Humbled to share a video of our electric motor-driven Agnilet engine's test firing as we get ready for Mission - 02. We can see the mach diamonds slowly emerge as we gradually throttle up. We can also see the mach diamonds slowly disappear as we throttle down.
For context - Agnilet already flew as a pressure-fed engine in our Mission - 01 on Agnibaan SOrTeD. This is a pump-driven Agnilet. Still single piece. Still fully 3d printed. Still semi cryo. Now with 3d printed pumps too.
More context - This also brings back our older horizontal semi-cryogenic engine test facility into action which will allow engine testing and flight qualification activities to happen in parallel.
@srinathr155 @moin_spm @satchakra_iitm
@iitmadras @IITMIC @iitm_respark @isro @INSPACeIND
@ANRFIndia @tdbgoi @IndiaDST @startupindia @makeinindia
@TIDCO_1965 @TN_SIPCOT @TheStartupTN @Guidance_TN @AP_EDB @startup_mission
#agnibaan #agniletrocketengine #agnilet #electricpumpfedengines #singlepieceengine #3dprinting #additivemanufacturing
AgniKul Cosmos
AgniKul Cosmos Private Limited is an Indian private aerospace manufacturer and commercial launch service provider based in National Centre for Combustion Research and Development (NCCRD) of IIT Madras, Chennai. The start up aims to develop and launch its own small-lift launch vehicle such as the Agnibaan, capable of placing 100 kg (220 lb) payload into a 700 km (430 mi) orbit. More on Wikipedia
-
AgniKul Cosmos
@AgnikulCosmos
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to sign an MoU with the Govt. Of Andhra Pradesh to invest in a unit that would build space-based orbital data center platforms and enable end-to-end support for equatorial and low inclination launch operations.
This would directly complement our efforts in Tamil Nadu, where our facilities will support launch to polar / sun synchronous orbits.
As a refresher, @AgnikulCosmos 's reusable Agnibaan launch vehicle has the capacity to extend its patented & extendable upper stage to be a platform that can host data centres. This stage extension adds to the effort of making Agnibaan fully reusable - the lower stage is recovered on a barge in the ocean & the upper stage is kept alive and extended beyond just one mission.
Honoured to be having the opportunity to build original space technology from India, for the world.
@CII_PS @AP_EDB @Industries_GoAP
@srinathr155 @moin_spm @satchakra_iitm
@iitmadras @iitm_respark @IITMIC
@ANRFIndia @tdbgoi @IndiaDST
@TN_SIPCOT @TIDCO_1965 @Guidance_TN @TheStartupTN @isro @INSPACeIND @startup_mission
#ciipartnershipsummit2026 -
AgniKul Cosmos
@AgnikulCosmos
In India, rockets are inseparable from our celebration of the festival of lights. So, Diwali is very special for all of us at Agnikul. Wishing you all a very happy Diwali.
(Also, this Diwali, we learnt that our own horizontal test stands show engine plume length much better than our vertical test stands - as seen in the electric motor driven Agnilet engine plume here)
@srinathr155 @moin_spm @satchakra_iitm
@iitmadras @IITMIC @iitm_respark @ANRFIndia @IndiaDST @tdbgoi @TN_SIPCOT @startupindia @TheStartupTN @Guidance_TN @TIDCO_1965 @startup_mission @isro @INSPACeIND -
AgniKul Cosmos reposted
BharatShakti.in
@BharatShaktiBSI
š Agnikul Cosmos: Reusable Rockets And The Business Of Space
ā¶ļø On The Shop Floor | Season 2, Episode 5
ā¶ļø With Editor-in-Chief @nitingokhale
š youtu.be/FEyBv75stIk
@AgnikulCosmos @srinathr155 @moin_spm @iitmadras @IITMICThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos reposted
BharatShakti.in
@BharatShaktiBSI
From an IIT Madras incubator to aiming for the stars.
Discover how Agnikul Cosmos is pushing the boundaries of Indiaās private space sector
Tune in to āOn The Shop Floorā, on 2 November.
@nitingokhale @AgnikulCosmos @srinathr155 @moin_spm @iitmadras @IITMIC -
AgniKul Cosmos
@AgnikulCosmos
Humbled to post an engine firing video of our single-piece Agnite engine. Here we completed a few thrust sweeps - something that is needed to understand throttling - and later, we let the engine run for a duration well beyond the max. burn time of some of our ascent phase engines. Also, for the first time, this video gave us all a few good Mach diamonds to cherish.
Mission - 02 is getting ever so closer.
As a refresher, Agnite is our booster stage semi-cryogenic engine - it stands 1 metre tall & the entire engine is 3d printed in a single shot, as a single piece of hardware. It is powered by electric motor-driven pumps.
@srinathr155 @moin_spm @satchakra_iitm @isro @INSPACeIND @iitmadras @iitm_respark
@IITMIC @IndiaDST @tdbgoi @ANRFIndia @TIDCO_1965 @startupindia @TheStartupTN @TN_SIPCOT @Guidance_TN @startup_mission #agnibaan #agniterocketengine #electricpumpfedengines #singlepieceengine #3dprinting #additivemanufacturingThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
When we started in December 2017, even though there was no clarity on policy, we believed that if we did the right things towards nation building, the Government will support us. Today, we are humbled and honoured to have the Government directly help us with capital through the RDI scheme, as we venture ahead towards building reusable rockets from India. Reusability requires the integration of propulsion, vehicle design, guidance, recovery and mission operations into a highly reliable system.
TDB providing support for this is unique and special for us as it shows that the Government is willing to back original technology development in India. This money will enable us to develop Agnibaan as a world class operational vehicle while also building an indigenous platform for repeatable access to space.
www.pib.gov.in/PressReleasePage.aspx?PRID=2314836®=3&lā¦
@srinathr155 @moin_spm @satchakra_iitm
@isro @INSPACeIND
@iitmadras @iitm_respark @IITMIC
@IndiaDST @tdbgoi @ANRFIndia
@TIDCO_1965 @startupindia @TheStartupTN @TN_SIPCOT @startup_mission -
AgniKul Cosmos reposted
YourStory
@YourStoryCo
āReusability & repeatability is the only path to commercial viability in the rocket business.ā
"And that will be the key to opening the doors to space," says Srinath Ravichandran, Co-founder & CEO of @AgnikulCosmos.
India could soon have its very own private, recoverable orbital class booster, a key step towards making rockets reusable and reducing launch costs. Behind this is Chennai based space tech firm Agnikul which achieved a series of firsts in its maiden launch in 2024 with the Agnibaan (SOrTED) rocket - being Indiaās first semi cryogenic rocket powered by the worldās first single piece 3d printed engine. It is now gearing up for a far more ambitious test.
On Episode 3 of the #thesparkseries, in the run up to #techsparks2026, we get a ringside view of preparations that are in full swing for Mission 2 at Agnikulās Testing & Assembly FacilityĀ at the IIT Madras Discovery Campus.
Founders @srinathr155 and @moin_spm break down how they are executing their launch āanywhere, anytime , affordably vision with a goal of productionalising 10 vehicles for 100 launches and outline their flexible "rocket-as-a-satellite" model where the upper stage can be transformed into an in-orbit platform.
Watch this episode for a deep dive on the engineering behind developing configurable launch vehicles, booster recovery systems aiming for early 2027 and how Indiaās private space sector is positioning itself to lead the global commercial launch market.
Watch the full conversation here - youtu.be/2BjPGs4Dl-E
TechSparks 2026 | Oct 13th,14th ,15thĀ Ā | Taj Yeshwantpur, Bengaluru
Get tickets here: techsparks.yourstory.com/2026/
#techsparks2026 #thesparkseries #reusablerockets #spacetech #deeptech #agnikul #newtechorder
@ShivMuths | @SharmaShradhaThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the inauguration of two of our units (STIF & PROOF) by Gaganyaatri Group Captain Shubhanshu Shukla @gagan_shux . Amidst his busy schedule he took time out to talk to the team, visit many of our engine test stands and also spoke to us about riding a launch vehicle to orbit - a conversation we will never ever forget as launch vehicle builders.
He also witnessed live the inaugural igniter firing in STIF.
About the facilities -
PROOF - PRessurant Overwrapping & Outfitting Facility to make pressure bottles in-house. Composite Overwrapped Pressure Vessels (COPVs) are the 'black coloured' wrapped pressure bottles - one of the trickiest systems in launch vehicles. In our previous launch, we flew three of them at 350 bar pressure and in Mission - 02 a few more would fly. Having a unit to manufacture these in house is operationally & quality wise efficient and a step towards reliable and repeatable stage performance.
STIF - Stage Testing & Inspection Facility which will be used both before and after a launch on the same hardware. This allows us to think about minimising the time taken from landing to recovery to inspection to refurbishment to reuse in an optimal manner.
Looking forward to a super exciting Mission - 02 from India, for the world.
@srinathr155 @moin_spm @satchakra_iitm @iitmadras @iitm_respark @IITMIC @TIDCO_1965 @TheStartupTN @Guidance_TN @startupindia @startup_mission @tdbgoi @ANRFIndia @IndiaDST @isro @INSPACeIND @TN_SIPCOT -
AgniKul Cosmos reposted
-
AgniKul Cosmos
@AgnikulCosmos
Happy Indian National Space day to everyone. Today is literally the best time to be building space technology in š®š³ India and at @AgnikulCosmos we are feeling incredibly lucky and honoured to have the chance to be developing and commercialising world class technology from India for the world.
@srinathr155 @moin_spm @satchakra_iitm
@iitmadras @iitm_respark @IITMIC @TIDCO_1965 @TheStartupTN @Guidance_TN @startupindia @startup_mission @tdbgoi @ANRFIndia @IndiaDST @isro @INSPACeIND @TN_SIPCOT #nationalspaceday #nspd2026 -
AgniKul Cosmos
@AgnikulCosmos
It was an honour to have the opportunity to interact with Honourable PM Shri. @narendramodi ji & other Indian space startups today at the Prime Minister's Office. While we were speaking about @AgnikulCosmos 's reusable missions and extendable upper stage, the PM was specifically interested in knowing how many others across the world have done these before. His message to all of us was to make India the "go to" nation for solving space technology problems that anyone is facing anywhere in the world.
#nspd2026 . A big thank you to @INSPACeIND for facilitating this interaction.
@srinathr155 @moin_spm @satchakra_iitm
@iitmadras @iitm_respark @IITMIC @IndiaDST @tdbgoi @ANRFIndia @isro @PMOIndia -
AgniKul Cosmos
@AgnikulCosmos
Having the wishes and support of our Honourable PM Shri. @narendramodi ji for our upcoming Mission - 02 is a dream come true for all of us at @AgnikulCosmos - This signed poster signed by our Honāble PM will go up not just on our factory walls but also in our hearts as a huge source of motivation as we strive to build original space technology from India, for the world.
Thanks to @INSPACeIND for creating this opportunity for us.
@srinathr155 @moin_spm @satchakra_iitm @iitmadras @iitm_respark @IITMIC @PMOIndia @startupindia @tdbgoi @ANRFIndia @IndiaDST @isro @TN_SIPCOT @Guidance_TN @TheStartupTN @TIDCO_1965 #nationalspaceday2026 -
AgniKul Cosmos
@AgnikulCosmos
Was lovely to have our team & their families participate in our Independence Day celebrations. Now is the best time to be building original space technology in India & it feels genuinely happy to be celebrating our 80th Independence Day in such a time with the team.
@srinathr155 @moin_spm @satchakra_iitm @iitmadras -
AgniKul Cosmos
@AgnikulCosmos
It was an honour for our cofounders to have met Honourable Minister of Industries, Investment Promotion & Commerce - TamilNadu, @Keerthana4VNR with our young women leaders to discuss our expansion plans in Tamil Nadu. Her story is truly inspirational and it was humbling to interact with someone who is so down to earth while also having the vision and dreams to make Tamil Nadu a world class state.
@srinathr155 @moin_spm @satchakra_iitm
@TIDCO_1965 @Guidance_TN @iitmadras @iitmrp @IITMIC @TheStartupTN @SIPCOTTN -
AgniKul Cosmos
@AgnikulCosmos
Hearty congratulations to the @SkyrootA team! Achieving orbit in the first orbital attempt is no mean feat. India just entered a new phase in its space heritage today.
Skyroot Aerospace
@SkyrootA
ORBIT ACHIEVED. š
Vikram-1 Test Flight-1 has reached orbit. India's first privately developed orbital rocket has completed its final burn and injected its payloads into a ~450 km orbit, making India the third country in the world with private orbital launch capability.
History is made. š®š³
#vikram1 #journeytoorbit #skyrootaerospace -
AgniKul Cosmos
@AgnikulCosmos
It is an absolute honour for us that Dr. S Somanath ever so kindly agreed to join us as an Oberver on our Board. Thank you @SomanathSpeak Sir.
Every single person at @AgnikulCosmos is inspired by the vision, clarity and engineering acumen he brings to our country. To have someone we look upto at that level mentor us as we build ambitious missions is truly a blessing and a dream come true.
Our upcoming Mission - 02 is a mission to remove, as much as possible, the use of one time use systems in rockets, at every single level - from engines to entire stages. Having Dr. Somanath advise us on such a mission and on other strategic initiatives ahead of us is very valuable.
We are where we are because of @isro , @INSPACeIND and @iitmadras and we continue to commit as a team to build original and new space technology for the world, from India.
@srinathr155 @moin_spm @satchakra_iitm
@iitmadras @iitmrp @IITMIC
@SIPCOTTN @TIDCO_1965 @startup_mission @tdbgoi @IndiaDST @ANRFIndia @startupindia @TheStartupTN @Guidance_TN
In the photo : Dr. Somanath with the Agnikul team during Agnikulās Mission - 01 which flew Agnibaan SOrTeD -
AgniKul Cosmos
@AgnikulCosmos
It was an absolute honour to present the features of AgniKul Cosmos's Agnibaan launch vehicle at Nice, France in the hashtag #bharatinnovates2026 event. We had the incredible opportunity to speak directly to His Excellency President Emmanuel Macron @EmmanuelMacron and Honourable Prime Minister Shri. Narendra Modi @narendramodi about why our rockets are different and what is new.
We are extremely grateful to the Ministry of Education, India, & IIT Madras for selecting us as the only launch vehicle company from India to showcase our Innovation at Bharat Innovates 2026
In @AgnikulCosmos 's journey, we have always believed that building useful rockets should be through original technology that adds to what is missing in the rocket launch market today. Having the chance to showcase this technology - recoverable lower stages and extendable upper stage platforms - at a global stage is a dream come true and is a huge shot of inspiration for all us at Agnikul.
The whole event is actually a humble reminder to all of us about what is today possible from India, for the world.
@BharatInnov2026
@MEAIndia @IndiaembFrance @EduMinOfIndia @PMOIndia @PrinSciAdvGoI @IndiaDST @tdbgoi
@iitmadras @iitmrp @IITMIC #bharatinnovates2026
@srinathr155 @moin_spm @satchakra_iitm
@ANRFIndia @tdbgoi @IndiaDST @isro @INSPACeIND
#startupindia #agnibaan #rocketenginecluster #electricpumpfedengines #singlepieceengine #3dprinting #additivemanufacturing
@TIDCO_1965 @TheStartupTN @Guidance_TN @TN_SIPCOT @startup_mission -
AgniKul Cosmos reposted
IIT Madras
@iitmadras
From IIT Madras to the global stage in France, Agnikul Cosmos is showcasing Indiaās growing leadership in space technology and innovation.
Selected to represent India at Bharat Innovates 2026, an initiative of the Ministry of Education, Government of India, being held in Nice, France, Agnikul is among a select group of deep-tech startups presenting breakthrough technologies to global investors, industry leaders, and research partners.
Founded at IIT Madras by Srinath Ravichandran, Co-founder & CEO, and Moin SPM, Co-founder & COO, under the guidance of Prof. Satyanarayanan Chakravarthy of the Department of Aerospace Engineering, IIT Madras, Agnikul is pioneering affordable, customizable access to space through its small-satellite launch vehicles.
Founded in 2017 and incubated at IIT Madras, the company achieved a historic milestone in 2024 with the launch of Agnibaan, powered by the worldās first single-piece 3D-printed semi-cryogenic rocket engine, Agnilet, from Indiaās first private launchpad.
As Agnikul heads to Bharat Innovates 2026, it exemplifies how IIT Madras-founded deep-tech ventures are making space more accessible, affordable, and innovative for the world.
@iitmadras @BharatInnov2026 @EduMinOfIndia @AgnikulCosmos
#bharatinnovates2026 #iitmadras #agnikulcosmos #spacetech -
AgniKul Cosmos reposted
Bharat Innovates
@BharatInnovMoE
Day 1, Highlights from Bharat Innovates 2026, a powerful showcase of Indiaās innovation ecosystem, driving the next wave of deep tech advancements and global partnerships.
@narendramodi @PMOIndia @eduminofindia @dpradhanbjp @PrinSciAdvGoI @Vineet_K26 @sanjayjavin @IndiaDST @AICTE_INDIA @ugcindia @pibindia @DDNewslive @airnewsalerts @sjaishankaroffc @Chatty111Prasad @MEABharat @IndiainPortugal @IndiaembFrance @CGIMarseille @eoiberlin @IndiainIreland @HCI_London @iitbombay @SINEIITB @paniitindia
#bharatinnovates #deeptech #innovation #startupindia #futurereadyThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos reposted
Narendra Modi
@narendramodi
Here are highlights from Niceā¦a great start to my France visit.
May the India-France friendship keep getting stronger.
@EmmanuelMacronThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to be featured right at the beginning of a video about the most innovative startups in India. Thank you @BharatInnov2026
#bharatinnovates2026 #indiafrance #innovation #startupindia @MEAIndia @EduMinOfIndia
@IndiaembFrance @BharatInnov2026
DD News
@DDNewslive
#watch | PM @narendramodi and French President Emmanuel Macron inaugurated Bharat Innovates 2026 in Nice, showcasing Indiaās innovation strength through 120+ DeepTech startups and global collaborations.
PM Modi highlighted that India is emerging as a contributor of solutions, not just a consumer, driven by innovation, inclusion and technology for global good. India today is home to over 2 lakh startups and the worldās third-largest startup ecosystem.
President Emmanuel Macron praised Indiaās rise as a global innovation powerhouse, reaffirming India-France cooperation in AI, DeepTech, technology and sustainable development.
#bharatinnovates2026 #indiafrance #innovation #startupindia @MEAIndia @EduMinOfIndia
@IndiaembFrance @BharatInnov2026This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos reposted
Moneycontrol
@moneycontrolcom
#mcopinion | šØ PM Modi, Macron to inaugurate Bharat Innovates 2026 in France tomorrow: Agnikul founders explain why showcasing India's deep tech matters
One of the devices that will be put on display at the event is Agnibaan, a fully configurable and reusable launch vehicle capable of carrying small satellites to low earth orbit.
@srinathr155 & @moin_spm write š
www.moneycontrol.com/news/india/pm-modi-macron-to-inaugur⦠-
AgniKul Cosmos reposted
Emmanuel Macron
@EmmanuelMacron
š®š³š«š·
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos reposted
Randhir Jaiswal
@MEAIndia
Driving innovation-led growth and global partnerships.
PM @narendramodi and President @EmmanuelMacron visited the startup exhibits at Bharat Innovates2026 and interacted with Indiaās young innovators, founders and researchers. These incubators and startups will be the growth engines of future creating jobs, prosperity and bolstering knowledge economy.
An inspiring moment for the next generation of innovators!
#bharatinnovates
#indiafranceyearofinnovation -
AgniKul Cosmos reposted
DD News
@DDNewslive
#watch | At #bharatinnovates, Co-Founder of @AgnikulCosmos, Srinath Ravichandran briefed PM @narendramodi and President @EmmanuelMacron on the startup's pioneering work in space technology, including converting a rocket upper stage into a satellite and developing a 3D-printed one-piece rocket engine for upcoming missions.
@MEAIndia @IndiaembFrance @MIB_India @PIB_India
@EduMinOfIndia #bharatinnovates2026 #agnikul #spacetech #innovation #startupindiaThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos reposted
IIT Madras
@iitmadras
š @iitmadras is heading to @BharatInnov2026 in Nice, France, showcasing Indiaās deep-tech innovation to a global audience.
The Institute will present 15 IIT Madras-incubated startups and breakthrough technologies across Blue Economy, Next-Generation Communications, Hyperloop, 5G/6G, Port Automation, Lab-Grown Diamonds, and indigenous low-compute AI ecosystems.
IIT Madras-incubated innovators, including Planys Technologies, Zerocircle, @fabheads , @REIOSystems, @atherenergy , @Astrometech , @wisignetworks , @AgnikulCosmos , @TuTrHyperloop , among others, will showcase solutions addressing challenges in sustainability, mobility, telecommunications, and infrastructure.
The showcase also highlights pioneering work from InCent-LGD, @Ntcpwc_offcl , and @IITMPravartak , demonstrating how research, innovation, and entrepreneurship are driving globally relevant impact.
From Chennai to France, IIT Madras continues to take Indian deep-tech innovation to the world.
@EduMinOfIndia
#bharatinnovates2026 #iitmadras #deeptech #startupindia -
AgniKul Cosmos
@AgnikulCosmos
Quick start of engines is important to achieve higher payload capability and better overall control of the vehicle after stage separation.
We successfully demonstrated a quick start of our 1 meter long, single piece, fully 3d printed, semi cryogenic Agnite engine.
The angular acceleration (rotations per second gained every second) that was achieved here is truly humbling. One advantage of liquid propellant rocket engines is that the lower stage of the vehicle can be started, checked and then flown on the launchpad.
Such a procedure demands extremely rapid pump ramp up times - this is what this test validated for us.
We are extremely grateful to have the opportunity to be building world class, original space technology from India, for the world with the support of
@iitmadras @isro & @INSPACeIND
From here on, the acceleration of engines to reach steady state will likely consume lesser and lesser fuel. #agnibaan #rocketenginecluster #electricpumpfedengines #agnilet #singlepieceengine #3dprinting #rocketenginetest #additivemanufacturing #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworld
@srinathr155 @moin_spm @satchakra_iitm @iitmadras @iitmrp @IITMIC @tdbgoi @IndiaDST @ANRFIndia @TIDCO_1965 @startupindia @TheStartupTN @Guidance_TN @startup_mission @SIPCOTTNThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
On this day in 2024, we flew Mission - 01, a fully controlled flight from a completely new location within Sriharikota, with our vehicle - Agnibaan SOrTeD. As we recollect this, we would like to take a moment to thank everyone - the Government, our investors, vendors, and our incredibly hardworking crew for coming together to make this happen.
We also recognise that this Mission had a few "firsts".
š World's first flight with a single-piece 3D-printed engine
š India's first semi-cryogenic engine-powered flight
š India's first flight powered by Linux OS and Ethernet architecture
and more...
We also remind ourselves that this was never a race though. This is about a very young team & their families, choosing to build completely new technology from India, for the world, and in that process help satellites get to orbit.
Here are some previously unseen photos from Mission - 01.
Super excited about Mission - 02.
#agnibaan #rocketenginecluster #electricpumpfedengines #agnilet #singlepieceengine #3dprinting #rocketenginetest #additivemanufacturing #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworld
@srinathr155 @moin_spm @satchakra_iitm @iitmadras @iitmrp @IITMIC @tdbgoi @IndiaDST @ANRFIndia
@TIDCO_1965 @startupindia @TheStartupTN @Guidance_TN @startup_mission @SIPCOTTN -
AgniKul Cosmos
@AgnikulCosmos
It is a unique opportunity and an honour to have been selected as one of the top deep tech startups in the country to be a part of the #bharatinnovates Investor Showcase held in Bengaluru. Innovation in India is more than just a sentiment now and we are seeing the transformation from just execution to design led execution happening all over the country at all levels - at educational institutions, research parks, startups and more. Thanks to @EduMinOfIndia @PMOIndia for making this happen and thanks for bringing us along in this journey. @iitmadras @iitmrp @IITMIC
#bharatinnovates2026
@narendramodi @PMOIndia @dpradhanbjp @eduminofindia @PrinSciAdvGoI @MEAIndia @IndiaembFrance @CGIMarseille @pibindia @DDNewslive @airnewsalerts
Ministry of Education
@EduMinOfIndia
š” Bharat Innovates Investor Showcase held in Bengaluru on 19th May.
24 of India's most promising deep-tech start-ups pitched to 90+ investors from 66 funds managing over $85 Bn in global Assets Under Management, across space, defence, biotech, semiconductors, quantum, robotics & more.
The road to #bharatinnovates2026 in Nice begins.
@narendramodi @PMOIndia @dpradhanbjp @eduminofindia @PrinSciAdvGoI @MEAIndia @IndiaembFrance @CGIMarseille @pibindia @DDNewslive @airnewsalertsThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to share that we successfully test fired 4 semi-cryogenic rocket engines simultaneously, as a cluster.
All the 4 engines are 3d printed as single pieces of hardware - designed and manufactured in-house at AgniKul Cosmos Rocket Factory - 1. As with all our propulsion systems, these 4 engines are also powered by electric motor driven pumps.
This test involved calibrating 8 pumps, 8 motors and tuning 8 speed control algorithms to work together in perfect sync to achieve uniform startup, steady state and shutdown performance across the entire system. As with the last cluster test, to the best of our knowledge, this is the first time such a test has been performed in India with semi cryogenic engines.
We are extremely grateful to have the opportunity to be building world class, original space technology from India, for the world with the support of @iitmadras @isro and @INSPACeIND
From here on, the addition of engines to our clusters will likely increase non-linearly. #agnibaan #rocketenginecluster #electricpumpfedengines #agnilet #singlepieceengine #3dprinting #rocketenginetest #additivemanufacturing #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworld
@srinathr155 @moin_spm @satchakra_iitm
@iitmadras @iitmrp @IITMIC @tdbgoi @IndiaDST @ANRFIndia @TIDCO_1965 @startupindia @TheStartupTN @Guidance_TN @startup_mission @SIPCOTTNThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Repeatability in performance is what differentiates a working prototype from a working subsystem. Humbled to share a video of the repeatability test performed on our single piece, fully 3d printed, semicryogenic, 1 meter long Agnite engine.
Seeing the pressure and temperature plots from the previous test match the same plots from the next test gives amazing confidence to proceed towards stage level testing.
With steady progress on clustering electric motor driven engines, single piece engines at larger thrust levels and rapid additive manufacturing, we are getting ever so close to flying these engines on our operational launch vehicles. Thanks to @isro & @INSPACeIND for their constant support and guidance. Of course, none of this is even possible without the help of the entire @iitmadras ecosystem.
@iitmadras @iitmrp @IITMIC @ANRFIndia @IndiaDST @tdbgoi @TIDCO_1965 @Guidance_TN @StartupTN @startupindia @startup_mission
@srinathr155 @moin_spm @satchakra_iitm
#agnibaan #agnite #singlepiecerocketengine #3dprintedrocketengines #madeinindiafortheworld #designedinindiafortheworld #agnikulThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the successful firing of our single piece Agnite engine. Agnite engines power Agnibaanās booster stage. These engine chambers are a full meter long, fully 3d printed as a single piece of hardware and made of Inconel.Ā Agnite engines are driven by pumps that are controlled and operatedĀ by electric motors.
Thanks to @isro & @INSPACeIND for their constant support and to @iitmadras for being our home turf from which this kind of technology is built.
This Agnite engine was printed, depowdered and post processed in the same machines that we inaugurated as a part of our Large Format Additive Metal Manufacturing facility (LFAMM) towards the end ofĀ last year. This milestone is also significant for us because it completes one end-to-end cycle of design, manufacturing, assemblyĀ and testing of our larger engines, in-house.
Amazing work by the team in pulling off a few world firsts here.
- worldās first single piece engine of this size being fired
- worldās largest inconel only engine
- worldās only electric motor fed, semi cryo engine of this size
and the list continues.
However, this is not a race to be the world's first, it is a race to be the world's best & to be the world's most useful technology for launching small satellites to orbit.
This comes right after firing a cluster of 3 semi cryogenic engines that happened last month. Honoured to be working with a team that truly believes in building world class, original space technology for the world, from India.
@srinathr155 @moin_spm @satchakra_iitm @iitmadras @iitmrp @IITMIC @tdbgoi @IndiaDST @ANRFIndia @TIDCO_1965 @startupindia @TheStartupTN @Guidance_TN @startup_mission @isro @INSPACeIND
#agnibaan #agnite #singlepiecerocketengine #3dprintedrocketengines #madeinindiafortheworld #designedinindiafortheworld #agnikulThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled and honoured to have received an equity investment from the TN State Govt. through @TIDCO_1965. This is a strong sign that the TN state Govt. is fully on-board for supporting original technology developed in this ecosystem. Thanks to the visionary leadership of our Honāble CM @mkstalin and Honāble Industries Minister @TRBRajaa - we are seeing investments in the deep tech sector happening directly through the Government. @StartupTN @Guidance_TN - thank you for your guidance and mentorship in this process.
@iitmadras @iitmrp @IITMIC @isro @INSPACeIND @tdbgoi @IndiaDST @ANRFIndia @startupindia @startup_mission
@srinathr155 @moin_spm @satchakra_iitm -
AgniKul Cosmos
@AgnikulCosmos
Thank you so much for your guidance and support since our very first year as a company. It is this kind of mentorship that allows us to dream big from India.
Dr. S Somanath
@SomanathSpeak
A significant achievement by Agnikul to have successful firing of Semicryo engine cluster. Shows the technical maturity and innovation that will transform liquid engine technology from India.
Congratulations Agnikul ššš -
AgniKul Cosmos
@AgnikulCosmos
Humbled to share that we successfully test fired 3 semi-cryogenic rocket engines simultaneously, as a cluster. All the 3 engines are 3d printed as single pieces of hardware - designed and manufactured in-house at AgniKul Cosmos Rocket Factory - 1. As with all our propulsion systems, these 3 engines are also powered by electric motor driven pumps.
This test involved calibrating 6 pumps, 6 motors and tuning 6 speed control algorithms to work together in perfect sync to achieve uniform startup, steady state and shutdown performance across the entire system.
To the best of our knowledge, this is the first time such a test has been performed in India with semi cryogenic engines. We are extremely grateful to have the opportunity to be building world class, original space technology from India, for the world with the support of @isro and @INSPACeIND
#agnibaan #rocketenginecluster #electricpumpfedengines #agnilet #singlepieceengine #3dprinting #rocketenginetest #additivemanufacturing #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworld
@srinathr155 @moin_spm @satchakra_iitm
@iitmadras @iitmrp @IITMIC @tdbgoi @IndiaDST @ANRFIndia @TIDCO_1965 @startupindia @TheStartupTN @Guidance_TN @startup_missionThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled and honoured to have had the opportunity to host @DrJitendraSingh - Honourable Minister of State, Science and Technology, Earth Sciences at AgniKul Cosmos Rocket Factory - 1. We spent time showing him how we make #designedinindia and #madeinindia single piece 3d printed rocket engines and also spoke about our upcoming Mission-02, reusability and more!
#profashokjhunjhunwala @NatMalupillai #reemasaha
@srinathr155 @moin_spm #satyachakravarthy
@iitmadras @iitmrp @IITMIC @ANRFIndia @IndiaDST @startupindia @tdbgoi @TIDCO_1965 @Guidance_TN @TheStartupTN @startup_mission -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce our partnership with @neevcloud_IN - a unique customer for our patented rocket upper stage.
In 2019, a conversation about using the Stefan Boltzmann āto-the-power-of-4ā equation to dissipate heat from a data center module was discussed with them.
6 years later, now, going to space for energy conversion and energy dissipation is being spoken about a lot by everyone. Here is our way of doing it - using our extendable #agnibaan upper stage as a platform to host a space data center module in orbit.
As the world wakes up to exploring space for energy generation and dissipation, here is a #madeinindiafortheworld attempt to make that commercial with our existing upper stage technology.
New customers are always good. However, new class of customers is absolutely great. Thank you @neevcloud_IN for trusting us to host your space data center module.
@isro @INSPACeIND - none of this is possible without your constant support. Thank you, as always.
@srinathr155 @moin_spm #satyachakravarthy @iitmadras @iitmrp @IITMIC @startupindia @startup_mission @TIDCO_1965 @Guidance_TN @IndiaDST @ANRFIndia @tdbgoi @TheStartupTN -
AgniKul Cosmos reposted
IIT Madras
@iitmadras
@iitmadras is delighted and proud to share that our Director, Prof. V. Kamakoti, has been selected for the prestigious Padma Shri Awards 2026 by the Government of India.
A distinguished academician and eminent researcher, Prof. Kamakoti has made transformative contributions in the fields of computer science, systems engineering and interdisciplinary research. His visionary leadership has further strengthened IIT Madrasās commitment to cutting-edge research, technological innovation, a thriving startup ecosystem and inclusive institutional development.
The Padma Shri Awards recognise his outstanding service and exemplary leadership in the field of Science and Technology, which stands as a testament to his enduring impact in academia.
The entire IIT Madras community takes pride in this well-deserved national recognition and extends its heartfelt congratulations, wishing him continued success in service of the nation.
@EduMinOfIndia
#padmaawards2026 #padmashri2026
#padmaawardsThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Happy 2026! As 2025 came to a close, we stood together as a team and felt what the Mission - 02 launch countdown would be like while watching the real-time, full-chain avionics run-through. Here are some glimpses from the run-through.
@isro @INSPACeIND @IndiaDST @tdbgoi @IITMIC @iitmadras @iitm_respark @TIDCO_1965 @startup_mission @Guidance_TN @ANRFIndia
@srinathr155 @moin_spm @satchakra_iitm
#newyear2026 #agnibaan #rocketlaunch #agnilet #singlepieceengine #3dprinting #additivemanufacturing #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworldThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos reposted
Narendra Modi
@narendramodi
A significant stride in Indiaās space sectorā¦
The successful LVM3-M6 launch, placing the heaviest satellite ever launched from Indian soil, the spacecraft of USA, BlueBird Block-2, into its intended orbit, marks a proud milestone in Indiaās space journey.
It strengthens Indiaās heavy-lift launch capability and reinforces our growing role in the global commercial launch market.
This is also reflective of our efforts towards an Aatmanirbhar Bharat. Congratulations to our hardworking space scientists and engineers.
India continues to soar higher in the world of space!
@isro -
AgniKul Cosmos reposted
Shradha Sharma
@SharmaShradha
Where are India's DeepTech Startups?
This is now emerging as a trend. I am increasingly coming across founders who are not optimising for attention - they are optimising for outcomes.
In just six months, weāve featured 100+ DeepTech startups across Clean Energy, AI, SpaceTech, Agritech, HealthTech, and Assistive Innovation from 50+ cities and towns across India. From Tier-II and Tier-III regions, industrial belts, university labs, and manufacturing clusters.
Here is our list of 50 Bharat Ke Innovators to watch out for in 2026!
yourstory.com/category/bharat-ke-innovators
Thank you to my @YourStoryCo team for helping me put this together! -
AgniKul Cosmos reposted
Dr. S Somanath
@SomanathSpeak
Making a metal 3D printed rocket engine which is tested to full functionality is a huge technological step in aerospace. There are many challenges of intricate passages, surface finish, cleanliness, defects characterisation, NDT, residual stress, distortion⦠in metal AM, not to mention the thermo-structural environments, it is subjected to. Congratulations to Agnikul for your progress. Looking forward to scaling up.
-
AgniKul Cosmos
@AgnikulCosmos
Thank you, Sir for being an inspiration for all of us and for being a supporter since our very early days.
Dr. S Somanath
@SomanathSpeak
Making a metal 3D printed rocket engine which is tested to full functionality is a huge technological step in aerospace. There are many challenges of intricate passages, surface finish, cleanliness, defects characterisation, NDT, residual stress, distortion⦠in metal AM, not to mention the thermo-structural environments, it is subjected to. Congratulations to Agnikul for your progress. Looking forward to scaling up.
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to share this dual-engine firing video, where both of our in-house electric motorādriven, pump-fed, single-piece engines reached thermal steady state and demonstrated uniform system performance over 49 seconds. Deeply grateful to have had the opportunity to advance electric motor-driven, pump-fed 3D printed rocket engines in India through our homegrown technologies with ISRO & IN-SPACe support.
All the four pumps used in this firing are special because
1. They are driven by fully independent electric motors
2. Majority of the pump components are 3D-printed in-house
3. The speed of the pump is controlled by drives & software fully developed in-house
@isro @INSPACeIND @IndiaDST @tdbgoi @IITMIC @iitmadras @iitm_respark @TIDCO_1965 @startup_mission @Guidance_TN @ANRFIndia
@srinathr155 @moin_spm @satchakra_iitm
#agnibaan #rocketengine #electricpumpfedengines #agnilet #singlepieceengine #3dprinting #rocketenginetest #additivemanufacturing #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworldThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce that we have raised $17M in our latest funding round ā supported by amazing partners including Advenza Global Limited, HDFC Bank, Pratithi Investments, Artha Venture Fund, and several others.
Rewinding a bit - the response to our controlled ascent test launch has been both energising and overwhelming. Multiple customers have expressed interest in riding with us to space. This momentum has inspired us to move faster and challenge the conventional boundaries of launch technology.
As the global launch market rapidly evolves, with the support from ever inspiring @isro & the always enabling @INSPACeIND , we are committed to building a future where no part of our rockets are wasted. Reusability will no longer be a distant goal ā but an objective in our very next mission.
With this funding, we will now start our expansion at the recently allocated land near the upcoming Kulasekarapatnam launchpad. Thanks to the continued trust of the Tamil Nadu State Government.
We have come a long way but there is a lot more to be done to democratize space access. Getting to orbital velocity looks more attainable than ever with this new Dollar DeltaV infusion!
@srinathr155 | @moin_spm | #satyachakravarthy
@iitmadras | @iitmrp | @IITMIC | @startup_mission | @IndiaDST | #tdbindia | @ANRFIndia | @Guidance_TN | @TN_SIPCOT | @TIDCO_1965
#agnibaan #agnikul #agnikulcosmos #startupindia #makeinindia
#madeinindiafortheworld #resuability #newspace #kulasekarapatnam #deeptech #rockets -
AgniKul Cosmos reposted
Artha Group
@GroupArtha
Democratising Space For The World.Ā
Ā
At Campdenās 27th European Family Office Forum, we had the privilege of spotlighting @AgnikulCosmos!
Ā
From rethinking access to space to framing space-tech as a serious asset class for long-term capital, the session sparked rich conversations with family offices and investors in London. Ā
Ā
The next chapter of space is being written now! -
AgniKul Cosmos
@AgnikulCosmos
Humbled to share the simultaneous firing of two of our electric pump-fed semi cryo engines, controlled by our in-house engine computer software. Since these pumps are driven by electric motors there is increased level of control available to balance the thrusts across the engines compared to conventional thrust balancing techniques
@isro @INSPACeIND @IndiaDST @tdbgoi @IITMIC @iitmadras @iitm_respark @TIDCO_1965 @startup_mission @Guidance_TN @ANRFIndia
@srinathr155 @moin_spm @satchakra_iitm
#agnibaan #rocketengine #electricpumpfedengines #agnilet #singlepieceengine #3dprinting #rocketenginetest #additivemanufacturing #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworldThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have had the opportunity at @IAC2025sydney to unveil reuse of our launch vehicles as a strategy going forward for our missions. This is backed by patents we have recently received in the US, Europe and India and further strengthens our commitment to building original space tech solutions in India for the world. This is also our commitment to "Sustainable Space: Resilient Earth" which is #iac2025's theme, where we aim to ensure that no part of our rockets are fully expended or left behind. Thanks to @isro , Department of Space (DoS), @INSPACeIND for showing willingness to allow us to attempt this both from a technology and a policy standpoint.
Thanks to the relentless support from @IndiaDST @tdbgoi @iitmadras @iitm_respark @IITMIC @TIDCO_1965 @startup_mission @Guidance_TN as always.
@srinathr155 @moin_spm @satchakra_iitm @AgnikulCosmos
#agnikul #agnikulcosmos #agnibaan #3dprinting #additivemanufacturing #rocket #rocketengine #makeinindia #madeinindiafortheworld #iac2025 -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have had the honour of hosting Dr. V. Narayanan, Secretary, Department of Space & Chairman of ISRO, and Prof. V. Kamakoti, Director of IIT Madras, at our facilities today, along with Dr. Tamizh Valavan, Principal Commissioner of Customs and Indirect Taxes and several other distinguished guests.
They inaugurated our new end-to-end Large Format Additive Metal Manufacturing (LFAMM) Unit ā a step forward towards an Atmanirbhar Bharat in space technology. This facility houses:
ā Indiaās largest 3D metal printer for large space-tech systems
ā An indigenous de-powdering machine, designed and built in-house for repeatable post processing
⦠and a lot more.
We see this as our way of contributing to nation-building through original design and manufacturing with a focus on quality. We are deeply grateful to our collaborators and well-wishers ā @isro, Department of Space (DoS), @INSPACeIND; @IndiaDST @tdbgoi; @iitmadras, @iitm_respark, and @IITMIC; @TIDCO_1965, @startup_mission and @Guidance_TN
Thanks to our partner @EOS3DPrinting for their support.
@srinathr155, @moin_spm, @satchakra_iitm, @AgnikulCosmos
#agnikul #agnikulcosmos #agnibaan #3dprinting #additivemanufacturing #rocket #rocketengine #makeinindia #madeinindiafortheworld -
AgniKul Cosmos
@AgnikulCosmos
Humbled to be the operating partner for Tamilnadu Advance Manufacturing Centre of Excellence (TAMCOE) - an amazing, useful and cutting edge facility designed and conceived to take additive manufacturing in our very neighbourhood to another level. We find this as a way to give back to the community and contribute through the additive manufacturing patents we have developed from scratch while also enabling original designs to be created and manufactured in Tamil Nadu.
More design led & original manufacturing coming soon!
@srinathr155 @moin_spm @iitmrp @IITMIC @startupindia @TIDCO_1965 @iitmadras @IndiaDST @Guidance_TN @tdbgoi @TN_SIPCOT
TIDCO
@TIDCO_1965
š Exciting Update from TIDCO's CoE - #tamcoe!
We are pleased to announce that AgniKul Cosmos, Indiaās pioneering spacetech startup, has joined as the Operating Partner of the Tamilnadu Advance Manufacturing Centre of Excellence (TAMCOE).
With expertise in advanced #manufacturing, 3D printing of rocket engines, and translating frontier technologies into scalable applications, #agnikul will now extend its capabilities to support aerospace, industry, and the public ecosystem through TAMCOE.
š¤ This collaboration marks a major step in strengthening #tamilnaduās leadership in advanced manufacturing and innovation, enabling:
āŖWorld-class R&D support
āŖIndustry-focused solutions
āŖSkilling and capacity-building initiatives
Together, we are powering the future of manufacturing in India.
#venturecatalyst #tidco #investintn #innovation #aerospace #makeinindia -
AgniKul Cosmos reposted
Nithin Kamath
@Nithin0dha
Happy National Space Day! š®š³
Proud of two @Rainmatterin-backed teams pushing Indiaās space frontiers:
š @AgnikulCosmos ā Fired Indiaās 1st electric motor-driven semi-cryogenic engine, enabling ultra-precise rocket navigation.
š° @GalaxEye ā Building one of Indiaās largest private satellites (launch Feb ā26) for all-weather, day/night earth imagery, aiding defence & agriculture.
Cheering for all our space startups! šāØ -
AgniKul Cosmos reposted
DSTIndia
@IndiaDST
On #nationalspaceday, @AgnikulCosmos reflects Indiaās innovative spiritāfrom @iitmadras to the worldās 1st flight with a single-piece 3D-printed engine.
Powered by #yuvashakti & #atmanirbharbharat & backed by @IndiaDST, @tdbgoi &I-STAC, it is making space access rapid& reliable.This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Happy Independence Day. Grateful and humbled to be having the opportunity to build original and world class space technology from this great nation. #independenceday #happyindependenceday2025 #happyindependenceday #aatmanirbharbharat
-
AgniKul Cosmos
@AgnikulCosmos
Two updates - A) Humbled to introduce the worldās biggest single-piece 3D-printed inconel engine, a global first in both scale & complexity. It is an meter long engine entirely printed as a single component in one shot. (No welds, no joints, no fasteners from fuel entry to plume exit.) This milestone marks a breakthrough in additive manufacturing at this scale & comes as a major extension of our earlier accomplishment of making & flying the world's first single piece engine. Compared to our earlier upper stage engines, these are longer, more complex and massive.
B) We have been granted a patent in the US for the design & manufacturing of single-piece rocket engines. Means something to have a completely Indian origin design patented in the US - a nation that has built some of the most complex engines in this industry. Thank you to everyone who made this achievement possible including the amazing support from @isro , @INSPACeIND , @tdbgoi & @IndiaDST
(Note: the innovation is in making an entire engine as a single piece of hardware & in automating the making of a rocket engine, not just "3d printing")
#worldsbiggestsinglepieceinconelengine #patent #singlepieceengine #additivemanufacturing #rocketengine #3dprinting #spacetech #aatmanirbharbharat #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworld -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have the opportunity to contribute to the local ecosystem in Tamil Nadu and for India as a whole by building real & original space technology. Thanks to @Guidance_TN & Govt. of TN for all the support. After a few years of working in this sector it is very clear to us that the only way ahead in space technology is by innovating. We are blessed with an excellent space agency in ISRO and it is our responsibility to use what has been extended to the system as a whole here to build world class space tech hardware. #bullishontn #investintn #jobsfortn #productnationtn #tnrising
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to host Shri. Ajit Doval, National Security Advisor of India, at Rocket Factory ā 1. š
It was a great opportunity to walk him through our facility and demonstrate our patented additive manufacturing capabilities. Truly honoured to play a part in shaping the nationās technological future.
@satchakra_iitm @srinathr155 @moin_spm @IITMIC @iitmadras @iitm_respark @isro @INSPACeIND
#techforindia #leadershipvisit #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworld -
AgniKul Cosmos reposted
Aus Consulate Chennai
@AusCGChennai
Her Excellency the Honourable Frances Adamson AC Governor of South Australia visited š®š³ aerospace startup @AgnikulCosmos at @iitmrp Chennai and was briefed on their satellite and rocket technology. š South Australia is a major centre for space tech & home of the @AusSpaceAgency
-
AgniKul Cosmos
@AgnikulCosmos
Exactly one year ago, on this very day, May 30, 2024, we flew a fully controlled launch vehicle. It was Mission 01 of Agnibaan SOrTeD.
Today, we want to take a moment to sincerely thank everyone - the Dept. Of Space, @INSPACeIND , various @isro centers, customers, investors, advisors from ISRO, @iitmadras , @iitm_respark , @IITMIC, Dept. of Science and Technology @IndiaDST, TDB @tdbgoi, KSUM @startup_mission , Govt. of Tamil Nadu @Guidance_TN , Govt. of Andhra Pradesh, our vendors, suppliers and other mentors - that made this possible & remind ourselves that this is just one of the many missions we will accomplish.
Here is a video that captures snippets from the launch day, showing moments of teamwork, hustle, triumph, and the post launch event we had that day.
(A previous rough cut about the launch is here www.youtube.com/watch?v=3J2Lnck_vgU )
About Agnibaan SubOrbital Technology Demonstrator (SOrTeD) :
Controlled rockets are hard - our in-house autopilot had to work along with our aerodynamic models, and our engine, allowing for a lift off from our launchpad while seamlessly executing 1000s of lines of in-house code running on our flight and engine computers.
During this flight, SOrTeD achieved several important firsts:
1. World's First flight powered by a single-piece 3D printed engine
2. Indiaās first-ever semi-cryogenic engine launch
3. First ever launch from a private launchpad in India
4. First launch from India, driven by computers running on Linux
5. First launch from India using an Ethernet-based architecture for connecting flight computers within the vehicle
6. First flight fueled by aviation-grade jet fuel and industrial-grade Liquid oxygen from India.
Above all, this mission will always be special for us because ā it flew with technology that was built in India, for the world.
To everyone who has cheered us on, stood beside us, or simply believed ā once again a huge thank you.
You continue to fuel whatās next.š
Also, you can now shop from Cosmos store & enjoy 10% OFF on all orders by using code: 30MAY2024. Enjoy a free gift on every purchase!
Shop now: shop.agnikul.in
@satchakra_iitm @srinathr155 @moin_spm
#agnibaansorted #sorted #mission01 #oneyearofsorted #agnibaan #singlepieceengine #additivemanufacturing #spacetech #aatmanirbharbharat #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworldThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the successful firing of Indiaās first electric motor-driven semi-cryogenic engine (video below).
This video shows the engine being throttled across a wide range of thrusts by varying the speed of the electric motor. Electric motor-driven throttling allows for higher accuracy and rapid response - important features for handling complex trajectories. Also, regarding flight readiness, this test is a key milestone towards firing a cluster of engines together.
Additionally, this system continues to use our signature single-piece engine that Agnikul has always used. Along with the patented engine, many subsystems of the pump were also 3D-printed and assembled at our AS9100D certified facility - Rocket Factory - 1. The motor drives and associated control software were also fully designed and developed in-house.
@iitmadras @iitmrp @IITMIC @srinathr155 @moin_spm @satchakra_iitm
#agnibaan #rocketengine #electricmotordrivenrocketengine #singlepieceengine #3dprinting #rocketenginetest #additivemanufacturing #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworldThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have had the chance to host the French Delegation as part of #frenchspacedays India 2025 š«š·š
It was a pleasure to show them around our test rigs and give a peek into how we do additive manufacturing at Rocket Factory - 1. Thanks to @franceinindia @businessfrance @GifasOfficiel and @cnes_france for the visit!
#frenchspacedays #internationalcollaboration #spacetech #agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworld -
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Lucky to have had the chance to share stage with someone who has been in Low Earth Orbit today. People like this are the reason why rockets are fun despite the daily churn of plumbing leaks & software bugs. Dr. Mike Massiminoās words from 28:30 are worth listening to over & over.
NXT
@nxt_conclave
Join us for an exclusive discussion featuring NASA astronaut Dr. Mike Massimino and top Indian space startup leadersāTanveer Ahmed (Dhruva Space), Srinath Ravichandran (Agnikul Cosmos), and Rohan Ganapathy (Bellatrix Aerospace). Moderated by Divya Chopra (NewsX), the session explores Indiaās rapidly growing private space sector, astronaut experiences, and the vision for interplanetary exploration. Witness insights on cutting-edge space tech, collaboration with ISRO, and India's role in the global space economy.
#nxtconclave #thefutureisnxt #nxtconclave2025 #seetheworldthroughnxt #newsxworld #nxtworld
@Kartiksharmamp @MirAhmedTanveer @srinathr155
WATCH LIVE: www.youtube.com/watch?v=HPPHZCKmvIwThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have had the opportunity to host you, Sir. Thank you for taking the time.
Dr. T R B Rajaa
@TRBRajaa
Sunday evening well spent at the IIT Madras Thaiyur campus ā„ļø
It was an absolute privilege to meet the incredible teams behind @AgnikulCosmos, @ePlaneCompany, and @Avishkar_loop Tutr, three cutting-edge startups which are a badge of honour for #india and especially #tamilnadu !
Spending time with Prof. Satyanarayanan Chakravarthy, one among the visionaries driving these remarkable ventures, was truly energising.
These startups showcase Tamil Naduās unparalleled position as a knowledge-driven economy, powered by homegrown talent and technology. Their pioneering work in space tech, mobility and hyperloop innovation not only reflects Tamil Naduās capabilities but also aligns perfectly with our state's ambition of achieving a USD 1 trillion economy !
Exciting times ahead as we continue to find ways to create more synergies and opportunities to collaborate!
#investintn #jobsfortn -
AgniKul Cosmos
@AgnikulCosmos
Happy new year!
Humbled to announce that Agnikul is officially AS9100D certified. A big thank you to everyone who played a part in reaching this milestone. Hereās to reaching new heights in Product Quality in 2025!
Also, to celebrate the New Year, enjoy 7% off on all products on Cosmos store with No Minimum Order Value.
shop.agnikul.in
Use code: AGNIKUL2025
New year offer valid till: 5th Jan, 2025, 11:59pm -
AgniKul Cosmos
@AgnikulCosmos
Humbled by this support and encouragement from @tdbgoi - thank you šš»
Technology Development Board
@tdbgoi
Empowering Indiaās Space Dreams!
@tdbgoi supports @AgnikulCosmos in revolutionizing Indiaās space ecosystem with #agnibaan highly customizable two-stage launch vehicle capable of delivering payloads up to 300 kg to 700 km orbits.
Read More- pib.gov.in/PressReleasePage.aspx?PRID=2085221 -
AgniKul Cosmos
@AgnikulCosmos
Itās an honour to be working with @iitmadras - thank you @EduMinOfIndia for the mention.
Ministry of Education
@EduMinOfIndia
#heimilestones
IIT Madras, one of the premier institutions in the country, continues to excel nationally and internationally in academics, engineering, and technology.
š Global Expansion
@iitmadras has become the first Indian Higher Education Institution to establish an offshore campus in Zanzibar, Tanzania, extending its global footprint.
šØāšPioneering Research with NASA
In collaboration with @NASA, IIT Madras is conducting groundbreaking research aboard the International Space Station. The focus is on safeguarding astronaut health by studying multi-drug-resistant pathogens in space.
š Revolutionising Space Tech
Agnikul Cosmos, a startup incubated at IIT Madras, recently launched Agnibaan, the worldās first rocket with a 3D-printed single-piece engine. This mission showcases India's technological prowess, gathers vital data, and ensures the optimal performance of its launch vehicle.
š¤¾āāļø Advances in Sports Healthcare:
Researchers at IIT Madras have developed innovative on-field diagnostic tools for injury detection, making significant strides in sports healthcare.
To know more, visit www.iitm.ac.in
#innovateeducateinspire #heisuccessstories -
AgniKul Cosmos reposted
Crafting Bharat
@CraftingBharat
Get a sneak peek into a candid conversation with Srinath Ravichandran, Co-Founder of @AgnikulCosmos, as he discusses the emotional journey during India's first semi-cryo flights and achieving milestones in Episode 1.
Watch the full episode at: www.youtube.com/watch?v=d0nUiYljPqE
Stay tuned for updates on the next episode!
@Infinithish @srinathr155 @vccircle @HTSmartcast @FeverFMOfficial @SpecialeInvest
#podcast #podcasts #podcasting #businesspodcast #entreprenuerpodcast #entreprenuer #startup #startupbusiness #businesslife #startuppodcast #indianstartup #businesspodcast #businessadvice #spacestartup #spaceinnovation #space -
AgniKul Cosmos
@AgnikulCosmos
Wishing you all a bright and prosperous Diwali from Agnikul!Ā
#happydiwali #diwali #festivaloflights #agnikul #agnikulcosmos #startupindia #makeinindia #deepavali2024 -
AgniKul Cosmos reposted
UKinChennai š¬š§š®š³
@ukinchennai
On #worldcitiesday, Uma from @AgnikulCosmos shares insights on techās role in building better urban futures! ššļø
#urbanoctober #worldcitiesday -
AgniKul Cosmos
@AgnikulCosmos
Discover how Agnikul is bringing space within everyone's reach by launching anywhere, anytime, affordably! This video series is your playbook to know how we are setting benchmarks and counting down to launch!
www.youtube.com/watch?v=EIsEtduO0Ow
#mission01 #agnibaansorted #sorted #agnibaan #semicryogenic #privatelaunchpad #indiafirstsemicryolaunch #notasoundingrocket #rocketlaunch #makeinindia #aatmanirbharbharat #madeinindiafortheworld #startupindia #additivemanufacturing #launchanywhereanytimeaffordably #agnikullaunchanywhereanytimeaffordably
AgniKul Cosmos
@AgnikulCosmos
Breaking boundaries in satellite launches. Meet Dhanush, our mobile launchpad, designed to launch Agnibaan from anywhere on the face of this planet. With safety and regulatory compliance at its core, Dhanush is paving the way for a new era in space exploration by Maximizing Mobility!
youtu.be/J5oD5wHtkC4
#mission01 #agnibaansorted #sorted #agnibaan #semicryogenic #privatelaunchpad #indiafirstsemicryolaunch #notasoundingrocket #rocketlaunch #makeinindia #aatmanirbharbharat #madeinindiafortheworld #startupindia #additivemanufacturing #launchanywhereanytimeaffordably #agnikullaunchanywhereanytimeaffordably
AgniKul Cosmos
@AgnikulCosmos
The choice is YOURS!
We have chosen a customer centric approach by allowing you to customise and choose a launch location. Dhanush, our mobile launchpad system will allow you to launch from any preferred launch location, making it the most convenient and economical for you to achieve the required Delta-V!
youtu.be/KFlPFOFp1bQ
#mission01 #agnibaansorted #sorted #agnibaan #semicryogenic #privatelaunchpad #indiafirstsemicryolaunch #notasoundingrocket #rocketlaunch #makeinindia #aatmanirbharbharat #madeinindiafortheworld #startupindia #additivemanufacturing #launchanywhereanytimeaffordably #agnikullaunchanywhereanytimeaffordably
AgniKul Cosmos
@AgnikulCosmos
It's not just some fuel, it's the future.
Our commitment to accessibility and innovation drives every decision we make. Using cutting edge liquid propulsion technology we're bringing space within everyone's reach.
youtu.be/WUwHkGjQuHs
#mission01 #agnibaansorted #sorted #agnibaan #semicryogenic #privatelaunchpad #indiafirstsemicryolaunch #notasoundingrocket #rocketlaunch #makeinindia #aatmanirbharbharat #madeinindiafortheworld #startupindia #additivemanufacturing #launchanywhereanytimeaffordably #agnikullaunchanywhereanytimeaffordably
AgniKul Cosmos
@AgnikulCosmos
(Continuing this through our World Space Week) Imagine rocket building being as easy as assembling LEGO blocks - that's the future we're creating at Agnikul! Tune in as we explore the concept of plug and play in our 21st century launch vehicles.
youtu.be/QL13zVU5Qdw
#agnikul #mission01 #agnibaansorted #sorted #agnibaan #firstlaunch #agnikullaunch #3dprinted #plug&Play #privatelaunchpad #india #first #spacetech #notasoundingrocket #isro #rocketlaunch #launchanywhereanytimeaffordably #modulardesign -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have come across amazing positive energy & excitement at the 8th Bengaluru Space Expo 2024 at BIEC. Thank you for all the support. Inspired by this, we have put together something special for all space enthusiasts. Launching - A Cosmos Store - a place to get some exclusive merch for you, to take home a little piece of our passion.
Explore and shop now at: shop.agnikul.in
#agnikul #agnikulcosmos #startupindia #makeinindia #madeinindiafortheworld #cosmosstore #acosmosstore #mission01 #agnibaansorted #passionineverypiece #fueledbypassion -
AgniKul Cosmos
@AgnikulCosmos
This is a very special day for everyone in Indian space tech. The support from the Government @isro @INSPACeIND , investors and vendors is unparalleled now, unlike ever before, and hence it is an amazing time to be building space technology in India. Thanks to @Nithin0dha @Rainmatterin for being early believers in Indian space tech.
Nithin Kamath
@Nithin0dha
Today is the first National Space Day š®š³
It's a matter of pride that we have many amazing homegrown space startups, like @AgnikulCosmos and @GalaxEye, both from the @Rainmatterin portfolio.
Agnikul recently tested the worldās first 3D-printed rocket engine and is aiming to launch a satellite by 2025.
Considering the cutting-edge research and technology needed, spacetech startups, more than other startups, need patient capital. So here's hoping we'll have more homegrown spacetech startups that will make us proud. šŖš®š³ -
AgniKul Cosmos reposted
UKinChennai š¬š§š®š³
@ukinchennai
5/n š§µ The space-tech industry is bustling with a lot of young people and great opportunities. The average age of a person in space startup in 25-35 years and thatās a really exciting place to be. Uma Maheshwari from @AgnikulCosmos
-
AgniKul Cosmos
@AgnikulCosmos
We are excited to have this recognition for one of our best leaders - Saraniya, Vehicle Director of Agnibaan SOrTeD - through @CNBCTV18News in its #futurefemaleforward series. @ShereenBhan - appreciate the opportunity to share our story. Flying a controlled ascent vehicle is an arduous task and bringing all pieces of it together, flying it with a new engine, from a new launchpad was a test of resilience for the entire team.
CNBC-TV18
@CNBCTV18News
#futurefemaleforward | Journey of Saranya P..
From IIT Madras to Vehicle Director of private rocket mission at @AgnikulCosmos @ShereenBhan@iitdelhi @HSBC_IN@hcltech @ITCCorpCom @FedExIndia @ficci_india
Watch the full episode here: youtube.com/live/TyEqcN75SGAThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
A heartfelt thank you from the entire Agnikul team to have Saraniya, Vehicle Director of Agnibaan SOrTeD and Umamaheswari, Project Director of Mission-01 of Agnibaan SOrTeD featured in the coffee table book (Sudar) released by @the_hindu in association with @Guidance_TN in Tamil Nadu Womenās Summit 2024. @sang1983 - thank you for moderating a session that brought out their journeys and the power of resilience and endurance in getting a new type of rocket launched.
It was a special and humbling moment for all of us when the session received standing ovation from the audience šš»@the_hindu @iitmrp @iitmadras @IITMIC @startup_mission
The Hindu
@the_hindu
#sponsored | The Hindu is proud to present Tamil Nadu Womenās Summit 2024, in association with Guidance Tamil Nadu (@Guidance_TN).
Experts will participate in sessions, covering topics such as women in manufacturing, STEM (science, technology, engineering, and mathematics), global capability centres, and space.
The TN Womenās Summit will feature a total of eight sessions throughout the day, with sessions being curated & moderated by the editorial team of The Hindu.
@KBRincorporated,@MyIndianBank,@vfsglobal, @PortofChennai,@UnitedIndiaInsu, @HospitalsApollo, @cmrlofficial,@NipponIndia, @ITCMangaldeep,@FollowCII, @CREDAINational
To view the summit: newsth.live/THWS2024LS
#thwomenssummit2024 -
AgniKul Cosmos reposted
nasscom member connect
@nasscom_member_
#innovationstories
@AgnikulCosmos is transforming the Indian space-tech scene with their unique vision. They recently launched India's first semi-cryo engine-powered space vehicle from India's first and only private launchpad!
Learn how the team at Agnikul Cosmos overcame various obstacles and achieved remarkable milestones in our interview with Dinesh Parthasarathy, Executive Vice President of Agnikul Cosmos.
Watch Now -Ā youtu.be/_dxXqd7RnyU
#spacetech #spaceinnovation #spacelaunch #spaceengineering #spaceexploration #spacescience #satellite #aeronautics #spaceindustry #techlandscape #nasscom #agnikulcosmos -
AgniKul Cosmos reposted
Forbes India
@ForbesIndia
.@AgnikulCosmos recently launched its first technology demonstrator rocket. Now, co-founders @srinathr155 and @moin_spm are a step closer to their dream of building a private space exploration company from India
Story by @ArakaliHari
www.forbesindia.com/article/innovation/inside-agnikul-the⦠-
AgniKul Cosmos
@AgnikulCosmos
Humbled to have our founders @srinathr155 and @moin_spm featured on the cover of @ForbesIndia representing the entire Agnikul team. Thank you, Forbes, for the recognition!
Forbes India
@ForbesIndia
2024 Deep Tech Special: From @AgnikulCosmos' launch of India's first 3D printed rocket engine (on the cover) to startups and entrepreneurs that make up India's deep tech sector, and what they need to succeed. Buy your Digital Copy today: www.forbesindia.com/magazine/
-
AgniKul Cosmos reposted
Forbes India
@ForbesIndia
2024 Deep Tech Special: From @AgnikulCosmos' launch of India's first 3D printed rocket engine (on the cover) to startups and entrepreneurs that make up India's deep tech sector, and what they need to succeed. Buy your Digital Copy today: www.forbesindia.com/magazine/
-
AgniKul Cosmos
@AgnikulCosmos
Thanks to @iitm_respark ā We all loved every bit of this amazing evening. Such a wonderful recognition.
IIT Madras Research Park
@iitm_respark
From incubation at IITM Incubation Cell to building Agnibaan's engine at their Rocket 1 factory at IITM Research Park, here's to many more milestones ahead!
#agnikulsuccess #iitmincubationcell #innovation #spacetech #futureforward #agnibaansorted -
AgniKul Cosmos reposted
IIT Madras Research Park
@iitm_respark
šOn May 30th, India witnessed @AgnikulCosmos's launch of Agnibaan SOrTeD, powered by the worldās first semi-cryogenic, single-piece, 3D-printed engine.
We came together at "Lift-off" to honor those instrumental to AgniKulās growth celebrating with the team, families & friends. -
AgniKul Cosmos
@AgnikulCosmos
Thanks to the Rotary Club of Madras Temple City (RCMTC) for recognising the relentless hardwork and sincere commitment of our super inspiring young leaders - Saraniya P, Vehicle Director of Agnibaan SOrTeD and Umamaheswari K, Project Director of Mission-01, Agnibaan SOrTeD - by awarding them with the Rekha Shetty Memorial Award.
RCMTC founded in July 1989, happens to be the first club outside of the North America to have had women charter members. The Rekha Shetty Memorial Award was constituted by RCMTC in memory of Rekha Shetty, a trailblazer and achiever who was an active Rotary all her life. The award is given to women who have done something exceptional that can inspire other women and young girls to achieve greater ambitions.
Agnibaan SOrTeD was successfully flown on May 30, 2024 as a controlled vertical ascent flight from Sriharikota. It was the worldās first flight with a single piece 3d printed rocket engine, Indiaās first flight with a semi cryo engine and Indiaās first flight from a private launchpad.
#womeninaerospace #womenleaders -
AgniKul Cosmos reposted
Amitabh Kant
@amitabhk87
Had a wonderful meeting with @srinathr155, co-founder of @AgnikulCosmos, discussing the exciting future of space exploration in India. The successful launch of Agnibaan rocket powered by the worldās first single-piece 3D printed semi-cryogenic engine is a moment of immense pride for the entire nation. Agnikul's innovative approaches and vision for private space transportation are set to transform the industry and create new opportunities.
-
AgniKul Cosmos reposted
SIA - India
@SIA_Ind
We are pleased to announce that Mr Saraniya P, Vehicle Director ā SOrTeD Mission ā 01 & Vice President, Structures & Aerodynamics, @AgnikulCosmos will join us for the India Space Congress 2024 as an #eminentspeaker.
For More: www.indiaspacecongress.com -
AgniKul Cosmos reposted
IIT Madras
@iitmadras
@iitmadras Two women played a key role in launching the worldās first rocket with a 3D-printed engine on May 30: @Saraniyp Periaswamy, Vehicle Director, Agnibaan SorTeD, & Umamaheswari K, Project Director, Mission-01, at @AgnikulCosmos
Read here: m.economictimes.com/tech/technology/women-find-their-feet⦠-
AgniKul Cosmos reposted
Suraksha P
@SurakshaPinnuET
Two women played an important role in the debut of the worldās first rocket equipped with a 3D-printed engine on May 30: @Saraniyp Periaswamy, vehicle director, Agnibaan SorTeD, & Umamaheswari K, project director, Mission-01, at @AgnikulCosmos @iitmadras
economictimes.indiatimes.com/tech/technology/women-find-t⦠-
AgniKul Cosmos reposted
Defence PRO Chennai
@Def_PRO_Chennai
Lt Gen Karanbir Singh GOC-Dakshin Bharat (DB) Area #indianarmy @IaSouthern complimented the @AgnikulCosmos Team for their stupendous launch success on his visit @iitmadras today.
pib.gov.in/PressReleasePage.aspx?PRID=2022161
@adgpi @DefProdnIndia @pibchennai -
AgniKul Cosmos
@AgnikulCosmos
A lot of people have been asking us, so we are posting a rough cut video for now. More videos with better views etc. will follow through the week.
Mission 01 of Agnibaan SOrTeD was successfully accomplished from Agnikul Launch Pad in Sriharikota on May 30, 2024 at 0715 hours IST.
The Agnibaan SOrTeD vehicle is powered by Agnikul's own patented single piece 3D printed semi cryo engine (Agnilet) and works on data acquisition systems and flight computers that were 100% designed in-house. It was a controlled ascent flight with full 3 axis control. The autopilot was fully developed and designed in-house too. The burn time lasted 65 seconds as expected.
This mission has successfully achieved the following milestones
1. First-ever semi-cryo engine launch of India
2. First-ever launch from a private launchpad in India
3. First launch from India driven by computers working on Linux
4. First launch from India driven by an ethernet-based architecture for connecting flight computers within the vehicle
5. First flight with aviation-grade jet fuel and industrial-grade Liquid oxygen
6. World's first flight with a single piece 3D printed engine
#designinindia #madeinindiafortheworldThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Mission 01 wouldnāt have been possible without @isro and @INSPACeIND - extensive support from SDSCSHAR, VSSC, ISTRAC and CSIR-NAL. It takes an entire community to get a new type of launch done for the first time.
www.isro.gov.in/HandholdingStartups.html -
AgniKul Cosmos
@AgnikulCosmos
Thank you, Honāble PM Shri. @narendramodi ji for your guidance and support in encouraging private player participation in Bharat in the space sector. We assure you that we will do the best we can in building original technological solutions with the opportunities being made available to us through @INSPACeIND @isro and @iitmadras #designinindia #madeinindiafortheworld
Narendra Modi
@narendramodi
A remarkable feat which will make the entire nation proud!
The successful launch of Agnibaan rocket powered by worldās first single-piece 3D printed semi-cryogenic engine is a momentous occasion for Indiaās space sector and a testament to the remarkable ingenuity of our Yuva Shakti.
My best wishes to the @AgnikulCosmos team for their future endeavours. -
AgniKul Cosmos reposted
Dr. P V Venkitakrishnan
@DrPVVenkitakri1
India doesn't require kings any more.What we want is king makers. Srinath Ravichandran & Moin of Agnikul Cosmos, have demonstrated this through their successful flight of Agniban SoRTeD. They have moulded two successful women leaders K Umamaheswari and Saraniya Periyaswamy .
-
AgniKul Cosmos reposted
Dr. P V Venkitakrishnan
@DrPVVenkitakri1
So Proud of You,Uma!
-
AgniKul Cosmos reposted
Dr. P V Venkitakrishnan
@DrPVVenkitakri1
Saraniya Periyaswamy, Vehicle Director of successful SoRTeD Mission of Agnikul Cosmos, Chennai. So Proud of You, Saraniya!
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the successful completion of our first flight - Mission 01 of Agnibaan SOrTeD - from our own and Indiaās first & only private Launchpad within SDSC-SHAR at Sriharikota. All the mission objectives of this controlled vertical ascent flight were met and performance was nominal. The vehicle was completely designed in-house and was powered by the worldās first single piece 3d printed engine and also happens to be Indiaās first flight with a semi cryo engine. Our greatest thanks to @INSPACeIND @isro @iitmadras & our incredibly committed team in helping us prove that a private player can design and fly original space tech hardware in India. #madeinindiafortheworld
-
AgniKul Cosmos
@AgnikulCosmos
NOTAM issued. šš It is launch time.
-
AgniKul Cosmos
@AgnikulCosmos
This engine test is powered by Agnikul's own data acquisition systems & flight computers that were 100% designed in-house.
This test setup replicates the Agnibaan SOrTeD vehicle & Agnikul's launchpad at Sriharikota as they would be on the day of the launch.
Moreover, this test also proves the capability of the entire avionics chain of the SOrTeD vehicle in controlling the entire propulsion system of the vehicle.
Lastly, this test also runs the same Automated Launch Sequence (ALS), that we expect to run for SOrTeD's launch.
A vacuum optimised version of this Agnilet will be used in the second stage of Agnikul's orbital vehicle - Agnibaan.
youtu.be/-Qr9okaXJdg
#makeinindia #aatmanirbharbharat
#agnibaan #agnikul #semicryogenic #rocketengine #rocketenginetest #madeinindiafortheworld #startupindia
#3dprinting
#additivemanufacturing -
AgniKul Cosmos
@AgnikulCosmos
Had to call off todayās launch attempt of Agnibaan SOrTeD just a second into Automated Launch Sequence (ALS) initiation (at T-129 seconds) because of a communication issue between 2 of our onboard hardware. Although it is frustrating to see a HOLD this close to lift off, we are glad that our ALS did its job. Weāll get to the root cause and come back for launch after a fixing the cause. Thank you for the support as always. @isro @INSPACeIND @iitm_respark @iitmadras @IITMIC Rocket science is rocket science.
AgniKul Cosmos
@AgnikulCosmos
This is still a good watch :)
youtu.be/yqukAJYf7LI -
AgniKul Cosmos
@AgnikulCosmos
Launch update : We may end up just going over the existing NOTAM dates to complete readiness checks and hence will have to issue a new NOTAM. This NOTAM will be issued soon. Thanks again for all the support.
-
AgniKul Cosmos
@AgnikulCosmos
Holding our launch out of an abundance of caution based on certain minor observations from the full countdown rehearsals last night. Will keep you all posted on the new date and time. Thanks a lot for all the support that has been pouring in.
-
AgniKul Cosmos
@AgnikulCosmos
March 22 - 28, 2024
-
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Was great to see Indian Astronaut candidate designates being announced live at VSSC. This is an unbelievable sight for me - grew up dreaming about going to space and until today never really imagined an Indian in an astronaut suit. (Quick photo with friends from the communityā¬ļø)
Narendra Modi
@narendramodi
It was a very special moment for me to hand over wings to the four Indian astronaut-designates. They reflect the hopes, aspirations and optimism of 140 crore Indians.
India is proud of Group Captain Prasanth Balakrishnan Nair, Group Captain Ajit Krishnan, Group Captain Angad Pratap and Wing Commander Shubhanshu Shukla. -
AgniKul Cosmos
@AgnikulCosmos
We love you to the moon and back @isro for inspiring us everyday. ā¤ļø
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce our ~$27M Series B fundraise. Beyond validating what we are building as a team, this support from the investor community is also a signal that the entire ecosystem in India is growing. This capital infusion will allow us to prepare for the next step in serving our customers across the world. We are extremely grateful to both the new investors and our existing investors for their continued support. Finally, this is also more power to the entire team for building new and original space tech hardware in the country. #madeinindiafortheworld #launchanwyhereanytime thanks for all the clarity in policy @isro @INSPACeIND šš»
techcrunch.com/2023/10/16/agnikul-funding-india-space-tec⦠-
AgniKul Cosmos
@AgnikulCosmos
āHere comes the sunā¦ā
-
AgniKul Cosmos
@AgnikulCosmos
A picture to be framed and kept by every space enthusiast ā¤ļø @isro - š«”
ISRO
@isro
Chandrayaan-3 Mission:
Smile, pleasešø!
Pragyan Rover clicked an image of Vikram Lander this morning.
The image was taken by the Navigation Camera onboard the Rover (NavCam).
NavCams for the Chandrayaan-3 Mission are developed by the Laboratory for Electro-Optics Systems (LEOS)
www.isro.gov.in/LEOS.html -
AgniKul Cosmos
@AgnikulCosmos
And just like that a new journey beginsā¦
-
AgniKul Cosmos reposted
ISRO
@isro
Chandrayaan-3 Mission:
The image captured by the
Landing Imager Camera
after the landing.
It shows a portion of Chandrayaan-3's landing site. Seen also is a leg and its accompanying shadow.
Chandrayaan-3 chose a relatively flat region on the lunar surface š
#chandrayaan_3
#ch3 -
AgniKul Cosmos
@AgnikulCosmos
Watching history being made as a team is a feeling like none other.
Unforgettable moment for all of us. Thank you @isro
AgniKul Cosmos
@AgnikulCosmos
A moment like no other.
-
AgniKul Cosmos
@AgnikulCosmos
AgniKul Cosmos
@AgnikulCosmos
Watching history being made as a team is a feeling like none other.
Unforgettable moment for all of us. Thank you @isro -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have had the opportunity to bring our Agnibaan SOrTeD vehicle to our Launchpad at SDSC-SHAR on Independence Day to commence integration checks. We thank @isro and @INSPACeIND for their continuous encouragement and support in getting us this far. (1/n)
AgniKul Cosmos
@AgnikulCosmos
Agnibaan SOrTeD (Suborbital Tech Demonstrator) is a single-stage launch vehicle driven by Agnikulās patented Agnilet engineā an entirely 3D-printed, single-piece, 6 kN semi-cryogenic engine. Agnibaan SOrTeD will lift off vertically & follow a predetermined trajectory (2/n)
AgniKul Cosmos
@AgnikulCosmos
The trajectory, manoeuvres & various flight events that will occur during the mission have been configured to validate tech integral to the success of our upcoming orbital flights. Lastly, we are excited to be attempting this flight from our own Launchpad at Sriharikota. (n/n)
-
AgniKul Cosmos
@AgnikulCosmos
How does one read this and think about going to sleep on a Saturday night? @isro ās shot of Saturday night excitement for all of us. #chandrayaan
ISRO
@isro
Chandrayaan-3 Mission:
āMOX, ISTRAC, this is Chandrayaan-3. I am feeling lunar gravity šā
š
Chandrayaan-3 has been successfully inserted into the lunar orbit.
A retro-burning at the Perilune was commanded from the Mission Operations Complex (MOX), ISTRAC, Bengaluru.
The next operation - reduction of orbit ā is scheduled for Aug 6, 2023, around 23:00 Hrs. IST. -
AgniKul Cosmos reposted
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to have had the opportunity to be at the CEO forum and share stage with Shri @narendramodi Ji and President @EmmanuelMacron (Represented here by our cofounder and CEO @srinathr155 ) - Look forward to working with our French counterparts.
Narendra Modi
@narendramodi
President @EmmanuelMacron and I met top CEOs to discuss ways to diversify business cooperation. I highlighted the reforms in India and urged entrepreneurs to harness the many opportunities our nation offers.
-
AgniKul Cosmos
@AgnikulCosmos
How can we see this & not be inspired? Our moon has always drawn our urge, to explore a little more. As Arthur Clarke said, it would really have taken all of humanity a lot more time to venture beyond earth if not for the moon. Thank you @isro for showing us the path to dream.
-
AgniKul Cosmos
@AgnikulCosmos
Watching #chandrayaan3launch as a team was an experience like none other. @isro continues to inspire all of us by reminding us that there is more to explore than one could possibly imagine. All we need to do is look up and figure out a way to get there, no matter how hard it gets
-
AgniKul Cosmos
@AgnikulCosmos
1 year since we inaugurated Indiaās first and one of a kind facility - Agnikulās Rocket Factory 1 - to 3d print & manufacture 2 rocket engines every week. Amazing work by the team in churning out multiple engines. Upcoming flightās engines were realized inhouse in this facility.
-
AgniKul Cosmos reposted
Dr. P V Venkitakrishnan
@DrPVVenkitakri1
Visited the Theyyur Propulsion Complex of Agnikul.Very impressive. In less than 3 years,these youngsters have set up a world class facility
Kudos to the whole team .They are working day and night braving the extreme heat . Hats off to their enthusiasm š -
AgniKul Cosmos
@AgnikulCosmos
This is a test that successfully mimicked the separation of the Launchpad umbilical system from the launch vehicle. Such tests help understand how a vehicleās autopilot would have to handle various forces acting on the vehicle during vertical lift off. š
youtu.be/1_-mbR-DHfY -
AgniKul Cosmos reposted
ISRO
@isro
LVM3-M3š/OneWeb š° India-2 mission
is accomplished!
All 36 OneWeb Gen-1 satellites injected into the intended orbits
In its 6th consecutive successful flight, LVM3 carried 5805 kg of payload to Low Earth Orbit
@OneWeb
@NSIL_India -
AgniKul Cosmos
@AgnikulCosmos
Rehearsing full chain go/no-go for š
-
AgniKul Cosmos reposted
IIT Madras Research Park
@iitm_respark
Privileged to be having HRH the Crown Prince of Denmark at our innovation ecosystem at IITMRP! We were honoured to share an overview of our latest technologies developed in healthtech, wireless comm tech, the indigenous 5G testbed & @AgnikulCosmos's 3D printing rocket facility.
-
AgniKul Cosmos
@AgnikulCosmos
Some crossroads in life are just amazing. In this case - Go left for planes āļø vs. go right for rockets š Thank you at @iitmadras @iitmrp @IITMIC for creating such a wonderful platform for building real tech in India #startupindia @makeinindia
-
AgniKul Cosmos
@AgnikulCosmos
A view to remember #madeinindia
-
AgniKul Cosmos
@AgnikulCosmos
One of the systems that differentiate a engine ground test fire from actual flight is the autopilot. Here is a video marking the closure of the characterisation of the gimbaling system using which the autopilot rotates the thrust
Video : youtu.be/by4DlRQWX8M
#autopilot -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the successful completion of the flight acceptance test of our Agnilet engine that will be used for our upcoming controlled suborbital flight. Thankful to the @INSPACeIND team to have come in person & experienced this live (1/n)
Video : www.youtube.com/watch?v=bj805ThRvtM
AgniKul Cosmos
@AgnikulCosmos
Agnilet is a single piece rocket engine - the whole engine is 3d printed, in one shot & as a single component
Sea level thrust : 6 kN
Mass flow rate: 3 kg/s
Propellants: Subcooled LOX at 84K & ATF (semicryogenic engine)
Burn time: 108 seconds
Cooling: Regeneratively Cooled (2/n)
AgniKul Cosmos
@AgnikulCosmos
This engine was completely manufactured at Agnikul's Rocket Factory - 1. So, besides validating the engine for flight, we are also humbled to demonstrate the ability to design, manufacture & test a fresh rocket engine fully in-house(n/n) #madeinindia #designedinindia #3dprinting
-
AgniKul Cosmos
@AgnikulCosmos
Merry š Christmas š everyone š
-
AgniKul Cosmos reposted
DD News
@DDNewslive
StartupChampions2.0 | @srinathr155, Co founder & CEO, @agnikulcosmos and @moin_spm, Co founder and COO, @agnikulcosmos shares everything about India Space Association (ISpA)
Watch: youtu.be/X5L3Qo-l1Ho
@startupindia
#startup
@Mayank23Agrawal -
AgniKul Cosmos reposted
DD News Rajasthan
@DDNewsRajasthan
#startupchampions2 ą¤ą„ ą¤ą¤ø बार ą¤ą„ ą¤ ą¤ą¤ ą¤®ą„ą¤ ą¤ ą¤ą¤¤ą¤°ą¤æą¤ą„ष ą¤ą¤¦ą„ą¤Æą„ą¤ ą¤ą„ ą¤øą„ą¤ą¤¾ą¤°ą„ą¤ą¤ प ą¤ą„ą¤®ą„ą¤Ŗą¤æą¤Æą¤Ø @AgnikulCosmos ą¤ą„ सफलता ą¤ą„ ą¤ą¤¹ą¤¾ą¤Øą„, ą¤ą¤øą¤ą„ सह-ą¤øą¤ą¤øą„ą¤„ą¤¾ą¤Ŗą¤ą„ą¤ ą¤ą„ ą¤ą¤¼ą„बानą„
ą¤ą¤ रात 9 ą¤¬ą¤ą„ #ddnews पर व रात 10 ą¤¬ą¤ą„ #ddindia पर ą¤ą¤° रविवार ą¤¦ą„ą¤Ŗą¤¹ą¤° 12 ą¤¬ą¤ą„ #ddnational पर
@startupindia
@Mayank23Agrawal
@DDNewsHindi -
AgniKul Cosmos reposted
ą¤”ą„ą¤”ą„ ą¤Øą„ą¤Æą„ą„
@DDNewsHindi
#startupchampions2 ą¤ą„ ą¤ą¤ø बार ą¤ą„ ą¤ ą¤ą¤ ą¤®ą„ą¤ ą¤ ą¤ą¤¤ą¤°ą¤æą¤ą„ष ą¤ą¤¦ą„ą¤Æą„ą¤ ą¤ą„ ą¤øą„ą¤ą¤¾ą¤°ą„ą¤ą¤ प ą¤ą„ą¤®ą„ą¤Ŗą¤æą¤Æą¤Ø @AgnikulCosmos ą¤ą„ सफलता ą¤ą„ ą¤ą¤¹ą¤¾ą¤Øą„, ą¤ą¤øą¤ą„ सह-ą¤øą¤ą¤øą„ą¤„ą¤¾ą¤Ŗą¤ą„ą¤ ą¤ą„ ą¤ą¤¼ą„बानą„
ą¤ą¤ रात 9 ą¤¬ą¤ą„ #ddnews पर व रात 10 ą¤¬ą¤ą„ #ddindia पर ą¤ą¤° रविवार ą¤¦ą„ą¤Ŗą¤¹ą¤° 12 ą¤¬ą¤ą„ #ddnational पर
@startupindia
@Mayank23Agrawal
@paritoshsharma -
AgniKul Cosmos reposted
ą¤”ą„ą¤”ą„ ą¤Øą„ą¤Æą„ą„
@DDNewsHindi
'ą¤øą„ą¤ą¤¾ą¤°ą„ą¤ą¤ प ą¤ą„ą¤ą¤Ŗą¤æą¤Æą¤ą¤ø 2.0' ą¤®ą„ą¤ ą¤ą¤ø ą¤¹ą¤«ą¤¼ą„ą¤¤ą„ ą¤®ą¤æą¤²ą¤æą¤ ą¤øą„ą¤Ŗą„स ą¤ą¤ą¤”ą¤øą„ą¤ą„ą¤°ą„ 'ą¤ ą¤ą„ą¤Øą¤æą¤ą„ल ą¤ą„ą¤øą¤®ą„ą¤ø' ą¤ą„ ą¤øą¤ą¤øą„ą¤„ą¤¾ą¤Ŗą¤ ą¤ą¤° ą¤ą¤ą¤”ियन ą¤øą„ą¤Ŗą„स ą¤ą¤øą„ą¤øą¤æą¤ą¤¶ą¤Ø ą¤ą„ ą¤ ą¤§ą„ą¤Æą¤ą„ष ą¤ą¤Æą¤ą¤¤ ą¤”ą„ ą¤Ŗą¤¾ą¤ą¤æą¤² सą„
#ddnews पर हर शनिवार रात 9 ą¤¬ą¤ą„
#ddindia पर शनिवार रात 10 ą¤¬ą¤ą„
#ddnational पर रविवार ą¤¦ą„ą¤Ŗą¤¹ą¤°12 ą¤¬ą¤ą„
@AgnikulCosmos
@startupindia -
AgniKul Cosmos reposted
DD India
@DDIndialive
Agnikul Cosmos, India's first-ever factory to manufacture 3D-printed rocket
It builds small launch vehicles for use in commercial space missions which will attract the global satellite launch market.
@AgnikulCosmos
@startupindia
Watch here: youtu.be/dzdq5WDDcFQ -
AgniKul Cosmos reposted
ISpA - Indian Space Association
@ISpA_India
Inspiring to hear spearheads of #indian #startup ecosystem sharing their thoughts on role of @INSPACeIND in #satcom sector.
We appreciate @ConnectBIF initiative to highlight the interest of Space Industry
@PixxelSpace @AgnikulCosmos @satchakra_iitm @SkyrootA @DhruvaSpace -
AgniKul Cosmos
@AgnikulCosmos
Humbled & privileged to have had the opportunity to build our 1st launch pad & Mission Control Center within Sriharikota & to have it inaugurated by Chairman, @isro. Agnikulās launches would be carried out from here. Thanks to @isro & @INSPACeIND for their help & valuable support
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to have recād @isro ās FTS packages to help us on flight safety in our 1st mission- a controlled flight tracking a predetermined trajectory. This is a significant step in getting ready for launch from ISROās launchpads. Grateful to @INSPACeIND for their support throughout
ISRO
@isro
ISRO delivered Flight Termination System (FTS) packages to @AgnikulCosmos
with the support of @INSPACeIND to be used on Agnikulās launch vehicle Agnibaan
The first time an ISRO vehicle's system supports a private launch vehicle built in India. www.isro.gov.in/flight_termination_system.html -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce that we successfully test fired one version of our patented technology based single piece, fully 3d printed, 2nd stage semi cryo engine - Agnilet - at VSSC, @isro
www.isro.gov.in/ISRO_Agnilet_Engine.html
Incredibly thankful to @INSPACeIND and @isro for enabling this. (1/2)
AgniKul Cosmos
@AgnikulCosmos
Besides validating our in-house tech, this is also a huge step for us in understanding how to design, develop & fire rocket engines at a professional level. An unforgettable day for Agnikul! #designinindia #3dprinting #makeinindia (2/2)
-
AgniKul Cosmos
@AgnikulCosmos
Happy Diwali #happydiwali #happydiwali2022 - Diwali is always special for launch vehicle people :) So, special wishes from all of us at Agnikul for a very happy #festivaloflights
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to have had the opportunity to give a tour of our rocket factory-1 to Honāble Minister @PiyushGoyal ji - it was an honour to be interacting with him on how we are building original space tech hardware in India as the space policy shapes up here @PiyushGoyalOffc
-
AgniKul Cosmos reposted
Ministry of Education
@EduMinOfIndia
Today, Honāble Education Minister, Shri @dpradhanbjp visited the Rocket Factory of @AgnikulCosmos, a start-up incubated under @iitmadras.
He said that the Indian space sector is expanding to help our youth scale new heights of success. -
AgniKul Cosmos
@AgnikulCosmos
It was an absolute honour and unparalleled in recognition to have you spend so much time with us, Sir. We are deeply humbled to have you mention that you are seeing world class and original work being done by our team.Thank you, Sir @iitmadras @iitmrp @IITMIC #aatmanirbharbharat
Dharmendra Pradhan
@dpradhanbjp
Like Indiaās prolific IT sector, the Indian space sector is something that everybody should watch out for.
Visited the Rocket Factory of @AgnikulCosmos, a start-up incubated by @iitmadras. It is Indiaās first-ever factory to manufacture 3D-printed rocket š engines. -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have been granted a patent on the design & manufacturing of our single-piece engines. When we started designing the engine, we did not know the extent to which 3d printing could help. Now, after multiple successful firings, 3d printing seems to be the best choice.
-
AgniKul Cosmos reposted
IIT Madras
@iitmadras
@AgnikulCosmos, an @iitmadras incubated startup has been awarded the patent for design & manufacturing of its single piece 3D printed rocket engine. Read more about it & India's 1st dedicated rocket facility at @iitm_respark as per @timesofindia article
timesofindia.indiatimes.com/city/chennai/agnikul-cosmos-g⦠-
AgniKul Cosmos reposted
IIT Madras Research Park
@iitm_respark
Our latest edition of ONE-BIT, brings you an exclusive peek into the success of our incubatee @AgnikulCosmos, featured in "COMPANIES" - A chat with IITMRP's "Breakthrough Companies & Startups".
Watch full interview here: www.youtube.com/watch?v=35drWxJqXho&list=PL9t3p8l_hPW8QTC⦠-
AgniKul Cosmos
@AgnikulCosmos
Humbled to have so many people from all parts of the country join hands in helping Agnikul build original space tech hardware in India. Honoured to have this opportunity to contribute in a small way towards nation building #indiaat75 #independencedayindia2022 #ą¤øą„ą¤µą¤¤ą¤ą¤¤ą„रतादिवस
-
AgniKul Cosmos reposted
ISpA - Indian Space Association
@ISpA_India
@OneWeb @astramwp @centumelec @GodrejAndBoyce Robinsons Cargo MIL Industries @GalaxEye @azistabst @BECIL_India @cmdbel @AgnikulCosmos Avantel @amazonIN @ADTLOfficial @Maxar Walchandnagar industries @Digantarahq @SkyrootA @DhruvaSpace @tsc_tech @KeplerAerospac1
-
AgniKul Cosmos reposted
IIT Madras Research Park
@iitm_respark
We welcomed Mr. Nandan Nilekani, Co-Founder & Non-Executive Chairman, @Infosys, on his visit to our ecosystem! He also shared his valuable insights with select IITMIC startups - @solinas_in, @neomotionlife, @AgnikulCosmos & @SkillVeri who extensively showcased their work!
-
AgniKul Cosmos reposted
IIT Madras
@iitmadras
In this vlog, @thebetterindia team meets @srinathr155 & @moin_spm, co-founders of @AgnikulCosmos, a startup incubated at @iitmadras, planning to launch a cab-like service to help small satellite manufacturers launch onto the low orbits.
#atmanirbharbharat
www.youtube.com/watch?v=ZiIl9UDQXwA -
AgniKul Cosmos reposted
Dharmendra Pradhan
@dpradhanbjp
This decade will not only be Indiaās #techade but also, Indiaās space age.
Congratulate @iitmadras and @AgnikulCosmos on establishing a rocket factory at @iitmrp, Indiaās first-ever facility to manufacture 3D-printed rocket engines.
IIT Madras Research Park
@iitm_respark
We're extremely proud to share that @AgnikulCosmos has inaugurated India's first-ever facility to manufacture 3D-printed rocket engines at @iitm_respark!
This facility houses a metal 3D-printer where their rocket engines will be completely fabricated & assembled from scratch! -
AgniKul Cosmos
@AgnikulCosmos
Our Rocket Factory - 1 was inaugurated by Chief Guest Shri N Chandrasekaran, Chairman Tata Sons at @iitmrp with @isro Chairman Shri Somanath being the Guest of Honour. We can make 2 engines/week now! In the morning, Chairman ISRO, Director SDSC-SHAR, Director VSSC visited us 1/n
AgniKul Cosmos
@AgnikulCosmos
The visit to our testing facilities by two ISRO Centre Directors, besides Chairman ISRO himself was truly inspiring. In their address to the team, they recollected their own experiences building facilities @isro - we are humbled and honoured to have them spend time with us. 2/n
AgniKul Cosmos
@AgnikulCosmos
While the visit happened in the morning, the afternoon was even more impactful with the inauguration of Rocket Factory - This was also graced by Chairman, @INSPACeIND @GoenkaPk , Director @iitmadras and Director, SDSC-SHAR. Ever so grateful to @iitmrp for their support here. 3/n
AgniKul Cosmos
@AgnikulCosmos
On the whole, a day which none of us at Agnikul can ever ever forget. Thankful to customers, vendor partners and investors for having made us come this far. A huge milestone achieved and yet a lot more to be done as we progress towards enabling super quick space access. n/n
AgniKul Cosmos
@AgnikulCosmos
Our sincerest thanks to Chairman, Tata Sons, Chairman, ISRO, Chairman IN-SPACe, Director VSSC, Director SDSC-SHAR, Director, IIT Madras, Board member TDB, Dr. VK Rai and our founding advisor Mr. RV Perumal for making this a wonderfully memorable and historic occasion.
-
AgniKul Cosmos reposted
MOIN SPM
@moin_spm
Testing our engines @isro with @INSPACeIND support. This is the first time in the country that an engine developed privately outside ISRO will be tested at ISRO. This is the era of space š#makeinindia #aatmanirbharbharat #space #agnilet #agnibaan
AgniKul Cosmos
@AgnikulCosmos
Humbled to have this opportunity extended to us by the Dept. Of Space for testing our 2nd stage, single piece, 100% 3d printed, semi cryogenic engines. We are excited to begin firing our engines at @isro with @INSPACeINDās support. #madeinindia #agnilet #agnibaan #designedinindia
IN-SPACe
@INSPACeIND
As part of the framework MoU with @INSPACeIND
@AgnikulCosmos has signed an agreement with VSSC @isro to test fire its fully 3d printed-one-piece, 2nd stage semi-cryo engine.
This test will help validate the engine's performance, qualifying it for its upcoming flights -
AgniKul Cosmos
@AgnikulCosmos
Humbled to have this opportunity extended to us by the Dept. Of Space for testing our 2nd stage, single piece, 100% 3d printed, semi cryogenic engines. We are excited to begin firing our engines at @isro with @INSPACeINDās support. #madeinindia #agnilet #agnibaan #designedinindia
IN-SPACe
@INSPACeIND
As part of the framework MoU with @INSPACeIND
@AgnikulCosmos has signed an agreement with VSSC @isro to test fire its fully 3d printed-one-piece, 2nd stage semi-cryo engine.
This test will help validate the engine's performance, qualifying it for its upcoming flights -
AgniKul Cosmos reposted
All India Radio News
@airnewsalerts
My dear countrymen, there is hardly any of us who, in oneās life, has not had fantasies pertaining to the sky: #pmonairšļø
#mannkibaat -
AgniKul Cosmos
@AgnikulCosmos
Humbled by this recognition. Lucky to be doing this when such historic reforms are happening. Thank you Honāble Shri. @narendramodi Ji. We are grateful to have the Govtās support & will make sure we use this opportunity to make original tech in India @PMOIndia @isro @INSPACeIND
All India Radio News
@airnewsalerts
Till a few years ago, in our country, in the space sector, no one even thought about start-ups. Today their number is more than a hundred: #pmonairšļø
#mannkibaat | @AgnikulCosmos | @DhruvaSpace -
AgniKul Cosmos reposted
MOIN SPM
@moin_spm
ą¤®ą¤¾ą¤Øą¤Øą„ą¤Æ ą¤Ŗą„ą¤°ą¤§ą¤¾ą¤Ø ą¤®ą¤ą¤¤ą„ą¤°ą„ @narendramodi ą¤ą„ ą¤¹ą¤®ą„ą¤ यह ą¤ą„षण ą¤¦ą„ą¤Øą„ ą¤ą„ ą¤²ą¤æą¤ ą¤§ą¤Øą„ą¤Æą¤µą¤¾ą¤¦ą„¤ ą¤ą¤Ŗą¤Øą„ वादा ą¤ą„ निबया ą¤«ą„ą¤² ą¤øą¤¾ą¤ą¤ ą¤°ą„ą¤ą„ą¤ ą¤ą„ ą¤ą¤ą¤¾ą¤° ą¤¦ą„ą¤ą¤Øą„ ą¤ą¤¾ ą¤ą¤° ą¤ą¤¬ ą¤ą¤Ŗ ą¤Øą„ "बाप ą¤°ą„ ą¤ą¤¹ą¤¾" - मान ą¤®ą„ą¤ ą¤®ą„ą¤°ą„ ą¤ą¤¤ą¤Øą„ ą¤ą„ą¤¶ą„ ą¤¹ą„ą¤ ą¤ą„ ą¤®ą„ą¤ ą¤¶ą¤¬ą„ą¤¦ ą¤®ą„ą¤ बयान ą¤ą¤° ą¤Øą¤¹ą„ą¤ ą¤Ŗą¤¾ą¤°ą„ą¤ āAab hum bhi Space Jayengeā #space #aatmanirbhar @isro @INSPACeIND
-
AgniKul Cosmos
@AgnikulCosmos
Another unforgettable moment with the Honourable PM @narendramodi Ji-he stopped by to understand what we have built. Thank you for taking the time to visit our display, Sir. Best part : he was able to remember the engine we had indoors with what was attached to the 2nd stage.
Narendra Modi
@narendramodi
Sharing highlights from my Gujarat visit yesterdayā¦
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
In conclusion, June 10, 2022 will go down as an historic day for our country and certainly an absolutely unforgettable day for each one of us at Agnikul. Now, we just need to get ready enough to get our launches going. #madeinindia #madeinindiafortheworld (n/n)
AgniKul Cosmos
@AgnikulCosmos
Also, humbled to use this historic moment for our country to announce and display one our products #agnibaan at 1:1 scale for the very 1st time. We couldnāt have asked for a better venue to unravel this. Fully #madeinindia Fully #designedinindia. Humbled. Honoured. Grateful.(3/n)
AgniKul Cosmos
@AgnikulCosmos
The gates to space from India have now been opened wider than ever before and the Honourable PMās powerful speech yesterday highlighted very clearly that the country will encourage private players to be āwinnersā rather than just āvendorsā. We should all be feeling lucky! (2/n)
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the signing of our MoU with @INSPACeIND in the presence of our Honourable Prime Minister @narendramodi Ji. This MoU covers all aspects of working the Dept. Of Space including launching from India. @PMOIndia @AmitShah @GoenkaPk @isro 1/n
Narendra Modi
@narendramodi
Unlocking India's potential in space sector! Speaking at inauguration of IN-SPACe headquarters in Bopal, Ahmedabad. x.com/i/broadcasts/1jMJgeQbPXlKL
-
AgniKul Cosmos
@AgnikulCosmos
Also, humbled to use this historic moment for our country to announce and display one our products #agnibaan at 1:1 scale for the very 1st time. We couldnāt have asked for a better venue to unravel this. Fully #madeinindia Fully #designedinindia. Humbled. Honoured. Grateful.(3/n)
AgniKul Cosmos
@AgnikulCosmos
The gates to space from India have now been opened wider than ever before and the Honourable PMās powerful speech yesterday highlighted very clearly that the country will encourage private players to be āwinnersā rather than just āvendorsā. We should all be feeling lucky! (2/n)
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the signing of our MoU with @INSPACeIND in the presence of our Honourable Prime Minister @narendramodi Ji. This MoU covers all aspects of working the Dept. Of Space including launching from India. @PMOIndia @AmitShah @GoenkaPk @isro 1/n
Narendra Modi
@narendramodi
Unlocking India's potential in space sector! Speaking at inauguration of IN-SPACe headquarters in Bopal, Ahmedabad. x.com/i/broadcasts/1jMJgeQbPXlKL
-
AgniKul Cosmos
@AgnikulCosmos
The gates to space from India have now been opened wider than ever before and the Honourable PMās powerful speech yesterday highlighted very clearly that the country will encourage private players to be āwinnersā rather than just āvendorsā. We should all be feeling lucky! (2/n)
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the signing of our MoU with @INSPACeIND in the presence of our Honourable Prime Minister @narendramodi Ji. This MoU covers all aspects of working the Dept. Of Space including launching from India. @PMOIndia @AmitShah @GoenkaPk @isro 1/n
Narendra Modi
@narendramodi
Unlocking India's potential in space sector! Speaking at inauguration of IN-SPACe headquarters in Bopal, Ahmedabad. x.com/i/broadcasts/1jMJgeQbPXlKL
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the signing of our MoU with @INSPACeIND in the presence of our Honourable Prime Minister @narendramodi Ji. This MoU covers all aspects of working the Dept. Of Space including launching from India. @PMOIndia @AmitShah @GoenkaPk @isro 1/n
Narendra Modi
@narendramodi
Unlocking India's potential in space sector! Speaking at inauguration of IN-SPACe headquarters in Bopal, Ahmedabad. x.com/i/broadcasts/1jMJgeQbPXlKL
-
AgniKul Cosmos
@AgnikulCosmos
And we have phase one done! Terrific work by the crew at an amazing pace! This involved moving, cutting and bending a LOT of metal. The wait for a new Agnite engine to be integrated starts now #rocketenginetesting #rocketengine #agnite @iitmrp @iitmadras @IITMIC @startup_mission
AgniKul Cosmos
@AgnikulCosmos
A new dawn⦠a new rig⦠coming soon.
-
AgniKul Cosmos
@AgnikulCosmos
A few Agnilets roaring to life. As always, each of these is a single piece of hardware with no assembly. 100% 3d printed.
youtu.be/USaYAHI29uY #rocketengine #designinindia #makeinindia #3dprinting -
AgniKul Cosmos reposted
Safran Electronics & Defense
@SafranElecDef
We are very excited to be onboard Agnibaan, the launch vehicle designed and produced by @AgnikulCosmos, one of the most promising #newspace startup. Thank you Agnikul for your trust! š¤š¤
AgniKul Cosmos
@AgnikulCosmos
Excited to be working with @SAFRAN Data Systems in taking a highly modular approach to launch vehicle making. We believe this will change the very manner in which a customerās ask translates to a journey to orbit #customizability #makeinindiafortheworld
www.linkedin.com/posts/safran-space_safrandatasystems-new⦠-
AgniKul Cosmos reposted
CEG Tech Forum
@CEG_Tech_Forum
Every problem comes with a solution. Take heed that it is challenging to derive the solution when it is relevant to hardware. Give our questions a try and build something bigger.
Register in: krk.org.in/buildathon
.
.
.
@AgnikulCosmos -
AgniKul Cosmos
@AgnikulCosmos
Excited to be working with @SAFRAN Data Systems in taking a highly modular approach to launch vehicle making. We believe this will change the very manner in which a customerās ask translates to a journey to orbit #customizability #makeinindiafortheworld
www.linkedin.com/posts/safran-space_safrandatasystems-new⦠-
AgniKul Cosmos reposted
IIT Madras Incubation Cell
@IITMIC
The delegates of the 'Imagining India@2047' Symposium at @iitm_respark last week visited the Incubation Cell and saw demos from some of our #startups across different sectors like #spacetech, #robotics,#skilldevelopment, #assistivetech, etc. @DARPG_GoI #startupindia #makeinindia
-
AgniKul Cosmos
@AgnikulCosmos
We are humbled to have the opportunity to do very original design in India. #designinindia #makeinindia
IIT Madras Research Park
@iitm_respark
Mr. Srinath, Co-Founder & CEO, @AgnikulCosmos shares his perspective on the vision of why Design-in-India is as important as Make-in-India for being truly AtmaNirbhar and the framework of getting there by 2047!
@DrJitendraSingh @DARPG_GoI @NCGG_DARPG_GoI @iitmadras -
AgniKul Cosmos
@AgnikulCosmos
āJā for Jet Deflector. Fully designed and realized in-house at Agnikul. Second picture for scale.
-
AgniKul Cosmos
@AgnikulCosmos
Thank you, Sir. We, as a team, are humbled and honoured to have your support in this journey to space.
anand mahindra
@anandmahindra
Hitching a ride with these guys to the stars⦠Iām proud to be an investor in this talented & ambitious teamā¦
-
AgniKul Cosmos
@AgnikulCosmos
A new dawn⦠a new rig⦠coming soon.
-
AgniKul Cosmos reposted
Dr Jitendra Singh
@DrJitendraSingh
AgniKul Cosmos
@AgnikulCosmos
Honoured and humbled to have had the wonderful opportunity to showcase what we do to Shri Dr. @DrJitendraSingh and other dignitaries at the first tech startups conclave held by @AICRAINDIA #aicra @RAJ_AICRA #madeinindia @IndiaDST
Kiran Bedi
@thekiranbedi
The #unicorns in the Making.
At the First Tech StartUps Conclave held by #aicra in Delhi.
@RAJ_AICRA
Pic with StartUps Awardees. -
AgniKul Cosmos
@AgnikulCosmos
Honoured and humbled to have had the wonderful opportunity to showcase what we do to Shri Dr. @DrJitendraSingh and other dignitaries at the first tech startups conclave held by @AICRAINDIA #aicra @RAJ_AICRA #madeinindia @IndiaDST
Kiran Bedi
@thekiranbedi
The #unicorns in the Making.
At the First Tech StartUps Conclave held by #aicra in Delhi.
@RAJ_AICRA
Pic with StartUps Awardees. -
AgniKul Cosmos
@AgnikulCosmos
Baby steps towards getting to orbit⦠Learning Agnibaanās second stage assembly. #madeinindia @isro #madeinindiafortheworld @IITMIC @iitmadras @iitmrp @startupindia @startup_mission Lesson learnt: Launch vehicles, even the small ones such as Agnibaan,are reasonably large systems
-
AgniKul Cosmos
@AgnikulCosmos
This year we vow that when the nation looks up, we can all see this chakra flying high with all your wishes
@makeinindia #madeinindia @startupindia @startup_mission @IITMIC @iitmadras @iitmrp #republicdayindia #happyrepublicday2022 #ą¤ą¤£ą¤¤ą¤ą¤¤ą„रदिवस #republicday #jaihind š®š³ #january26 -
AgniKul Cosmos reposted
SIA - India
@SIA_Ind
SIA-India congratulates @AgnikulCosmos to an important player in space sector which won the Space Tech Solutions Category Award. Presented by @startupindia
#nationalstartuoaward2021
#madeinindia -
AgniKul Cosmos
@AgnikulCosmos
Humbled to be the only player in the space sector this year to be winning this.Thanks @startupindia for this recognition. This is strong inspiration to continue building world class products out of India #nationalstartupawards2021 #madeinindiafortheworld #makeinindia @PiyushGoyal
Startup India
@startupindia
āAgnikul Cosmos Private Limitedā bags the Winners award at #nationalstartupawards2021 for Space sector under Space Tech Solutions category recognised by DPIIT.
#startupindia #dpiit #nsa2021
@AgnikulCosmos -
AgniKul Cosmos reposted
PMO India
@PMOIndia
Our Start-ups are changing the rules of the game.
ą¤ą¤øą¤²ą¤æą¤ ą¤®ą„ą¤ मानता ą¤¹ą„ą¤- Start-ups are going to be the backbone of new India: PM @narendramodi -
AgniKul Cosmos
@AgnikulCosmos
Our cofounder, @srinathr155 participated in an interaction with Honāble PM Shri. @narendramodi Ji where the PM emphasised the importance of making solutions for the world, from India @PMOIndia @startupindia @PiyushGoyal #startupindiainnovationweek #startups4newindia #startupindia
-
AgniKul Cosmos
@AgnikulCosmos
Best wishes and heartfelt congratulations from the entire Agnikul crew to Shri. S Somanath Sir for being appointed as Secretary Department of Space and Chairman, Space Commission. We eagerly look forward to working you, Sir. @isro
-
AgniKul Cosmos
@AgnikulCosmos
Agnikulās single piece, fully 3d printed, engine family. Marching towards making 200 rocket engines every year. #makeinindia #madeinindiafortheworld @IITMIC @iitmadras @iitmrp @startup_mission
-
AgniKul Cosmos
@AgnikulCosmos
Happy 2022 to all of you, from all of us at Agnikul. #happynewyear One more orbit done. ā
-
AgniKul Cosmos
@AgnikulCosmos
Focussing on how to assemble Agnibaanās stage 2 ;-) This may take a couple of daysā¦
#madeinindia @IITMIC @iitmadras #madeinindiafortheworld @startup_mission @iitmrp -
AgniKul Cosmos
@AgnikulCosmos
Merry Christmas, everyone š
-
AgniKul Cosmos
@AgnikulCosmos
Was great spending time with the @piventures team at our testing facilities yesterday. Thank you @manish_saarthi and team for your support and trust. @IITMIC @iitmadras
-
AgniKul Cosmos reposted
IIT Madras Incubation Cell
@IITMIC
Indian #spacetech startup @AgnikulCosmos unveiled Agnilet, the worldās first fully 3D printed #rocketengine, to a global audience at International Astronautical Congress, Dubai @IAC2021dubai www.aninews.in/news/business/business/iit-madras-based-stā¦
#startupindia #makeinindia #iitmstartup #deeptech #iac2021 -
AgniKul Cosmos
@AgnikulCosmos
Humbled to be the only Indian space tech player displaying its products at the @SpaceTechExpoEU starting tomorrow in Bremen. Meet us at Hall 4 Booth E20 & we can configure a launch vehicle, just for your launch! #spacetechexpoeu #madeinindia #madeinindiafortheworld
AgniKul Cosmos
@AgnikulCosmos
Eager to meet all of you there. @SpaceTechExpoEU Please stop by Hall 4 Booth E20
-
AgniKul Cosmos
@AgnikulCosmos
-
AgniKul Cosmos reposted
Edd Gent
@EddytheGent
How 3D Printing Can Enable On-Demand Space Launches. Q&A with @moin_spm from @AgnikulCosmos spectrum.ieee.org/3d-printed-rockets-india-agnikul
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to have had the opportunity to interact with IN-SPACe Chairman @GoenkaPk at Agnikulās design & testing facilities @iitmadras - we are excited to work with @isro & #inspace in this journey to orbit. @makeinindia #makeinindiafortheworld #nccrdstartups @IITMIC @iitmrp
-
AgniKul Cosmos reposted
IIT Madras
@iitmadras
@iitmadras incubated startup @AgnikulCosmos is working on the first indigenously developed rocket by collaborating with @ISRO. "We are planning for a test launch by the end of 2022", says @srinathr155, CEO, @AgnikulCosmos
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos reposted
YourStory
@YourStoryCo
āOpening up of the space sector means 3 things around credibility
- more people will join startups
- investors wonāt worry about grey areas in the policy level &
- suppliers are willing to come in & help build the vision,ā says @srinathr155 of @AgnikulCosmos at TechSparks 2021 -
AgniKul Cosmos
@AgnikulCosmos
Humbled to be showcasing our full scale Agnilet engine for the 1st time at @IAC2021dubai @iafastro - Couldnāt have asked for a better stage for this reveal. Fully designed & #madeinindia #iac2021 #iac #designedinindia #madeinindiafortheworld @isro @IITMIC @iitmrp @EOSGmbH
AgniKul Cosmos
@AgnikulCosmos
If you are @IAC2021dubai - please stop by and we can talk about configuring a vehicle to precisely suit your needs. Rockets need not be one-size-fits-all solutions.
-
AgniKul Cosmos
@AgnikulCosmos
So many things have fallen in place to get this far in the journey from Adyar to Orbit - thank you @iitmadras ecosystem,investors, suppliers & customers for this. #trivia :to be in low earth orbit we have to impart 8 km/s of speed to a satellite. Thatās Adyar to Parrys in 1.2 sec
Sindhu Hariharan
@SindhuHarih
Today in #merchantsofmadras, @iitmadras #startup @AgnikulCosmos on testing its systems at #isro..
Will they tweet at @elonmusk abt their 3D-printed engine I ask, and @srinathr155, like a typical #chennai ātrep says heād let the work do the talking
timesofindia.indiatimes.com/city/chennai/to-boldly-go-whe⦠-
AgniKul Cosmos
@AgnikulCosmos
An amazing day at #dubaiexpo2020 - we were lucky to have had a foot fall of 1000+ people just yday at the @startupindia Innovation hub. Crew member @manic1609 explaining why rockets need not be one-piece-fits-all solutions: every satellite is special & deserves a ride of its own!
-
AgniKul Cosmos
@AgnikulCosmos
A long day of testing for the Agnikul crew sometimes ends with just watching that source of light (the moon) in orbit around our planet š . #moon š #inspiration #longday ā Without the moon would we have been so captivated as a species to venture into the skies?
-
AgniKul Cosmos reposted
ET Now Swadesh
@ETNowSwadesh
#agnikulcosmos ą¤ą„ Co-Founder's ą¤øą¤Æą„ą¤Æą¤¦ ą¤Ŗą„ą¤° ą¤®ą„ą¤¹ą¤®ą„मद ą¤ą¤¾ą¤¦ą¤°ą„ ą¤ą¤° ą¤¶ą„ą¤°ą„नाऄ ą¤°ą¤µą¤æą¤ą¤ą¤¦ą„रन ą¤¹ą„ą¤ą¤ą„ ą¤ą¤ ą¤ą„ #swadeshhero
ą¤øą„ą¤¬ą¤¹ 9:15 पर OPENING BELL ą¤¬ą¤ą¤¾ą¤ą¤° ą¤ą¤°ą„ą¤ą¤ą„ ą¤ą¤ ą¤ą„ ą¤ą„ą¤°ą„ą¤” ą¤ą„ ą¤¶ą„ą¤°ą„ą¤ą¤¤
#etnowswadesh @AgnikulCosmos @srinathr155 -
AgniKul Cosmos
@AgnikulCosmos
Join us at @IAC2021dubai at stall H8-44 ā We will figure out and build the best vehicle configuration that works for your payload to go to space. #iac2021 - For appointments please email iac2021@agnikul.in
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to be participating in #dubaiexpo2021 and having the chance to interact with not only senior members & young startups of the Indian space tech community but also so many players from the global space arena @isro #madeinindiafortheworld
Pawan K Goenka
@GoenkaPk
Indian Space Meet in Dubai Expo today at 12:30 India time. If interested in what is happening in Space, do tune in: Joining link: ficcibike.com/indiapavilion/
Password: dubaiexpo@ficcibike.com -
AgniKul Cosmos
@AgnikulCosmos
Indian space as we know it is changing -From launch vehicles to ground systems, every aspect of space is now open to everyone.Thanks @isro @PMOIndia @narendramodi Chairman @isro Chairman InSPACe @GoenkaPk for enabling this. India is setting up to become worldās gateway to space.
Srinath Ravichandran
@srinathr155
Honoured to present our views on new space reforms to Honāble PM Shri @narendramodi ji @PMOIndia @isro @GoenkaPk.From 2016, where people questioned if the Govt. will even support us, to 2021, where we are enabling ~100 engineers to work on space tech:the journey has been humbling
-
AgniKul Cosmos reposted
ETtech
@ETtech
#etstartupawards2021
The Alumni: The previous winners have stood out in a crowded startup ecosystem and gone on to become successful businesses. A look at a few of them.
@FreshworksInc @MyNykaa @AgnikulCosmos
economictimes.indiatimes.com/tech/startups/etsa-alumni-wh⦠-
AgniKul Cosmos
@AgnikulCosmos
Great having @artha_vc team here @showmedamani
Anirudh A Damani
@showmedamani
A day where our grey matter got reactivated.. thanks to the amazing team of @AgnikulCosmos!
#agnikulcosmos #agnikul #arthaventurefund #portfoliocompany #aerospace #tech #india #space @artha_vc @srinathr155 @moin_spm -
AgniKul Cosmos
@AgnikulCosmos
Humbled and elated to be part of this consortium to bring space to everyone. #makeinindiafortheworld #aatmanirbharbharat @IITMIC @iitmadras
IIT Madras
@iitmadras
@iitmadras Pravartak Technologies Foundation led consortium to collaborate with #dronevayu, @AgnikulCosmos, @GalaxEye, #mindgrove, & #resileo to develop technologies for the development & commercialisation of space & deep space.
-
AgniKul Cosmos reposted
Pawan K Goenka
@GoenkaPk
Had an opportunity to interact, thanks to CII, with 11 Private Sector companies in the Space Sector. Received valuable insights including their expectations from INSPACe. Some early-stage cutting edge work being done.
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to sign this MoU with the Dept. of Space which will formally enable us to go forward with our testing plans at ISRO. With this level of Govt. support, low earth orbit does look close #inspace @isro #makeinindiafortheworld @GoenkaPk @PMOIndia @narendramodi @DrJitendraSingh
ISRO
@isro
Department of Space, today, September 17, 2021 entered into a Framework MoU with M/s Agnikul Cosmos Pvt. Ltd., Chennai for access to ISRO facilities and expertise. www.isro.gov.in/update/17-sep-2021/framework-mou-signed-wā¦
-
AgniKul Cosmos reposted
Jagannathan
@v_jagannathan
My latest report
timesofindia.indiatimes.com/companies/indias-rocket-startā¦.
@isro @AgnikulCosmos @SpaceFedIndia @airtelnews -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce our partnership with @EOSgmBH which will allow us to own rocket engine making end-to-end, in-house. More details about this in a blog by our cofounder @srinathr155 link.medium.com/GHUNPGd01ib #aatmanirbharbharat #madeinindia #3dprinting #madeinindiafortheworld
-
AgniKul Cosmos
@AgnikulCosmos
It was a very productive interaction and we look forward to working with #inspace as systems start to officially crystallise to enable and allow private players in India to participate along side and with the support of @isro
ISRO
@isro
Secretary, DOS / Chairman, ISRO interacts with delegates from Industry, Academia & Start-ups
Read:www.isro.gov.in/update/25-aug-2021/secretary-dos-chairman⦠-
AgniKul Cosmos
@AgnikulCosmos
For a curious onlooker, there is nothing that is mundane. One of our crew members - @anandhephaestus writes about why it is important to consciously nurture the child like curiosity within us.
link.medium.com/Wt5re5oeQib
#innovation #startups -
AgniKul Cosmos
@AgnikulCosmos
āAt the stroke of the midnight hour, when the world sleeps, India will awake to life & freedom.ā Jawaharlal Nehru ā These words feel like a launch countdown to the lift off of an entire nation. Honoured to be designing & making Agnibaan in India. #happyindependencedayindia
-
AgniKul Cosmos
@AgnikulCosmos
When meddling with hardware (& being stuck deep in the nuts, bolts & wires of hardware making), it is good to remind oneself of what space exploration truly means. Sharing one of our crew members- Arushi's - "A girlās dream to be multi-planetary" #vision link.medium.com/Ai3x049mhib
-
AgniKul Cosmos
@AgnikulCosmos
Ever so grateful to be a part of the @iitmadras ecosystem. @IITMIC ā- hands down the best support system for deep tech startups!
IIT Madras Incubation Cell
@IITMIC
The June issue of our Newsletter is out, with the latest updates from our startups and ecosystem ! Chk it out at šš¼mailchi.mp/29657c5e7687/iitmic-newsletter-june2021
.
@iitmadras @iitm_respark @htic_s @IITMBio @ICCWIndia @IITMAA @iitm_alumni @paniitindia
.
#startup #iitmstartups #newsletter #startupnews -
AgniKul Cosmos
@AgnikulCosmos
A quick recap of some of the reasons behind our single piece, 3d printed rocket engines by our cofounder & CEO @srinathr155 -- It is an exciting time to be making space tech hardware today!
#3dprinted #makeinindia #aatmanirbharbharat
link.medium.com/Ne6VKM7R3hb -
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce the successful completion of Agnilet's repeatability & performance validation tests. This same hardware has produced the same results in multiple tests, consecutively. Terrific work by the crew @isro
#makeinindia #aatmanirbharbharat
youtu.be/jlx4FkbWuXg -
AgniKul Cosmos reposted
YourStory Tamil
@TamilYourstory
ą®ąÆą®©ąÆą®©ąÆ ą®µą®æą®£ąÆą®µąÆą®³ą®æ ą®øąÆą®ą®¾ą®°ąÆą®ąÆ ஠ப௠Agnikul ą®Øą®æą®±ąÆą®µą®©ą®¤ąÆą®¤ą®æą®²ąÆ ą®ŖąÆą®±ą®æą®Æą®æą®Æą®²ąÆ ą®ąÆą®“ąÆą®ąÆą®ą®³ąÆ ą®µą®“ą®æą®Øą®ą®¤ąÆą®¤ąÆą®®ąÆ ą®ą®³ą®®ąÆ ą®ŖąÆą®£ąÆą®ą®³ąÆ! @iitmadras @AgnikulCosmos
#aerospace #aerospaceengineering #agnikul #womeninpower #womenceo #spacetech #iitmadras #agnikulcosmos #womenpower #space
yourstory.com/tamil/young-women-leading-spactech-pioneers⦠-
AgniKul Cosmos reposted
Chethan Kumar
@Chethan_Dash
India, as part of the ongoing #space reforms, will allow Indian companies to establish and operate their own #launch sites, pads aside from doing missions that involve re-entry: New draft space transport policy reveals. @isro may also partner with firms for future missions.
-
AgniKul Cosmos reposted
anand mahindra
@anandmahindra
These women are at the frontier of Indiaās Space technology. Which makes me even more proud to be one of the investors in @AgnikulCosmos . Onward and upward...There is no glass ceiling when youāre creating the future...
HerStory
@herstoryYS
Meet Uma Maheshwari, Saraniya P, and Arushi Choudhary who lead the engineering and design teams at Agnikul Cosmos, a #spacetech #startup that aims to ābring space within everyoneās reachā.
@AgnikulCosmos @srinathr155 #hspioneers
āļø @rekhabaala
yourstory.com/herstory/2021/06/women-spactech-pioneers-ag⦠-
AgniKul Cosmos
@AgnikulCosmos
Thanks @YourStoryCo @herstoryYS for talking about our women leaders-Here we have 3 exceptionally capable stars who, along with their crews,are enabling us realize our vision of simplifying space access. Grit, Patience & Passion define their journeys of building hardware #herstory
HerStory
@herstoryYS
Meet Uma Maheshwari, Saraniya P, and Arushi Choudhary who lead the engineering and design teams at Agnikul Cosmos, a #spacetech #startup that aims to ābring space within everyoneās reachā.
@AgnikulCosmos @srinathr155 #hspioneers
āļø @rekhabaala
yourstory.com/herstory/2021/06/women-spactech-pioneers-ag⦠-
AgniKul Cosmos reposted
YourStory
@YourStoryCo
Srinath Ravichandran, Co-Founder & CEO, @AgnikulCosmos explains how his team has simplified the journey to space for customers.
Watch the full video here: yourstory.com/video/build-grow-money-matters-season-threeā¦
@srinathr155 @ysmoneymatters @MadanRao @hsbc #hsbcforstartups -
AgniKul Cosmos
@AgnikulCosmos
The most reliable way to beat the #covid19 pandemic is to get vaccinated, practice isolation and practice a healthy lifestyle. Phase 1 #vaccinedrive underway @AgnikulCosmos today! Thank you for making this happen @HospitalsApollo #coronavaccination
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce our Series A round led by @MayfieldFund. Grateful to our existing investors for their continued trust & to the angels for their belief in our vision. A big thanks to @isroās IN-SPACe initiative & our very hardworking crew. DeltaV boost!yourstory.com/2021/05/funding-alert-spacetech-startup-agnā¦
-
AgniKul Cosmos reposted
Forbes India
@ForbesIndia
Podcast: @srinathr155, co-founder and CEO of @AgnikulCosmos, in conversation with @ArakaliHari about the journey that is currently focused on making 3D print rockets to send small satellites into low-earth orbits
www.forbesindia.com/audio/the-startup-fridays-podcast/sta⦠-
AgniKul Cosmos
@AgnikulCosmos
We are temporarily pausing all our liquid oxygen based testing until oxygen supplies stabilise across hospitals in our country. In the meantime, happy to help Covid patients in anyway we can. We are all in this together. #covidemergency2021 #covidsecondwaveinindia #oxygenshortage
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce realization of a 3d printed LOX pump for Agnibaan. It was an unique journey of discovery for the entire crew given the original design & complexity of fab #madeinindia @startupindia @isro youtu.be/NA4-OccHaYM Glad to be playing a role in #aatmanirbharbharat
AgniKul Cosmos
@AgnikulCosmos
@IITMIC @startup_mission @PMOIndia @makeinindia #makeinindiafortheworld Thanks a lot to the Govt. & @isro For #inspace and enabling all of us in India to build original space tech hardware from here. Grateful to our investors for their support & trust. Amazing effort by the crew.
-
AgniKul Cosmos
@AgnikulCosmos
We successfully fired our single piece, fully 3d printed, semicryo Agnilet engine until it reached steady state temperatures. This was done on the same hardware that we tested last month. youtu.be/xLr-8bl6lo4 #madeinindia @isro @narendramodi #madeinindiafortheworld @PMOIndia
AgniKul Cosmos
@AgnikulCosmos
#aatmnirbharbharat #inspace @IITMIC @startup_mission Incredible work by the crew as always! Humbled to do our small parts in complementing the great work that @isro is already doing in making our country self reliant in space tech.
-
AgniKul Cosmos
@AgnikulCosmos
Every orbital rocket launch is about imparting enough energy to make an object go at ~7.5 km/s. The sheer scale of this energy is exhilarating.
-
AgniKul Cosmos
@AgnikulCosmos
We had a lovely afternoon with @MM_Murugappan Sir. His insights on what to expect next as we grow, have always been very useful. Thank you for visiting us, Sir. @SpecialeInvest @visheshrajaram @srinathr155 @moin_spm @satchakra_iitm
M M Murugappan
@MM_Murugappan
Spent a inspiring afternoon at Agnikul Cosmos at their testing centre near Chennai.Great vision of the Founders,a team with passion and purpose.A teacher and mentor in Prof.Satya Chakravarthy Of IITM,Foresight and belief of Vishesh of Special Invest.All doing India proud.
-
AgniKul Cosmos reposted
CNBC-TV18
@CNBCTV18News
"Buying a rocket from us is like buying a laptop, it can be customized & configured," says @srinathr155 co-founder & CEO of @AgnikulCosmos in conversation with @ShereenBhan
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos reposted
Moneycontrol
@moneycontrolcom
Anand Mahindra invests in @IITMadras-incubated space technology startup @AgnikulCosmos.
#spacetech @anandmahindra #investment #startup
www.moneycontrol.com/news/business/anand-mahindra-makes-p⦠-
AgniKul Cosmos reposted
Kiran Mazumdar-Shaw
@kiranshaw
Kudos to Indian #space #startup @AgnikulCosmos as it becomes the worldās first company to successfully test a fully 3D printed rocket engine.Ā www.businessinsider.in/science/space/news/indian-space-stā¦
-
AgniKul Cosmos reposted
anand mahindra
@anandmahindra
AGNIKUL is a startup that will build launch vehicles to carry micro/nano satellites to low earth orbit on demand. They recently test-fired a fully 3D printed semi cryo rocket engine at IIT Madras. Terrific champions of the future. Iāve personally invested in the company
-
AgniKul Cosmos
@AgnikulCosmos
Humbled to announce firing of fully #madeinindia Agnilet - a 100% 3d printed, 1 piece semicryo rocket engine. Compared to older firings this is new:has 0 assembly involved->the entire engine is 1 part. Grateful to @isro for continued support. @narendramodi youtu.be/S1GVGbn4-U4
AgniKul Cosmos
@AgnikulCosmos
Thanks to @iitmadras - without them this would not have been possible. @satchakra_iitm - thank you for bringing us into this fraternity. thanks to @IITMIC @startup_mission and all our investors for their trust. Proud of our incredibly committed & hardworking propulsion crew!
AgniKul Cosmos
@AgnikulCosmos
We took to heart what Honourable Chairman @isro has reiterated about disruptive #madeinindia hardware. Thanks to #inspace @PMOIndia for continued support and encouragement. It is this kind of motivation that pushes us to take that extra step in innovating. #madeinindiafortheworld
-
AgniKul Cosmos
@AgnikulCosmos
Happy #republicday2021
Writing laws that allow people to govern themselves while adhering to values that we can all hold sacred is no easy task. Snapshot from www.india.gov.in -Taking a moment this #republicday to cherish these values & building Agnibaan here #madeinindia -
AgniKul Cosmos
@AgnikulCosmos
Thank you :)
ETStartupAwards
@StartupAwardsET
A heartfelt congratulations to the winner! @AgnikulCosmos @ETNOWlive @Tracxn @IDFCFIRSTBank @ETtech #etstartupawards
-
AgniKul Cosmos reposted
Economic Times
@EconomicTimes
Celebrating the finest startups in India. Watch the finale of #etstartupawards live at 5.30 PM today. www.youtube.com/watch?v=f6DECczr_AY
@PiyushGoyal @PiyushGoyalOffc @OfficeOfRSP @rsprasad @IDFCFIRSTBank @Nithin0dha @harshamjty @bsomaia @generalatlantic -
AgniKul Cosmos
@AgnikulCosmos
Congratulations to all winners of the #etstartupawards. Humbled to be a part of this community. Grateful to be judged the top innovator in 2020. thank you @EconomicTimes. @PiyushGoyal @rsprasad #aatmnirbharbharat A shout out to the super hardworking @AgnikulCosmos crew. You rock!
Piyush Goyal
@PiyushGoyal
Watch The Economic Times Startup Awards 2020 celebrating the best Indian Startups.
These bright enterprises are building innovative solutions & are helping realise PM @NarendraModi ji's vision of making India a Startup hub.
šļø 14 January
š 5:30 PM
š½ļø www.youtube.com/watch?v=f6DECczr_AY -
AgniKul Cosmos
@AgnikulCosmos
A new year. Some new & original #madeinindia space tech hardware. A single piece fully 3d printed rocket engine - Agnilet & a fully 3d printed cryogenic pump #aatmanirbharbharat Thanks to @isro #inspace #madeinindiafortheworld @makeinindia @PMOIndia @DrJitendraSingh @narendramodi
-
AgniKul Cosmos
@AgnikulCosmos
Thank you @EconomicTimes - being judged the Top Innovator means a lot to us : great to be recognised for building fresh space tech here in India with @isro ās support. #madeinindia #madeinindiafortheworld #aatmanirbharbharat #inspace
Economic Times
@EconomicTimes
A toast to the startups that are steps ahead. Register for the ET Startup Awards 2020-21 to know more. economictimes.indiatimes.com/spotlight/etstartupawards_di⦠@SamunnatiFin @AgnikulCosmos @vedantu_learn @Sequoia_India @zerodha @BellatrixAero @gametion @MylabSolutions @Nithin0dha @harshamjty @bsomaia
-
AgniKul Cosmos
@AgnikulCosmos
2020 gave us a pre-Series A, a first of its kind agreement with @isro, strong customer bonds & high quality hardware. Eager to learn, build & make new space tech out of India in 2021. #madeinindiafortheworld #happynewyear2021
Fact: New Years are celebration of orbit completion :) -
AgniKul Cosmos reposted
ETStartupAwards
@StartupAwardsET
Srinath Ravichandran, Co-founder and CEO of Agnikul is Top Innovator at the ET Startup Awards. He believes that success and innovation should always go hand in hand. Catch him live in the finale on Jan 14. #etstartupawards @AgnikulCosmos
-
AgniKul Cosmos
@AgnikulCosmos
Merry Christmas, everyone.
Srinath Ravichandran
@srinathr155
Years ago, when I decided to get professionally into rocketry, I frequently visited a Hobby rocketry community at Maryland & they did Xmas tree launches. I attended the 2016 one youtu.be/alCn-g96b_0 #merrychristmas2020 @mdrocketry Learning : Xmas trees need thrust vectoring:)
-
AgniKul Cosmos
@AgnikulCosmos
A big moment for all of us in the Indian space tech ecosystem. Thank you Honāble Shri. @narendramodi Ji. We are lucky to have been a part of this. Thank you @isro for making this possible. #aatmanirbharbharat #madeinindia #madeinindiafortheworld @IITMIC @startup_mission
ISRO
@isro
Honourable Prime Minister Shri Narendra Modi interacted with space industries, startups and academia today (on December 14, 2020) to encourage their participation in space activities.
For details visit: www.isro.gov.in/update/14-dec-2020/pm-interacts-with-spacā¦
@PMOIndia @narendramodi
#inspace #startups -
AgniKul Cosmos
@AgnikulCosmos
More support from the Honāble PM Shri @narendramodi ji @isro & @PMOIndia, as we were one of the few invited to interact with the PM. With this level of guidance, we are confident that we can make India proud with our #madeinindiafortheworld vehicle @kvijayraghavan #madeinindia
-
AgniKul Cosmos
@AgnikulCosmos
Extremely humbled & elated to be the first company to enter into an agreement with @isro under the newly proposed #inspace entity -Thank you @isro for being @isro @narendramodi @DrJitendraSingh @nsitharaman #madeinindia #aatmanirbharbharat #iitm #madeinindiafortheworld @PMOIndia
ISRO
@isro
Department of Space has entered into a Non Disclosure Agreement (NDA) with M/s Agnikul Cosmos Pvt. Ltd, a Chennai based start-up company on December 03, 2020
#inspace #agnikulcosmos #isro
For details visit: www.isro.gov.in/update/03-dec-2020/non-disclosure-agreemeā¦
AgniKul Cosmos
@AgnikulCosmos
Under the agreement we will be able to work with various @isro centers to get access to information & facilities necessary for our launch vehicle development #space @iitmadras @IITMIC @startup_mission
Thanks to all our mentors & supporters who have enabled us to come this far. -
AgniKul Cosmos
@AgnikulCosmos
Letās get together & do our small parts in making India more self reliant in space tech by working on technology that complements the amazing body of work that @isro has accomplished. #madeinindia #aatmanirbharbharat #madeinindiafortheworld
Srinath Ravichandran
@srinathr155
www.financialexpress.com/industry/sme/into-a-new-orbit-ma⦠Humbled to be opening up doors to space from India @AgnikulCosmos #madeinindiafortheworld #aatmanirbharbharat This is the best time to be doing a space tech startup here. The Govt. is supportive, the markets are ready & access to technology exists.
-
AgniKul Cosmos
@AgnikulCosmos
As a rocket company, we routinely talk pressures of 50 bar, 100 bar etc.
The eye of the #nivarcyclone is at 0.998 bar. The std. pressure at 20 deg C is 1.015 bar. Thatās a difference of just 0.017 bar that is causing 120kmph winds gusting to 150 kmph.
#humbledbynature
Chennai Weather-Raja
@chennaiweather
IMD: #nivar will become Very Severe cyclonic storm and wind speed gusts upto 145 kmph as NTN Coast on high alert. #chennairains
-
AgniKul Cosmos
@AgnikulCosmos
Today, as we celebrate lights & everything that signifies winning over darkness, we @AgnikulCosmos wish you all a very happy Diwali #diwali #diwali2020 āWe feel privileged & lucky to have the opportunity to both play with Diwali rockets & make orbital class rockets, here in India
-
AgniKul Cosmos
@AgnikulCosmos
The stuff that we grew up watching on Doordarshan continues to fascinate and motivate and aim higher and taller than ever. @isro
Srinath Ravichandran
@srinathr155
This is the stuff that propels us. Every lift off is a source of hope, enthusiasm and energy, lifting all our spirits along with the satellite itself. Thank you @isro for being @isro šš½
-
AgniKul Cosmos reposted
-
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Thank you @moulishree_jps @KrASIAofficial for this piece on how the new changes in Indian Space policy is helping space startups. Thank you @isro for opening the skies #madeinindiafortheworld #aatmanirbharbharat We are on the verge of something big here
kr-asia.com/indian-space-tech-startups-moment-to-shine-is⦠-
AgniKul Cosmos reposted
Philip Green OAM
@AusHCIndia
Australia is a proud partner of @iitmadras - we have more joint degree programmes than any other country. Meeting Bhaskar Ramamurthy, Director, and AgniKul Cosmos at the IIT Madras Research Park ā great to see š¦šŗš®š³ in critical tech research! #space
-
AgniKul Cosmos
@AgnikulCosmos
It was an honour to host Australian High Commissioner to India @AusHCIndia The Hon Barry OāFarrell AO -thank you sir, for taking the time to visit & understand what we are building at the National Center for Combustion R&D @iitmadras @AusCGChennai @IITMIC #madeinindiafortheworld
-
AgniKul Cosmos reposted
-
AgniKul Cosmos
@AgnikulCosmos
One could create an entire colour palette with just igniter š„ flames. All our igniters are fully 3d printed and integrated with the single piece engine. #3dprinting #madeinindia @makeinindia @startupindia @IITMIC @startup_mission #madeinindiafortheworld
youtu.be/nwkJWLc0DUs -
AgniKul Cosmos reposted
Plaksha University
@PlakshaUniv
A solution for breast cancer screening. A chatbot for mental health. Orbit class space launch vehicles.
Our trailblazers' panel is truly at the cutting-edge of technology.
They share screen at #infinity2020. Register here: www.plaksha.org/infinity
#reimagineteched -
AgniKul Cosmos
@AgnikulCosmos
We canāt wait to be a cotraveller and fly with @isro ās support. This is great for the entire community here #madeinindia #madeinindiafortheworld @startupindia @makeinindia #inspace
zeenews.india.com/india/indian-private-sector-to-be-co-tr⦠-
AgniKul Cosmos
@AgnikulCosmos
#mahatmagandhiji famously said that we will first have to be the change that we want to see. Remembering his wisdom and message today as we march together as a #aatmanirbharbharat towards progress, prosperity and peace #2ndoctober #fatherofnation #gandhijayanthi2020
-
AgniKul Cosmos
@AgnikulCosmos
It's exactly 1 year since we presented our #madeinindia solution to honourable PM Shri. @narendramodi ji. Today, humbled to take our homegrown product further as a global solution to customers across the world. Thank you, Alaska Aerospace
@isro @nsitharaman @DrJitendraSingh
TOIChennai
@TOIChennai
Chennai space startup Agnikul Cosmos partners with Alaska Aerospace to test its launch vehicle toi.in/Dm0_CY38
AgniKul Cosmos
@AgnikulCosmos
The ability to launch from high latitude launchports is a significant advantage.Thanks:
to #aatmanirbharbharat for enabling startups such as ourselves
to @IITMIC @startup_mission for their mentorship
Grateful to our investors for their relentless support #madeinindiafortheworld
AgniKul Cosmos
@AgnikulCosmos
Thank you akaerospace.com/about-us/
-
AgniKul Cosmos
@AgnikulCosmos
#3dprinting is an equaliser. It lets you iterate hardware at the speed of software. Since 2019, we have realised multiple rocket engines - Hear what @moin_spm has to say
@makeinindia #aatmanirbharbharat #madeinindiafortheworld @IITMIC @startup_mission
www.amchronicle.com/insights/agnikul-cosmos-co-founder-co⦠-
AgniKul Cosmos
@AgnikulCosmos
Listen to our Cofounder and CEO @srinathr155 talk about our founding story & how Agnikul pulled two of its founders to India & how it all came together here, in India š®š³ @moin_spm @satchakra_iitm @IITMIC @startup_mission @airbusbizlab #madeinindiafortheworld #aatmanirbharbharat
Srinath Ravichandran
@srinathr155
Thanks, Vaibhav.
@IITMIC @startup_mission
@AgnikulCosmos & our #madeinindiafortheworld tech wouldnāt be possible without our amazing crew & investors. #aatmanirbharbharat
Spotify: spoti.fi/3kpqY1B
iTunes: podcasts.apple.com/us/podcast/startup-garage/id1509600601
Google: www.google.com/podcasts?feed=aHR0cHM6Ly9hbmNob3IuZm0vcy8x⦠-
AgniKul Cosmos
@AgnikulCosmos
Extremely glad to have this ESA partnership. Thank you @ESABICDarmstadt @host_mi Pouya & Shahrokh for opening up the entire European Small Sat ecosystem for us.
#madeinindia,for the world.@makeinindia @IITMIC @satchakra_iitm @moin_spm @srinathr155 @startup_mission @startupindia
ESA Space Solutions
@Space4Europe
šļø @ESABICDarmstadt #startup @host_mi are celebrating another success!
They've just signed a new brokerage agreement with the Indian #smallsat launcher @AgnikulCosmos
Good luck with your goal to reduce #space mission costs!
Get the full story š
cesah.com/index.php/nachrichten/348-cooperative-times-for⦠-
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
youtu.be/W_2vBVfV7Vk
Got confused with what I saw around 10th minute.
@gareebscientist - @satchakra_iitm heads this awesome center at IITM btw. This is where @AgnikulCosmos came to life. -
AgniKul Cosmos reposted
Vishesh Rajaram
@visheshrajaram
Great to be on #ciispaceconference panel with @isro @CIItechnovation. @SpecialeInvest aim to build technologies of the future for India and in India with @AgnikulCosmos @AstrogateLabs @KawaSpace and YES! BIG BELIEVERS of progressive risk reduction to build tech for the future
Confederation of Indian Industry
@FollowCII
It's a great time for #startups to work towards risk reduction and technological #innovation with opening up of the Sector. ~ @visheshrajaram, Managing Partner Speciale Incept Advisors LLP @SpecialeInvest at #ciispaceconference @isro @CIItechnovation
-
AgniKul Cosmos
@AgnikulCosmos
Glad to be participating at the International Space Conference and Exhibition organised by @FollowCII with support from @isro Please visit us here www.ciihive.in/ExhibitorStallDetails.aspx?EventId=isce&Exā¦
#space
ISRO
@isro
Join us for International Space Conference on "Ushering the New Era for Indian Space Sector" organized from September 15-17.
More details: www.isro.gov.in/international-space-conference-ushering-n⦠-
AgniKul Cosmos reposted
Headstart Hyderabad
@HeadstartHyd
India has the best of both worlds, technology know-how and accessibility to build the product. - Srinath, Agnikul
#spacetech #headstart #spacetech #startupsaturday #isro #agnikul -
AgniKul Cosmos reposted
SpaceFed India
@SpaceFedIndia
Watch us live tomorrow as we present consolidated sets of points to accelerate the growth of Indian space ecosystem.
#newspaceindia #atmanirbharbharat
#atmanirbharspace #isro
youtu.be/FMmegTVE05M -
AgniKul Cosmos
@AgnikulCosmos
#happyteachersday2020 #happyteachersday to our teachers, our mentors @IITMIC Thankful that we operate out of @iitmadras - a place of learning. Our name āAgnikulā means we are a Gurukul for learning & using fire - one of the most ancient arts humans mastered. #lifelonglearning
-
AgniKul Cosmos reposted
CNBC-AWAAZ
@CNBC_Awaaz
#live | #awaazentrepreneur | Nano Satellites ą¤øą„ ą¤²ą„ą¤ą¤° ą¤°ą„ą¤ą„ą¤ ą¤¬ą¤æą¤²ą„ą¤”ą¤æą¤ą¤ SpaceTech ą¤®ą„ą¤ बढ़ रहा ą¤¹ą„ą¤ ą¤ą¤¾ą¤°ą¤¤ ą¤ą¤¾ ą¤¦ą¤¬ą¤¦ą¤¬ą¤¾ą„¤ą¤¦ą„ą¤¶ ą¤ą„ ą¤øą„ą¤Ŗą„स ą¤Ŗą„ą¤°ą„ą¤ą„राम ą¤ą„ ą¤ą¤ą¤ą„ ą¤ą¤”़ान ą¤®ą„ą¤ #startups ą¤ą„ ą¤¬ą¤¢ą¤¼ą¤¤ą„ ą¤Æą„ą¤ą¤¦ą¤¾ą¤Ø पर @AEHarshada ą¤ą„ ą¤ą¤¼ą¤¾ą¤ø ą¤ą¤°ą„ą¤ą¤¾ @pixxelspace @awaisahmedna @srinathr155 @agnikulcos www.pscp.tv/w/ciGkfjFQbUVxWHllVmFQam98MWxEeEx5YVJEcFlLbbsā¦
-
AgniKul Cosmos
@AgnikulCosmos
Thank you @TiEcon - this is some recognition by @tiesv #tie50 Super humbled & honoured to make a mark in Silicon Valley through our homegrown Agnibaan.
Made in India, for the world! @makeinindia Icing on the cake -to have made it to top 10 :) @TiEChennai
www.thenfapost.com/2020/09/04/chennai-startups-conferred-⦠-
AgniKul Cosmos
@AgnikulCosmos
Got a chance to pitch to @TimDraper ! An amazing opportunity! Thank you. @TiEChennai @TiEcon #tie50 @tiesv
Priya Rajan
@PriyaRangarajan
Go @AgnikulCosmos Srinath and team! So proud of you guys. @TiEcon #tie50 #chennaites #spacetech š @tiesv
-
AgniKul Cosmos
@AgnikulCosmos
Yay! We won! As a top innovator!Thanks @ETtech . Our vehicle is a āMade in India, for the worldā solution & will complement @isro ās current toolkit in rocketry. Thanks to all our investors & supporters. @IITMIC @startup_mission @makeinindia @startupindia tech.economictimes.indiatimes.com/news/startups/et-startuā¦
AgniKul Cosmos
@AgnikulCosmos
So, what is this innovation? For those who are curious, here is some info that will be coming in a series of blogs. link.medium.com/UFBdNHNHc9
-
AgniKul Cosmos
@AgnikulCosmos
An epic photo from Nov 2019. ALWAYS an inspiration @SpaceX www.instagram.com/p/CEKMQ2unT_u/
#inspiration -
AgniKul Cosmos reposted
MOIN SPM
@moin_spm
@srinathr155 will be live soon on ISROās Webinar. He would be speaking on behalf of @AgnikulCosmos . Proud moment for us š®š³
ISRO
@isro
#webinar on "Unlocking India's Potential in Space Sector" will begin at 11:00 hrs IST today
Join us for watching it live on
ISRO Website: www.isro.gov.in/update-webinar-unlocking-of-indiaās-potenā¦
YouTube ISRO official Channel: www.youtube.com/channel/UCw5hEVOTfz_AfzsNFWyNlNg -
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Thanks to @isro for giving me the opportunity to share my views in the webinar on behalf of @AgnikulCosmos
-
AgniKul Cosmos
@AgnikulCosmos
Thank you. We couldnāt be more excited šš¼
-
AgniKul Cosmos
@AgnikulCosmos
Agnikul is now listed on European Space Agency supported launch aggregator @host_mi - Allows us to be a true "Made in India, for the world" solution for launch services. Thanks to a highly configurable design & thanks @host_mi ! @makeinindia @startupindia medium.com/agnikuls-blog/agnikul-partners-with-hostmi-to-ā¦
-
AgniKul Cosmos
@AgnikulCosmos
Proud to bear the Indian flag on our vehicle. We are building tech that will add to Indiaās pride & will make us all feel #aatmanirbhar @makeinindia @startupindia @IITMIC @startup_mission Grateful to our investors for making this possible from India.#happyindependencedayindia2020
-
AgniKul Cosmos
@AgnikulCosmos
Elated to be recognised as a top innovator by @EconomicTimes Proud to be carrying forward the true spirit of @makeinindia & #aatmanirbharbharat @IITMIC @startupindia @iitmadras @startup_mission Thanks to our team, our advisors & investors for enabling us tech.economictimes.indiatimes.com/news/startups/et-startuā¦
AgniKul Cosmos
@AgnikulCosmos
One year anniversary this week since we realised our first single piece, fully 3d printed rocket engine. Timing for this recognition could not have been better. #3dprinting is magic!
-
AgniKul Cosmos
@AgnikulCosmos
And just like that a water tank flies.
SpaceX
@SpaceX
Starship takes flight
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Thanks a lot @showmedamani
Anirudh A Damani
@showmedamani
Episode IX of #damanitalks with @srinathr155, co-founder of @AgnikulCosmos is out on @Spotify and @Apple Podcasts!
Spotify: open.spotify.com/episode/0jcl7H2gPNhbIaOsKY5QiZ
Apple Podcasts: podcasts.apple.com/in/podcast/episode-ix-srinath-ravichanā¦
#podcast #entrepreneur #founder #startups #earlystage #investment #space #isro #incubate -
AgniKul Cosmos
@AgnikulCosmos
Working with hardware with a mask on is not the most comfortable thing in the world. Cheers to the hardware team for keeping at it. šš¼šš½
-
AgniKul Cosmos
@AgnikulCosmos
This looks so fast compared to the usual camera angle of seeing lift off from a distance.
ULA
@ulalaunch
Rocket Cam! šš¹ #atlasv Mars 2020
Watch the full version on YouTube: youtu.be/NAkEOHhYuSoThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Thank you @isro
šš½ m.timesofindia.com/india/isro-will-allow-private-sector-t⦠-
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Enjoyed sharing the story. Thank you @showmedamani @artha_vc
-
AgniKul Cosmos reposted
NASA
@NASA
LIVE NOW: The #countdowntomars begins.
We are launching a historic mission to the Red Planet. Tune in to watch @NASAPersevere liftoff and begin her mission to search for signs of ancient life on another world: x.com/i/broadcasts/1RDGlrkoEzNxL -
AgniKul Cosmos
@AgnikulCosmos
-
AgniKul Cosmos
@AgnikulCosmos
So many Mars missions. Feels like we were literally eagerly waiting for the planets to align to get going. #mars2020 #tianwen1 #hopeprobemission
-
AgniKul Cosmos
@AgnikulCosmos
Until a few months ago, reusable first stage landings were the most fun to watch...
-
AgniKul Cosmos
@AgnikulCosmos
New normal. New life. New look. Website v2.0 is live. Note: it is showing Agnibaan version 2.1.x. If the vehicle changes slightly over the coming months, it means we are iterating ;-) But, the story will be the same - easy, affordable, quick launches.
www.agnikul.in -
AgniKul Cosmos reposted
Leaf Space
@leaf_space
Excited to announce our official partnership with Agnikul, a company building an affordable, nimble launch vehicle. Under the MoU that we signed, we will be supporting Agnikul in the provision of ground segment services.
Find out more here!
leaf.space/2020/07/16/mou_leafspace_agnikul_2020/ -
AgniKul Cosmos
@AgnikulCosmos
We are super excited to announce our official partnership with Leaf Space, a service provider of customized ground segment solutions. @leaf_space Thank you! All of this means easier access to space. (Full message from us is in the snapshot here.) #launchanywhere #launchondemand
-
AgniKul Cosmos
@AgnikulCosmos
Ever so grateful to the Govt and the DoS for the IN-SPACe announcement. šš½
The New Indian Express
@NewIndianXpress
Agnibaan, India's first private small satellite rocket being built by Chennai based start-up Agnikul Cosmos, will be seeking ISRO's help for conducting tests.
@Krish_TNIE @xpresstn @iitmadras @AgnikulCosmos @isro
www.newindianexpress.com/cities/chennai/2020/jun/30/chenn⦠-
AgniKul Cosmos reposted
Business Insider Indiaš®š³
@BiIndia
Indian start-up is building a three-stage rocket that could be ready to launch by 2022
www.businessinsider.in/science/space/news/indian-start-upā¦
@AgnikulCosmos -
AgniKul Cosmos
@AgnikulCosmos
Absolutely amazing! We could sense a certain impatience in wanting to help & enable startups when the Chairman said startups need not wait for the official formation of IN-SPACe & that we could already write to the Department of Space @makeinindia @isro @startupindia Epic! Truly.
ISRO
@isro
Watch Live: Address by Secretary, DOS/Chairman, ISRO www.pscp.tv/w/ccLXDTFQWEtkcGtnTVd5S2V8MW1yeG1FWE5ld3p4efvā¦
-
AgniKul Cosmos
@AgnikulCosmos
Google meet handled 49 Agnikul crew members (most of them on video, most of the time) quite well today. š§š¾āš»š©š¾āš» #googlemeet
-
AgniKul Cosmos
@AgnikulCosmos
When hardware development is as fast as the rocket itself...
RGV Aerial Photography
@RGVaerialphotos
I spot more nose cones inside the onion tent.
#spacex #bocachica #starship @elonmusk @SpaceX -
AgniKul Cosmos
@AgnikulCosmos
One way to teach relative motion is this video. Amazing perspective.
-
AgniKul Cosmos
@AgnikulCosmos
We live in amazing times. :-)
-
AgniKul Cosmos
@AgnikulCosmos
šš½šš¼
YourStory
@YourStoryCo
'Today we made it possible for startups to partner with ISRO,' says FM @nsitharaman while speaking about the steps taken to help private firms & startups leverage @ISRO's facilities to build satellites and rockets.|
WATCH: yourstory.com/2020/05/exclusive-finance-minister-nirmala-ā¦
@SharmaShradha @nsitharamanoffcThis media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
Aerospace continues to remind us that we are a part of nature and we will always be at the mercy of nature.
-
AgniKul Cosmos
@AgnikulCosmos
Skies just opened up in a BIG way for space tech in India š®š³ š. @PIB_India #aatmanirbhareconomy @makeinindia #isro @startupindia
PIB India
@PIB_India
Boosting private participation in Space activities: Govt. to provide predictable policy and regulatory environment to private players
#aatmanirbhareconomy in Space Sector -
AgniKul Cosmos
@AgnikulCosmos
#earthday2020 -why did we start Agnikul: Going to space shouldnāt be the hardest part of living & thriving in space. Ok. But, why space? Comm. GPS. Weather. Yes. Of course, there is money to be made. But beyond that, space opens up in us, a perspective like no other, about Earth.
-
AgniKul Cosmos
@AgnikulCosmos
Jupiter is art. Earth is art too. But Jupiter is modern art. Thanks to @NASAJuno for introducing us to space art.
NASA's Juno Mission
@NASAJuno
What I saw on my last close pass by Jupiter on April 10: the complex topography of the planetās cloud tops. Details at: www.missionjuno.swri.edu/news/churning_texture_in_jupiterā¦
šø Image processed by Kevin M. Gill -
AgniKul Cosmos
@AgnikulCosmos
Speaking about clusters...
Anatoly Zak
@RussianSpaceWeb
...and another dazzling shot of the 28-nozzle RD-107/108 engine combo firing at today's #soyuzms16 liftoff: www.russianspaceweb.com
-
AgniKul Cosmos
@AgnikulCosmos
#9pm9minute #9ą¤¬ą¤ą„9मिनठsome pictures shared by the team. Usually we see only igniter or engine firing pictures getting shared :-)
-
AgniKul Cosmos
@AgnikulCosmos
There is no dearth of inspiration for rocket lovers these days.
-
AgniKul Cosmos reposted
Inc42
@Inc42
With the #covid19 pandemic impacting the growth fo businesses, some sectors witnessed a massive growth during these times.
Here's our list of #30startupstowatch out for in 2020:-
inc42.com/features/30-startups-to-watch-the-startups-that⦠-
AgniKul Cosmos
@AgnikulCosmos
Wow. Lovely to watch.
Rocket Rundown
@RocketRundown
An interesting closeup look at a SpaceX Falcon 9 booster during the last few second before touchdown. The footage is from the CRS-18 mission in July 2019. Credit: @SpaceX/NASA
-
AgniKul Cosmos
@AgnikulCosmos
This is simply the most important piece of advice any engineering company can get. LOVE IT.
-
AgniKul Cosmos
@AgnikulCosmos
This dress code is not new to Agnikul, this situation is though! This pic is from 6 months ago. Who would have thought this is now a need for many folks across the world. #stayhomestaysafe
-
AgniKul Cosmos reposted
CNBC-TV18
@CNBCTV18News
#startupstreet | @AgnikulCosmos raises ā¹23.4 cr; We take stock of COVID-19 impact on Telemedicine biz; Even as co-working spaces see a drop in footfall, sec is witnessing demand from large cos looking for smaller spaces www.pscp.tv/w/cUITMTFvTlFsTFpsT29XUXd8MWRqeFhRWE5kWWRLWieā¦
-
AgniKul Cosmos
@AgnikulCosmos
DeltaV boost! Ever so thankful to @piventures @SpecialeInvest @letsventurein @artha_vc @CIIEIndia #lionrock @Globevestor for believing in Agnikul and it's vision.
Thank you - @IITMIC @airbusbizlab @startup_mission for your mentorship.
yourstory.com/2020/03/funding-alert-spacetech-startup-agn⦠-
AgniKul Cosmos
@AgnikulCosmos
A standard in abort also!
-
AgniKul Cosmos reposted
-
AgniKul Cosmos
@AgnikulCosmos
Rings of fire - combustion engineering is about putting numbers to art.
-
AgniKul Cosmos reposted
-
AgniKul Cosmos
@AgnikulCosmos
A disappointing day for space tech. ā¹ļø
NSF - NASASpaceflight.com
@NASASpaceflight
RIP Starship SN1
@SpacePadreIsle
www.youtube.com/watch?v=rCnl4IZOPe0
and
@LabPadre clips:
www.youtube.com/watch?v=4IypiAjgWlM -
AgniKul Cosmos reposted
NASA Langley Research Center
@NASALangley
We're fired up for #artemis! š„ #icymi: Yesterday, we successfully tested @NASA_Orion's attitude control motor with @northropgrumman. The 30-second hot fire was the final test to qualify the motor for human missions, beginning with Artemis II. Details: www.nasa.gov/missions/artemis/orion/fired-up-final-test-oā¦
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
In this version, the dot is no longer pale @NASAVoyager @NASAJPL making the image and the message all the more starker.
NASA Goddard
@NASAGoddard
"Look again at that dot. That's here. That's home. That's us." āCarl Sagan š
For today's 30th anniversary of one of the most iconic views of Earth ever captured, @NASAJPL released a new version of the image captured by @NASAVoyager: Pale Blue Dot.
More: svs.gsfc.nasa.gov/13544 -
AgniKul Cosmos
@AgnikulCosmos
@DefExpoIndia @IITMIC @startup_mission - Agnikul is proud to be at the #defexpo2020
AgniKul Cosmos
@AgnikulCosmos
Thanks a ton to @edichennaitn for hosting us.
-
AgniKul Cosmos
@AgnikulCosmos
#gstc in Singapore has gotten off to great start. Happy to be a part of this.
-
AgniKul Cosmos
@AgnikulCosmos
The best job descriptions read this way and just this much. ā¤ļø
-
AgniKul Cosmos
@AgnikulCosmos
Day after day, darkness blossoms into light & light again fades into darkness. In what seems like incessant monotony, there is dynamism - ever changing & eternal. Is there anything that gives perspective as vividly as space does? All we need to do: go up & look back. At ourselves
Wonder of Science
@wonderofscience
A day passing on planet Earth captured from a distance of 36,000 kilometers (22,000 miles) by the Japanese weather satellite Himawari-8
-
AgniKul Cosmos
@AgnikulCosmos
Thanks to @startup_mission @ictakerala for giving us the opportunity to talk about what is new at Agnikul #edge2020 #ksum #thespacetechnologyconclave
-
AgniKul Cosmos
@AgnikulCosmos
Guess the material?
AgniKul Cosmos
@AgnikulCosmos
It only has hydrogen and oxygen In it.
-
AgniKul Cosmos
@AgnikulCosmos
Tests involving cryogenics, test your patience too
-
AgniKul Cosmos
@AgnikulCosmos
When 200kg can be made to feel like 200 grams... you know the power of a crane.
-
AgniKul Cosmos
@AgnikulCosmos
Inch by inch, kg by kg, the journey simply incessantly continues. #inspiration
-
AgniKul Cosmos
@AgnikulCosmos
3d printing is magic. It allows us to use phrases such as āunearthing an engineā
-
AgniKul Cosmos
@AgnikulCosmos
Extremely glad that Honourable Former Chairman of ISRO, Dr. A S Kiran Kumar found time to visit us. It is an honour, sir.
-
AgniKul Cosmos
@AgnikulCosmos
Perspective. Thatās all it takes most of the times.
-
AgniKul Cosmos
@AgnikulCosmos
2019 was phenomenal. We grew from a team of 10+ to 40+, made major headways on all aspects of vehicle design, realised difficult hardware, raised seed round funding, forged meaningful relationships with customers & onboarded some truly inspiring advisors. Canāt wait for 2020!
-
AgniKul Cosmos reposted
Dr. Buzz Aldrin
@TheRealBuzz
2020 will be a groundbreaking year in space!
š@SpaceX & @Boeing expect to launch their first @NASA astronauts into space with @Commercial_Crew!
š“Three different Mars rovers are set to launch this summer!
šWe'll be one step closer to launching on the Moon!
I can't wait! -
AgniKul Cosmos
@AgnikulCosmos
Dinner after hot fire testing is way too satisfying, even if it is at midnight. Our 57thš„hot fireš„ attempt as a company. Hard work by the testing crew.
-
AgniKul Cosmos
@AgnikulCosmos
#solareclipse2019
Location: Malappuram
Time: 9:30 AM Indian time
Photo credit : @harimankada
Event credit : Sun, moon, earth...? ;-) -
AgniKul Cosmos
@AgnikulCosmos
663 orbits the moon has completed around earth in these 51 earth-years. Gravity wells can keep things notoriously monotonous.
Sarah Cruddas
@sarahcruddas
Happy 51st Birthday to the photograph that forever changed the way we viewed the world.
Earthrise.
December 24 1968. -
AgniKul Cosmos
@AgnikulCosmos
engine firing / thruster firing gets a lot of attention. But everything matters in a vehicle / spacecraft. (dead-band size tells you when to be in tight control and when to go easy)
-
AgniKul Cosmos
@AgnikulCosmos
Is there some sort of a keeper of world records for destructive testing?
Everyday Astronaut
@Erdayastronaut
Starship: Iām gonna blow my top in an epic way during my pressure test
SLS: Hold my beer...
(Should be noted this was an intentional test till failure) -
AgniKul Cosmos reposted
DCUBED
@DCUBEDspace
Awesome to team up with #newspace #launcher @AgnikulCosmos on bringing our Mechanisms and Deployables to #space at #spacetechexpo
-
AgniKul Cosmos
@AgnikulCosmos
Great to be at @SpaceTechExpoEU Customers. Suppliers. Startups. Large firms. Everyone is here.
-
AgniKul Cosmos
@AgnikulCosmos
Canāt wait for the opening tomorrow.
Space Tech Expo Europe
@SpaceTechExpoEU
Set up is go go go for tomorrowās opening day! Register for free in the link in our bio. #spacetechexpo š
-
AgniKul Cosmos
@AgnikulCosmos
Screw threads and 3D printing : a love-hate relationship indeed.
-
AgniKul Cosmos
@AgnikulCosmos
āThank you for making the world dreamā - thatās exactly what we should thank them for. Yes, and of course for steadily converting dreams to reality.
Lex Fridman
@lexfridman
The pale blue dot and beyond... Thank you to @elonmusk and the SpaceX, Tesla, Neuralink teams for making the world dream. Full conversation: www.youtube.com/watch?v=smK9dgdTl40
This media couldn't be displayed. See it on the original post. -
AgniKul Cosmos
@AgnikulCosmos
www.reddit.com/r/ISRO/comments/dr6qyl/agnikul_aerospace_fā¦
Someone in the team noticed this brewing on #reddit
To clarify - this is a test we did to validate one of our injector iterations a while ago. This is too big a thrust level, too high a mass flow rate and too much cooling for an igniter test! #enginetest -
AgniKul Cosmos
@AgnikulCosmos
Another day. Another 100% 3D printed engine. #3dprinting @makeinindia @startupindia injectors. Igniters. Cooling channels and more. As usual - all in one piece. 3D printing continues to amaze us. Letās now find 6 differences between these two engines? @IITMIC #nccrd
-
AgniKul Cosmos reposted
First Cheque
@firstcheque
Indian Startups to š- Space Tech Edition
@BellatrixAero
Astrogate Labs
@AgnikulCosmos
@TeamIndus
@KawaSpace
@DhruvaSpace
@pixxelspace
Who did we miss out on?
Also, If you are building a Space Tech startup in India, slide into our DMsšØ -
AgniKul Cosmos
@AgnikulCosmos
Great to know that funds such as @piventures here, in India, are excited by #deeptechbeyonddigital
youtu.be/ru2NIQK1PmA
(1:40 for an @AgnikulCosmos mention)First steps towards making us a truly #makeinindia nation #hardware
@makeinindia @startupindia @manish_saarthi @IITMIC -
AgniKul Cosmos
@AgnikulCosmos
Even Diwali rockets actually use rocket science. If it is science used in flying a system that produces thrust by expelling hot gases it is ārocket scienceā #happydiwali2019
Srinath Ravichandran
@srinathr155
In India, we are introduced to flying (diwali) rockets even as a kid. The "launchpad" is a bottle. We are taught to a) worry about where the "gravity turn" would take the rocket, b) plan for aerodynamics, c) quick ignition d)safety. Grateful to be doing this at @AgnikulCosmos now
-
AgniKul Cosmos
@AgnikulCosmos
We donāt get to appreciate how big the falcon 9 booster really is until you stand next to it. Thank you @SpaceX for being an infinite source of inspiration. Thank you @FollowCII @IndianEmbassyUS
-
AgniKul Cosmos reposted
Confederation of Indian Industry
@FollowCII
CII & @USIBC hosted a #usindiašŗšøš®š³ Commercial Space Dialogue for CII's first #spacetech delegation in #washingtondc on 21 October. The discussion focused on building #technology-based co-development partnership opportunities for US and Indian companies. @IndianEmbassyUS
-
AgniKul Cosmos
@AgnikulCosmos
Kick starting the week at Washington DC in what is a very important week in US for Space - #iac2019 and @FollowCIIās Indian delegation visit to US. @IAC2019DC
-
AgniKul Cosmos
@AgnikulCosmos
Agnikul crew at work on the LOX line for the engine ā While working on LOX plumbing, safety is the governing variable. #safetyfirst #lox #rocketbuilding
-
AgniKul Cosmos
@AgnikulCosmos
Matching uncharted waters with unexplored horizons.
UK Space Agency
@spacegovuk
"It's not easy to see an object, even one as large as a great whale, from several hundred kilometres up in space, but the international team believes the capability of modern satellites now makes this a practical task."
š -
AgniKul Cosmos
@AgnikulCosmos
So many languages to connect, appreciate and be close to nature and energy itself. šš½
Srinath Ravichandran
@srinathr155
Deeper the engineering, stronger the similarities between a) taking a treacherous hike on a mountain (#mtwhitney) and b) designing & building complex engineering products (@AgnikulCosmos ). Both are conversations with nature & both teach me how much we are at the mercy of nature.
-
AgniKul Cosmos reposted
EDII-TN
@edichennaitn
EDII-TN Startup showcase - Day 2 @pyconindia 2019. Meet us at stall G9 to know about #tn_startup_policy @AgnikulCosmos & @formxapp
-
AgniKul Cosmos
@AgnikulCosmos
Thank you @edichennaitn
EDII-TN
@edichennaitn
Happy to host @AgnikulCosmos and #accolades in the EDII-TN Startup Showcase at @pyconindia 2019. #edii #pycon19 #chennai #conference
-
AgniKul Cosmos
@AgnikulCosmos
Launch anywhere.
BryceTech
@_BryceTech
Orbital and Suborbital Launch Sites of the World: brycetech.com/downloads/Bryce_Launch_Sites_2019.pdf #space #launch
-
AgniKul Cosmos reposted
ET SME
@ET_RISE
These enterprises are working on a variety of solutions to make payloads and launches more economical, and to improve communications. #startups #space @AgnikulCosmos economictimes.indiatimes.com/small-biz/startups/features/ā¦
-
AgniKul Cosmos
@AgnikulCosmos
LEO, we are coming.
Srinath Ravichandran
@srinathr155
Glad and feeling lucky to be doing some real breakthrough engineering with the @AgnikulCosmos team, here, in India š®š³ timesofindia.indiatimes.com/companies/demand-for-smaller-ā¦
š°š
@IITMIC @makeinindia @SpecialeInvest @TiEChennai -
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Sincerely thank @IITMIC and @iitmadras for this amazing opportunity - I got to talk about @AgnikulCosmos and itās 3d printed engines to none other than Shri @narendramodi ji himself. Humbled and honored. šš¼@makeinindia @PMOIndia
-
AgniKul Cosmos
@AgnikulCosmos
Does inspiration get any taller?
-
AgniKul Cosmos reposted
donnie piercey ā¾
@mrpiercEy
The entire Apollo 11 computer code is available on @github, and it's incredible:
github.com/chrislgarry/Apollo-11
#edchat #apollo11 -
AgniKul Cosmos
@AgnikulCosmos
Satellite manufacturing is going mainstream
BryceTech
@_BryceTech
Satellite manufacturing increased 26% in 2018. Download the State of the Satellite Industry report produced for @SIA_satellite. brycetech.com/downloads/SSIR-2019-2-pager.pdf
#data #satellites #space #report -
AgniKul Cosmos
@AgnikulCosmos
When is the moon itself coming into VR? @scapicxr
Speciale Invest - TheDeepTechVC
@SpecialeInvest
šš°
Chandrayaan - 2's Vikram Lander, built on Scapic's platform. #isroweareproudofyou @scapicxr @AgnikulCosmos @KawaSpace
scapic.com/@scapic/vikram_lander_chandrayaan_2-czsqH -
AgniKul Cosmos
@AgnikulCosmos
Igniters, injectors, cooling channels, nozzle, mounts, ... name it and it is here. A 100% 3D printed, flightworthy semi cryo engine is here! 1000s of components reduced to 1 component. 3D printing is magic!
#fully3dprinted @makeinindia @startupindia @IITMIC -
AgniKul Cosmos
@AgnikulCosmos
The moon is now a stoneās throw away... sort of.
ISRO
@isro
#isro
Vikram Lander Successfully separates from #chandrayaan2 Orbiter today (September 02, 2019) at 1315 hrs IST.
For details please visit www.isro.gov.in/update/02-sep-2019/chandrayaan-2-update-v⦠-
AgniKul Cosmos
@AgnikulCosmos
Some real fun starts from tomorrow...
ISRO
@isro
#isro
The final and fifth Lunar bound orbit maneuver for Chandrayaan-2 spacecraft was performed successfully today (September 01, 2019) at 1821 hrs IST.
For details please visit www.isro.gov.in/update/01-sep-2019/chandrayaan-2-update-f⦠-
AgniKul Cosmos reposted
IIT Madras Incubation Cell
@IITMIC
It was a privilege to partner with @TiEChennai for #startupyaan, an event curated by TiE & IITM startup ecosystem to promote entrepreneurship in Space Tech and allied sectors. @iitmadras @iitm_alumni @startupindia
@AgnikulCosmos @fabheads #spacetech -
AgniKul Cosmos reposted
MOIN SPM
@moin_spm
Amazing to see investors taking up space investments in India @accelindia @SpecialeInvest @3one4Capital @ventureindia #spigroup
-
AgniKul Cosmos reposted
Speciale Invest - TheDeepTechVC
@SpecialeInvest
#deeptech ecosystem is evolving and glad to see the support for #spacetech.
TiE Chennai
@TiEChennai
The #1 SpaceTech conference #startupyaan powered by @edichennaitn
This is a platform for #space companies to hear from industry leaders , #investors and #topstartups
STAY TUNED FOR MORE UPDATES -
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Had the opportunity to talk about the problems that small satellites have today in #startupyaan
@agnikulcosmos @iitmic @tiechennai -
AgniKul Cosmos reposted
MOIN SPM
@moin_spm
Space industry is brewing in our country, happy to be a part of this @TiEChennai @IITMIC #startupyaan @AgnikulCosmos
-
AgniKul Cosmos reposted
TiE Chennai
@TiEChennai
Dr. Somanath Director #vikramsarabhaispacecentre says : #india has ability to develop #rockets with low capital requirements (1/10 of what others are spending) .
#startupyaan powered by @edichennaitn -
AgniKul Cosmos reposted
TiE Chennai
@TiEChennai
Dr.Somanath says #reusable rockets are one of the top innovations in current #space industry and @SpaceX has brought a game-changer in #spacetech .
#startupyaan #space #isro -
AgniKul Cosmos reposted
TiE Chennai
@TiEChennai
The #1 SpaceTech conference #startupyaan powered by @edichennaitn
This is a platform for #space companies to hear from industry leaders , #investors and #topstartups
STAY TUNED FOR MORE UPDATES -
AgniKul Cosmos reposted
TiE Chennai
@TiEChennai
Register Now :hub.tie.org/e/startup-yaan--the-indian-space-startup-ecosā¦
@TiEChennai in association with National Centre for Combustion Research & Development and @IITMadras present #startupyaan, #tn's first ever #space conference, with lots opportunities for startups in #spacetech ,#deeptech -
AgniKul Cosmos
@AgnikulCosmos
Bye bye, home planet.
ISRO
@isro
#isro
Trans Lunar Insertion (TLI) maneuver was performed today (August 14, 2019) at 0221 hrs IST as planned.
For details please see www.isro.gov.in/update/14-aug-2019/chandrayaan-2-successfā¦
Here's the view of Control Centre at ISTRAC, Bengaluru -
AgniKul Cosmos reposted
ISRO
@isro
#isro
Trans Lunar Insertion (TLI) maneuver was performed today (August 14, 2019) at 0221 hrs IST as planned.
For details please see www.isro.gov.in/update/14-aug-2019/chandrayaan-2-successfā¦
Here's the view of Control Centre at ISTRAC, Bengaluru -
AgniKul Cosmos
@AgnikulCosmos
#vikramsarabhai must have known what it means to create & grow a space startup in India. :) @isro @makeinindia @startupindia
-
AgniKul Cosmos
@AgnikulCosmos
All it needs is some additional deltaV.
Coming. Soon-ish.
Dr. Malcolm Davis šŗš¦šŗš¦šŗš¦
@Dr_M_Davis
One of the most useful infographics I've seen on explaining the value of the lunar high ground - Cislunar space. This is the next frontier for human exploration in space, and it makes far more sense than a Mars first approach. Thanks @SpcPlcyOnline
-
AgniKul Cosmos reposted
Lockheed Martin India
@LMIndiaNews
Co-Founders of @AgnikulCosmos put forward their experiences of being a part of the @iigp2 @India_iDEX #startup Conference, sharing the opportunities it presents to the start-ups to connect with Indian as well as global suppliers under one roof. @startupindia #throwbackthursday
-
AgniKul Cosmos
@AgnikulCosmos
We are @SmallSat with @SpecialeInvest in Logan, Utah - getting a real taste of what it means to make small launch vehicles for small sats around the world.
#smallsat2019
#makeinindiafortheworld
@makeinindia @startupindia @IITMIC @DIPPGOI
AgniKul Cosmos
@AgnikulCosmos
-
AgniKul Cosmos
@AgnikulCosmos
Indeed.
Arun Natarajan
@arunontw
#saas #deeptech @iitmadras apart from pioneering #product #entrepreneurs are taking #chennai to next level. @svembu @mrgirish @Umesh_Sachdev @sureshsambandam @ArunUnmukt
@MadStreetDen @angelschennai @KeiretsuIndia @chandunair @dorait @TiEChennai ššš
m.economictimes.com/tech/software/chennai-is-the-new-hotb⦠-
AgniKul Cosmos reposted
athira a nair
@aiharla
Why investors are making a beeline for #keralaās burgeoning #startup ecosystem - @Appurvaa_ finds out.
In fact, startups in Kerala are not only attracting investor attention, but are also building #technology that is solving real problems for #india. -
AgniKul Cosmos reposted
-
AgniKul Cosmos reposted
Speciale Invest - TheDeepTechVC
@SpecialeInvest
Of course @AgnikulCosmos will also take #microsatellites #nanosatellites to the space. Just saying :)
@ReginaDulanjali
theprint.in/india/your-ashes-can-travel-to-space-for-2000⦠-
AgniKul Cosmos reposted
T Murrali aka Murrali Thalor
@tmurrali
Interesting story on #chandrayaan2 that is heading towards the Moon, which led to a slew of exciting projects on launching Small Satellite Launch Vehicle #sslv using balloon, truck, barrage and what not! @zero2infinity @AgnikulCosmos @MattamRamesh @isro
www.thehindubusinessline.com/news/science/small-rockets-a⦠-
AgniKul Cosmos
@AgnikulCosmos
If you canāt tell a story in 1 minute, you probably donāt understand it. ;-)
Srinath Ravichandran
@srinathr155
www.youtube.com/watch?v=e7tKAGeKTes
@AgnikulCosmos in 1 minute. @IITMIC @iitmadras #nccrd @SpecialeInvest -
AgniKul Cosmos
@AgnikulCosmos
AgniKul Cosmos
@AgnikulCosmos
Captured with awesome exposure ... by one of our crew members šš¼šš½@harimankada
Harikrishnan U
@harimankada
Off to the moon!
#chandrayan2 #gslvmkiii #isro #shar -
AgniKul Cosmos
@AgnikulCosmos
Captured with awesome exposure ... by one of our crew members šš¼šš½@harimankada
Harikrishnan U
@harimankada
Off to the moon!
#chandrayan2 #gslvmkiii #isro #shar -
AgniKul Cosmos
@AgnikulCosmos
What a picture... ā¤ļø
Launch vehicles are simply always a pleasure to look at. #gslvmkiii #chandrayaan2
ISRO
@isro
š®š³ #isromissions š®š³
The launch countdown of #gslvmkiii-M1/#chandrayaan2 commenced today at 1843 Hrs IST. The launch is scheduled at 1443 Hrs IST on July 22nd.
More updates to follow... -
AgniKul Cosmos
@AgnikulCosmos
It is very hard to imagine how that exact moment would have been... when one is literally setting foot on a place for the first time ever where no human has ever been.
NASA
@NASA
Neil Armstrong: āThat's one small step for a man; one giant leap for mankind.ā
As these words were spoken 50 years ago now, history was made. From then on, we lived in a world where humans had set foot on the Moon. Celebrate the #apollo50th anniversary: www.nasa.gov/specials/apollo50th/?linkId=70839917 -
AgniKul Cosmos
@AgnikulCosmos
Wish we all had a rocket to catch for our next trip. #apollo50th #spacetravel
NASA History Office
@NASAhistory
Wake up- it's launch day. Today in 1969, the Apollo 11 crew got up around 4 a.m. and began preparing for their flight. They had a 9:32 a.m. rocket to catch.
#apollo50th -
AgniKul Cosmos reposted
Speciale Invest - TheDeepTechVC
@SpecialeInvest
#astrogatelabs, @AgnikulCosmos and @KawaSpace contribution toward the #spacetech sector!
www.thehindubusinessline.com/news/science/indias-start-up⦠-
AgniKul Cosmos
@AgnikulCosmos
All the 8 are awesome points. Go @DIPPGOI šš½šš¼
DPIIT India
@DPIITGoI
A new TV channel with the DD bouquet of channels will be launched exclusively for Startups. This shall serve as a platform for promoting startups, discussing issues affecting their growth, matchmaking with investors, funding and tax planning (8/8)
-
AgniKul Cosmos
@AgnikulCosmos
A few good mach diamonds...
-
AgniKul Cosmos reposted
Neil deGrasse Tyson
@neiltyson
As a matter of fact, it is Rocket Science.
A shout-out to @ElonMusk for keeping the dreams of Space alive for countless millions of people, and for revealing this mindset to untold others, who donāt yet know why. -
AgniKul Cosmos reposted
Speciale Invest - TheDeepTechVC
@SpecialeInvest
Exciting times ahead for the Indian #spacetech sector.
@KawaSpace @AgnikulCosmos
markettactic.com/investors-eyeing-india-based-aerospace-s⦠-
AgniKul Cosmos
@AgnikulCosmos
ā1 MegaJoule (MJ) is the energy of a 1 ton truck moving at 161 km/hā
kerosene releases ~45 MJ for every kg burnt. So, a rocket engine burning 1 kg of kerosene a second is using the energy of 45 trucks moving at 161 km/h to produce thrust, every second. #humbled #respectnature -
AgniKul Cosmos
@AgnikulCosmos
It is people like you who help us be who we are & who we want to be ... šš½
#madeinindia #studentpower #engineeringinindia
Tejas Shenoy
@shenoytejas16
@AgnikulCosmos
As i was interning at Agnikul, my dad asked me how big the office was, to which i replied : "not sure how big, but definitely the highest engineering per unit square area"
It has been a pleasure to work here. Cheers to everyone at Agnikul! :) -
AgniKul Cosmos reposted
Arjun
@raodyboy
We're sinking our teeth into the space sector with our 3rd investment in a spacetech start-up. Really excited about working with #astrogatelabs @KawaSpace @AgnikulCosmos going ahead!
YourStory
@YourStoryCo
Close on the heels of Bellatrix Aerospace raising $3 million, another spacetech startup has announced funding.
#astrogatelabs @SpecialeInvest @visheshrajaram
yourstory.com/2019/06/startup-funding-spacetech-astrogate⦠-
AgniKul Cosmos
@AgnikulCosmos
We live in amazing times. #fascinatingfutureawaits
NASA
@NASA
GPS coming to a Moon near you! š š°ļø
To ensure the next generation of explorers, the #artemis generation, will have robust location services all the way out in lunar orbit, weāre teaming up with @usairforce to extend the use of GPS in space. Learn how: nasa.tumblr.com/post/185388259129/gps-coming-to-a-moon-ne⦠-
AgniKul Cosmos reposted
IIT Madras Incubation Cell
@IITMIC
#iitmic Newsletter - Feb' 19 edition
Catch the glimpse of #chennaidemoday, new incubatee's, our work in numbers and many more news from our startups & ecosystem - mailchi.mp/26bd09244619/1j5mep8uvv-241211
@iitmadras @TiEChennai @iitm_alumni @AgnikulCosmos, @planystech @AibonoWorld @ZastiAI -
AgniKul Cosmos
@AgnikulCosmos
100th anniversary of the first observation of Gravitational lensing.
Gravity wells are so cool š with all these mind bending phenomena.
NASA History Office
@NASAhistory
100 years ago today, Sir Arthur Eddington observed a solar eclipse to test Einstein's theory of general relativity. The eclipse allowed for measurements of light from distant stars that were bent by the Sun's gravity following the predictions of Einstein's revolutionary theory.
-
AgniKul Cosmos reposted
YourStory
@YourStoryCo
Watch how these young entrepreneurs are aiming to reach the space and how they have been inspired by Elon Musk in space exploration.
@AgnikulCosmos @IITMIC @iitmadras @elonmusk @isro
yourstory.com/2019/05/iit-madras-startup-agnikul-space-sp⦠-
AgniKul Cosmos
@AgnikulCosmos
Towards more collaboration with Murugappa Polytechnic and towards directly encouraging students in shaping our vehicle. Thank you @Murugappa_Group #careers #apprenticeship
-
AgniKul Cosmos
@AgnikulCosmos
Space tech in India ...
YourStory
@YourStoryCo
Not just made for India, but for the world, learn how startups in India's space sector are scaling fast and catching up with the likes of @elonmusk and @JeffBezos.
@SpaceX @blueorigin @isro @NASA @AgnikulCosmos @BellatrixAero #skyroot #astrogate
yourstory.com/2019/05/elon-musk-jeff-bezos-spacex-isro-sp⦠-
AgniKul Cosmos
@AgnikulCosmos
Retaining young engineers and students in our community is important for building a launch vehicle here, in India... actually this is, important for building anything! #reversebraindrain
Srinath Ravichandran
@srinathr155
Glad to have had the chance to work with @IITMIC @naandi_india and @TiEChennai to make this happen on behalf of @AgnikulCosmos
Thank you @Murugappa_Group for the connect.
This is an Important initiative to make real engineering happen in India #madeinindia -
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Was glad to represent @AgnikulCosmos here. Thank you @keralastartups @CNES @StartupMission
Connect by CNES
@ConnectbyCNES
Le @CNES et le @Keralastartup d'Inde signent une lettre d'intention pour favoriser les Ʃchanges entre les acteurs de
l'innovation des deux pays. De nouvelles perspectives pour nos
startups en vue ! #newspace #export #partage #connectbycnes
š®š³š«š· -
AgniKul Cosmos
@AgnikulCosmos
What really is ātimeā? (part 1 of 2) by @srinathr155 link.medium.com/LQKclsQ7CW
Gravity well climbing is fun. Trying to understand what a gravity well is more fun. #time #specialrelativity #speedoflight -
AgniKul Cosmos reposted
Dr. Buzz Aldrin
@TheRealBuzz
Space is not just going up and coming back down again. Space is getting into orbit and being there, living there, establishing a presence, a permanence.
-
AgniKul Cosmos
@AgnikulCosmos
Investing in space tech hardware needs conviction, courage, vision and above all trust. Thank you @SpecialeInvest for making this happen in India.
Speciale Invest - TheDeepTechVC
@SpecialeInvest
Founders of Speciale, Vishesh Rajaram and Arjun Rao discuss the Indian space tech ecosystem with Krishna @YourStoryCo @visheshrajaram @raodyboy
www.facebook.com/SocialStoryYS/posts/2295918353983548/ -
AgniKul Cosmos
@AgnikulCosmos
Thank you for your support. šš½š
Vaiibhav Kapoor
@kapoorvaibhav
Made in India, for the World - a theme we will hopefully see more of. More power (literally!) to @AgnikulCosmos for their existing and upcoming contribution to space tech and innovation in India
yourstory.com/2019/04/iit-madras-startup-satellite-agniku⦠-
AgniKul Cosmos
@AgnikulCosmos
It was an awesome experience meeting investors, suppliers and potential customers at the global Airbus BizLab summit 2019. We absolutely LOVE the #toulouse ecosystem. Glad to be part of the @airbusbizlab season 4 cohort. #bizlabsummit19
#airbusbizlab @AirbusSpace @I2Toulouse -
AgniKul Cosmos
@AgnikulCosmos
A million things had to go just right to get us here. Thank you @IITMIC @TiEChennai @SpecialeInvest @airbusbizlab @startup_mission , NCCRD and of course to the entire team that works really HARD to make things happen.
Srinath Ravichandran
@srinathr155
Based on a true story ... :)
www.thehindubusinessline.com/specials/emerging-entreprene⦠-
AgniKul Cosmos
@AgnikulCosmos
We are usually moving around a lot in that workspace shown. Everyday, there is this ten minute time frame where everyone is at a desk doing his/her laptop thing. This pic represents one such moment. š #hardwarebuilding #crew
Srinath Ravichandran
@srinathr155
Leveraging deep tech needs DEEP support from the ecosystem around.
thank you @IITMIC @SpecialeInvest @TiEChennai @airbusbizlab @startup_mission #enablers #startupindia
economictimes.indiatimes.com/small-biz/startups/newsbuzz/⦠-
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
Thanks to @ficci_india
Got the chance to briefly interact one-on-one with former NASA administrator @cboldenjr today on behalf of @AgnikulCosmos
Was great to hear his thoughts on space privatization in USA during his years with NASA. -
AgniKul Cosmos
@AgnikulCosmos
Future mobility is also about going to space #fms2019
Srinath Ravichandran
@srinathr155
We are at CIIās first-ever show on Future #mobility. Along with other startups of @iitmadras @IITMIC
⦠#fms2019 #futuremobilityshow #greenmobility @CIITradefairs @AgnikulCosmos -
AgniKul Cosmos
@AgnikulCosmos
Proud and honoured to be designing this vehicle in India #makeinindia #startupindia #aeroindiashow
Srinath Ravichandran
@srinathr155
All set for #aeroindia2019 tomorrow
@AgnikulCosmos @iitmadras @IITMIC @TiEChennai @airbusbizlab @AeroIndiashow
Canāt wait to meet our visitors and guests. #makeinindia #startupindia -
AgniKul Cosmos reposted
TiE Chennai
@TiEChennai
Prof. Jhunjhunwala inaugurating the #chennaidemoday co-hosted by @IITMIC and @TiEChennai at @iitm_respark.
This is the largest expo of #deeptech startups in #tamilnadu -
AgniKul Cosmos
@AgnikulCosmos
We are here #chennaidemoday
Thanks to @TiEChennai @iitmadras @IITMIC
Itās in one event like this did we meet our first investor.
IIT Madras Incubation Cell
@IITMIC
We are all set for the #chennaidemoday where #starups #innovators #investors #industry #government are gathered to experience the Chennai startup ecosystem @TiEChennai @edichennaitn
-
AgniKul Cosmos
@AgnikulCosmos
some deltaV to climb out of earth's gravity well.
Srinath Ravichandran
@srinathr155
timesofindia.indiatimes.com/business/india-business/spaceā¦
one small step in fund raising, a giant leap for confidence & credibility. :) #funding
thanks @iitmadras @IITMIC @airbusbizlab for continued support, mentoring and advice.
& of course, a very special thank you, @SpecialeInvest -
AgniKul Cosmos reposted
Arjun
@raodyboy
Super excited for @SpecialeInvest to be part this mission with @AgnikulCosmos, our 1st foray into space tech!
TOI Business
@TOIBusiness
Space startup Agnikul Cosmos raises Rs 3cr in seed funding toi.in/KkdMdY
-
AgniKul Cosmos
@AgnikulCosmos
8.5% of the new year is over. Everything is a countdown in some sense.
-
AgniKul Cosmos
@AgnikulCosmos
We picked a point in earthās orbit around the sun & then we picked a way to say itās a ānewā year when the earth comes to the same point in the orbit again. So, we are celebrating our choice of an arbitrary point in an orbit. Time to start thinking about escaping orbits #newyears
-
AgniKul Cosmos reposted
-
AgniKul Cosmos reposted
-
AgniKul Cosmos reposted
Fermat's Library
@fermatslibrary
In 1736 the mathematician Leonhard Euler was trying to find a way to cross every single one of the seven bridges of Kƶnigsberg exactly once. He realized that this seemingly banal problem was impossible to solve and in the process he created a new area of mathematics, Graph Theory
-
AgniKul Cosmos
@AgnikulCosmos
Constellations, constellations everywhere. Not many vehicles to launch? š¤
Caleb Henry
@ChenrySpace
The FCC has approved LEO constellation applications from SpaceX (7,518 satellites), Telesat (117 satellites), LeoSat (78 satellites) and Kepler Communications (140 satellites). The constellation race continues.
-
AgniKul Cosmos reposted
IIT Madras Incubation Cell
@IITMIC
#iitmicspotlight
@iitmadras incubated startup @AgnikulCosmos selected among 24 startups to join @airbusbizlab accelerator program. Agnikul #designs, manufacture, test and launch #affordable orbital class launch vehicles.
Check out: www.business-standard.com/article/companies/chennai-basedā¦
@Airbus #spacetravel -
AgniKul Cosmos
@AgnikulCosmos
www.airbus.com/newsroom/press-releases/en/2018/11/twenty-ā¦
Can't wait to be part of the Airbus Bizlabs journey. @AirbusSpace @Arianespace -
AgniKul Cosmos reposted
Srinath Ravichandran
@srinathr155
@IAC2018 a truly vibrant IAC just started here with some natural special effects from the sky. #rainbow #iac2018 #bremen
-
AgniKul Cosmos
@AgnikulCosmos
If you continue to stare at an ingenious design that you don't fully understand, a point comes where awe fades away. What is left is respect for common sense & clarity of thought of the designer.
Wait for this moment! This is when comprehension begins. Familiarity breeds context -
AgniKul Cosmos reposted
AgniKul Cosmos
@AgnikulCosmos
@SpaceExpoIndia is going really well. Please visit us there. Stall C11 with other @keralastartups
@BIECentre #spaceexpo -
AgniKul Cosmos
@AgnikulCosmos
@SpaceExpoIndia is going really well. Please visit us there. Stall C11 with other @keralastartups
@BIECentre #spaceexpo -
AgniKul Cosmos
@AgnikulCosmos
Proud to have started designing this launch vehicle in #india
#independencedayindia -
AgniKul Cosmos
@AgnikulCosmos
It takes years & years to build and perfect but gets used only for a few minutes.
#rocketengine
#thankless
go #reusable -
AgniKul Cosmos reposted
Fermat's Library
@fermatslibrary
Here's a vey peculiar Sorting Algorithm:
For every element X on the sequence the program does this:
1) Sleeps for X seconds
2) Prints X
The clock starts simultaneously for all elements. -
AgniKul Cosmos
@AgnikulCosmos
Thanks to everyone in the team who made it yesterday. Great team spirit šš¼
Srinath Ravichandran
@srinathr155
The only good thing that happens from working all day #sunday is that #mondayblues are a lot tamer.
-
AgniKul Cosmos
@AgnikulCosmos
One of the most powerful images that gives us some astounding perspective.
Reminded of #einstein āBrief is this existence, as a visit in a strange house. The path to be pursued is poorly lit by a flickering consciousness, the center of which is the limiting & separating āIā.
Massimo
@Rainmaker1973
Have you ever seen a 9-gigapixel map of the Milky Way galaxy? This jaw-dropping zoomable image contains around 84 million stars and its unlike anything youāve ever seen. The original image has 24.6 gigabytes. How would you define it? www.eso.org/public/images/eso1242a/zoomable/
-
AgniKul Cosmos
@AgnikulCosmos
There are certain types of mindsets that are complete opposites of what people look for in Start-ups but are absolute necessities for launch vehicle engineering. There in lies our core challenge. #mindset #startuplife
-
AgniKul Cosmos
@AgnikulCosmos
Some things are better left unsaid but nothing is better left uncalculated ... in a launch vehicle. #precision
Say NO to #jugaad -
AgniKul Cosmos
@AgnikulCosmos
#foundationsofparadise: "It was hard to think of a greater contrast to an old-time rocket launch, with its elaborate countdown, its split-second timing, its sound & fury." - #clarke on how a space elevator would compare to a rocket. "smooth, effortless & gentler than a balloon"
-
AgniKul Cosmos
@AgnikulCosmos
āBuilding a hardware startup ā a tale of two dichotomiesā by @srinathr155 medium.com/p/building-a-hardware-startup-a-tale-of-two-diā¦
-
AgniKul Cosmos
@AgnikulCosmos
Itās the journey that counts ... we say. Glad to be building a space journey enabler (rocket).
-
AgniKul Cosmos
@AgnikulCosmos
From the āfundamentals of astrodynamicsā by Bates, Mueller.
Sheer, unadulterated intensity in a pursuit gets you answers and coincidental autocorrections. #purity #kepler #orbits -
AgniKul Cosmos
@AgnikulCosmos
This has #rendezvouswithrama written all over it. #arthurcclarke
NASA Goddard
@NASAGoddard
Observatories including @NASAHubble found that the interstellar object named āOumuamua gained an extra boost of speed. But, is 'Oumuamua an interstellar asteroid or comet? š āļøRead more: www.nasa.gov/news-release/our-solar-systems-first-known-iā¦
-
AgniKul Cosmos
@AgnikulCosmos
For #launch unknown is sure not had, and had and yet unknown is as launched not at all. #paradiselost #imperfectmeters
-
AgniKul Cosmos
@AgnikulCosmos
Launch vehicle rhymes:
One injector to rule them all,
One injector to find them,
One injector to bring them all and in the brightness bind them.
#lotr #rocketengine #imperfectmeters -
AgniKul Cosmos
@AgnikulCosmos
The problem with #hardware is that it is hard ware. The illusion of trying to contain entropy in doing hardware is quite an amazing illusion.
-
AgniKul Cosmos
@AgnikulCosmos
A planet is spinning so fast that its equatorial region has attained orbital velocity. #geek #trickytues
-
AgniKul Cosmos
@AgnikulCosmos
#summersolstice is around the corner. How #boring would it have been if the earthās axis of rotation were not at an angle to its orbital plane?
No seasons. No solstices. No distinctions between hemispheres.
#symmetry can be bland. -
AgniKul Cosmos
@AgnikulCosmos
Inverted #pendulum problems don't swing your way at all. #swinging
-
AgniKul Cosmos
@AgnikulCosmos
We were just doing some #trajectory optimisation and realized something. There are no #crossroads in #space... sort of.
-
AgniKul Cosmos
@AgnikulCosmos
Instead of saying āwe have not done our aerodynamics optimizations fullyā, should we say āwe have a launch vehicle that can take off from the #moonā #optimism #halffull
-
AgniKul Cosmos
@AgnikulCosmos
They don't teach engine injectors while you are in undergrad. #inconvenienttruth or #convenientslip ?
-
AgniKul Cosmos
@AgnikulCosmos
Unintentional #levitation - a side effect of rocket engine development
youtu.be/37i98c3Poew






























































































































































































































































































































































































