traditional #aviation practices with the demands of sustainable aviation. go.astm.org/3ReHsfs
-
ASTM International
@ASTMIntl
As a member of ASTM International, you can make a difference in your industry by contributing to the development of #standards. Luckily, there are also many ways to make that membership work for you. go.astm.org/3DRfJhU
-
ASTM International
@ASTMIntl
ASTM'S committee on #quality and #statistics (E11) was officially established in 1946, and its first chairman was the statistician Harold F. Dodge. Learn more at go.astm.org/43SowdS
-
ASTM International
@ASTMIntl
ASTM's hazardous substances and oil spill response committeeis developing a proposed standard for measuring evaporation rate of oils and #petroleum that will provide a uniform way to predict evaporation of #oil that has been released in a spill. go.astm.org/41A3azt
-
ASTM International
@ASTMIntl
The Workshop on Assessing Characteristics of Cleaning Agents Intended to Clean Medical Devices will be held November 11th. Organized by ASTM Committee F04 on Medical and Surgical Materials and Devices, it will be held in Atlanta, Georgia. go.astm.org/3Fzsazr
-
ASTM International
@ASTMIntl
"An infrastructure of opportunity." That's how long-time member Joe Sinicrope describes ASTM's Emerging Professional (EP) Program. Watch this video celebrating the 10th anniversary of the program. And visit go.astm.org/emerging-professionals for more information.
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
The Workshop on Low-Carbon #concrete: Industry Trends and their Impact on ASTM Cement and Concrete Standards will be held December 7th in Atlanta, Georgia. Organized by ASTM Committee C01 on Cement and Committee C09 on Concrete and Concrete Aggregates. go.astm.org/3XUK3Pl
-
ASTM International
@ASTMIntl
Join us for April 2025 Committee Week! April 6-11, 2025 in Toronto. Meetings of: F45 Robotics, Automation, and Autonomous Systems; F48 Exoskeletons and Exosuits; F49 Digital Information in the Supply Chain; and more! na.eventscloud.com/website/70168/
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
The subcommittee on #climate and community (E50.07), part of the committee on environmental assessment, risk management and corrective action (E50), has proposed a guide for climate and community mapping. go.astm.org/3R1nxAo
-
ASTM International
@ASTMIntl
Are 3D printed #shoes and built-in pedometers the future of #footwear? Check out the latest episode of ASTM's Standards Impact podcast. Wherever you get your podcasts, or go.astm.org/footwear-standards
-
ASTM International
@ASTMIntl
While members have begun receiving print copies of the March / April issue of ASTM'S STANDARDIZATION NEWS #magazine, we have made the entire issue available digitally. Focusing on UAS standards, the issue also has articles concerning standards for gate safety, climate mapping... and more! go.astm.org/SN-March-April-2025
-
ASTM International
@ASTMIntl
The upcoming "ASTM Conference on Overcoming Barriers to Entry in #cannabis and Hemp Industries: Views from Around the World" will be held virtually with the release of prerecorded presentations to registrants on April 20, followed by 2 live Q&A sessions with the presenters in May. For more information, visit go.astm.org/46AK7FA
-
ASTM International
@ASTMIntl
#stormwater is largely unregulated. It can contain pollutants including chemical waste. To study the problem, one ASTM committee recently published a standard practice that will assess pollutant removal abilities of various stormwater control measures. go.astm.org/41dDKHK
-
ASTM International
@ASTMIntl
Managing increasingly crowded civil airspace is the job of the FAA and similar civilian aviation authorities worldwide. These regulators rely on standards like ones created by ASTM and its overseas counterparts to assess safety and airworthiness of unmanned aerial vehicles #uav.
-
ASTM International
@ASTMIntl
#advancedmanufacturing — the latest installment in the Standardization Impact Report — is now available. #am #additivemanufacturing #manufacturing #standards Download PDF: go.astm.org/impact-report-advanced-manufacturing
-
ASTM International
@ASTMIntl
Membership in ASTM offers numerous benefits, from participation in #standards development, to professional #networking, to personal growth and #leadership opportunities. go.astm.org/power-of-membership
-
ASTM International
@ASTMIntl
Embracing existing ASTM standards has helped the #fence industry elevate #gate-safety awareness and increase its levels of professionalism and expertise. go.astm.org/dangers-of-gates
-
ASTM International
@ASTMIntl
18th International Symposium on #reactor Dosimetry will be held May 18-23 in Charleston, South Carolina. by ASTM's #nuclear technology and applications committee (E10) and the European Working Group on Reactor Dosimetry (EWGRD). go.astm.org/48Mc4uZ
-
ASTM International
@ASTMIntl
Specialty work #boots. High #heels. 3D printed #shoes. Learn about the many ways ASTM standards help put your best foot forward. Wherever you get your podcasts, or visit go.astm.org/footwear-standards
-
ASTM International
@ASTMIntl
ASTM's digital information in the #supplychain committee has developed a pioneering standard guide for verifying Certificates of Authentication (COA) used to verify product-related documents through the goods movement process, incorporating blockchain technology.
-
ASTM International
@ASTMIntl
Standards help ensure that equipment used by #firstresponders keeps them safe and helps them to do their jobs. #firefighters #police #homelandsecurity #bombrobots See go.astm.org/3W8N9hM
-
ASTM International
@ASTMIntl
#astm's brand continues to evolve. Learn more in "Advancing #standards. Transforming #markets," a STANDARDIZATION NEWS feature article. #business #industry #branding #acronyms See go.astm.org/4gG5wmt
-
ASTM International
@ASTMIntl
A new ASTM standard will provide users with a road map for planning and executing assessments of per- and polyfluoroalkyl substances (#pfas) in consumer products and articles. go.astm.org/424UjHB
-
ASTM International
@ASTMIntl
ASTM's #petroleum products, liquid #fuels, and #lubricants committee (D02) is developing a proposed standard that will describe a procedure for simultaneously measuring the kinematic viscosity, dynamic viscosity, and density of liquid petroleum products and crude #oil.
-
ASTM International
@ASTMIntl
ASTM’s #hydrogen and #fuelcells subcommittee (D03.14) and #water committee (D19) are seeking participation in a new task group on #hydrogen-based #electrolyzers and #fuel cells. go.astm.org/3Z5l8Ka
-
ASTM International
@ASTMIntl
A new ASTM standard addresses safety elements of #polevaulting areas. It establishes safety, performance, and maintenance recommendations for indoor/outdoor, and private-use pole vault facilities. go.astm.org/40arGX4
-
ASTM International
@ASTMIntl
#advancedmanufacturing — the latest installment in the Standardization Impact Report — is now available for download. #am #additivemanufacturing #manufacturing. Get a PDF of the report at go.astm.org/435YwLT
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
A new standard is helping to mitigate effects of toxic #stormwater runoff. “Many people in our industry look to ASTM standards to ensure that things are being done well,” says Carla Milesi, vice chair of the stormwater control measures committee. go.astm.org/41dDKHK
-
ASTM International
@ASTMIntl
#artificialintelligence (#ai) and #machinelearning (#ml) offer many benefits, but standards are needed to incorporate them into processes and #manufacturing. go.astm.org/4jawMLK
-
ASTM International
@ASTMIntl
April 2025 Committee Week will be held April 6-11in Toronto, Canada. Meetings of: E60 Sustainability; F02 Primary Barrier; F45 Robotics, Automation, and Autonomous Systems; F49 Digital Information in the Supply Chain. And more! Visit na.eventscloud.com/website/70168/
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
ASTM's #commercialspaceflight committee (F47) is developing a proposed standard that will contain recommended practices and design elements for #suborbital #space vehicles, #orbital space vehicles, and orbital platforms (#spacestations). go.astm.org/3OsPPCR
-
ASTM International
@ASTMIntl
Standards help ensure that equipment used by #firstresponders keeps them safe and helps them to do their jobs. #firefighters #police #homelandsecurity #bombrobots See go.astm.org/3W8N9hM
-
ASTM International
@ASTMIntl
Scott Kasen and Griffin Keller of Austal USA Advanced Technologies @Austal_USA
discuss "Strengthening Supply Chains: Austal USA and ASTM," in the latest business case from STANDARDIZATION NEWS. See go.astm.org/4gH8yXK -
ASTM International
@ASTMIntl
ASTM’s #hydrogen and #fuelcells subcommittee (D03.14) and #water committee (D19) are seeking participation in a new task group on #hydrogen-based #electrolyzers and #fuel cells. go.astm.org/3Z5l8Ka
-
ASTM International
@ASTMIntl
Scott Kasen and Griffin Keller of Austal USA Advanced Technologies @Austal_USA discuss "Strengthening Supply Chains: Austal USA and ASTM," in the latest business case from STANDARDIZATION NEWS. See go.astm.org/4gH8yXK
-
ASTM International
@ASTMIntl
ASTM's #petroleum products, liquid #fuels, and #lubricants committee (D02) is developing a proposed standard that will describe a procedure for simultaneously measuring the kinematic viscosity, dynamic viscosity, and density of liquid petroleum products and crude #oil.
-
ASTM International
@ASTMIntl
ASTM's digital information in the #supplychain committee has developed a pioneering standard guide for verifying Certificates of Authentication (COA) used to verify product-related documents through the goods movement process, incorporating blockchain technology.
-
ASTM International
@ASTMIntl
A new ASTM standard will provide users with a road map for planning and executing assessments of per- and polyfluoroalkyl substances (#pfas) in consumer products and articles. go.astm.org/424UjHB
-
ASTM International
@ASTMIntl
The Workshop on Designing Equipment and Cleaning Processes to Increase Efficiency and Reduce Cost and Waste will be held May 7-8, 2025. Organized by ASTM Committee E55 on Manufacture of Pharmaceutical and Biopharmaceutical Products, it will be held in Toronto, Canada.
-
ASTM International
@ASTMIntl
Advanced #manufacturing — the latest installment in the Standardization Impact Report — is now available for download. Get a PDF of the report at go.astm.org/impact-report-advanced-manufacturing
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Standards help ensure that equipment used by #firstresponders keeps them safe and helps them to do their jobs. #firefighters #police #homelandsecurity #bombrobots See go.astm.org/3W8N9hM
-
ASTM International
@ASTMIntl
A new ASTM standard will provide users with a road map for planning and executing assessments of per- and polyfluoroalkyl substances (#pfas) in consumer products and articles. go.astm.org/424UjHB
-
ASTM International
@ASTMIntl
Scott Kasen and Griffin Keller of Austal USA Advanced Technologies @Austal_USA discuss "Strengthening Supply Chains: Austal USA and ASTM," in the latest business case from STANDARDIZATION NEWS. See go.astm.org/4gH8yXK
-
ASTM International
@ASTMIntl
A new ASTM standard addresses safety elements of #polevaulting areas. It establishes safety, performance, and maintenance recommendations for indoor/outdoor, and private-use pole vault facilities. go.astm.org/40arGX4
-
ASTM International
@ASTMIntl
In the latest issue of STANDARDIZATION NEWS, we sat down with Gillian L. Schauer, Ph.D. from the #cannabis Regulators Association (CANNRA) for a discussion about "The Changing Landscape for Cannabis." @CannRegulators Read the interview at go.astm.org/4fJ6EEN
-
ASTM International
@ASTMIntl
ASTM’s #hydrogen and #fuelcells subcommittee (D03.14) and #water committee (D19) are seeking participation in a new task group on #hydrogen-based #electrolyzers and #fuel cells. go.astm.org/3Z5l8Ka
-
ASTM International
@ASTMIntl
The Workshop on the Characterization of #hydrogel Medical Products will be held May 6th. Organized by ASTM Committee F04 on #medical and #surgical Materials and Devices, it will be held in #toronto, Canada in conjunction with the #standards development meetings of the committee.
-
ASTM International
@ASTMIntl
Search and #rescue. Monitoring #wildfires. #package delivery. Learn about the growing list of ways #drones impact our daily lives and the #standards that support them on the latest episode of Standards Impact. Wherever you get #podcasts or listen at go.astm.org/drone-podcast
-
ASTM International
@ASTMIntl
The Workshop on Battery Electric and Fuel Cell Vehicle Cooling Systems and Coolant will be held May 7th. Organized by ASTM Committee D15 on Engine Coolants and Related Fluids, it will be held in Toronto, Ontario, Canada in conjunction with the standards development meetings of the committee go.astm.org/3IPt1dN
-
ASTM International
@ASTMIntl
#astm's brand continues to evolve. Learn more in "Advancing #standards. Transforming #markets," a STANDARDIZATION NEWS feature article. #business #industry #branding #acronyms See go.astm.org/4gG5wmt
-
ASTM International
@ASTMIntl
#artificialintelligence (#ai) and #machinelearning (#ml) offer many benefits, but standards are needed to incorporate them into processes and #manufacturing. go.astm.org/4jawMLK
-
ASTM International
@ASTMIntl
Are you an ASTM member who is a representative of a regional, national, or subnational #government agency? You may need to be mindful of different considerations than other stakeholders in an ASTM International committee. go.astm.org/3PsEmDz
-
ASTM International
@ASTMIntl
ASTM's #commercialspaceflight committee (F47) is developing a proposed standard that will contain recommended practices and design elements for #suborbital #space vehicles, #orbital space vehicles, and orbital platforms (#spacestations). go.astm.org/3OsPPCR
-
ASTM International
@ASTMIntl
A new ASTM standard will enable the assessment of the pollutant removal ability of #stormwater control measures. go.astm.org/42hlpf2
-
ASTM International
@ASTMIntl
A new ASTM standard will provide users with a road map for planning and executing assessments of per- and polyfluoroalkyl substances (#pfas) in consumer products and articles. go.astm.org/424UjHB
-
ASTM International
@ASTMIntl
ASTM's digital information in the #supplychain committee has developed a pioneering standard guide for verifying Certificates of Authentication (COA) used to verify product-related documents through the goods movement process, incorporating blockchain technology.
-
ASTM International
@ASTMIntl
Standards help ensure that equipment used by #firstresponders keeps them safe and helps them to do their jobs. #firefighters #police #homelandsecurity #bombrobots See go.astm.org/3W8N9hM
-
ASTM International
@ASTMIntl
ASTM's #petroleum products, liquid #fuels, and #lubricants committee (D02) is developing a proposed standard that will describe a procedure for simultaneously measuring the kinematic viscosity, dynamic viscosity, and density of liquid petroleum products and crude #oil.
-
ASTM International
@ASTMIntl
Join us for April 2025 Committee Week, April 6-11, in Toronto, Ontario, Canada! Registration is open. Meetings of B05 #copper; D10 #packaging; D20 #plastics. D22 #air Quality. And more! Hotel and committee meeting information at go.astm.org/4aNkLYK
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
In the latest issue of STANDARDIZATION NEWS, we sat down with Gillian L. Schauer, Ph.D. from the #cannabis Regulators Association (CANNRA) for a discussion about "The Changing Landscape for Cannabis." @CannRegulators Read the interview at go.astm.org/4fJ6EEN
-
ASTM International
@ASTMIntl
A new ASTM standard addresses safety elements of #polevaulting areas. It establishes safety, performance, and maintenance recommendations for indoor/outdoor, and private-use pole vault facilities. go.astm.org/40arGX4
-
ASTM International
@ASTMIntl
ASTM's #commercialspaceflight committee (F47) is developing a proposed standard that will contain recommended practices and design elements for #suborbital #space vehicles, #orbital space vehicles, and orbital platforms (#spacestations). go.astm.org/3OsPPCR
-
ASTM International
@ASTMIntl
Scott Kasen and Griffin Keller of Austal USA Advanced Technologies @Austal_USA discuss "Strengthening Supply Chains: Austal USA and ASTM," in the latest business case from STANDARDIZATION NEWS. See go.astm.org/4gH8yXK
-
ASTM International
@ASTMIntl
Unmanned aircraft systems, popularly known as #drones, have been in the skies and, thus in the news, quite often recently. Check out this article from STANDARDIZATION NEWS that looks at the latest episode of ASTM's podcast. Includes embedded player for listening to the show.
-
ASTM International
@ASTMIntl
Advanced #manufacturing — the latest installment in the Standardization Impact Report — is now available for download. Get a PDF of the report at go.astm.org/impact-report-advanced-manufacturing
This media couldn't be displayed. See it on the original post. -
ASTM International
@ASTMIntl
Symposium on Changing Face of #building Materials and Systems in Response to #climatechange will be held April 9-10. Organized by Committee C16 on Thermal #insulation, it will be held in Toronto, Canada in conjunction with meetings of the committee. go.astm.org/3HtGKpS
-
ASTM International
@ASTMIntl
ASTM’s #hydrogen and #fuelcells subcommittee (D03.14) and #water committee (D19) are seeking participation in a new task group on #hydrogen-based #electrolyzers and #fuel cells. go.astm.org/3Z5l8Ka
-
ASTM International
@ASTMIntl
Are you an ASTM member who is a representative of a regional, national, or subnational #government agency? You may need to be mindful of different considerations than other stakeholders in an ASTM International committee. go.astm.org/3PsEmDz
-
ASTM International reposted
-
ASTM International
@ASTMIntl
ASTM's robotics, automation, and autonomous systems committee has proposed a new standard practice on inducing workplace disturbances in mobile manipulators. Factors like passing heavy equipment can unsettle automated arms working in unstructured manufacturing environments.
-
ASTM International
@ASTMIntl
#astm's brand continues to evolve. Learn more in "Advancing #standards. Transforming #markets," a STANDARDIZATION NEWS feature article. #business #industry #branding #acronyms See go.astm.org/4gG5wmt
-
ASTM International
@ASTMIntl
Join us LIVE today from the International Space Station! Commercial spaceflight committee member Michael Lopez-Alegria @CommanderMLA will conduct an event about F47 and industry safety standards... from #space! TODAY at 11:40am EST (photo courtesy @SpaceX) go.astm.org/YouTube-live
-
ASTM International
@ASTMIntl
New Belgium’s Ali Schultz explains the science behind #beer evaluation, how someone becomes a professional beer taster, and why #standards are important for#SensoryStudies.
@newbelgium #sensoryevaluation See go.astm.org/3RoX1ke -
ASTM International
@ASTMIntl
New Belgium’s Ali Schultz explains the science behind #beer evaluation, how someone becomes a professional beer taster, and why #standards are important for#SensoryStudies. @newbelgium #sensoryevaluation See go.astm.org/3RoX1ke
-
ASTM International
@ASTMIntl
Our thanks to @CityCollegeNY CUNY for welcoming ASTM staff. L to R: ASTM's Brian Meincke, @ASTMpres Kathie Morgan, @bmeincke Brian Meincke; CCNY President Vince Boudreau, and Angelo Lampousis, environmental assessment, risk management, and corrective action committee member (E50)
-
ASTM International
@ASTMIntl
Check out a Q&A with 2023 ASTM Interational Board Chair Bill Ells, VP of sales for @Vibram. Includes video as well as his thoughts on ASTM's 125th anniversary. #footwear #outsole #boardofdirectors #astm125 See go.astm.org/2023-board-chair
-
ASTM International
@ASTMIntl
#cannabis committee has formed a new subcommittee on #sustainability. Seeks to develop sustainability standards tied to key @UN Sustainable Development Goals #sdgs to help the cannabis industry be more efficient/ transparent/ well-regulated. #globalgoals www.astm.org/news?q=update/new-cannabis-subcommittee-sust…
-
ASTM International
@ASTMIntl
Standard for flame mitigation devices on disposable #fuel #gas containers, published by #consumerproducts committee, being proposed as National Standard of Canada (NSC) @StandardsCanada. Canadian public / all members of public invited to provide feedback. www.astm.org/news?q=update/fuel-container-standard-propos…
-
ASTM International
@ASTMIntl
Standard for flame mitigation devices on disposable #fuel #gas containers, published by #consumerproducts committee, being proposed as National Standard of Canada (NSC) @StandardsCanada. Canadian public / all members of public invited to provide feedback. www.astm.org/news?q=update/fuel-container-standard-propos…
-
ASTM International
@ASTMIntl
Standard for flame mitigation devices on disposable #fuel #gas containers, published by #consumerproducts committee, being proposed as National Standard of Canada (NSC) @StandardsCanada. Canadian public / all members of public invited to provide feedback. www.astm.org/news?q=update/fuel-container-standard-adopte…
-
ASTM International
@ASTMIntl
Daniel Chidgey, head of #standards development at Standards #australia @standardsaus, spent time at our global HQ recently. We asked him what his impressions were of ASTM International. His answer? Watch the video.
-
ASTM International
@ASTMIntl
#safety Equipment Institute announces first certifications for chest protectors, meeting new National Operating Committee for #sports and #athletic Equipment criteria. According to @NOCSAE, standard aims to reduce likelihood of death from commotio cordis. www.astm.org/standardization-news/?q=update/sei-certifies…
-
ASTM International
@ASTMIntl
#safety Equipment Institute announces first certifications for chest protectors, meeting new National Operating Committee for #sports and #athletic Equipment criteria. According to @NOCSAE, standard aims to reduce likelihood of death from commotio cordis. www.astm.org/standardization-news/?q=update/sei-certifies…
-
ASTM International
@ASTMIntl
#safety Equipment Institute announces first certifications for chest protectors, meeting new National Operating Committee for #sports and #athletic Equipment criteria. According to @NOCSAE, standard aims to reduce likelihood of death from commotio cordis. www.astm.org/standardization-news/?q=update/sei-certifies…
-
ASTM International
@ASTMIntl
.@Weyerhaeuser Easton PA 9/30 ASTM, working w/ @USDAForeignAg & Softwood Export Council, host reps from #peru considering #softwood standard



























































































































































































































































































































































































































































































































































































































































































































































































































































































































