#kiconasia2026 is happening right now! Livestream at live.bilibili.com/1924026547 Recordings will be posted after the conference.
KiCad
KiCad ( KEE-kad) is a free software suite for electronic design automation (EDA). It facilitates the design and simulation of electronic hardware for PCB manufacturing. It features an integrated environment for schematic capture, PCB layout, manufacturing file viewing, ngspice-provided SPICE simulation, and engineering calculation. Tools exist within the package to create bill of materials, artwork, Gerber files, and 3D models of the PCB and its components. More on Wikipedia
-
KiCad PCB
@kicad_pcb
-
KiCad PCB
@kicad_pcb
KiCad Version 10.0.8 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/10/KiCad-10.0.8-Release/ -
KiCad PCB
@kicad_pcb
Looking forward to a great conference! Some amazing discussions happen each year
NextPCB
@HQ_NextPCB
๐๐๐๐ ๐๐๐ผ ๐๐ฒ๐ฒ๐ธ๐ ๐๐ป๐๐ถ๐น ๐๐ถ๐๐ผ๐ป ๐๐๐ถ๐ฎ ๐ฎ๐ฌ๐ฎ๐ฒ!
This year, weโll be joined by ๐๐ถ๐๐ฎ๐ฑ ๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐ ๐๐ฒ๐ฎ๐ฑ Wayne Stambaugh ๐ฎ๐ป๐ฑ ๐๐ฒ๐ฎ๐ฑ ๐๐ฒ๐๐ฒ๐น๐ผ๐ฝ๐ฒ๐ฟ @SethHillbrand alongside other KiCad developers, contributors, and casual and professional users in the heart of Shenzhenโs hardware ecosystem: Huaqiangbei.
The Jiangmen Smart Manufacturing Base tour is fully booked, but you can still book tickets for two packed days of KiCad talks, workshops and experience sharing from KiCad developers, third-party developers, researchers, and professional and hobbyist users alike.
Confirmed talks span everything from ๐๐ต๐ฎ๐โ๐ ๐ฐ๐ผ๐บ๐ถ๐ป๐ด ๐ถ๐ป ๐๐ถ๐๐ฎ๐ฑ ๐ญ๐ญ and the latest KiCad project developments to ๐๐-๐ฎ๐๐๐ถ๐๐๐ฒ๐ฑ ๐ฃ๐๐ ๐ฑ๐ฒ๐๐ถ๐ด๐ป ๐ฎ๐๐๐ผ๐บ๐ฎ๐๐ถ๐ผ๐ป, ๐๐/๐๐ ๐ณ๐ผ๐ฟ ๐ต๐ฎ๐ฟ๐ฑ๐๐ฎ๐ฟ๐ฒ, ๐ฎ๐๐๐ผ๐บ๐ฎ๐๐ฒ๐ฑ ๐บ๐ฎ๐ป๐๐ณ๐ฎ๐ฐ๐๐๐ฟ๐ถ๐ป๐ด ๐ฟ๐ฒ๐น๐ฒ๐ฎ๐๐ฒ๐, ๐ฐ๐ฒ๐ฟ๐๐ถ๐ณ๐ถ๐ฐ๐ฎ๐๐ถ๐ผ๐ป ๐ฑ๐ผ๐ฐ๐๐บ๐ฒ๐ป๐๐ฎ๐๐ถ๐ผ๐ป ๐ฎ๐ป๐ฑ ๐ฟ๐ฒ๐ฝ๐ฟ๐ผ๐ฑ๐๐ฐ๐ถ๐ฏ๐น๐ฒ ๐ผ๐ฝ๐ฒ๐ป ๐ต๐ฎ๐ฟ๐ฑ๐๐ฎ๐ฟ๐ฒ.
Whether you're a seasoned KiCad user or just KiCad-curious, this is the place to connect with the people building the tools you use every day.
๐๏ธ ๐ง๐ถ๐ฐ๐ธ๐ฒ๐๐ ๐ฎ๐ฟ๐ฒ ๐๐๐ถ๐น๐น ๐ฎ๐๐ฎ๐ถ๐น๐ฎ๐ฏ๐น๐ฒ: kicon.kicad.org/asia2026/en/
#kiconasia #kicad #pcbdesign #shenzhen #huaqiangbei #hardwareengineering -
KiCad PCB
@kicad_pcb
10.0.8 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/10/KiCad-Version-10.0.8-Release-Cโฆ -
KiCad PCB
@kicad_pcb
KiCad Version 10.0.7 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/10/KiCad-10.0.7-Release/ -
KiCad PCB
@kicad_pcb
Come talk to the KiCad team at #pcbwest in San Jose today. We're at booth 914. Be sure to ask for a T-shirt ๐
-
KiCad PCB
@kicad_pcb
10.0.7 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/09/KiCad-Version-10.0.7-Release-Cโฆ -
KiCad PCB reposted
NextPCB
@HQ_NextPCB
๐๐ถ๐๐ผ๐ป ๐๐๐ถ๐ฎ ๐ถ๐ ๐ฐ๐ผ๐บ๐ถ๐ป๐ด - ๐๐ป๐ฑ ๐๐ต๐ถ๐ ๐๐ฒ๐ฎ๐ฟ, ๐ก๐ฒ๐ ๐๐ฃ๐๐ ๐ถ๐ ๐ผ๐ณ๐ณ๐ฒ๐ฟ๐ถ๐ป๐ด ๐๐ถ๐๐ผ๐ป ๐ฝ๐ฎ๐ฟ๐๐ถ๐ฐ๐ถ๐ฝ๐ฎ๐ป๐๐ ๐๐ต๐ฒ ๐ณ๐ถ๐ฟ๐๐ ๐ฝ๐๐ฏ๐น๐ถ๐ฐ ๐ณ๐ฎ๐ฐ๐๐ผ๐ฟ๐ ๐๐ผ๐๐ฟ ๐ผ๐ณ ๐ผ๐๐ฟ ๐ก๐ฒ๐ ๐ฆ๐บ๐ฎ๐ฟ๐ ๐ ๐ฎ๐ป๐๐ณ๐ฎ๐ฐ๐๐๐ฟ๐ถ๐ป๐ด ๐๐ฎ๐๐ฒ ๐ถ๐ป ๐๐ถ๐ฎ๐ป๐ด๐บ๐ฒ๐ป, ๐ฆ๐ผ๐๐๐ต ๐๐ต๐ถ๐ป๐ฎ.
Join a jam-packed day trip across four floors, where you'll follow the entire PCB production process - ๐ถ๐ป ๐๐ต๐ฒ ๐ฐ๐ผ๐ฟ๐ฟ๐ฒ๐ฐ๐ ๐ผ๐ฟ๐ฑ๐ฒ๐ฟ - from raw fibreglass sheets to pattern-printed, solder mask-slapped boards to fully populated and AOI-checked PCBA. There will also be a chance for you to pit your hand soldering skills against local veterans ๐
Unlike other factory tours, we've curated this tour to help you ๐ฎ๐ฐ๐๐๐ฎ๐น๐น๐ ๐๐ป๐ฑ๐ฒ๐ฟ๐๐๐ฎ๐ป๐ฑ ๐๐ต๐ฒ ๐บ๐ฎ๐ฐ๐ต๐ถ๐ป๐ฒ๐, ๐๐ต๐ฒ ๐๐ฒ๐ฐ๐ต๐ป๐ผ๐น๐ผ๐ด๐ถ๐ฒ๐ and ๐๐ต๐ฒ ๐ฒ๐ป๐ด๐ถ๐ป๐ฒ๐ฒ๐ฟ๐ถ๐ป๐ด ๐ฑ๐ฒ๐ฐ๐ถ๐๐ถ๐ผ๐ป๐ ๐๐ต๐ฎ๐ ๐๐ต๐ฎ๐ฝ๐ฒ ๐บ๐ฎ๐ป๐๐ณ๐ฎ๐ฐ๐๐๐ฟ๐ฎ๐ฏ๐ถ๐น๐ถ๐๐. Be prepared to rethink how you understand and design PCBs.
See modern PCB production like never before (and actually make sense of it) at KiCon Asia.
๐ข๐ป๐น๐ ๐ฐ๐ฌ ๐๐ฒ๐ฎ๐๐ ๐ฎ๐๐ฎ๐ถ๐น๐ฎ๐ฏ๐น๐ฒ
๐ฆ๐ฒ๐ฐ๐๐ฟ๐ฒ ๐๐ผ๐๐ฟ ๐๐ฒ๐ฎ๐ ๐ป๐ผ๐:
kicon.kicad.org/asia2026/en/schedule/factory-tour/
Tickets include lunch and round-trip bus transportation from Shenzhen to Jiangmen.
Stay tuned for more information on KiCon Asia 2026
#kiconasia #factorytour #kicad #designformanufacturing #smartmanufacturing KiCad Services Corporation -
KiCad PCB
@kicad_pcb
Thanks for @MaxClerkwell for the awesome support and throwing a great event!
Stephan Bรถkelmann
@MaxClerkwell
@kicad_pcb #kicon is starting.
Great weather, great venue, great program ๐ค -
KiCad PCB
@kicad_pcb
Wayne Stambaugh kicks off KiCon Europe 2026 with the KiCad status update
KiCad PCB
@kicad_pcb
New KiCad T-shirt available at #kicon Europe 2026
KiCad PCB
@kicad_pcb
Holger Vogt discussing ngspice simulation in KiCad and beyond
-
KiCad PCB
@kicad_pcb
KiCad Version 10.0.6 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/08/KiCad-10.0.6-Release/ -
KiCad PCB
@kicad_pcb
10.0.6 release candidate 2 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/08/KiCad-Version-10.0.6-Release-Cโฆ -
KiCad PCB
@kicad_pcb
OK folks! We found a couple of issues with 10.0.6-rc1, so we've fixed them an issued 10.0.6-rc2. This will become 10.0.6 this week, if you don't find any more. Please give it a test run and let us know if there are any show stoppers!
downloads.kicad.org/kicad/ -
KiCad PCB
@kicad_pcb
10.0.6 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/08/KiCad-Version-10.0.6-Release-Cโฆ -
KiCad PCB reposted
eight2fivehub
@eight2fivehub
Your electronics project doesnโt have to stop at the breadboard. Learn how to turn a circuit concept into a manufacturing-ready PCB at our hands-on PCB Design Workshop.
Using KiCad, youโll work through the actual PCB design process, from schematic and component selection to layout, routing, DRC and Gerber generation.
This workshop is for university students.
๐๏ธ $10 | Lunch included
๐ 10:00hrs-16:00hrs
Come ready to learn, design and build.
Register now: docs.google.com/forms/d/e/1FAIpQLSdlAq7430ct-9sR1uzhiogdmโฆ
#pcbdesign #kicad #electronics #tmeducation #techhub -
KiCad PCB
@kicad_pcb
KiCad v11 will be gaining geometric constraints. This is based on the excellent library by @FreeCADNews planegcs. You can test-drive this feature in today's nightly builds downloads.kicad.org/kicad/
Post not available here, view on X
KiCad PCB
@kicad_pcb
*Footprints coming soon. :) We'll get them in before v11
-
KiCad PCB
@kicad_pcb
KiCad Version 10.0.5 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/07/KiCad-10.0.5-Release/ -
KiCad PCB reposted
iยฒcjak
@i2cjak
KiCad 10 is out on GitLab! We reset everyoneโs quotas. Happy routing!
-
KiCad PCB
@kicad_pcb
Indeed! Modern KiCad can import Altium, Allegro, PADS, Eagle, CADStar, EasyEDA, P-Cad, Diptrace and many more... We are always looking to add additional support if your company needs import options. The smoother the ecosystem is, the more we all learn from each other.
Alperen
@AlperenAkkuncu
The PCB files for high-end ultrascale+ dev boards are available as allegro files which can be easily imported to @kicad_pcb
It's got many high speed interfaces if you need a reference board that you want to review.
Check it out:
www.amd.com/en/products/adaptive-socs-and-fpgas/evaluatioโฆ -
KiCad PCB
@kicad_pcb
10.0.5 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/07/KiCad-Version-10.0.5-Release-Cโฆ -
KiCad PCB
@kicad_pcb
KiCad has a very active issue tracker at gitlab.com/kicad/code/kicad/-/work_items . Which open issue is your biggest pain point?
-
KiCad PCB
@kicad_pcb
KiCad Version 10.0.4 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/06/KiCad-10.0.4-Release/ -
Post not available here, view on X
KiCad PCB
@kicad_pcb
We highly recommend building circuits. You could ask for a canard ร la presse, but I'm afraid that we'd make a hash of it.
-
KiCad PCB
@kicad_pcb
They forgot one. ๐ Half of the companies on this map are KiCad shops with more each month. We help build the future of space!
Space Investor
@SpaceInvestor_D
The Great Space Corridor
-
KiCad PCB
@kicad_pcb
10.0.4 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/06/KiCad-Version-10.0.4-Release-Cโฆ -
KiCad PCB reposted
Tom Fleet
@tomfleet
I'll be honest, I just let out a little happy noise when I noticed this in @kicad_pcb v10.0!
-
Post not available here, view on X
KiCad PCB
@kicad_pcb
Coming soon to a KiCad near you. forum.kicad.info/t/post-v10-new-features-and-development-โฆ
-
KiCad PCB
@kicad_pcb
Interesting. Almost like they took an open source tool, modified and distributed it. I'm sure that the source is available...
BlindVia
@blind_via
Rats Nest in the Schematic
The guys from Solderable asked me to check out their parts finding and schematic generating PCB tool. I asked for a demonstration
The ability to make the schematic readable to your preference, but with guidance from a net list generated, not badThis media couldn't be displayed. See it on the original post. -
KiCad PCB reposted
FreeCAD (CAD+CAM+CAE)
@FreeCADNews
๐ข Register for the North America #freecad Meetup in Knoxville, TN on Aug. 07 - 09, 2026 hosted by @KnoxMakers.
The gathering is relatively informal: there will be ad hoc presentations, discussions, tutorials + other activities...come meet the community!
blog.freecad.org/2026/06/08/register-for-north-america-frโฆ -
KiCad PCB
@kicad_pcb
We're with you on this! And just add that contributions might be bug reports or giving a talk at your local conference/university/business. Or donating to support others' contributions. Every bit helps make Open Source CAD better for everyone
FreeCAD (CAD+CAM+CAE)
@FreeCADNews
opensource progresses when people contribute their time/energy to improve it.
-
KiCad PCB
@kicad_pcb
Did you know that you can highlight nets in KiCad and navigate between items?
1) Use the ~ key to highlight the net under your mouse
2) All items on that net are shown in the Net Navigator panel
3) The sheets in your hierarchy with that net are highlighted
Press Esc to cancel -
KiCad PCB
@kicad_pcb
KiCad Version 10.0.3 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/05/KiCad-10.0.3-Release/ -
KiCad PCB
@kicad_pcb
KiCad Version 10.0.2 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/05/KiCad-10.0.2-Release/ -
KiCad PCB
@kicad_pcb
10.0.2 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/05/KiCad-Version-10.0.2-Release-Cโฆ -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.9 Released
The KiCad project is proud to announce the latest and final version 9 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/04/KiCad-9.0.9-Release/ -
KiCad PCB reposted
PCBWay-Anson
@PCBWayAnson
๐ Our Online Kicad Design Contest is officially live!
Weโve been working closely with @kicad_pcb for a long time, Our goal has always been the same: to help more electronics enthusiasts build their projects and bring ideas to life.
๐More details here:
www.pcbway.com/activity/2026-kicad-pcb-design-contest.html -
KiCad PCB
@kicad_pcb
We've been saying this for years. Glad to see @HQ_NextPCB getting some love. You can use their plug-in directly in KiCad and help support the project at the same time
jlcjak
@jlcjak
wait I had no clue nextpcb can be cheaper than jlcpcb for prototypes. That's insane
-
KiCad PCB reposted
-
KiCad PCB
@kicad_pcb
9.0.9 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/04/KiCad-Version-9.0.9-Release-Caโฆ -
KiCad PCB reposted
PCBWay
@PCBWayOfficial
๐คThe KiCad 10 Contest is now open!
Join the global community, push the boundaries, and showcase your creativity with KiCad 10.
Participate today๐www.pcbway.com/activity/2026-kicad-pcb-design-contest.html -
KiCad PCB
@kicad_pcb
KiCad Version 10.0.1 Released
The KiCad project is proud to announce the latest version 10 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/04/KiCad-10.0.1-Release/ -
KiCad PCB
@kicad_pcb
KiCad version 10.0.1 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/04/KiCad-Version-10.0.1-Release-Cโฆ -
KiCad PCB
@kicad_pcb
We may not know art, but we know what we like! Well done @madebyjessg
Jess
@realjessreil
Ok this might be the best solder job Iโve done yet ๐
-
KiCad PCB reposted
FreeCAD (CAD+CAM+CAE)
@FreeCADNews
#freecad v1.1 has been released!!! Thx to everyone that worked, tested, triaged, donated etc. to make this happen! Spread the word, RT please ๐
Announcement: blog.freecad.org/2026/03/25/freecad-version-1-1-released/
Release Notes: wiki.freecad.org/Release_notes_1.1
youtu.be/a9biWv_M8p8
#floss #foss #3dcad #cad #cam #fem -
KiCad PCB reposted
ใใใใ@ๆ่กๆธๅ
ธใใฑ36ใ
@RamTuckey
kicad10.0ใฎใใใใชใผใใผ่กจ็คบ่ฆใใใใฆๅฅฝใ๐
-
KiCad PCB
@kicad_pcb
KiCad Version 10.0.0 Released
The KiCad project is proud to announce the latest major stable version 10 release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/03/Version-10.0.0-Released/ -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.8 Released
The KiCad project is proud to announce the latest version 9 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/03/KiCad-9.0.8-Release/ -
KiCad PCB
@kicad_pcb
Lots of people new to KiCad think that we copy interfaces from <pick your favourite tool>. But look back through the history and you'll see that this existed in KiCad first. How do we know? Well, 3d-viewer was added in 2004. Before Altium Designer existed as a product.
BlindVia
@blind_via
KiCAD PCB putting priority on the 3d modeling quality was the best they could have ever done. Once again, this is what Altium did before them. They literally copied Altium bar for bar with this viewer. Say it with me folks: EVERYBODY WANTS TO BE LIKE ALTIUM!
-
KiCad PCB
@kicad_pcb
10.0.0 release candidate 2 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/03/KiCad-Version-10.0.0-Release-Cโฆ -
KiCad PCB
@kicad_pcb
9.0.8 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/03/KiCad-Version-9.0.8-Release-Caโฆ -
KiCad PCB
@kicad_pcb
KiCad will be at Booth 1264 at #designcon2026 today and Thursday. Stop by and chat and test drive KiCad v10
-
KiCad PCB
@kicad_pcb
KiCad version 10 coming soon with some exciting new features including new importers!
www.kicad.org/blog/2026/02/Three-New-Importers-in-KiCad-1โฆ -
KiCad PCB reposted
Eli Hughes
@emh203
Ok... Kicad V10 added something interesting...
Allegro PCB Import
This is the NXP FRDM-iMX93. All of NXP's design files are Allegro. -
KiCad PCB
@kicad_pcb
Some beautiful examples of KiCad in action over at Olimex
OLIMEX Ltd
@Olimex
Introducing the ESP32-P4-PC Open Source Hardware Board - the most comprehensive and feature-rich ESP32-P4 board on the market. olimex.wordpress.com/2026/02/17/esp32-p4-pc-open-source-hโฆ #opensourcehardware #esp32p4 #olimex #riscv #iot #embeddedsystems
-
KiCad PCB
@kicad_pcb
10.0.0 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2026/02/KiCad-Version-10.0.0-Release-Cโฆ -
KiCad PCB reposted
F.O.L.A
@folaoftech
She has no clue what her son is up toโฆ honestly, I don't get it either.
This media couldn't be displayed. See it on the original post. -
KiCad PCB
@kicad_pcb
KiCad has released a new packaging format for Linux. You can know run the latest KiCad using AppImage. This is still in testing, so please give it a spin and let us know if something doesn't work correctly. You can find them at downloads.kicad.org
-
KiCad PCB
@kicad_pcb
KiCad is has started our annual fund drive to support the release of v10 and development of v11! Want to know what your support helped build in 2025? Read all about it at www.kicad.org/blog/2026/01/2025-End-of-Year-Fund-Drive-Thโฆ
With your help, v11 will be amazing. Help donate here: donate.kicad.org -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.7 Released
The KiCad project is proud to announce the latest version 9 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2026/01/KiCad-9.0.7-Release/ -
KiCad PCB
@kicad_pcb
9.0.7 release candidate 2 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2025/12/KiCad-Version-9.0.7-Release-Caโฆ -
KiCad PCB
@kicad_pcb
We were working to get 9.0.7 out in time for the holidays, but we just missed! 9.0.7RC2 is very likely going to be 9.0.7 so please give it a spin and let us know if you see any issues.
downloads.kicad.org/kicad/windows/explore/9.0-testing/dowโฆ
kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-univeโฆ -
KiCad PCB
@kicad_pcb
KiCad 10 is almost here! That means we need to update our demos. This highlight the features and workflows used in real world KiCad projects.
Do you have a favorite project? Nominate them here and we'll reach out to see if they'd like to be featured forms.gle/jHcrZhgStHF32DuJ6 -
KiCad PCB
@kicad_pcb
Watch @futureshocked give an amazing talk on learning, KiCad and how we move into the future at KiCon Asia 2025
youtu.be/dMHChUcpDoQ -
KiCad PCB reposted
iยฒcjak
@i2cjak
crazy that kicad added native QR code generation. sick.
-
KiCad PCB reposted
Cyber City Circuits
@MakeAugusta
A Simple and Bulletproof Minimum RP2040 Schematic Design.
www.cybercitycircuits.com -
KiCad PCB
@kicad_pcb
9.0.7 release candidate 1 available.
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2025/12/KiCad-Version-9.0.7-Release-Caโฆ -
KiCad PCB
@kicad_pcb
Job opening at KiCad! We're looking to hire a full-time, remote C++ programmer in the US or EU. Details and application at jobs.kipro-pcb.com/jobs/Careers
Join our team and build the future of EDA software! -
KiCad PCB
@kicad_pcb
This December is a great time to try out the Aisler plugin for KiCad and get an extra discount! They are a long time friend of KiCad and using their plugin is a easy way to support the KiCad EDA community.
KiCad PCB
@kicad_pcb
Of course, we should have tagged @AislerHQ!
-
KiCad PCB reposted
Cyber City Circuits
@MakeAugusta
KiCAD is my favorite video game.
-
KiCad PCB
@kicad_pcb
Our friends at @PCBWayOfficial just launched their holiday sales at www.pcbway.com/activity/christmas2025.html As a special deal for KiCad users, if you use the PCBWay KiCad plugin, you get an additional discount and each purchase helps to support the development of KiCad!
-
KiCad PCB reposted
skot
@skot9000
๐คฏ I just met the most excellent Wayne Stambaugh, the project lead for @kicad_pcb !! !
-
KiCad PCB reposted
NextPCB
@HQ_NextPCB
NextPCB was honored to host #kicon Asia, the only annual KiCad conference in the East for the third time. The event brought together both new and familiar faces from across Asia, Australia, and beyond, creating a vibrant gathering where attendees explored a wide spectrum of @kicad_pcb applications in commercial, educational, and hobbyist contexts.
As with previous years, and even more so this year, AI and smart integrations were a hot topic. In addition to revealing the exciting updates coming to KiCad 10, speakers teased the idea of possible AI integrations with real implementations, from symbol creation and schematic design, component management and routing.
A special thank you to all our guest speakers: Peter Dalmaris @futureshocked of Tech Explorations, Stephan ๆฝๆณๆฐ Bรถkelmann, Nicolรฒ Merendino, Rocket Xia of @dfrobotcn , as well as representatives from @WurthElectronic and @Circuitlyapp . We are also deeply grateful to the KiCad lead developers, @SethHillbrand, Ethan Chien, and Alex Schwarkopf, and finally, to our lead coordinator, Hubert Hu of #nextpcb, and his entire team for making KiCon Asia another great success.
We hope to see you all again at KiCon Asia 2026! -
KiCad PCB
@kicad_pcb
Andrew Greenberg from PSU, gives a masterclass in making intelligible, useful schematic diagrams at KiCon North America
youtu.be/X0hd_v8qRiY -
KiCad PCB
@kicad_pcb
Over at bsky.app/profile/ericmigi.com/post/3m4t4rhpyqs2m You can find info on the new Pebble 2. #madewithkicad
-
KiCad PCB
@kicad_pcb
KiCad Version 9.0.6 Released
The KiCad project is proud to announce the latest version 9 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2025/10/KiCad-9.0.6-Release/
KiCad PCB
@kicad_pcb
-
KiCad PCB
@kicad_pcb
9.0.6 release candidate 2 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2025/10/KiCad-Version-9.0.6-Release-Caโฆ -
KiCad PCB
@kicad_pcb
9.0.6 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2025/10/KiCad-Version-9.0.6-Release-Caโฆ -
KiCad PCB reposted
NextPCB
@HQ_NextPCB
๐ฅ We're excited to announce the launch of theย KiCad Project communityย โ a new hub for electronics enthusiasts, makers ๐ง , and engineers to share, inspire, and collaborate!
Every time you publish your project on the platform,ย NextPCB will donate $10 in your name to support @kicad_pcb Services Corporation. That means your creativity directly fuels the growth of open-source EDA tools! ๐ก
Whether you're designing a smart device, a DIY gadget, or a professional PCB โ share your work, gain visibility, and help power the future of KiCad.
Join Now:www.kicadprojects.com
#kicad #nextpcb #opensource #pcbdesign #electronics #makercommunity -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.5 Released
The KiCad project is proud to announce the latest version 9 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2025/10/KiCad-9.0.5-Release/ -
KiCad PCB
@kicad_pcb
9.0.5 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2025/09/KiCad-Version-9.0.5-Release-Caโฆ -
KiCad PCB
@kicad_pcb
Looking forward to KiCon Europe this week! Should be a great event. pretalx.kicad.org/kicon-europe-2025/schedule/
-
KiCad PCB
@kicad_pcb
We're thrilled to announce the next release of KiCad: 9.0.4! www.kicad.org/blog/2025/08/KiCad-9.0.4-Release/
Lots of bugs fixed and performance improved. We're moving on toward 10!
KiCad PCB
@kicad_pcb
And by "moving on toward 10", we mean building features and fixing bugs. 9.0.x series will continue to be updated and released until at least 10.0.0 is out in the world.
-
KiCad PCB
@kicad_pcb
9.0.4 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2025/08/KiCad-Version-9.0.4-Release-Caโฆ -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.3 Released
The KiCad project is proud to announce the latest version 9 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2025/07/KiCad-9.0.3-Release/ -
KiCad PCB
@kicad_pcb
9.0.3 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2025/07/KiCad-Version-9.0.3-Release-Caโฆ -
KiCad PCB
@kicad_pcb
Wayne Stambaugh's talk on the KiCad Project status at KiCon North America is now online at youtu.be/uUu6nX5VxcA
Want to join us at the next KiCon? kicon.kicad.org -
KiCad PCB
@kicad_pcb
We have many questions from our Linux community about using Wayland. It is still missing basic functionality that KiCad users require. We hope that it continues to improve. But for now, if you need to use KiCad on Linux, we recommend installing X11.
www.kicad.org/blog/2025/06/KiCad-and-Wayland-Support/ -
KiCad PCB reposted
Amie DD
@amiedoubleD
Things Iโve built this week. Lady Gaga PCB ribbon design and schematic for #dragoncon2025 the cutest #lego minifig vending machine and book-nook.
-
KiCad PCB reposted
CIRCUITSTATE
@circuitstate
It's the PCB for a second prototype of an Air Quality Monitor we are building currently. KiCad's STEP export feature now supports exporting silkscreen, solder mask, track and pads as separate objects. This allows us to make realistic PCB renders.
-
KiCad PCB
@kicad_pcb
Check out an excellent introduction to KiCad template design for production projects from Vincent Nguyen www.youtube.com/watch?v=_ZjyeltLMAg
-
KiCad PCB
@kicad_pcb
KiCon North America Livestream at www.youtube.com/watch?v=v2uiwDnLGx8&list=PL-reVyOy0P87rP9โฆ
Ask some questions in the chat and we'll pass them along to the speakers in realtime
KiCad PCB
@kicad_pcb
Day 2 of KiCon North America is streaming at youtube.com/live/h8s6T9pnWlY
-
KiCad PCB
@kicad_pcb
#kicon North America 2025 is proud to have @Circuitlyapp as a sponsor!
Join us on May 30 at UC San Diego for their talk:
โCircuitlyโs Design and Architecture: An inside look at a KiCad-compatible, git and web browser-based EDA tool.โ
KiCad PCB
@kicad_pcb
You will learn how Circuitly enables browser-based collaborative editing of KiCad files through GitHub and GitLab integration.
This is a great opportunity to explore innovative approaches to EDA tools. -
KiCad PCB
@kicad_pcb
It is almost time for KiCon North America 2025! We have a great lineup of talks covering many aspects of KiCad from around industry, education and research. Check out the schedule at:
pretalx.kicad.org/kicon-na-2025/schedule/ -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.2 Released
The KiCad project is proud to announce the latest version 9 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2025/05/KiCad-9.0.2-Release/ -
KiCad PCB
@kicad_pcb
9.0.2 release candidate 1 available
See the blog post on the KiCad website for more information.
www.kicad.org/blog/2025/04/KiCad-Version-9.0.2-Release-Caโฆ -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.1 Released
The KiCad project is proud to announce the latest version 9 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2025/03/KiCad-9.0.1-Release/ -
KiCad PCB reposted
DigiKey
@digikey
Do you love @kicad_pcb? We do, too! ๐ฅฐ
We currently have a fund-drive donation match campaign in support of the KiCad platform and it's community.
If you'd like to help support KiCad with us, click below. ๐๐
โก๏ธ www.kicad.org
#kicad #design #electronics -
KiCad PCB reposted
Wladek Grabinski
@wladek60
DigiKey Announces Sponsorship of KiCad to Support Open-Source EDA Development www.prnewswire.com/news-releases/digikey-announces-sponsoโฆ
-
KiCad PCB reposted
Pedro Lopes
@plopesresearch
We are about to start our printed circuit board design class ( hcipcb.plopes.org) at @UChicagoPSD @UChicagoCS and just in time upgraded to @kicad_pcb v9, great work by all their team! Let the fun of designing circuits and PCBs begin!
KiCad PCB
@kicad_pcb
KiCad Version 9.0.1 Release Candidate 2 Available
See the blog post KiCad website for more details.
www.kicad.org/blog/2025/03/KiCad-Version-9.0.1-Release-Caโฆ -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.1 Release Candidate 2 Available
See the blog post KiCad website for more details.
www.kicad.org/blog/2025/03/KiCad-Version-9.0.1-Release-Caโฆ -
KiCad PCB reposted
cosam
@cosam_the_great
YouTuber: "You will never own this."
PCB reproducer/reverse engineer/general weirdo: "Hold my beer."
youtu.be/Eeo4INoGyRY -
KiCad PCB reposted
ใใทใใญๅทฅๆฅญ_ใใ
@HSBL_Industrial
ใญใผใฑใใใงBOBAFETใใฃใผใใฃใกใใชใขใฏใทใงใณ้ ใใ
็ใงKICADใซใๅธๆฝใใพใใ๐ BobaFET Cotton T-Shirt โ KiCad
shop.kicad.org/products/bobafet-cotton-t-shirt
ใใทใใญๅทฅๆฅญ_ใใ
@HSBL_Industrial
BOBAFETใใฃใผใๆฅใฆใ
ไปๅใฏ็ๅฐๅใ่ฏใใ -
KiCad PCB reposted
Electronics Dev
@electronicsdev_
KiCad 9's Revolutionary Update & Microsoft's 20-Year Quantum Computing Quest [full episode]
This media couldn't be displayed. See it on the original post. -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.1 Release Candidate 1 Available
See the blog post KiCad website for more details.
www.kicad.org/blog/2025/03/KiCad-Version-9.0.1-Release-Caโฆ -
KiCad PCB
@kicad_pcb
Stop by IPC APEX this week and chat with us at booth 942. Should be a great show!
-
KiCad PCB reposted
Rafael Sadowski
@sizeofvoid
I know that there are some #kicad #openbsd users out there. So I am pleased to share that I am very confident that we will have a stable KiCAD 9.0.0 release in OpenBSD 7.7.
-
KiCad PCB reposted
Nicolas S. ๐ฐ๏ธ
@ns_schoe
Just tested @kicad_pcb v9 new STEP export, with the silkscreen.
This is absolutely gorgeous โฅ๏ธ
VERY useful for CAD integration.
I also find the PCB Colors to be better. More realistic.
Dunnow if smth changed or if I messed with features.
Great. Job. Guys. ๐ -
KiCad PCB reposted
fish
@fishPointer
spent my time in the datasheet mines and finally have a schematic to post. feedback welcome
-
KiCad PCB reposted
Se nos va de las manos
@senosvapod
ยกKiCad 9 ya estรก aquรญ! ๐ Diseรฑo de PCB de nivel profesional con diseรฑo multicanal e interfaz mejorada. Ideal para todos. ๐๏ธ #kicad #pcbdesign
l.senosva.com/7iilx -
KiCad PCB reposted
NextPCB
@HQ_NextPCB
๐ Watch Peter Dalmaris @futureshocked @txplore create a complex four-layer IoT development board using the release candidate version of KiCad 9
๐ This board features the ESP32-C3 SoC, sensors, flash memory, an SD card reader, and power management circuits, making it a versatile platform for IoT applications. ๐ก
Join engineer Peter for 6 hours of immersive tutorials on how KiCad 9's RC1/RC2 updates simplify professional-grade PCB design ๐ from schematic creation to layout and preparation for manufacturing.
๐ฅณ Watch the Full Tutorial Now: www.youtube.com/watch?v=LO9AO0XTX3M
Get full information๏ผtechexplorations.com/kicad/kicad-9-designing-a-4-layer-ioโฆ
#kicad9 #nextpcb #pcb #pcbdesign #dfm #pcbmanufacture -
KiCad PCB
@kicad_pcb
MakeIt or BreakIt Tech
@makeAtronix
Afternoons with Kicad.
-
KiCad PCB
@kicad_pcb
KiCon North America 2025 is happening May 28-30 kicon.kicad.org/na2025/
Come and join the conference on all things KiCad. Talk submissions currently being accepted. pretalx.kicad.org/kicon-na-2025/
For full details see the blog post on the KiCad website. www.kicad.org/blog/2025/02/KiCad-Conference-North-Americaโฆ
KiCad PCB
@kicad_pcb
Sorry for the repost. Forgot the links and image the first time and we don't spend your donations on paying for editing.
-
KiCad PCB
@kicad_pcb
KiCon North America 2025
Come and join the conference on all things KiCad. For full details see the blog post on the KiCad website.
www.kicad.org/blog/2025/02/KiCad-Conference-North-Americaโฆ -
KiCad PCB
@kicad_pcb
Thanks to @HQ_NextPCB for helping to build some amazing software with us. We're thrilled that they have offered to match your donations to the KiCad project during the current fund drive. Together, we all go further! www.kicad.org
NextPCB
@HQ_NextPCB
๐ NextPCB & @kicad_pcb : A Partnership Built on Open-Source Passion! ๐
As a Platinum Sponsor, NextPCB is proud to partner with KiCad to revolutionize PCB design.๐ค Together, we're bridging open-source excellence with cutting-edge manufacturing, empowering engineers to turn ideas into reality!
Learn more:www.nextpcb.com/blog/nextpcb-partnership-with-kicad
๐ง NextPCB's FREE HQDFM tool tackles 150+ DFM issues + offers panelization, impedance calculators & more: www.nextpcb.com/dfm
#opensource #kicad #nextpcb #pcb -
KiCad PCB reposted
Eli Hughes
@emh203
@kicad_pcb http libraries are an *enterprise* feature.
I just completed a proof of concept library migration from Altium to KiCad 9. All 9.3k parts: symbols, footprints and 3d models. Still a little work to be done and some things to iron out , but one script can completely migrate and keep everything in sync.
http libraries allow you to store company part meta-data behind an HTTP API. This means you can also pull in all of the part parameters (internal part numbers, manufacturer part numbers, alternatives) from your own internal PDM system. No expensive "365" walled gardens of doom.
As of right now I can have a single source of truth for both Altium and KiCad, allowing me to use either tool.
@wavenumber_llc will be contributing code/resources through 2025 to help further improve this capability. -
KiCad PCB
@kicad_pcb
This weekend, I (Seth) responded to some posts that tagged the KiCad social media accounts. In them, I referred to "we", implying an official response by the KiCad project.
Post not available here, view on X
KiCad PCB
@kicad_pcb
The KiCad project includes people who are strongly opposed to military in all its forms and the project also includes military veterans as well as people who work for defense contractors.
KiCad PCB
@kicad_pcb
We have a policy (www.kicad.org/contribute/code-of-conduct/) of welcoming everyone to the KiCad community. Where my posts fell short of this policy, I apologize.
-
KiCad PCB reposted
Phoronix
@phoronix
KiCad 9.0 Released For Advancing Open-Source EDA
www.phoronix.com/news/KiCad-9.0-Released -
KiCad PCB reposted
NextPCB
@HQ_NextPCB
๐ Congratulations to the @kicad_pcb Team and contributors on the official launch of KiCad 9 today!
Let's take a look at some of the ๐ฅexciting new features ๐ฅin the long-awaited release:
1. Multi-Channel Design: By introducing schematic rule areas and the Component Class feature, KiCad 9 now supports multi-channel design not only for sheets but also for any localized section within the schematic. Say goodbye to the Replicate Layout plugin! ๐
2. Schematic design block: This feature allows you to save a part or the entire schematic directly as a module in a centralized location. In the future, when you need a similar circuit design is needed, it can be directly accessed from theย design module panel.
3. Jobsets: This allows the predefinition of job sets for exporting KiCad data from schematics and PCBs, automating final deliverables and enabling reusable job set files for consistent output pipelines across projects.
Additionally, these features were developed by dedicated software engineers provided by NextPCB ๐ :
4. Zone Manager Tool: This feature allows users to view all copper pours on the PCB within a single UI and modify properties such as copper pour attributes and priority levels.
5.Sheet pin/hierarchical Label Synchronization Tool: provides management of sheet pins and their associated hierarchical labels instead of having to switch back and forth between the sheet and schematic.
6.ODB++ Export: Nearly a decade after it was first requested, KiCad 9 now supports ODB++ fabrication output in addition to Gerber and IPC-2581, which is essential for many manufacturing and simulation scenarios.
The KiCad community continues to push the boundaries of open-source electronic design, and this latest release is a testament to their dedication and innovation. ๐ฅณ Congratulations to the team, and here's to the continued success of this remarkable project!
Let's look forward to the launch! โจ
www.kicad.org/blog/2025/02/Version-9.0.0-Released/
#kicad9 #pcbdesign #nextpc #pcb -
KiCad PCB
@kicad_pcb
So, now that v9 is out, you're going to want to learn how to use all the awesome new features, right?
Have we got a place for you! kicon.kicad.org
KiCon Returns to North America, May 28-30th, San Diego, CA. Pre-sale discount tickets are available now! -
KiCad PCB
@kicad_pcb
KiCad Version 9.0.0 Release
The KiCad project is proud to announce the latest major version stable release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2025/02/Version-9.0.0-Released/ -
KiCad PCB
@kicad_pcb
Did you hear the news? Builds happening now...
gitlab.com/kicad/code/kicad/-/commit/286b0611feca00727bf7โฆ -
KiCad PCB
@kicad_pcb
Fresh from FOSDEM, we have a new shirt design at the KiCad store shop.kicad.org/products/bobafet-cotton-t-shirt
Make sure that you know all your different kinds of FETs. -
KiCad PCB
@kicad_pcb
KiCad Version 8.0.9 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2025/02/KiCad-8.0.9-Release/ -
KiCad PCB
@kicad_pcb
KiCad Version 8.0.9 Release Candidate 1 Available
See the blog post KiCad website for more details.
www.kicad.org/blog/2025/02/KiCad-Version-8.0.9-Release-Caโฆ -
KiCad PCB
@kicad_pcb
Calling all AppImage experts! This should be easy, we know. Unfortunately, bundling a working Python interpreter to support wxPython has proved to be a stumbling block for us (Dammit Jim, we're C++ programmers, not Pythonists!)
Maybe you have the expertise we need?
KiCad PCB
@kicad_pcb
We'd love to get the tooling in place to produce AppImages for our daily builds. We actually have an open paid job for anyone who can build this for us. โฌ1k to set up an AppImage build pipeline on our GitLab CI. e-mail tasks@kicad.org if you know anyone interested.
-
KiCad PCB
@kicad_pcb
Stable version 9.0.0-rc3 available
See the the release announcement blog post for details.
www.kicad.org/blog/2025/02/KiCad-Version-9.0.0-Release-CaโฆPost not available here, view on X
KiCad PCB
@kicad_pcb
We'd love to get the tooling in place to produce AppImages for our daily builds. We actually have an open paid job for anyone who can build this for us. โฌ1k to set up an AppImage build pipeline on our GitLab CI. e-mail tasks@kicad.org if you know anyone interested.
-
KiCad PCB
@kicad_pcb
KiCad: Fรผr groรe wie kleine Unternehmen.
-
KiCad PCB
@kicad_pcb
Setting up at FOSDEM with the awesome @freecad.bsky.social folks!
-
KiCad PCB
@kicad_pcb
Are you going to be around Brussels for FOSDEM? Want to learn more about coding KiCad? We are hosting a (3rd annual) Learn to Code KiCad Day. Stop by and join us. There is coffee, snacks and lunch provided. Sign up here: forms.gle/dE9cxmeySEN7AGss7
-
KiCad PCB
@kicad_pcb
The KiCad project is excited to announce the second release candidate for the next major version 9.0.0 is available for testing. Version 9.0.0 is expected to be released by the end of January 2025.
The list of new features can be found at forum.kicad.info/t/post-v8-new-features-and-development-nโฆ -
KiCad PCB
@kicad_pcb
KiCad Version 8.0.8 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2025/01/KiCad-8.0.8-Release/ -
KiCad PCB
@kicad_pcb
The KiCad project is excited to announce the first release candidate for the next major version is available for testing. Version 9.0.0 is expected to be released by 01/31/25.
New features can be found here forum.kicad.info/t/post-v8-new-features-and-development-nโฆ
Packages are available www.kicad.org/download/ -
KiCad PCB reposted
concretedog @concretedog@mastodon.social
@concreted0g
Super excited to have my #opensource #rocketry talk accepted for @fosdem .. there'll be loads of talk of @FreeCADNews @kicad_pcb #openrocket and many mentions for @DavesRocketShop :)
-
KiCad PCB
@kicad_pcb
Just in time for KiCad's 2024 End of Year funding campaign, we have new 2025 sustainer-level t-shirts available, designed by the amazing Mellin Paulo Bernardo. The new shirts are upgraded with 100% soft, organic cotton.
Get yours today at donate.kicad.org -
KiCad PCB
@kicad_pcb
KiCad Version 8.0.7 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
The mirrors will be up soon.
www.kicad.org/blog/2024/12/KiCad-8.0.7-Release/ -
KiCad PCB
@kicad_pcb
Congratulations to @FreeCADNews on this milestone!
FreeCAD (CAD+CAM+CAE)
@FreeCADNews
#freecad 1.0 Open-Source 3D Parametric Modeler Released!
youtu.be/x5oXSGhK7EY -
KiCad PCB
@kicad_pcb
KiCad lead developer @SethHillbrand talks with @SierraCircuits ' Amit Bahl on Trace Talks Ep 5. www.youtube.com/watch?v=oT4eeke-GsQ
-
KiCad PCB
@kicad_pcb
Hi Folks! We have an open call for participation at FOSDEM, Open Hardware/CAD CAM devroom. lists.fosdem.org/pipermail/fosdem/2024q4/003569.html
You can submit a talk at pretalx.fosdem.org/fosdem-2025/cfp
DM with any questions. Or suggestions for who you'd like to hear presenting at FOSDEM! -
KiCad PCB reposted
NextPCB
@HQ_NextPCB
๐ @kicad_pcb, in collaboration with HQ Electronics, is proud to host #kicon Asia 2024 - an exclusive two-day event for anyone passionate about #kicad.
๐ New to this year's KiCon, join us on 14th November in Shenzhen, China, for a full day of KiCad training sessions personally led by KiCad lead developer @SethHillbrand. Let Seth guide you through advanced KiCad techniques, tips, and tricks with the latest KiCad release.
โ Whether you're a seasoned KiCad user or just getting started, this event is the perfect opportunity to take your skills to the next level. Network with fellow designers, discover new techniques and unlock the true potential of this open-source PCB design software.
Don't miss out on this exceptional opportunity. Spots are limited. Click the link below to secure your seat today!
๐ Get your Ticket now: kicon.kicad.org/asia2024/en/
#hqelectronics #nextpcb #kicad #kicon #kiconasia #pcb #pcba -
KiCad PCB
@kicad_pcb
KiCad Version 8.0.6 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
The mirrors will be up soon.
www.kicad.org/blog/2024/10/KiCad-8.0.6-Release/ -
KiCad PCB
@kicad_pcb
#kicad at #pcbwest today (booth 614). Stop by and say hi, get some swag, try out version 9.
KiCad PCB
@kicad_pcb
We were lucky to be placed next to @PCBWayOfficial and Anson Bao. It was a great convention; thanks to everyone we had the opportunity to talk with today! Number 1 question: "How is KiCad here!?!" Maybe worth a blog post later
-
KiCad PCB
@kicad_pcb
KiCad at PCB West
The KiCad project will have a exhibition booth at PCB West on Wednesday, October 9th. If you are attending the exhibition, feel free to stop by and chat with members of the lead development team.
pcbwest.com -
KiCad PCB
@kicad_pcb
We're slowly posting videos from KiCon Europe 2024. Starting with Wayne Stambaugh's Keynote. One every couple days until we're done.
Thank you to Open Skunkforce e.V. for hosting this event in beautiful Bochum, Germany.
youtu.be/BP8VD9FviWk -
KiCad PCB
@kicad_pcb
Coming Soon!
www.youtube.com/watch?v=6uqEPaKcEeM -
KiCad PCB
@kicad_pcb
KiCad Version 8.0.5 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
The mirrors will be up soon.
www.kicad.org/blog/2024/09/KiCad-8.0.5-Release/ -
KiCad PCB
@kicad_pcb
KiCon Europe 2024 Talks schedule posted. See you all there! pretalx.kicad.org/kicon-europe-2024/schedule/
-
KiCad PCB
@kicad_pcb
The mirrors are still updating the 8.0.4 packages. They will be available soon.
-
KiCad PCB
@kicad_pcb
KiCad Version 8.0.4 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2024/07/KiCad-8.0.4-Release/ -
KiCad PCB
@kicad_pcb
This is us. If you are in the area, stop by and check out all the things going into KiCad today!
PCEA Printed Circuit Engineering Association
@PCEAssociation
Pleased to welcome @kicad_pcb as an exhibitor at @PCBWest! Learn more about their #eda suite at the largest exhibition and conference for #pcbdesign, #pcbfabrication, and #pcbassembly in the #siliconvalley.
#pcblayout #electronics #schematiccapture #pcbdesignsoftware -
KiCad PCB
@kicad_pcb
๐ฅณ Congratulations @altium ! Let us know if you run into problems (we have some stress test boards with lesser known features). We want people using KiCad designs to have a great experience, no matter where they work. More designers in the industry == better for everyone!
Altium
@altium
With Altium Designer 24.6 you can import KiCad designs from versions 7 and 8, ensuring a smooth transition and reducing manual tasks.
Learn more: www.altium.com/documentation/altium-designer/new
#altiumdesigner #kicad #electronicdesign -
KiCad PCB
@kicad_pcb
Want to help other businesses discover KiCad? Check out this graph from www.g2.com. If you use KiCad for your business, leave us a review and help other businesses learn that they are not locked into the SaaS models being offered.
-
KiCad PCB
@kicad_pcb
We're sending out invitations for the last few speaking slots at KiCon Europe (pretix.eu/kicad/kiconeurope2024/). Who do you want to hear from this year? Tag them here or let us know at kicon@kicad.org. Should it be you? The application link is at pretalx.kicad.org
-
KiCad PCB reposted
James
@baldengineer
Impressive @kicad_pcb v8 stats from Wayne (project lead) presented at #teardown2024
-
KiCad PCB
@kicad_pcb
KiCon Europe 2024 is happening! September 19-20 in Bochum, Germany. September 18 is an add-on training day for companies that want to get their engineers some extra KiCad training straight from the experts.
Tickets: pretix.eu/kicad/kiconeurope2024/
KiCad PCB
@kicad_pcb
Want a free ticket? Want to share your KiCad chops with the world? Submit your talk at pretalx.kicad.org/kicon-europe-2024/cfp
KiCad PCB
@kicad_pcb
-
KiCad PCB
@kicad_pcb
There are many excellent things about working on the world's most popular EDA tool. But the best day is always when we get to send out the Thank Yous. Once a year, we send a thank you letter and sticker to everyone who helped us build KiCad in the past year.
KiCad PCB
@kicad_pcb
This year, we are sending out more than 230 letters and stickers. These are only the people who have opted-in out of the hundreds more who have worked to make KiCad better than ever this year. Thank you!
KiCad PCB
@kicad_pcb
If you don't get your letter, let us know and we'll send you another. Each year, 3-4 get returned so we want to make sure you get your sticker!
KiCad PCB
@kicad_pcb
Alternatively you can meet us at KiCon this year (pretix.eu/kicad/kiconeurope2024/) and we'll hand it to you in person. Shh! KiCon is a soft launch right now, so you will find special pricing at the moment
-
KiCad PCB
@kicad_pcb
KiCad Version 8.0.3 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2024/06/KiCad-8.0.3-Release/ -
KiCad PCB reposted
AISLER
@AislerHQ
We use the mount type of footprints to plan and calculate the PCB assembly. That why it is important to set them correctly.
Learn how you can do that in KiCad:
community.aisler.net/t/setting-the-mount-type-of-a-componโฆ -
KiCad PCB
@kicad_pcb
KiCad Like a Pro is an excellent, comprehensive companion to KiCad v8. Thanks to @txplore and @HQ_NextPCB for putting together this offer.
NextPCB
@HQ_NextPCB
HQ NextPCB is honored to support Dr. Peter Dalmaris
@txplore in his momentous task of updating the KiCad Like a Pro series. Now with the completion of KiCad Like a Pro, 4th Edition for KiCad 8 @kicad_pcb, Peter and NextPCB are proud to offer an exclusive 20% off on the ebook and video course to our community.
Visit the link below and type in NEXTPCB20 to enjoy the special treat
More info: techexplorations.com/so/kicad-like-a-pro-4th-edition/
#kicad #techexplorations #nextpcb #pcbdesign #pcb -
KiCad PCB reposted
gojimmypi
@gojimmypi
I met with the awesome folks @crowd_supply today; also learned they have a dedicated @kicad_pcb page! So many cool projects...โค๏ธ www.crowdsupply.com/kicad
-
KiCad PCB
@kicad_pcb
Thank you to everyone who has donated so far! We were able to send out more than 200 supporter t-shirts this year, with another 120 on the way! We also sent these shirts to our monthly supporters who have an existing donation subscription.
KiCad PCB
@kicad_pcb
Weโฃ๏ธour supporters! KiCad is driven by the designers, engineers, makers and YOU that collectively define our community.
As a thank you for our sustaining members that make monthly donations, KiCad Services is sponsoring the 2024 Supporter t-shirt. donate.kicad.org
KiCad PCB
@kicad_pcb
If you are an existing subscriber and you haven't received an e-mail asking for your size (or you replied and haven't received your t-shirt), e-mail us at donations@kicad.org
KiCad PCB
@kicad_pcb
If YOU would like a KiCad supporter t-shirt, there's still time! Hop over to donate.kicad.org to get yours today. Note, we also have women's cut shirts. If you'd like yours in a women's cut, e-mail us after donating and we'll make sure you receive one that looks great!
-
KiCad PCB
@kicad_pcb
KiCad Version 8.0.2 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2024/04/KiCad-8.0.2-Release/ -
KiCad PCB reposted
lina2epy.bsky.social ๐ค๐ณ๏ธโโง๏ธ
@Lina2EPy
Hii I made a thing again in addition to @kicad_pcb #github action I now made a pipeline and a job template for #gitlab so now you can also render 3D images of your PCBs on GitLab. Also, I made some small improvements to the GitHub Action
gitlab.com/linalinn/kicad-render -
KiCad PCB
@kicad_pcb
In light of recent global economic trends and the inflationary pressures that have affected all economies, we at KiCad have arrived at a difficult decision.
www.kicad.org/blog/2024/04/KiCads-Historic-Price-Increaseโฆ
KiCad PCB
@kicad_pcb
After much deliberation and extensive analysis, we are announcing our first ever price increase of 50% for downloading KiCad.
Post not available here, view on X
KiCad PCB
@kicad_pcb
Jokes aside, this is a reminder of the value of open-source software. While commercial software continues to move toward higher prices, outpacing inflation and outstripping the actual value of their upgrades, KiCad stands as a bastion of accessibility and affordability.
KiCad PCB
@kicad_pcb
So fear not, the price of your next KiCad download will continue to be free, a price point that we've maintained for over 30 years. Hereโs to the legacy and success of open-source initiatives like KiCad, which prove that the best things in life (and in software) are indeed free
-
KiCad PCB reposted
lina2epy.bsky.social ๐ค๐ณ๏ธโโง๏ธ
@Lina2EPy
So I made a thing that might be interesting for anyone who uses GitHub to host their @kicad_pcb projects it's a small Github Actions (WIP) that uses the #kicad nightly docker image to render a PCB image via the kicad-cli.
-
KiCad PCB
@kicad_pcb
KiCad Version 8.0.1 Released
The KiCad project is proud to announce the latest version 8 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2024/03/KiCad-8.0.1-Release/ -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Received my @kicad_pcb supporter t-shirt ๐ฅฐ
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Love complaining and/or voicing your opinion? Great!
The @kicad_pcb team has a survey running to get more info about how people use KiCad and other design tools, and what they like and dislike about them. The survey will run until May.
app.formbricks.com/s/clt62soc802ap12xtbfroodc6 -
KiCad PCB
@kicad_pcb
Learn how to use ngspice in KiCad8 with Holger Vogt, the lead developer of ngspice.
www.youtube.com/watch?v=dMuMCdSWAGk -
KiCad PCB
@kicad_pcb
Weโฃ๏ธour supporters! KiCad is driven by the designers, engineers, makers and YOU that collectively define our community.
As a thank you for our sustaining members that make monthly donations, KiCad Services is sponsoring the 2024 Supporter t-shirt. donate.kicad.org -
KiCad PCB
@kicad_pcb
KiCad Version 8.0.0 Released
The KiCad project is proud to announce the latest major version 8 has been released. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2024/02/Version-8.0.0-Released/ -
KiCad PCB
@kicad_pcb
Each year, KiCad Services commissions a new sticker design for contributors. This year, we had more than 280 contributors help build the next version of KiCad!
If you didn't receive the e-mail, asking where you would like your KiCad 8 sticker to be sent, please let us know! -
KiCad PCB
@kicad_pcb
KiCad Version 7.0.11 Released
The KiCad project is proud to announce the latest version 7 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2024/02/KiCad-7.0.11-Release/ -
KiCad PCB
@kicad_pcb
Version 8 Release Candidate 3 is Available
Packages are now available for the upcoming version 8 release of KiCad. This upcoming stable release contains many new features and improvements over the version 7 of KiCad.
www.kicad.org/blog/2024/02/KiCad-Version-8-Release-Candidโฆ -
KiCad PCB reposted
Part-DB
@Part_DB
Part-DB is now featured on the "external tools" page of the official @kicad_pcb website ๐:
www.kicad.org/external-tools/
Use your Part-DB inventory database as a library inside #kicad with the new HTTP library feature of KiCad 8.
#electronics #opensource #development #eda #php -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Wayne is giving the @kicad_pcb Project Status right now at #fosdem
-
KiCad PCB
@kicad_pcb
Thanks to everyone that attended the Learn to Code KiCad event. Much code. So Spaร.
KiCad PCB
@kicad_pcb
-
KiCad PCB
@kicad_pcb
Kicad Learn to Code Day is happening now.ย ย Live stream at www.youtube.com/live/6SMzC4wLBHg
KiCad PCB
@kicad_pcb
Ian McInerney discussing the internals of KiCad tool framework
KiCad PCB
@kicad_pcb
Jon Evans discusses how to handle settings/preferences
KiCad PCB
@kicad_pcb
Wayne Stambaugh covers the intricacies of Symbol Instances
KiCad PCB
@kicad_pcb
Final talk of the day www.youtube.com/live/FF0aqyVzsYA
Tomasz provides an introduction to the push and shove router
KiCad PCB
@kicad_pcb
Wayne Stambaugh covers schematic sheet instance data
-
KiCad PCB reposted
envox
@envox
LibreTimeBase: An #opensource #openhardware Controller & Distribution Amplifier for Rubidium Frequency Standards in #benchbox3 EEZ-DIB form factor is coming...
bitbucket.org/christandlg/libretimebase/src/main/๐
#openscience #maker -
KiCad PCB
@kicad_pcb
We're 1/5th of the way to our 2024 goal! Thank you to everyone who has contributed to help support the development of KiCad. We've also sent out over 50 special edition t-shirts to our sustaining supporters. You can snag one yourself. Just head over to donate.kicad.org
-
KiCad PCB reposted
AISLER
@AislerHQ
It is great to see how many of our users design their project using @kicad_pcb, they accounted for 42.25% of all projects created last month. @ADSKEAGLE comes second place with 12.44% and Fritzing ranks 3rd with 12.29%
-
KiCad PCB
@kicad_pcb
Version 8 Release Candidate 2 is Available
Packages are now available for the upcoming version 8 release of KiCad. Please consider downloading and testing this version so we can fix any serious bugs before releasing 8.0.0.
www.kicad.org/blog/2024/01/KiCad-Version-8-Release-Candidโฆ -
KiCad PCB reposted
Chris McKernan
@chrismck_twit
I know times are tough, we can likely all afford something to help support the bestest (it's a word I swear) PCB Design Suite out there: @kicad_pcb - no matter how small, in the end it makes a difference. ๐๐ donate.kicad.org Thank You to the dev team and contributors!
-
KiCad PCB
@kicad_pcb
Version 8 Release Candidate 1 is Available
Packages are now available for the upcoming version 8 release of KiCad. This upcoming stable release contains many new features and improvements over the version 7 of KiCad.
Enjoy,
The KiCad Development Team
www.kicad.org/download/ -
KiCad PCB
@kicad_pcb
Do you have a KiCad project that you are particularly proud of? Want to share it with the wider community? KiCad is currently accepting submissions to include in our 'demos' that are distributed with KiCad. Send your archived KiCad v7 or later project to demos@kicad.org
-
KiCad PCB
@kicad_pcb
KiCad has started our annual funding drive to support v9 development in the upcoming year!
www.kicad.org/blog/2024/01/2023-End-of-Year-Fund-Drive/
This year, we are offering a special edition, KiCad supporter t-shirt to our sustaining monthly sponsors. donate.kicad.org -
KiCad PCB
@kicad_pcb
KiCad Version 7.0.10 Released
The KiCad project is proud to announce the latest version 7 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2023/12/KiCad-7.0.10-Release/ -
KiCad PCB reposted
Barbatronic
@barbatronic
Hop ! Carte PAMI routรฉe sur @kicad_pcb . Je vais attendre un peu avant de l'envoyer en prod chez @AislerHQ .
En attendant, on va retourner ร la modรฉ sous @FreeCADNews pour intรฉgrer les modifications du PCB ๐
#cdr2024 -
KiCad PCB reposted
Fasani Corp.
@martinfasani
Interesting #kicad 7 workflow for git that builds automatically all fabrication files like Gerbers, BOM etc and deploys that on a website
github.com/vroland/epdiy-hardware/blob/main/.github/workfโฆ
CC @JLCPCB @kicad_pcb -
KiCad PCB reposted
Reginaldo Prado
@eng_reginaldo
Product design and 3D modeling using KiCAD & FreeCAD
@kicad_pcb @FreeCADNews @EspressifSystem
#engineering #iot -
KiCad PCB reposted
Miguel รngel Ajo
@mangel_ajo
Finishing a new revision of the jumpstarter.dev board, incorporating fixes and feedback from 1.0.0 . Jumpstarter enables #hil testing and developing on Edge devices, making it as easy as the regular cloud workflows!. Test your devices on Github, Gitlab, Tekton, etc..
-
KiCad PCB reposted
NextPCB
@HQ_NextPCB
Couldn't make it to KiCon Asia? Here are the highlights:
www.nextpcb.com/blog/kicon-asia-2023-wrap-up
#opensource #pcb #pcbdesign #kicad -
KiCad PCB reposted
James
@baldengineer
Mega IIeโs final PCB is a 4-layer board, making this Apple IIe-compatible about the size of a 5.25-inch floppy drive! It took over 20 PCBs, and that was possible because of @kicad_pcb!
What an incredible design tool that continues to get even better. github.com/baldengineer/mega-IIe -
KiCad PCB reposted
Antmicro
@antmicro
Announcing gerber2ems - an #opensource script integrating @kicad_pcb with #openems, suitable for high frequency HW design, with 3D visualization in @Blender. Control your signal integrity analysis with our customized solutions: antmicro.com/blog/2023/11/open-source-signal-integrity-anโฆ
-
KiCad PCB
@kicad_pcb
KiCon Asia starting today in Shenzhen China. Thanks to @HQ_NextPCB for sponsoring and leading this inaugural event!
Post not available here, view on X
KiCad PCB
@kicad_pcb
Lots of good talks on AI in electronics at KiCon Asia
KiCad PCB
@kicad_pcb
Designing flip chip packages in KiCad. Seriously impressive work by Huang Rui from AIoT Chips
KiCad PCB
@kicad_pcb
One more picture of Huang Rui's work
KiCad PCB
@kicad_pcb
Designing KiCad plugins by Zhuang Jiezhi of @HQ_NextPCB
-
KiCad PCB
@kicad_pcb
KiCad Version 7.0.9 Released
The KiCad project is proud to announce the latest version 7 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2023/11/KiCad-7.0.9-Release/ -
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
If you're at #hackaday #supercon come see my talk about sharing @kicad_pcb projects on the web. It's at 4pm in the DesignLab!
-
KiCad PCB reposted
Gideon Mugo
@GidionMugo
ESP32-C6-WROOM board for motor control. It has been designed and manufactured. Now it is time to test it. Thank you @kicad_pcb and @PCBWayOfficial
#pcb #embedded #esp32 -
KiCad PCB reposted
Fasani Corp.
@martinfasani
I learnt KiCad quite fast. I'm dumb in electronics design and routing, but I'm good in planning and logistics. So after learning the hard way I was designing my own PCBs.
As I was already fascinated by displays my first designs where just small SPI adapters -
KiCad PCB reposted
Sipeed
@SipeedLab
Browse SCH/PCB on #kicad with #riscv LicheeConsole4A~
check it out: sipeed.com/licheepi4a -
KiCad PCB reposted
Adam Taylor
@ATaylorFPGA
A little look at something we are working on Spartan 7 based dev board with a RPi 2040. To be supported by a 100 days of embedded system development course. All open source and free. Boards should be in soon, now to write the embedded system course its based on it.
-
KiCad PCB reposted
Remote QTH
@RemoteQTH
New 3D print APRS WX station KIT
remoteqth.com/w/doku.php?id=3d_print_aprs_wx_station
Connected by ethernet and powered via POE, with many more features...
@openscad + @kicad_pcb + @Prusa3D + @arduino + @aprsfi =โฅ๏ธ -
KiCad PCB
@kicad_pcb
KiCad Version 7.0.8 Released
The KiCad project is proud to announce the latest version 7 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2023/09/KiCad-7.0.8-Release/ -
KiCad PCB
@kicad_pcb
Congratulations to Urban and the LibrePCB team!
LibrePCB
@LibrePCB
We are happy to announce the release of #librepcb 1.0, including:
- 3D viewer & STEP export
- MPN management & assembly variants
- Unified production data files generator
- Thermal relief pads
- Keepout zones
- Custom pad shapes
...and much more!
librepcb.org/blog/2023-09-24_release_1.0.0/ -
KiCad PCB
@kicad_pcb
KiCon Asia is coming! Sun, Nov 12 in Shenzhen, China at the Aliyun Innovation Center. Tickets are available now.
kicon.kicad.org/kicon-asia-2023/ -
KiCad PCB
@kicad_pcb
Designing a new gerber comparison tool with Andrew Whyte at KiCon 2023
www.youtube.com/watch?v=PAm65BVg834 -
KiCad PCB
@kicad_pcb
Make your own KiCad footprints and models using KiCad's built-in generator and external scripts with @SethHillbrand's presenation at #kicon2023. You can find the latest version of KiCad at kicad.org
youtu.be/hpkzoAAmWJY -
KiCad PCB
@kicad_pcb
Learn about Database Libraries from @joncraftyjon's presentation at @kicon2023. If you would like to try out using KiCad's database libraries, you can find the latest version of KiCad at kicad.org
www.youtube.com/watch?v=nZqoay-Yevk -
KiCad PCB
@kicad_pcb
The first talk from #kicon2023 is now available. If you want to try out the features listed in this talk, you can find the latest version of KiCad at www.kicad.org
www.youtube.com/watch?v=4qbjNLV-h14 -
KiCad PCB reposted
Jerry Giant
@tty0x24
looks better.
-
KiCad PCB
@kicad_pcb
Talks schedule for KiCon 2023 is up. Some last minute tickets still available at kicon.kicad.org
We look forward to seeing everyone in A Coruรฑa next month! -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
KiCad nightly recently added Appearance Manager to the 3D Viewer ๐
-
KiCad PCB reposted
Anne Barela
@anne_engineer
Reveal! My current @adafruit PCB art project! My take on a Star Trek touch screen LCARS door panel. Lower buttons are capacitive & they light reverse mount LEDs on each button via a AT42QT1070 chip. Made in @kicad_pcb via @wntrblm Gingerbread for art. More on Show & Tell Friday!
-
KiCad PCB
@kicad_pcb
KiCad Version 7.0.7 Released
The KiCad project is proud to announce the latest version 7 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2023/08/KiCad-7.0.7-Release/ -
KiCad PCB reposted
Sebastian Staacks
@diconx
GB Interceptor v1.2.0 is out now!
- MJPEG encoding
- Full MacOS support
- 60fps mode
(almost the same as the last beta)
github.com/Staacks/gbinterceptor/releases/tag/v1.2.0 -
KiCad PCB
@kicad_pcb
Release candidate 1 of version 7.0.7 now available.
A release candidate for the next stable release of KiCad is now available for testing on the download page of the KiCad website. Any help with regression testing would be greatly appreciated.
www.kicad.org/download/ -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
All ready to start testing the PIC32MX customized mPCIe module in the base board, both boards are hand-assembled four-layer PCBs designed in @kicad_pcb and manufactured by @JLCPCB .
Time to start using the new @MicrochipTech PICKit 5 In-Circuit Debugger.
@MicrochipMakes -
KiCad PCB reposted
Barbatronic
@barbatronic
Les PCB pour la Coupe de robotique 2024 de notre partenaire @AislerHQ sont arrivรฉs !
On s'en parle ce soir en live sur twitch.tv/barbatroniclive ร 21h ! Et on continuera la CAO sous #freecad รฉgalement !
From CAD #kicad to reality #aisler ! -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
This is the second time in 2 projects I choose the #rak3172 . Super easy to solder, @kicad_pcb footprints and 3d files, CE UK approved. Not expensive. We use it for #sharpikeebo
-
KiCad PCB
@kicad_pcb
KiCad Version 7.0.6 Released
The KiCad project is proud to announce the latest version 7 bug fix release. See the blog post on the KiCad website for more information about this release.
www.kicad.org/blog/2023/07/KiCad-7.0.6-Release/ -
KiCad PCB
@kicad_pcb
KiCad platinum sponsor HQ NextPCB has offered KiCad users a $30 discount for SMT PCB assembly orders of $50 or more using the coupon code KNEXTPCB. For every order that uses this code, NextPCB will donate $20 to the KiCad project.
www.nextpcb.com -
KiCad PCB
@kicad_pcb
The KiCad project welcomes our latest platinum sponsor HQ NextPCB. See the announcement on the KiCad blog.
www.kicad.org/blog/2023/06/HQ-NextPCB-Platinum-Sponsorship/ -
KiCad PCB reposted
Barbatronic
@barbatronic
Hello ! On se retrouve ce soir pour le dernier live avant une petite pause de Juin ! Au programme :
- PCB principal sur @kicad_pcb
- Intรฉgration dans @FreeCADNews
- Dรฉbut du routage pour production chez notre partenaire @AislerHQ !
RDV ร 21h sur www.twitch.tv/barbatroniclive -
KiCad PCB reposted
Machdyne UG
@machdyne
The Schoko #fpga computer PCB is now open-source. github.com/machdyne/schoko
-
KiCad PCB
@kicad_pcb
KiCad Version 7.0.5 Released
The KiCad project is proud to announce the latest version 7 bug fix release.
www.kicad.org/blog/2023/05/KiCad-7.0.5-Release/ -
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
KiCanvas is an open source, interactive, browser-based viewer for KiCAD schematics and boards- and now it's in ๐ public alpha ๐
Head over to my blog to learn more and try it out for yourself ๐งโโ๏ธ blog.thea.codes/introducing-kicanvas/ -
KiCad PCB reposted
Radiona_org - Zagreb Makerspace
@RadionaOrg
#ulx3s v3.1.8 - design switched to new @kicad_pcb board now has 6 layers and SerDes bank0 is now fully connected. We will start next production for @crowd_supply and @MouserElec soon(parts are on stock), first without SerDes parts until we get something interesting out of it...
-
KiCad PCB
@kicad_pcb
KiCad Version 7.0.2 Released
The KiCad project is proud to announce the latest version 7 bug fix release.
www.kicad.org/blog/2023/04/KiCad-7.0.2-Release/ -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
Super mini linux computer
-
KiCad PCB reposted
UNT Robotics
@UNTRobotics
Interested in learning how to design a PCB? This Wednesday weโre inviting a special guest with professional experience to guide you through designing your very own circuit board in KiCad! See you at Discovery Park F260 at 7pm!
-
KiCad PCB
@kicad_pcb
We're excited to announce KiCon23, our conference for KiCad professionals, designers and makers of all stripes! This year, we will be hosting it in A Coruรฑa, Spain on September 9-10.
Tickets available at kicon.kicad.org -
KiCad PCB reposted
WoolseyWorkshop
@WoolseyWorkshop
Our popular tutorial for Performing A Circuit Simulation In KiCad has now been updated for KiCad 7.
www.woolseyworkshop.com/2019/07/01/performing-a-circuit-sโฆ
@kicad_pcb #kicad #simulation -
KiCad PCB reposted
Alan Ravelo
@alanrav21
Test TPA3118 of Texas Instruments.
Prototipe PCB made in house. @kicad_pcb -
KiCad PCB reposted
Emil Fresk
@korken89
The @ublox version of the board is now mounted and ready to get it's first @rustembedded firmware to start version :D Designed in @kicad_pcb and PCBs from @JLCPCB
Project link: github.com/korken89/rusty-tracker/tree/ublox -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
#diy Small RJ45 cable tester (USB power supply)
-
KiCad PCB
@kicad_pcb
KiCad Version 7.0.1 Released
The KiCad project is proud to announce the latest version 7 bug fix release.
www.kicad.org/blog/2023/03/KiCad-7.0.1-Release/ -
KiCad PCB reposted
Hans Baier @hansfbaier@fosstodon.org
@hansfbaier
Ordered it! Final version.
MiSTeX cape, featuring the @SipeedIO Lichee RV, for the terasic DECA board. Enables us to run a fork of the MiSTer framework.
github.com/MiSTeX-devel/MiSTeX-hardware
#pcb #kicad #opensource #riscv -
KiCad PCB
@kicad_pcb
Have a listen to the @hackaday podcast where they discuss (among other things) the newest #kicad release.
FWIW, the correct pronunciation is 'kiหหkรฆd
hackaday.com/2023/02/17/hackaday-podcast-206-busted-cryptโฆ -
KiCad PCB
@kicad_pcb
The KiCad project is proud to announce the first major release since version 6 was release just over a year ago. Version 7.0.0 has officially been released and is available for download.
www.kicad.org/blog/2023/02/Version-7.0.0-Released/ -
KiCad PCB
@kicad_pcb
KiCad Version 6.0.11 Released
The KiCad project is proud to announce the latest version 6 bug fix release.
www.kicad.org/blog/2023/01/KiCad-6.0.11-Release/ -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
.@kicad_pcb is collecting preferences (US vs non-US) and looking for help scouting this year's #kicon location.
If you're likely to attend this year, make sure to make your voice heard!
You can express your opinion or volunteer help on the KiCad Discord:
discord.com/channels/502708194179809281/10650306279440385โฆ -
KiCad PCB reposted
Lev Popov
@levpopov
Currently in the "find out" (if it works) stage. Still amazes me that you can just mess around on your laptop and then hold a real part in your hands a few days later. @kicad_pcb and @jlcpcb are so good.
-
KiCad PCB reposted
Chrismettal - Binary-6
@Chrismettal
So much for a quick 2-day adventure..
PCB is almost done, getting ready to order and finish the case!
Love that @FreeCADNews @kicad_pcb interconnectivity.
#flipperzero -
KiCad PCB reposted
Greg
@GregDavill
Some crisp from PCBs
Designed in @kicad_pcb and supplied by @PCBWayOfficial ๐ -
KiCad PCB
@kicad_pcb
Version 7 release candidate 1 is now available.
The KiCad project is excited to announce the first version 7 release candidate for testing.
www.kicad.org/blog/2023/01/KiCad-Version-7-Release-Candidโฆ -
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
Okay! ๐
I want to spend the new few months focusing on building an interactive, open source, browser-based KiCAD file viewer.
I'm looking for sponsorship to make that happen, and I'd love if you'd consider it:
theacodes.notion.site/KiCanvas-3252a399e64a4d78b6c7309ea6โฆ
Sharing always appreciated ๐ -
KiCad PCB
@kicad_pcb
Development Highlight: December Edition
With only a month left before the version 7 release of KiCad, here is a sneak peek of some of the new features added since the last development highlight.
www.kicad.org/blog/2022/12/Development-Highlight-Decemberโฆ -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
A cool small board based on this mini stamp #linux #opensource @kicad_pcb
-
KiCad PCB
@kicad_pcb
KiCad Version 6.0.10 Released
The KiCad project is proud to announce the latest version 6 bug fix release.
www.kicad.org/blog/2022/12/KiCad-6.0.10-Release/ -
KiCad PCB
@kicad_pcb
The KiCad project would like to thank everyone who donated during the Raspberry Pi Ltd. matching period and Raspberry Pi Ltd. for matching the donations.
www.raspberrypi.com -
KiCad PCB
@kicad_pcb
End-of-year recap with the KiCad Project developers discussing 2022 happenings and looking ahead to 2023. Community members will have the opportunity to ask questions in the chat. Please note that the CET time is 6PM.
www.facebook.com/events/679903333859020
www.youtube.com/watch?v=iQrdXf7SLkw -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Design meets the reality, in this prototype for an industrial-embedded design with the @MicrochipTech PIC32MZ-W1 WFI32 module.
Designed using @kicad_pcb
PCB manufactured by @JLCPCB
All components on top and bottom placed manually.
@MicrochipMakes -
KiCad PCB
@kicad_pcb
We will be doing an end-of-year recap on Dec 17th with the developers of The KiCad Project. We'll discuss what happened in 2022 and looking ahead to 2023. There will also be a Q&A at the end. Two ways to join:
Facebook: www.facebook.com/events/679903333859020
YouTube: www.youtube.com/watch?v=iQrdXf7SLkw -
KiCad PCB
@kicad_pcb
Raspberry Pi Ltd is currently matching your donations during the year end funding drive.
www.raspberrypi.com -
KiCad PCB
@kicad_pcb
The KiCad project would like to thank everyone who donated during the KiCad Services Corporation matching period and the KiCad Services Corporation for matching the donations.
www.kipro-pcb.com -
KiCad PCB
@kicad_pcb
The KiCad project would like to thank everyone who donated during the Digi-Key matching period and Digi-Key for matching the donations.
www.digikey.com -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Another PCB Prototype to manually assemble, the base board for the @MicrochipTech WFI32 module modified mPCIe card.
4 layer PCB designed in @kicad_pcb and manufactured by @JLCPCB
@MicrochipMakes -
KiCad PCB reposted
Adam Wolf
@adamwwolf
Phew! That was a lot of work, but now we've got macOS Universal builds for @kicad_pcb! You can grab the first nightly here: downloads.kicad.org/kicad/macos/explore/nightlies/downloaโฆ
-
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Customized mPCIe card for an industrial-embedded design with the @MicrochipTech WFI32 module.
The design is 4 layer with impedance control and reference planes on the outside. Designed in @kicad_pcb and manufactured by @JLCPCB
@MicrochipMakes -
KiCad PCB reposted
Honza Mrรกzek
@yaqwsx_cz
If you use my alternative component catalog for @JLCPCB, I have sad news for you: it won't be updated as JLC PCB doesn't wish to. I am sad and disappointed by their decision, but I will respect it.
Details: blog.honzamrazek.cz/2022/12/jlcparts-falling-down-to-ashes/
If you care, you can let them know. -
KiCad PCB reposted
Piotr Zapart
@hexe_fx
1st project using the RP2040: USB MIDI to CV or potentiometer position converter. I want to automate effects having an expression pedal input using a MIDI track in DAW, sync various effects with the music. Made with @kicad_pcb and @FreeCADNews
-
KiCad PCB
@kicad_pcb
The 2022 end of year campaign has officially begun. Thank you to our first matching sponsor Digi-Key
www.digikey.com
See the KiCad website for more information on the end of year donation campaign and how to donate.
www.kicad.org/blog/2022/11/2022-End-of-Year-Fund-Drive/ -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
Making the final minor modifications to the #sharpikeebo pcb . Very last laps.
-
KiCad PCB reposted
chair.audio
@ChairAudio
New batch ordered from @jlcpcb, front-plate is an aluminum PCB. Made with โฅ๏ธ and @kicad_pcb
-
KiCad PCB reposted
Ivan Kuleshov
@Merocle
Fan Unit
Limited Overengineering edition.
I want to check several options on one board. It came out like Frankenstein's monster ๐
40x40x20 PWM fan, UART control from both blades, Power MUX, 2 temperature sensors, RP2040, 2 digital LEDs, and a physical button
#computeblade -
KiCad PCB
@kicad_pcb
2022 end of year funding campaign announcement.
It's that time of the year to start preparing for the upcoming version 7 stable release and version 8 development. See details in the link below.
www.kicad.org/blog/2022/11/2022-End-of-Year-Fund-Drive/ -
KiCad PCB reposted
Alex...mostly inactive or read only
@tinyledmatrix
Little USB-PD injector tool made with @AislerHQ PCB. I also designed a little #3dprinted case for it. The screw in the Image is a ultra tiny (M1.6).
-
KiCad PCB reposted
Alex Lynd
@AlexLynd
Woah! I just tried using the PCBDraw plugin for @kicad_pcb which creates sweet flattened vector art! Expect some sick ass Nugget diagrams coming soon ๐ผ
#usbnugget #wifinugget @HakCat_Tech -
KiCad PCB
@kicad_pcb
KiCad Version 6.0.9 Released
The KiCad project is proud to announce the latest version 6 bug fix release.
www.kicad.org/blog/2022/10/KiCad-6.0.9-Release/ -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
New ESP32S3 dev board @esp32s2
-
KiCad PCB reposted
Goran_Mahovlic
@GMahovlic
Firefly v1.5 now using @Raspberry_Pi Pico and can have RS485 module instead of chip.
-
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
Alright I'm done.
-
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
My handsome son.
-
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
PCB fairy came early!
-
KiCad PCB
@kicad_pcb
KiCad Version 6.0.8 Released
The KiCad project is proud to announce the seventh version 6 bug fix release.
www.kicad.org/blog/2022/09/KiCad-6.0.8-Release/ -
KiCad PCB reposted
Honza Mrรกzek
@yaqwsx_cz
It seems like they strip the "-" sign from the numbers. The workaround is to place the origin of the board in the bottom left corner, so all coordinates end up positive.
-
KiCad PCB reposted
Sean Hodgins
@idlehandsdev
Well that certainly simplifies things. @kicad_pcb
-
KiCad PCB reposted
Piotr Zapart
@hexe_fx
I must say i'm quite happy with the end result. Both in looks and the operation. Quad fully isolated USB->UART using @WCH_TECH CH344Q, ฯ141M31 isolators and off the shelf extruded alu enclosure. @Patrick_RISCV
-
KiCad PCB reposted
OK2UQL
@ok2uqlGabo
#dnesbastlim opto klicovac PTT mezi IC-705 a Xiegu XPA125B.Po nacteni for jsem byl docela rozpacity a nechtel poskodit ani Icom ani koncak,tak nezbylo, nez zbastlit neco domaciho, prvni kratkodobe testy jsou OK. Taky test DSP od @AislerHQ na jedno kliknuti z KiCAD :-)
-
KiCad PCB reposted
Goran_Mahovlic
@GMahovlic
Something like this? If you have some suggestions please let me know. Is it better to have two GPDI out, or we should have one IN? IN can only be low resolution :( Design of this board will board will be funded by @NLnetFDN
-
KiCad PCB reposted
Carlos Santisteban
@zuiko21
This is taking shape... #durangox #65c02 #mos6502 #homebrew #retrocomputing @kicad_pcb
-
KiCad PCB reposted
Konrad Beckmann
@kbeckmann
Welp! Here goes... RevA of Kilsyth, a quick and dirty ECP5 + FT600 board. It's the absolute alpha revision so I expect problems. Let's see how it turns out.
-
KiCad PCB reposted
A.T.O.M Robotics Lab
@atom_robotics_
Have a look at our super fun collab project with @hatchnhack!
A Temperature Controlled PCB Coaster based on the ESP12E Module and designed using @kicad_pcb.
github.com/atom-robotics-lab/Temp-Controlled-ESP-Smart-Coโฆ
#stemeducation #electronics #diy @instructables @Hacksterio @adafruit @hackaday -
KiCad PCB
@kicad_pcb
KiCad project awarded NLnet foundation grant.
www.kicad.org/blog/2022/09/KiCad-Project-Awarded-NLnet-Grโฆ -
KiCad PCB reposted
Piotr Zapart
@hexe_fx
Saturday project: @NordicTweets Power Profiler 2 logic port upgrade: bus buffer, EMI protection, internal references for the voltage translator. Hardware design for the PPK2 is open sourced. I was able to import the gerbers into @kicad_pcb and design an add on board around it.
-
KiCad PCB reposted
Carlos Eduardo (@carlosedp@fosstodon.org)
@carlosedp
Uploaded the complete project with @kicad_pcb files, readme and some documentation to github.com/carlosedp/QMTechBaseBoard
Let's engage in the Discussions to understand features to be added and removed to the base board. -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
This is the prototype of a Small, Low Cost & High Insulation industrial Modbus RTU Device.
Configurations are made using plug-in Serial to Telnet Module.
MCU is PIC18F25K42 from @MicrochipTech
Design in @kicad_pcb
PCB by @JLCPCB
@MicrochipMakes @HackerSpaceTech @Hacksterio -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Looks like @kicad_pcb #nightlylife is working on saving 3D viewports, it's not working quite yet, but will for sure be useful!
-
KiCad PCB reposted
Barbatronic
@barbatronic
Fin du live ! On a terminรฉ la carte principale du robot sur @kicad_pcb et intรฉgration dans @FreeCADNews dans notre robot ! รงa rend super bien ! Il faut que รงa fonctionne maintenant ๐
On se retrouve dans 2 ou 3 semaines aprรจs quelques jours de vacances ! A bientรดt !! -
KiCad PCB reposted
A (@andy@treehouse.systems)
@__andy99__
Next round was to create a PCB for Lora POE Transmitter for my custom Gateway. I've used @kicad_pcb again (without problems).
But now, I'm going to use @AislerHQ as a PCB manufacturer, hopefully they will do all the best... :). -
KiCad PCB
@kicad_pcb
KiCad Version 6.0.7 Released
The KiCad project is proud to announce the sixth version 6 bug fix release.
www.kicad.org/blog/2022/07/KiCad-6.0.7-Release/ -
KiCad PCB
@kicad_pcb
The KiCad project is moving to a new developer e-mail list server. You can subscribe to the new list by e-mailing devlist+subscribe@kicad.org
For details on this change, please visit www.kicad.org/blog/2022/07/New-Developer-Mailing-List/ -
KiCad PCB reposted
Jeremy Cook ๐ค
@JeremySCook
Picked up a PCB project I hadn't worked on in a month+
Weird how you forget a few things, but come up with other ideas that you wonder how you didn't think of earlier. -
KiCad PCB reposted
Kai Trumper Private
Sometimes you need new circuit boards. And sometimes youโre felling a little extra.
@AC4PCB @kicad_pcb3 media couldn't be displayed. See them on the original post. -
KiCad PCB reposted
diogo
@diogorsergio
Learning @kicad_pcb by designing a macro keypad to be used with a #teensy board. Routing is so satisfying.. #kicad6 #teensylc
-
KiCad PCB reposted
Sequoia Alexander (moved to bsky @sequoia.farm)
@TLAlexander
By the way all of this design was done in @kicad_pcb. Kicad is an excellent PCB design program, and if you have ever wanted to get in to PCB design or find a solid program to use, check out Kicad! It is free and open source so it will always be available to you and collaborators.
Sequoia Alexander (moved to bsky @sequoia.farm)
@TLAlexander
In design review I was asked to add thermistors (one bridge, two external) which also means three more single channel ADCs. I also added mounting holes, made it 10mm longer, added more high current copper, and used the curved traces plugin to "melt" the tracks. Done now I think!
-
KiCad PCB
@kicad_pcb
KiCad Version 6.0.6 Released
The KiCad project is proud to announce the fifth version 6 bug fix release.
www.kicad.org/blog/2022/06/KiCad-6.0.6-Release/ -
KiCad PCB reposted
Greg
@GregDavill
The API in KiCad 6 now supports python creating a DRC report. So I've added DRC check to KiZip. It won't export if there are errors.
The main purpose is a simple "1-click" UI to generate gerbers and then create a single zip archive in a single step.
github.com/gregdavill/KiZip -
KiCad PCB reposted
Michael Rangen
@RangenMichael
Designed with @kicad_pcb, my #rp2040 Dev Board is now available @tindie! It has a 4-layer stackup, USB-C, 16MB, and clear labels for easy prototyping with @CircuitPython and @micropython!
www.tindie.com/products/breadstick/rp2040-dev-board/ -
KiCad PCB reposted
Jeremy Cook ๐ค
@JeremySCook
New design on @kicad_pcb a tiny... ATtiny breakout - under 20mmx20mm - 3.2mm mounting hole looks huge ๐
-
KiCad PCB reposted
Sequoia Alexander (moved to bsky @sequoia.farm)
@TLAlexander
Initial layout of my RP2040 brushless motor controller is completed. It can control 2 motors w/encoders at 45A continuous for each motor up to 60 volts. It's exactly the same size as a credit card, 100% open source, & designed for JLCPCB assembly service.
github.com/Twisted-Fields/rp2040-motor-controller2 media couldn't be displayed. See them on the original post. -
KiCad PCB reposted
@joeycastillo@mastodon.social
@josecastillo
There are thirteen surface mount parts to solder on this board, plus the seven through-hole buttons and one through-hole battery holder. We've come a long way from the โkitchen sinkโ complexity of the very first design.
@joeycastillo@mastodon.social
@josecastillo
Meet the very first Open Book, in lovely @oshpark purple! A Feather-form SAMD51 board (inspired greatly by the @Adafruit PyBadge) with eInk screen, 8 buttons, headphone jack, STEMMA ports and more. Some things to fix in Rev 2 but itโs getting very close :) github.com/joeycastillo/The-Open-Book/tree/master/Open Boโฆ
-
KiCad PCB reposted
venenodcuba
@venenodcuba
Once again the best ๐ฅ@kicad_pcb, Cimarron project #iot #echoencuba. A&V Designs.
PD:Stay tuned!!! -
KiCad PCB reposted
Dave Berkeley ๐๐ท
@daveberkeleyuk
I'm still stuck on big, through plated designs I'm afraid. I don't think I'll ever get good enough to make surface mount boards. I'm really a software person. But I like to dabble in electronics. @kicad_PCB is great though.
-
KiCad PCB reposted
Piotr Zapart
@hexe_fx
Designed a small board using the NL7SZ58 configurable gate for moments that sooner or later will come ;)
Made with @kicad_pcb -
KiCad PCB reposted
Gideon Mugo
@GidionMugo
I've had the pleasure of designing this Bluetooth Display Board for a German based client, courtesy of @kicad_pcb . Features include: MDBT50Q-1MV2 BLE Module, NFC,USB-C, LiPo battery and 4.2 inch display.
Can't wait to have the board manufactured and tested. -
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
Finished initial layout on the AKL-AV1. Still a few small tweaks to do, but everything fit in the target footprint.
Definitely could get smaller but I'm pretty happy at how it looks now considering there's no blind/buried/filled vias etc. -
KiCad PCB reposted
Alex Lynd
@AlexLynd
I'm designing some new graphic art for the @WiFi_Nugget ๐โโฌ using a mix of #gimp and #inkscape!
@GIMP_Official makes it easy to draw pixel art, while @inkscape lets us easily generate @kicad_pcb circuit board art using extensions like svg2shenzhen.
#pcb -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Finish this simple design for a two in one SAE J1939 ECU Simulator and Gateway.
PCB design and 3D views in @kicad_pcb
Box work and cuts in #freecad
This design use ESP32 as a main uC for each side.
@FreeCADNews @HackerSpaceTech @EspressifSystem @esp32com @ESP32net
#kicad -
KiCad PCB reposted
Machdyne UG
@machdyne
Spending the weekend building more Riegel #fpga computers. Designed using open-source software @kicad_pcb and @openscad, it uses an open-source #riscv SOC that can be built with #opensource tools.
-
KiCad PCB reposted
Alperen
@AlperenAkkuncu
Placement is finished! I had to move a lot of components to allocate space for the new components (mostly DAC reconstruction filter)
It's dense!
Designed in @kicad_pcb
Subscribe to #plaindaq if you want to get notified when we go live: www.crowdsupply.com/kuncu-teknoloji/plaindaq
Alperen
@AlperenAkkuncu
Running out space ๐ #kicad #pcblayout
I don't think I have to enlarge the PCB to all of the components that I didn't placed. I just need to move a few blocks around. ๐ -
KiCad PCB reposted
IAMLIUBO
@its_hard_2_name
My last kicad project is here ๐github.com/imliubo/M5Pi
-
KiCad PCB reposted
IAMLIUBO
@its_hard_2_name
I haven't used #kicad for a long time, this is my latest project, but I've switched from #kicad-nightly to #kicad-stable, refuse take risks!๐
@kicad_pcb -
KiCad PCB reposted
Wayne Young
@Slartybartfast
LFO done! SVF/Noise and SAH to go ...
@kicad_pcb #modular #synthwave -
KiCad PCB reposted
Jayesh Sawant
@jeshtwt
It's finally complete! My first ever hardware design project is based on an STM32 MCU with an onboard IMU sensor, SD card interface, and USB interface. Designed in @kicad_pcb
-
KiCad PCB reposted
Remko
@pe1mew
It is still great fun to make a design in @kicad_pcb This one is for this summer at @CafeBulaCafe21 which @AislerHQ can expect this week to produce. @JOTAJOTI
-
KiCad PCB
@kicad_pcb
The KiCad project is proud to announce the fourth version 6 bug fix release.
www.kicad.org/blog/2022/04/KiCad-6.0.5-Release/
KiCad PCB
@kicad_pcb
The correct link is www.kicad.org/blog/2022/05/KiCad-6.0.5-Release/
-
KiCad PCB reposted
Lukas Wiese
@L_Wiese
This assembled PCB will arrive at my door very soon and I couldn't be more excited!๐ฅณ @JLCPCB was super quick with the manufacturing.
Next up: Soldering the bottom side and THT parts and hope for it to work..
@kicad_pcb @01RFC_Berlin -
KiCad PCB reposted
Reginaldo Prado
@eng_reginaldo
I use a plugin called "Rounder for Tracks" on Kicad.
-
KiCad PCB reposted
Laurent FRANCOISE
@_Laurent_Fr_
Et voici une alimentation 15v symรฉtrique + 5V avec plein de capas de filtrage (et des jolis modรจles 3D de TO220 avec un radiateur pris sur le lien de mon tweet prรฉcรฉdent)
Fait avec @kicad_pcb bien sรปr ! -
KiCad PCB reposted
venenodcuba
@venenodcuba
1/2-Any resemblance is pure coincidence, do you think it's true? Well no!!!, this only happens if you design with @kicad_pcb and manufacture @JLCPCB end of story. @__KOPEK__ now is your turn. @ErichGarciaCruz a tester is needed. Esto lo hago pa divertirme pa divertirme!!๐ฅ
-
KiCad PCB reposted
Robert Poser ๐ช๐บ
@Paperino_io
A couple of weeks ago I started using @kicad_pcb. This software is soo cool! Before I hesitated a bit since I feared learning might take longer again but getting started is really good and I like the clean user interface. #opensource #eda
-
KiCad PCB reposted
Adrian Studer
@AdiStuder
2-channel AIS receiver squeezed onto a FeatherWing. Includes quite a few changes to my old design, so I will be surprised if it works first try. ๐ฌ๐ค
-
KiCad PCB reposted
bastian, bl0x
@y__
Great! I also had some very satisfying experience combining @kicad_pcb and @FreeCADNews to develop the full system before ordering any of the parts. Everything fit on the first try.
-
KiCad PCB reposted
Hans Baier @hansfbaier@fosstodon.org
@hansfbaier
Quite amazing what @kicad_pcb and @FreeCADNews can accomplish together. I am happy I slept over my design, because I was able to fix a lot of wrinkles in the board design before fabbing it.
-
KiCad PCB reposted
Lukas Wiese
@L_Wiese
Super excited about finally placing the order for this 6ch servo motor driver I made in @kicad_pcb! It's supposed to drive the limbs of @01RFC_Berlin's new robots and will be made at @JLCPCB.
-
KiCad PCB reposted
astroelectronic@
@astroelectronic
AE01.07.50.100
astroelectronic.wordpress.com
IRM-03-05
@kicad_pcb
#meanwell
#pcb
#electronics
#acdc_converter -
KiCad PCB reposted
yerpa58
@yerpa58
Actual sounds, not actual colors. @FreeCADNews @kicad_pcb
-
KiCad PCB reposted
@joeycastillo@mastodon.social
@josecastillo
Looks like @kicad_pcb 6.0.4 fixes the raytracing glitch, so, a better render!
-
KiCad PCB reposted
Gideon Mugo
@GidionMugo
Here is a MIDI Controlled Solenoid Drum Machine Board design courtesy of @kicad_pcb .
A big thank you to the @kicad_pcb team for giving us such a superb and robust design software free of charge. -
KiCad PCB reposted
Final_Resolution
@FinalR333
(๏ฝก๏ฝฅโ๏ฝฅ)๏พ๏พ Hello everyone, long time no see!
I recently made a control board for "Two-pronged_Approach" (see previous post ๐), which makes controlling them easy. Just for fun, you know. Finally, I have to say that @kicad_pcb makes designing so easy! -
KiCad PCB reposted
Sam M
@samerps
Double the boards, double the power! The EPC9165 4kW Converter @EPC_Corp. Really enjoyed working on this with #hardops #kitops #decalmachine! @machin3io @mxeon1001 @chippwalters @hackaday #blender3d #render @kicad_pcb #electronics
-
KiCad PCB reposted
venenodcuba
@venenodcuba
Spoiler alert, Coin-Clock Beta 1, design in @kicad_pcb send to @JLCPCB ๐ฅ
-
KiCad PCB reposted
B
@Bren_EE
@kicad_pcb software now feels more at home. I've finally finished my Altium color palette in KiCad 6. Testing on the @Olimex A64-OLinuXino board.
#kicad #altium #opensource -
KiCad PCB reposted
Rodrigo M.
@rr_mbm
Data logging altimeter and pyro trigger SMD edition, 25x70mm board size. The cap on the underside is supposed to sit horizontally on the rectangle marked for it, I just was lazy to model a custom horizontal cap... LOL
Made with @kicad_pcb -
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
Final version of the PRBS generator board as ordered. Should have it in hand around the end of the month.
-
KiCad PCB
@kicad_pcb
The KiCad project is proud to announce the second version 6 bug fix release.
www.kicad.org/blog/2022/03/KiCad-6.0.4-Release/ -
KiCad PCB reposted
Chris
@cazaugg
I do like those pretty #pcb assembly drawings made with @kicad_pcb ๐
-
KiCad PCB
@kicad_pcb
KiCad has been accepted for Google Summer of Code 2022!
We're participating through the OpenCAx umbrella organization together with five other CAD projects. For the project ideas and information on how to apply, see opencax.github.io -
KiCad PCB reposted
Energy Cloud Technology
@energycloudtech
Biggest shipment from @JLCPCB in size ! Designed in @kicad_pcb Also there was 5 Sample PCBs for $2 !
-
KiCad PCB reposted
Nicolรฒ Carandini ๐ฎ๐น๐บ๐ฆ
@TPCWare
I've updated my project to KiCad 6 # @Raspberry_Pi @kicad_pcb @ghalfacree
github.com/ncarandini/KiCad-RP-Pico -
KiCad PCB reposted
venenodcuba
@venenodcuba
Full development in @kicad_pcb 6, based on @ST_World 20 hybrid analog inputs user select 0-10V & 4-20mA, RS485 CNX + ALRM
-
KiCad PCB reposted
Gideon Mugo
@GidionMugo
I did this design courtesy of @kicad_pcb a few weeks ago. It has ESP32, NEO-6M GPS, MicroSD slot among other functions. @PCBWayOfficial handled the manufacturing and the quality of the pcbs is really good. Upon testing, all works well. My client is happy, and so I'm I.
-
KiCad PCB reposted
chris dl1com
@dl1com
Rpi SVXLINK Interface Board, inspired by S57NAN's board (lea.hamradio.si/~s57nan/ham_radio/svx_intf_rpi/svx_intf_rโฆ). Minus PCM chip (using external USB soundcard), plus connectors for I2C temperature sensor and fan tacho, plus ADS1115 ADC for RSSI measurement. Designed with @kicad_pcb #hamradio #svxlink #repeater
-
KiCad PCB reposted
Gideon Mugo
@GidionMugo
Just finished doing this awesome design using @kicad_pcb. It has ESP32-D0WD-V3, Camera and Microphone. Pcb manufacturing will be done by @PCBWayOfficial. Kindly visit this link to check out my portfolio.
fiverr.com/share/0eN7Er
Or via email: gideon.mugo07@gmail.com -
KiCad PCB reposted
Alperen
@AlperenAkkuncu
I designed a base board, also in @kicad_pcb for the SMD module, which would make it easier if you just want to play with Pellicanus :)
-
KiCad PCB reposted
James
@baldengineer
TIL @kicad_pcb 6 has built-in and user-definable variables.
Now I won't be able to blame my intern when PCBs come back without revision numbers...
Shared between schematic and PCB, too. -
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
Here's the (hopefully) final layout.
Added a bunch of probe points for SI verification on various nets, some ground clips for low speed probing, and other miscellaneous cleanup. -
KiCad PCB reposted
CIRCUITSTATE
@circuitstate
Getting Started with @kicad_pcb Version 6 : Beginnerโs Tutorial to Schematic and PCB Design
#kicad #pcb #schematic #pcbdesign #eda
circuitstate.com/learnki6 -
KiCad PCB reposted
Alperen
@AlperenAkkuncu
PlainDAQ is designed in @kicad_pcb
It will be fully open-source, I will release the KiCAD project in the future before the campaign starts. -
KiCad PCB reposted
Jeff
@mcbridejc
PCBWay delivered today! @lynaghk nerd sniped me into moving magnets around on PCBs a while back, so I made this little race track demo. It's basically an unrolled stepper motor; driven just the same. Very satisfying.
-
KiCad PCB reposted
Pepper @pepper@hachyderm.io
@peppertronics
Finding/making the 3D models is work, but it's so worth it.
-
KiCad PCB
@kicad_pcb
The KiCad project is proud to announce the second version 6 bug fix release.
www.kicad.org/blog/2022/02/KiCad-6.0.2-Release/ -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
A 12-year-old @kicad_pcb feature request has been fixed today ๐ฎ
gitlab.com/kicad/code/kicad/-/issues/1956 -
KiCad PCB reposted
wireengineer
@wireengineer
Silkscreen is cleaned up and DRC is clear.
-
KiCad PCB
@kicad_pcb
Check out the most recent features merged into the development branch of KiCad. Version 7 development is off to a good start.
www.kicad.org/blog/2022/02/Development-Highlight-Februaryโฆ -
KiCad PCB reposted
Solder Party
@solderparty
Feeling like sprucing up your Solder (paste) Party?
Perhaps, you need a quick @kicad_pcb footprint reference?
Or maybe you just want to measure something.
You can do all that and more with our PCB Holders / Rulers, now available from @lectronz !
lectronz.com/products/pcb-holder-ruler -
KiCad PCB reposted
AnalogLamb
@AnalogLamb
Happy Chinese Lunar Year ! Thanks @kicad_pcb Finished two PCB Layout with #kicad6, I like it! @arduino @risc_v @Raspberry_Pi @ArmEmbedded @cnxsoft
-
KiCad PCB reposted
figurativelythedevil
@FigTheDevil
Some renders/screencaps of my latest project! A breakout board for the PIC16LF1518-I/SO for testing code & component tweaks. Shout out to @kicad_pcb and @FreeCADNews for some great #foss
#electronics #kicad #freecad #microchip #picmicro -
KiCad PCB reposted
Mike Julander
@Sodium_Hydrogen
@kicad_pcb v6 introduced some new features and I've just released a new version of svg2mod to take advantage of these changes and make it more versatile.
#badgelife
A change log can be found here: github.com/svg2mod/svg2mod/releases/latest -
KiCad PCB reposted
Michael Rangen
@RangenMichael
This idea made us laugh so we got some made. Itโs jam packed with toasty goodness, even the pads are made of toast! The #prototoastpcb is available @tindie made with @kicad_pcb
-
KiCad PCB reposted
Alex...mostly inactive or read only
@tinyledmatrix
New project soldered. I mixed a @arduino Uno Mini (designed with Altium) and a @adafruit Metro M0 Express (Eagle) with the help of @kicad_pcb. In which you can import both. This new miniMetroM0 should be fully compatible to the bigger Metro M0. PCBs were made by @oshpark
-
KiCad PCB reposted
John Newall
@john_newall
#pinout 0.0.20 has been released. Document your pinout in @kicad_pcb and export a neat diagram. Updated docs at pinout.readthedocs.io walks through the process with demo code to make things easy. #pinout #python #electronics #svg #diagram
-
KiCad PCB
@kicad_pcb
Things you are missing out for in v6 -- fear not we are already at least 1/12th to v7... hopefully.
www.kicad.org/blog/2022/02/Development-Highlight-Februaryโฆ -
KiCad PCB reposted
Frank
@PcbMadness92
@kicad_pcb I just sent away for my first board made using kicad 6 it's just a simple esp8266 board but I'm loving the new features in kicad 6 keep it up kicad it's crazy how advanced kicad is getting I'm excited for future releases to see where this goes
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Had to be done ๐
-
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
Been a while but I'm still working on this board. Added a via fence around the perimeter (top side only for now, have to do bottom still) and stitching vias between the ground planes on a 5mm grid in all available space.
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Days since I teased y'all with @kicad_pcb nightly again: 0
Yes, other software might already have this feature, but KiCad didn't, and now it does ๐ -
KiCad PCB reposted
Kade Turner
@KadeTurnz
The latest @kicad_pcb 6.99 nightly release now has support for @3Dconnexion SpaceMouse devices in both 3D Viewer and PCB Editor!
-
KiCad PCB reposted
Radiona_org - Zagreb Makerspace
@RadionaOrg
#ulx4m-LD v001 with Ethernet connected @NLnetFDN @kicad_pcb #ecp5 @latticesemi @intergalaktikEU
-
KiCad PCB reposted
Mike Norgate
@mike_norgate
Got my #ender3 hooked up with a @Raspberry_Pi running #klipper and wanted a tidy way to power the PI from the printer PSU. Couldn't find anything nice so cracked out @kicad_pcb and got designing
-
KiCad PCB reposted
Martin Hubรกฤek
@hubmartin
Dneska opฤt malรฝ posun. Pรกr PMODลฏ a pro ethernet tam dรกm konektor na tuhle speciรกlku LAN8720 od @laska_kit ;)
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
.@kicad_pcb v6.99 now supports multi-selection cross-probe ๐ฅฐ
You block-select components in the schematic and they all get selected in the PCB too!
This will be super helpful when first importing parts into the PCB. -
KiCad PCB reposted
Legacy Devices
@LegacyDevices_
Hi guys, I've released #din41612 10 slot 3U backplane gerber files for free download. Designed in @kicad_pcb
for @RBattlestations @vcfederation @vintage_center and #homebrewcomputer . Happy home brewing :)
martenelectric.cz/backplane_pcb_din41612_10_slot.html -
KiCad PCB reposted
Jonathan Newman
@__jonnew
After 10+ years of using EAGLE, I made the switch to @kicad_pcb. I've now made two fairly complex boards with KiCad and I'm hooked. Thank you @kicad_pcb team for this insanely good piece of open source software. Shove routing is worth the price of admission alone.
-
KiCad PCB reposted
Mark Robson
@markxr
Yes I made a little tutorial for Kicad 6 here: docs.google.com/document/d/1y4TFBEMj5g-BDzbomL7GkO_-t-56zโฆ
It's a bit clunky but I expect it will do what you want. -
KiCad PCB
@kicad_pcb
The KiCad project is proud to announce the first version 6 bug fix release.
The 6.0.1 stable version contains critical bug fixes and other minor improvements since the previous release. The release announcement can be found at www.kicad.org/blog/2022/01/KiCad-6.0.1-Release/ -
KiCad PCB reposted
AISLER
@AislerHQ
Say hello๐๐ฅณ @kicad_pcb
-
KiCad PCB
@kicad_pcb
You can now order your boards directly from KiCad. A percentage of each order helps to support development of the KiCad project. And you get high quality AISLER boards. Thanks @AislerHQ.
-
KiCad PCB reposted
Jeremy Cook ๐ค
@JeremySCook
New PCB on order:
-
KiCad PCB reposted
VoltLog
@VoltLog
Checkout my impressions on using the new @kicad_pcb V6 youtu.be/NlUhXlaiFZw
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
What do we have here #nightlylife @kicad_pcb
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
THIS. CHANGES. EVERYTHING.
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Finally, @kicad_pcb allows us to create schematics the way they were always meant to be created.
-
KiCad PCB reposted
Oludotun Ebiekuraju
@dotunebiekuraju
Made this charge controller with KiCad 6.0, it was a breeze compared with older versions. Thumbs up for the @kicad_pcb team. You rock!
-
KiCad PCB reposted
Jason Lopez
@AtomSoft
Getting some designs remade for KiCad...
-
KiCad PCB reposted
Patrick Van Oosterwijck @xorbit@noc.social
@xorbit1
I couldn't help myself and made a prototype PCB for the 555 MPP solar charger I designed for the @hackadayio 555 contest in the new @kicad_pcb v6, details here: hackaday.io/project/183022-555-mpp-solar-charger
-
KiCad PCB reposted
CyberMonkey
@Mr_Cybernetic
Ready to be manufactured! @JLCPCB #pcbdesign @kicad_pcb
-
KiCad PCB reposted
VoltLog
@VoltLog
I might have exaggerated with the labels on this PCB. I'm happy to finally being able to use Kibuzzard label tool with @kicad_pcb V6
-
KiCad PCB reposted
AISLER
@AislerHQ
We just released the first testing version of our official @kicad_pcb plugin at github.com/AislerHQ/PushForKiCad If you feel risky today, give it a try ๐
Thanks to @GregDavill for his great build script -
KiCad PCB reposted
The Fallen
@pinski1_
What's even better is I noticed the 'Syntax help' button!
So awesome! -
KiCad PCB reposted
CyberMonkey
@Mr_Cybernetic
For my hobbies, I'm improving my skillset faster than my everyday job... #mechanical #electronics #alwayslearningnewskills @kicad_pcb @Onshape
-
KiCad PCB reposted
Piotr Zapart
@hexe_fx
Boards ordered. What's on:
- 18650 charger + protection
- Attiny806 MCU
- RGB led for status, leds for Arm, charging status, HV warning
- HV generator blocked when charging battery
- Buzzer for acoustic alarms
- Electronic power switch (hold for on/off) -
KiCad PCB reposted
Solder Party
@solderparty
We updated our RP2040 Stamp footprints to include extra silk screen to help you orient the Stamp properly.
You can find the footprints, symbols, and 3D models for the RP2040 Stamp for @kicad_pcb (5 and 6), @ADSKEAGLE, and @EasyEDA here:
github.com/solderparty/rp2040_stamp_footprints -
KiCad PCB reposted
DarkCyp
@DarkCyp
Profiter des #vacances pour sereinement se mettre ร @kicad_pcb en modifiant un clavier #sweep pour y ajouter le logo de la #pรฉpiniรจreNumรฉriqueINRAE.
-
KiCad PCB reposted
74th
@74th
KiCad6ใงไฝฟใใใซใฉใผใใผใไฝใฃใใ่ฒใฎใปใใ่ชไฝใฏVS CodeใงไฝฟใฃใฆใใใใฎใจๅใใใคใKiCadใฎPluginใจใใฆใคใณในใใผใซใงใใใ github.com/74th/kicad-highcontrast-monokai-theme #kicad
-
KiCad PCB reposted
ๆ้ง
@tsukigake829
KiCad 6 ใฎPCBใจใใฃใฟใผ ๏ผๅณ๏ผ
ไปฅๅใฎPCBใจใใฃใฟใผใ ๏ผๅทฆ๏ผ
ใ ใใถๅคใใฃใฆใใ -
KiCad PCB reposted
Marek Piechut
@marekpiechut
Received PCBs for my wireless #planck #keyboard prototype made with @kicad_pcb. Hope that other parts will arrive soon so I can test it out.
-
KiCad PCB reposted
acclimal
@acclimal
KiCad 6.0 on Chromebook
-
KiCad PCB reposted
Honza Mrรกzek
@yaqwsx_cz
KiKit v1.0 is out! Release notes: github.com/yaqwsx/KiKit/releases/tag/v1.0.0
TLDR:
- KiCAD 6 support
- new CLI
- GUI for PcbNew
- new tab building algorithm
- annotations
- panel features: text, chamfers, fillets, etc.
PS: If you like it, consider becoming my GH sponsor: github.com/sponsors/yaqwsx -
KiCad PCB reposted
Cyber City Circuits
@MakeAugusta
I have to say that PCBNew for sure seems to be smoother in KiCAD 6.
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
I noticed that KiCad's About dialog says it started in 1992, so it would be celebrating 20 years in 2022.
But the 1992 claim is hard to verify as there is very little info, digging a bit more it seems that the first release was closer to 2003, and before that, it was a long WIP. -
KiCad PCB reposted
Greg
@GregDavill
After dragging my feet, I've packaged up KiBuzzard.
It's now available directly through the KiCad Plugin/Content Manager! :D
arturo182 is on Bluesky now
@arturo182
๐
-
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
Here's a @kicad_pcb tip: if you select items by dragging left to right, only items completely within the box are selected. However, if you drag from right to left, everything that *touches* the box is selected.
-
KiCad PCB reposted
rmna
@projectrmna
Then I got KiCAD and figured out how to make a little chainable breakout board
-
KiCad PCB reposted
Greg
@GregDavill
TIL: KiCad has an option to completely hide all but the active layer. I'm in "dim" mode 80% of the time.
-
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
KiCAD 6 is so pretty.
-
KiCad PCB reposted
Jaceeshen
@jaceshen1
From imagination @kicad_pcb to reality @JLCPCB !
-
KiCad PCB reposted
CIRCUITSTATE
@circuitstate
Tutorial on generating assembly files for automated #pcb assembly from @kicad_pcb open source schematic and PCB designing software.
circuitstate.com/kicadtopcba
#kicad #pcba #pcbdesign #pcbassembly #circuitstate -
KiCad PCB reposted
venenodcuba
@venenodcuba
Small sister but powerfull girl,๐ฅNew controll board Eng.Leader @AndyAbreuReyes1 #pcb Desing by Me๐คฃin @kicad_pcb @KiProEDA fab @JLCPCB, @EspoletaT @mundo_xl En el siguiente el 1ro es pa nojotros๐คฃ #pcbuild #pcbart
-
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
New board going out to fab shortly. VNA / TDR characterization platform for measuring micro thru axial lead resistors.
Are the new-gen LeCroy probe tip resistors actually Vishay HML01s? Let's see if I can tell them apart in an A/B test. -
KiCad PCB reposted
remco stoutjesdijk
@itsonlyaudio
The new @kicad_pcb v6.0 is great, and they didn't even tell you about the experimental "build_board" easter egg!
-
KiCad PCB
@kicad_pcb
The KiCad project is proud to announce the release of version 6. Thank you to all the developers who made this possible.
www.kicad.org/blog/2021/12/KiCad-6.0.0-Release/ -
KiCad PCB reposted
Stargirl ๐
@theavalkyrie
The surface-mount kit assembly guides for @wntrblm will have this super neat interactive placement guide. It's based on the excellent InteractiveHtmlBom @kicad_pcb plugin.
-
KiCad PCB
@kicad_pcb
So KiCad version 6.0.0 should now be readily available for most of you out there now. Release notes:
www.kicad.org/blog/2021/12/KiCad-6.0.0-Release/ ๐๐ฅณ -
KiCad PCB reposted
Emil Fresk
@korken89
Time to give the @InsightSiP ISP3010 a go as a UWB tag. Made it so the PCB supports a 3.7V Li-Ion together with charger via micro USB or a coin-cell CR2032 with the needed capacitors for supporting the pulsed currents. All designed in @kicad_pcb of-course :)
-
KiCad PCB reposted
Piotr Zapart
@hexe_fx
Got an idea for use of the CH330/340N soic8 USB-UART chips: an UPDI programmer with automatic switching between UPDI mode and a normal UART. Plan is to automate the programming using @PlatformIO_Org pre/post actions. Design, as usually with @kicad_pcb
-
KiCad PCB reposted
Adam @ Vector 3D ๐ฌ๐ง
@Adam_V3D
Spent the last couple of days learning @kicad_pcb and I've not felt this excited in ages. I've wanted to be able to do this for years and now I finally can! By no means an expert, still lots to learn, but the basics are now in place. (Design is Phil's Lab on YT)
-
KiCad PCB reposted
scottbez1
@scottbez1
Designed in @adskFusion360 & @kicad_pcb, based on @lilygo9 T-Micro32 Plus (ESP32), programmed with @arduino & @PlatformIO_Org, features parts from @adafruit (silicone wires & micro USB breakout), PCBs & SLA printing from @JLCPCB.
Amazing what's possible for hobbyists these days! -
KiCad PCB reposted
Sebastian Staacks
@diconx
WiFi Game Boy Cartridge
there.oughta.be/a/wifi-game-boy-cartridge
Full documentation of how my open source Game Boy cartridge with WiFi works.
#nintendo #gameboy #opensource, #openhardware #esp8266 #arduino @kicad_pcb -
KiCad PCB reposted
Weston Braun
@WestonBraun
Getting ready to send out the test board the buck converter I designed on the SKY130 PDK. I should have my IC back by early January and i'm already having nightmares about it not working ๐
-
KiCad PCB reposted
Fabien Benetou
@utopiah
Samoklava or "keyboard that assembles itself", a 5x3 split keyboard with 3 thumbs as declarative design
github.com/soundmonster/samoklava via @KbdNews
Translates Ergogen YAML to a @kiCAD_PCB (automatically route the traces on the PCB) and plate files for FR-4 fab or laser cutting. -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
Sent to @JLCPCB factory ... 100 pcs ordered... 1st batch... there will be giveaways to some retweets....
-
KiCad PCB
@kicad_pcb
We're a quarter of the way to our goal for 2021. Can you help? donate.kicad.org
Your donation will help KiCad support a yearly development cycle. And Features! Version 7 features that we are working on include Teardrops, Pin Swaps, Padstacks and Atomic Parts Libraries. -
KiCad PCB reposted
Stephen Murphy
@stephendpmurphy
The @glassboard Glasslink ARM M-Core debug probe is released! We moved from closed source and using Altium to a fully open source design made in @kicad_pcb ๐ Read more about it here:
github.com/glassboard-dev/gl-glasslink-hardware -
KiCad PCB reposted
venenodcuba
@venenodcuba
@kicad_pcb looks great, Thank's @JLCPCB
-
KiCad PCB reposted
venenodcuba
@venenodcuba
HomeServer for #iot
x.com/venenodcuba/status/1427441660896624644.
From idea and design @kicad_pcb to manufacturing @JLCPCB and assembly, stay tuned 4 start up๐ฅ!!! @EspoletaT vite vite ๐ป๐ป
venenodcuba
@venenodcuba
#madeincuba #echoencuba #iot #homeserver
Ethernet (1GB), FSK / LoRa gateway, RS485 BUS, WiFi 2.4 / 5GHz, Bluetooh, HDMI-4K, Reloj integrado, alertas LCD, MQTT, etc., etc. It's simple, all in one place -
KiCad PCB reposted
Honza Mrรกzek
@yaqwsx_cz
You might want to checkout PcbDraw that does exactly this, but automatically: github.com/yaqwsx/PcbDraw/
-
KiCad PCB reposted
Honza Mrรกzek
@yaqwsx_cz
All compatibility issues should be resolved. Now it needs proper testing. More about how to test: github.com/yaqwsx/KiKit/pull/238
-
KiCad PCB reposted
Piotr Zapart
@hexe_fx
@kicad_pcb -> @FreeCADNews -> Real thing. Will powder coat the box once electronics is tested and working. ESP32 Pico3.02 based DSP guitar pedal.
-
KiCad PCB reposted
Fabrizio
@IObrizio
#kicad render vs reality
#thearmorer
@kicad_pcb #pcb #led #smd #mandalorian #badgelife #pic10f322 #svg2shenzenโจ @MicrochipMakes @manticore_ @JLCPCB -
KiCad PCB reposted
DevKitty
@DevKitty_io
@AlexLynd is working on designing a new #wifinugget in @kicad_pcb that uses only surface mount components, making it even slimmer and easier to produce! ๐
Stay posted for new features and software we're implementing, coming soon to the WiFi Nugget ๐ผ
#opensource -
KiCad PCB reposted
Neil Armstrong @superna9999@social.linux.pizza
@Superna9999
All my babies ! Thx @kicad_pcb & @JLCPCB ! Source is on github.com/superna9999/tinyci
-
KiCad PCB reposted
venenodcuba
@venenodcuba
Ahora de blanco๐ฅ๐ฅ๐ฅ Control industrial BMB-Reload, 15 DIN, 15 DOUT, 6 AIN totalmente aisladas + doble funciรณn 4-20mA / 0-10V. Leds estado+indicadores ModBus, HMI OUT, 4 PWM OUT, 4 STP OUT. Desing @kicad_pcb. @JLCPCB @EspoletaT @mundo_xl Stay tuned!!!
-
KiCad PCB reposted
Craig Bishop
@craig_jbishop
All placed now, time to route.
-
KiCad PCB reposted
Martin Chromy
@MaChr_
Release of @Raspberry_Pi #zero 2 W nudged me into two things; order one and make new version of my "daughter board" in @kicad_pcb in an attempt to make my own #pocketpc. Now let's hope that it's not only render that's better since the last time ๐ (new version on the left)
-
KiCad PCB
@kicad_pcb
The KiCad 2021 year end funding drive has begun.
www.kicad.org/blog/2021/12/KiCads-2021-End-of-Year-Fund-Dโฆ -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
:)
-
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
Magnetic connector modelization to prepare a @kicad_pcb footprint for our #s3lamandra watch . The connector will be on the watch's edge. It will be used to charge and as USB plug D+/D- . We are preparing a @crowdsupply campaign
-
KiCad PCB reposted
Chris
@cazaugg
Playing around with SVGs in @kicad_pcb to make pretty circuit boards. #badgelife #pcb
-
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
@kicad_pcb New footprint + 3D file modelizing for this new cool 170x320 panoramic IPS display. Will fit well with and ESP32S3 from @EspressifSystem
-
KiCad PCB reposted
Craig Bishop
@craig_jbishop
Using KiCad with PySpice and Jupyter-Lab is not a bad way to design some more synth circuits :)
-
KiCad PCB reposted
Arktist
@Arktist
Wow! For Freeware, @kicad_pcb is pretty damned powerful! And relative intuitive to use (more or less.) Schematic to LR layout to UR PCB design. My first design enroute to CNC etching of the first of many boards I need. Next FlatCAM.
-
KiCad PCB reposted
Alex...mostly inactive or read only
@tinyledmatrix
Nice....Not as easy as thought...had to download newer (latest) nightly/RC and fix the outline to get a proper 3D view. And I somehow lost the crystals. Now doing some mini shield
-
KiCad PCB reposted
otoone_dev
@OtooneDev
ใพใ ้จๅใฏๆใฃใฆใชใใฎใงไปฎ้ ็ฝฎใงใใใใชใใ่ฏใๆใใซใชใฃใฆใใพใใใใใฑใณใณ็ญไฝใซๅ ฅใใชใใฃใใ 3Dใใชใณใฟใผใงไฝใใใ
(KiCad ใงในใซใผใใผใซใใใชใใใฟใผใณใ้ใกใใญใซๆๅฎใงใใชใใใ ใใใโฆ)
#pc1245 #ใใฑใณใณ #m5stamp -
KiCad PCB reposted
-
KiCad PCB reposted
Tech Explorations
@txplore
The third edition of KiCad Like a Pro is now available. It's the most effective way to learn how to design amazing PCBs using KiCad 6. Save 20% off the standard price with our Black Friday offer:
techexplorations.com -
KiCad PCB reposted
Honza Mrรกzek
@yaqwsx_cz
Do you use KiCAD for your commercial products? Join me in supporting KiCAD's developers! It is worth it!
#percentsforkicad
Why did I support @kicad_pcb? A thread: -
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
Gearing up to start layout on a new board!
This is a multi-purpose design that will let me validate several things for MAXWELL as well as supporting a couple of research projects for work.
The big BGA is a Kintex-7 in FBG484 and is... very heavily utilized. -
KiCad PCB reposted
LibreSpaceFoundation
@LibreSpace_Fnd
From the development of @UPSat_gr, the first #opensource #cubesat, to our latest #qubik series of #pocketqubes, we utilise open-source tools like @kicad_pcb. You can check out the cornucopia of projects made with it, including our own: www.kicad.org/made-with-kicad/categories/Space/
-
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
I've been working on KiCad V6 for over 4 years (yes, since before V5 came out). Today we tagged RC1, and the 6.0 release is on track for next month. It's a great feeling :)
-
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
Single layer ESP32 S2 pcb for quick CNC pcb creations avoiding europe to china to europe ping pong.
-
KiCad PCB reposted
astroelectronic@
@astroelectronic
AE01.12.09.010
astroelectronic.wordpress.com
MAX713
@kicad_pcb
@maximintegrated
#electronics
#pcb
#pmic
#powerelectronics
#batterycharger
#nicd
#nimh -
KiCad PCB reposted
Max Holliday
@maholli404
visual diff your PCB schematics & layout with github.com/leoheck/kdiff.
Gosh, aren't open source just tools the best? Thanks @kicad_pcb community! -
KiCad PCB
@kicad_pcb
The KiCad project has released version 5.1.12. For more information, see the release announcement on the KiCad website at www.kicad.org/blog/2021/11/KiCad-5.1.12-Release/
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
The new Plugin and Content Manager is now enabled by default in @kicad_pcb nightly builds. Makes it really easy to manage Plugins, Libraries, and Color Themes by packaging them in repositories. Can't wait to see what the community will do with this!
-
KiCad PCB reposted
MangoNoFlake
@mangonoflake
We are planning mass production, and open source the HW project๐ฅญ
#kicad #linux #riscv -
KiCad PCB reposted
Piotr Zapart
@hexe_fx
Assembled the pcb, pots are not soldered in yet. Will do it after installing the pcb into the enclosure to avoid any stresses due to drilling tolerances. Also added small stripes of open GND around the edges for easy scoping. @kicad_pcb @PaulStoffregen
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Checkout out this plugin by @bouni2016 that adds @JLCPCB/@ElectronicsLcsc integration to @kicad_pcb!
It allows querying the JLC parts database and assigning LCSC part numbers, and it generates BOM + CPL + Gerber files for JLCPCB!
github.com/Bouni/kicad-jlcpcb-tools -
KiCad PCB reposted
alex โ glow
@glowascii
Quick reminder that you can get your own โจspookyโจ #esp8266 programmer board / earring! See my @Hacksterio tutorial at ๐ www.hackster.io/glowascii/ouija-style-esp8266-programmer-โฆ ๐ and order @oshpark's After Dark colorway.
Use this to program your own ESP board with @arduino code!โก
// #arduino #pcb #ouija -
KiCad PCB reposted
Piotr Zapart
@hexe_fx
Almost done: Teensy4.1 Audio DSP platform in form of a guitar pedal, stereo IO, USB host/device, MIDI, Expression pedal input, 14 pots, small display + encoder. PCB designed in @kicad_pcb, mech design in @FreeCADNews @PaulStoffregen
-
KiCad PCB reposted
CHROMICO
@atech5122
@kicad_pcb on Windows 11 isn't that bad :)
-
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Other use for my ESP32 multipurpose front pannel board, this tiny board have 4xIN, 4xOC Outputs, RS485, RTC,I2C display, and 10 leds.
Now I'm using to generate GPRMC sentence to test a NMEA Parser.
Designed in @kicad_pcb
4lyr @JLCPCB
@esp32com
@EspressifSystem
@HackerSpaceTech -
KiCad PCB reposted
Nebra
@NebraLtd
Our latest @oshwassociation @ohsummit certified @LoRaAlliance @SemtechCorp LoRa Concentrator (SX1302 / SX1303 based) is working great in our tests. You can grab the files here... (designed in @kicad_pcb ) github.com/NebraLtd/LoRa-mPCIe/tree/v1.1/hardware
-
KiCad PCB reposted
Piotr Zapart
@hexe_fx
Added silkscreen and two daughter boards for TTP223 touch sensors.
While named a "vacuum pickup", this board can be a generic controller for small pump/valve systems. Will post it on github once tested. -
KiCad PCB reposted
Frank Buss
@frank_buss
A simple 20 x 20 cm board I designed and just ordered at jlcpcb. I think I did a half-decent component placing and pin-swaps, but then I was lazy and just let the TopoR router do the routing. It is for a cable tester, maybe I will release it as open source hardware later.
-
KiCad PCB reposted
astroelectronic@
@astroelectronic
AE01.12.42.100
astroelectronic.wordpress.com
LTC4060
@kicad_pcb
@LinearTech
@arduino
#electronics
#pcb
#pmic
#powerelectronics
#batterycharger
#nicd
#nimh -
KiCad PCB reposted
Graham Sutherland (Polynomial^DSS) โก๏ธ chaos.social
@gsuberland
Want previews of KiCad footprints (*.kicad_mod) when browsing libraries on GitHub? I wrote a userscript to automatically render them in a canvas.
github.com/gsuberland/github_kicad_footprint_preview_tampโฆ -
KiCad PCB reposted
venenodcuba
@venenodcuba
Now ready to small version one more time thanks @kicad_pcb and go for fabrication to @JLCPCB, this two ๐ช๐ช๐ช๐ฅ.
-
KiCad PCB reposted
Mingshu
@oldrev
Working on an very small(only 25x25mm) all-in-one aquarium LED controller module, canโt wait for the samples to arrive. @kicad_pcb
-
KiCad PCB reposted
Pavel Milanes CO7WT
@co7wt
Design of the hardware is done, using @kicad_pcb of curse, tomorrow will do the toner transfer, etching, drilling and start to place components and testing.
Web dev will wait, as web interface is secondary, It has all the nuts & bolts to be able to control the rotor already -
KiCad PCB reposted
ChihauccisoIlConte?
@Chihauccilconte
My Project has been choosen for the FAME Award. The project it's 100% made with #opensource software (@kicad_pcb @FreeCADNews @inkscape) and (apparently) it rocked! - click here to vote - strawpoll.com/xosrgjzfr (if you like) #freecad #kicad #inkscape #design #fameaward
-
KiCad PCB reposted
Jeremy Cook ๐ค
@JeremySCook
Designed in @kicad_pcb and soldered together with the help of a 3D-printed jig:
-
KiCad PCB reposted
RICK
@RICK0X00
Literalmente um projetinho que faz o controle de um carrinho, com direito ao modo turbo... passรญvel de implementaรงรฃo de um controle remoto. Todo feito no @kicad_pcb mas infelizmente nรฃo foi executado como deveria por questรฃo de tempo.
github.com/silvajhb/MCCB -
KiCad PCB reposted
Alex Lynd
@AlexLynd
Working on a case design through @FreeCADNews for the Nugget PCB's I created w/ @kicad_pcb, I haven't quite figured out how to integrate the PCB module with the stepup workbench yet tho, but the raw STEP file works fine for now :)
#3dprinting -
KiCad PCB reposted
Abhijeet
@yskabhijeet
Finally, เคงเคกเคผเค v1 is complete!, works good for my finger, needs a better algorithm for led intensity and amplification levels for different finger types, working on v2! also learning Latex for En/เคนเคฟเคจเฅเคฆเฅ documentation, will share files after v2. @kicad_pcb @FreeCADNews
-
KiCad PCB reposted
concretedog @concretedog@mastodon.social
@concreted0g
Just installing @kicad_pcb on one of the machines at #ffiws #makerspace ahead of a small workshop this evening. Ace that it also recommends installing @FreeCADNews :) #opensource #family
-
KiCad PCB reposted
Hypercube Semiconductors
@HelloHypercube
Working with @FreeCADNews and @kicad_pcb at same time generating 3D components and PCB.
PCB outline generated by Python script๐
The Python script push KiCAD envelope one step further and created 'castlellated' pads without $50/edge special 'castlellated' processing. ๐๐ -
KiCad PCB reposted
BG2BHC
@bg2bhc
A recent project of @BY2HIT @LittleQ_Huang , uSDX HF transceiver in a form of standard Arduino shields. Amazing all the UI and signal processing of an SDR transceiver can be done with an ATMega328 microcontroller. github.com/BY2HIT/usdx-arduino
-
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
New connector test board is almost done!
Pared down to 3 connectors, redid the EM sims of each launch to be more accurate, and tweaked ground cutout and pin geometry slightly. Added the Beatty line. -
KiCad PCB reposted
Benjamin Vernoux
@bvernoux
Dual 5ยตH LISN(Line Impedance Stabilization Network) for EMC pre-testing project based on Jay_Diddy_B & Noy from EEVBLOG forum www.eevblog.com/forum/projects/5uh-lisn-for-spectrum-analโฆ (fully open source MIT license) for @kicad_pcb v6
For more details see
github.com/bvernoux/5uH_LISN -
KiCad PCB reposted
Jeremy Cook ๐ค
@JeremySCook
Roughly what it will look like when done: @PCBWayOfficial
-
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
@AllwinnerTech @AllwinnerInfo @kicad_pcb component footprint creation + 3D file creation . Preparing an opensource linux device ....
-
KiCad PCB reposted
Alex Lynd
@AlexLynd
I forgot I owned a twitter account for a sec, but after learning @kicad_pcb in like 2 days and the SVG2Shenzhen extension with @inkscape, I designed these geometric cat badges @KodyKinzie and I are using to teach WiFi hacking / microcontroller classes.
-
KiCad PCB
@kicad_pcb
KiCad proudly announces first platinum sponsor AISLER.
www.kicad.org/blog/2021/08/Aisler-Becomes-First-Platinum-โฆ
aisler.net/blog/aisler-is-now-the-first-kicad-platinum-spโฆ -
KiCad PCB reposted
edwin
@e_mwiti
Built with the awesome @kicad_pcb. Off to manufacture
-
KiCad PCB reposted
โกdcelectr โ
@dcelectr
@kicad_pcb footprint and schematic symbol for the @M5Stack STAMP-PICO to make custom carrier boards:
gist.github.com/dcelectr/fa603e63f9aa0e06760f68fa7b63b726/ -
KiCad PCB reposted
โ๐โร R.I.P.
@r0_hw
And finally, used @kicad_pcb cool feature (Kicad 5.99) to have "hatched" copper fills, and gave my 3d Gamepad a little bit of a grip - or at least texture !
-
KiCad PCB
@kicad_pcb
The KiCad Project would like to welcome our newest Silver Level sponsor PCBgogo. The PCBgogo announcement can be found here www.pcbgogo.com/current-events/PCBgogo___A_Strong_Supportโฆ
-
KiCad PCB
@kicad_pcb
The KiCad project would like to thank all of our donors and sponsors. Support from our donors and sponsors is critical to our continued success and we are grateful to you for it.
-
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
Pythong scripting under @kicad_pcb to build a 200 LED Watch
-
KiCad PCB reposted
Benjamin Vernoux
@bvernoux
I have published all data (PCB/Schematic using @kicad_pcb, simulation with Qucs v0.0.19 & @SaturnPCBDesign using PCB Toolkit v8.06, measurements done with HP8753D) related to open source TRL Microstrip board tests using @oshpark 6 layers
github.com/bvernoux/kicad_rf/tree/master/6Layers_trl-boarโฆ -
KiCad PCB reposted
Dede Hendriono
@dedehendriono
3D Animation PCB made with @kicad_pcb ๐
-
KiCad PCB reposted
venenodcuba
@venenodcuba
Front panel ready to, thank's @kicad_pcb
-
KiCad PCB reposted
Jorge :P (akirasan)
@akirasan
Well...the PCB #streamdeack is already routed and ready to be sent to be maked to @PCBWayOfficial @kicad_pcb #opensource
-
KiCad PCB reposted
Dede Hendriono
@dedehendriono
EMS-DEX2 Simulator made with
@kicad_pcb on @MX_Linux -
KiCad PCB reposted
Dede Hendriono
@dedehendriono
EMS-DEX2 which has been made with @kicad_pcb
-
KiCad PCB reposted
Honza Mrรกzek
@yaqwsx_cz
Panelization for @kicad_pcb made easy via KiKit. I have a first working draft of the GUI & Action plugin for KiKit's panelization module
Testers welcomed: github.com/yaqwsx/KiKit/pull/208 -
KiCad PCB reposted
Christian Simon
@ChSimon__
Intรฉgration de l'รฉlectronique au boรฎtier โ
@FreeCADNews๐@Kicad_pcb
Ca commence ร se voir que c'est pour mettre dans un @M5Stack ?
#projetmystere -
KiCad PCB reposted
Jeremy Gordon
@JeremySF
New project with Tall Boi. Prototyping a two key USB-C keyboard for @osugame. @MicrochipMakes SAMD21 based. Helped him on the schematic and he routed it in @kicad_pcb, milled on @cirqoid, and is hand applying solder paste. Stuffing, reflowing, and coding the firmware tonight. ๐
-
KiCad PCB reposted
concretedog @concretedog@mastodon.social
@concreted0g
Another morning in @kicad_pcb tinkering.
-
KiCad PCB reposted
Xasin (@xaseiresh@fosstodon.org)
@XasinTheSystem
Slowly but surely this little piece is coming together.
Designing the board outline in @FreeCADNews and putting things together in @kicad_pcb is quite a pleasure!
Now to fit the remaining LEDs, a few extra 3D models, and we're good to go on this Mobile Holo-Emitter! -
KiCad PCB reposted
alex โ glow
@glowascii
Happy little footprints.
-
KiCad PCB reposted
Jorge :P (akirasan)
@akirasan
El diseรฑo del futuro #streamdeck con #seeeduino #xiao sigue su lento desarrollo๐ ๐ ๐
Aรบn tengo que decidir si van a ser leds RGB WS2812 en este formato (render) o los pequeรฑos 2020, que son muchos mas pequeรฑos y tal vez quedan mejor debajo del mecanismo. @kicad_pcb #opensource -
KiCad PCB reposted
Mingshu
@oldrev
ๅๆฏไธไธช ESP32-C3 ๅ็ 5่ทฏ LED PWM ๆงๅถๅจ๏ผ็ปๆฟ @kicad_pcb
-
KiCad PCB reposted
Jeremy Cook ๐ค
@JeremySCook
After a bit more work on @kicad_pcb the encoder/macro 3D model looks so much better! Really impressed with this feature's capabilities
-
KiCad PCB reposted
Energy Cloud Technology
@energycloudtech
#iot Board ready to go for fabrication. Designed with @kicad_pcb and parts ordered with @digikey !
#pcb #embedded -
KiCad PCB reposted
yerpa58
@yerpa58
New MIDI sequencer for eurorack in final design phase, made with @FreeCADNews and @kicad_pcb
-
KiCad PCB reposted
abdullah kahraman
@cebrax
Just finished my first embedded linux board with iMX6ULL, 512MB DDR3L RAM, LCD, 2xUSB and Ethernet.. Thank you @jaydcarlson for your great motivation, you broke all barriers for the entrance!
Designed with @kicad_pcb -
KiCad PCB reposted
venenodcuba
@venenodcuba
Achieving perfect product thanks to @kicad_pcb, Are we going to manufacture it? Yes of course. Stay tuned. #madeincuba #echoencuba
-
KiCad PCB reposted
Scarecrow
@scarecrowEng
I've improved my AM radio schematic and have ordered the board at JLCPCB. I've tried using KiCAD and making PCB for the first time.
-
KiCad PCB reposted
ใทใฃใใๅปๅกต
@hygiene_jp
A KiCad 3D library for "bursting electrolytic capacitor" made by a user in Japan. #kicad
g200kg
@g200kg
kicad็จ3Dใฉใคใใฉใชใใ็ซใๅดใ้ป่งฃใณใณใใณใตใใๅฎๆใใพใใ
-
KiCad PCB reposted
Raphael Stรคbler
@nenharma82
Itโs amazing what you can do using open source tools like @kicad_pcb
-
KiCad PCB reposted
venenodcuba
@venenodcuba
90% ready, @JLCPCB ready to go, I ๐ฅฐ @kicad_pcb, #madeincuba, @PcbArts
-
KiCad PCB reposted
venenodcuba
@venenodcuba
Del invento a mรกs pa allรก, servidor para domรณtica miBlackSVR, @kicad_pcb.
รltimos toques para la fabricaciรณn @JLCPCB, CM4 @Raspberry_Pi + RS485, FSK, WiFi, eth 1Gb, dinRail 150mm, @TechMigue @EspoletaT @TheCubanTech #hechoencuba #madeincuba -
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
You can now convert shapes containing arcs to polygons/zones in @kicad_pcb. Should be handy for designing complex silkscreen, mask, and copper shapes in another tool and then importing. This feature was enabled thanks to work from @Qbort and @SethHillbrand.
-
KiCad PCB reposted
Gliderbits
@gliderbits
New project in development... It's just enjoying the sunset ๐
Can you guess what it is?
#pcbdesign and #3drender using @kicad_pcb -
KiCad PCB reposted
Chris Lafky
@fluxotronlabs
Sneak peak of my recent collabo with @ContextualElec and @luxonis -- leveraging depthAIs CV hardware as a baseboard for the NRF52 ABC board, a promising embedded application!
-
KiCad PCB reposted
Mingshu
@oldrev
@kicad_pcb ็ป็ๅบไบ ESP32C3 ็่ถ ็บง็ดงๅ็ฎๅๅผๅ ณๆงๅถๅจ
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Had some fun with Rev 2 :)
-
KiCad PCB reposted
VA3SMU
@VA3SMU
the @kicad_pcb "deep dive" on @lhspodcast is really good. It's broad without being intimidating. Aimed at people with a bit of electronics background, but you don't need to be an EE.
Not as easy as Fritzing, but decent.
lhspodcast.info/2020/02/lhs-episode-328-kicad-deep-dive-2/ -
KiCad PCB reposted
Sander
@sander_dh
Pcb layout
-
KiCad PCB reposted
Abhijeet
@yskabhijeet
Here is เคงเคกเคผเค/Dhadak - A pulse Oximeter.
Made mistakes in v1, but all well now can see a neat PPG waveform!
Lots of learning in #freecad for enclosure design and @kicad_pcb. Will provide a further update later with the complete build and source links. -
KiCad PCB reposted
andy.snee
@sneenyc
Recently, I've been too burned out with work to make PCBs in my free time, but I finally got around to this one. Can anyone guess what it does? (the TO-247 is a clue)
love the @kicad_pcb raytraced rendering ๐คฉ
#pcbdesign #kicad #electricalengineering -
KiCad PCB reposted
Justin Merrell
@merrellio
With open source @kicad_pcb and low volume PCB service by @JLCPCB the barrier to entry is basically time at this point.
-
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Finalizada la Dev Board WFI32E.
Una version de bajo costo compatible con breadboard de la PIC32 WFI32E Curiosity Board de @MicrochipTech
Una oportunidad de bajo costo de probar el PIC32MZ1025W104
Diseรฑo @kicad_pcb
@MicrochipMakes
@HackerSpaceTech @Hacksterio
@kitspaceorg @make -
KiCad PCB reposted
embOS Technologies
@embostech
Gas Detection System Interface Unit
@kicad_pcb -
KiCad PCB reposted
Sayanee
@sayanee_
I wasted a lot of time trying to complete all the routes for my current PCB. Then I found the saying "PCB design is 90% placement and 10% routing" ๐ฑ
Well, better late than never! In this video, I share 10 steps to route a PCB layout.
๐ฅ๐ youtu.be/W4rroROmcuU -
KiCad PCB reposted
Benjamin Vernoux
@bvernoux
@kicad_pcb footprint for SMA Edge connector (up to 40GHz) to "rule them all"
Southwest Microwave 1092-02A-5
Amphenol RF 901_10510-2 & 901-10511-3
Compatible with Belfuse 142-0771-831 and Mueller Electric Co BU-1420761881 ... -
KiCad PCB reposted
Thanh Duong
@thanhduongvs
STM32MP15xxAA SOM, designed with @kicad_pcb @NgocPhuTruong2
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
InteractiveHtmlBom, the famous @kicad_pcb plugin for creating interactive BOMs was just updated with column hiding and reordering ๐
Remember to update! github.com/openscopeproject/InteractiveHtmlBom -
KiCad PCB reposted
Sam
@sam210723
A quick Pico to Pmod adaptor made in @kicad_pcb will tidy this up a bit.
The 3.3V rail on the Pico can supply ~300mA which is sufficient for any SFP I've come across. -
KiCad PCB reposted
IGOSAT
@IGOSAT_Diderot
Nouvelle carte de test FlatSat destinรฉ ร tester le modรจle EQM d'IGOSAT. Elle sera montรฉe sur un cadre en profilรฉ dโaluminium 20x20. @kicad_pcb @IPSA @APC_Laboratory @UnivEarthS @Univ_Paris @CNES
-
KiCad PCB reposted
Honza Mrรกzek
@yaqwsx_cz
Small teaser from an upcoming project. And it is not about the board (it is just an old board for reference).
It will be a new tool for @kicad_pcb! -
KiCad PCB reposted
FabRIC
@FabRIC2021
Ja tenim preparada la versiรณ de la placa "BLYNK shield per ARDUINO UNO" per enviar a produir.
Prรจviament havรญem fet algunes plaques amb la CNC de PCBs. Per aixรฒ รฉs necessari alguns canvis en el disseny amb @kicad_pcb.
@Puntmultimedia @blynk_app @ESP8266 @arduino -
KiCad PCB reposted
Erkan CiL
@ErkanCIL_
STM32F103 bluePiLL Development Board, designed with kicad... Open Source HardWare...
download link: drive.google.com/drive/folders/1oYiqIfNbW4809EeG0BtBaaxyRโฆ
#oshw #cortexm3 @kicad_pcb -
KiCad PCB reposted
JMN Electronics
@JMNElectronica
Empezando a probar una placa compatible con Arduino versiรณn MakerAlc, hecha con @kicad_pcb.
Hola, mundo! -
KiCad PCB reposted
Jorge :P (akirasan)
@akirasan
The new version of PCB MULTIUSOS for the "ugly duckling" of #espressif, #esp8266-01 at 99%...I'm going to put something fun on the silkscreen ๐ค๐ค๐ค and go!!! @PCBWayOfficial
@kicad_pcb #oshw
- More pins full setup. 8 pins
- USB type C, instead of MiniUSB
- 3 fixing holes -
KiCad PCB reposted
Gustavo Reynaga
@gsreynaga
Ya casi, maรฑana le pego sus tres/cuatro checadas y al Fab: @elmundoverdees @kicad_pcb @pdp7 @Antonio_Raptors @ForeverWero @pp_ruiz @IObrizio @Sabasacustico @nataT_T @dannimakes
-
KiCad PCB reposted
MagicDAQ
@DaqMagic
@kicad_pcb Really loving the 3D rendering capabilities of KiCad! KiCad has been instrumental in bringing our 'user centric' PCB testing products to life.
www.magicdaq.com -
KiCad PCB reposted
Nebra
@NebraLtd
Coming soon as @oshwassociation @ohsummit certified open source hardware and designed in @kicad_pcb - our FlashStick for the @Raspberry_Pi compute module 4. Works with @balena_io Etcher and Raspberry Pi imaging tool to quickly flash your CM4s! ๐๐
-
KiCad PCB
@kicad_pcb
KiCad 5.1.10 stable version has been released www.kicad.org/blog/2021/05/KiCad-5.1.10-Release/. Download the latest version from www.kicad.org/download/.
-
KiCad PCB reposted
-
KiCad PCB reposted
Frank Loesche | @fra_loe@fediscience.org
@fra_loe
I saved the best for last: We share the component designs at reiserlab.github.io/Component-Designs/ and developed the parts with @FreeCADNews, @kicad_pcb, @inkscape (open formats, software freely available on major platforms).
-
KiCad PCB reposted
Bastien Scl
@BastienScl
New battery management board in progress by @OXILEC1 made with @kicad_pcb and @FreeCADNews.
#madeinfrance #electronic #kicad #industrie #engineering #freecad -
KiCad PCB reposted
Wayne Young
@Slartybartfast
Voltage Controlled Filter done! A Moog-inspired classic ladder filter.
@kicad_pcb -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Begin assemble of new lot of single phase Voltage Protections with the high quality PCBs from @JLCPCB design in @kicad_pcb
The micro is a K42 family PIC from @MicrochipTech @MicrochipMakes -
KiCad PCB reposted
Jorn
@HuangZhanghong
ๅผๅงไฝฟ็จ @kicad_pcb 5.99 ๆๅ ฅ็ไบง็ฏๅข๏ผไธบ็ฑ่ฑ่ฎพ่ฎก็ ไธ็ธ็ตๆบ/ๆญฅ่ฟ็ตๆบ้ฉฑๅจๆฟ๏ผไฝฟ็จSTM32 ็HRTIM่ฟ่กๆฐๅญ่ฐๅถๆงๅถ๏ผ่ฝฏไปถๅนณๅฐไธบRust Embedded , ๅ ็ฝฎ่็BLEๆฐๆฎๅ่ฝๅ2.4Gๆ ็บฟ้ฅๆงใ
-
KiCad PCB reposted
Wayne Young
@Slartybartfast
Got the VC-ADSR and VCA modules finished today using @kicad_pcb Just the VCF to go and I'll have most of the elements of a synthesiser (VCO already done). Just need a MIDI-to-CV and/or sequencer. Might buy those though.
Oh, and LOTS of pots, knobs and 1/4" sockets ..... -
KiCad PCB reposted
Rene Schickbauer @cavac@social.cavac.at
@TheCavac
First mechanical stacking test of the #radioduino prototyping boards.
Alignment looks very good. @AislerHQ did a fantastic job manufacturing the boards, as usual. -
KiCad PCB reposted
roguediode
@thorstenjaeger
>>quadropus<< the little bugger is @oshwassociation certified. Built with @kicad_pcb & a little baseplate with @FreeCADNews also part of the Repo.
It also is my Tindie premiere :) www.tindie.com/products/digitalforge/quadropus/ -
KiCad PCB reposted
Carlos Eduardo (@carlosedp@fosstodon.org)
@carlosedp
Also, what about having the pinout and a QRCode for the project files in the bottom? Too much clutter?
BTW, I loved the 3d view on @kicad_pcb. -
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
Updated SMA test board with four different launch configurations.
Pretty happy with the top 3, still tuning the bottom. -
KiCad PCB reposted
SYZYGY
@SYZYGYfpga
We've posted a new GitHub repository with PCB templates here: github.com/SYZYGYfpga/pcb-templates (also linked from here: syzygyfpga.io/specification/). @kicad_pcb templates for now. @altium to be added soon.
-
KiCad PCB reposted
GNU/Linux Open Hardware PowerPC notebook
@powerpcnotebook
PCB Complete sources published! Mentor Expedition, Altium and Kicad formats
@kicad_pcb @fustini
www.powerpc-notebook.org/2021/04/pcb-complete-sources-pubโฆ -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Here's the idea, just a sketch, not routed.
A @Raspberry_Pi RP2040 Stamp, so you can easily make a board without having to solder any of those small SMD parts! Just add 5V in. The stamp is 25x25mm (~1x1 in)
Would anyone be interested? -
KiCad PCB reposted
Jose Vega
@josevega
coming soon we will have a new controller to circle close [WIP] #opensource @mixxxdj
@kicad_pcb @FreeCADNews #arduino -
KiCad PCB reposted
๐๐๐
ป๐
ต๐๐๐
พ๐
ธ๐
ณ
@sulfuroid
Week end to build my ESP32 GRBL CNC pcboard with 3 axis. @ESP32net @kicad_pcb #cnc @morpheans
-
KiCad PCB reposted
mnkytypwrtr
@mnkytypwrtr
My own @Trezor wallet running their open source firmware (Trezor One). Upgraded to USB-C and a smaller OLED. Designed in @kicad_pcb
-
KiCad PCB reposted
-
KiCad PCB reposted
Sleepy Pony (Now on Lectronz!)
@SleepyPonyLabs
My notebook covers assembled on @LIHITLAB Notebooks. Designed in @kicad_pcb and mfged by @JLCPCB
-
KiCad PCB reposted
Laurent FRANCOISE
@_Laurent_Fr_
J'ai commandรฉ les PCBs pour faire le bus pour le PDP11 ! Comme toujours rรฉalisรฉ avec @kicad_pcb, l'idรฉe est de pouvoir mettre 2 cartes cรดte ร cรดte pour les cartes "double largeur" (comme sur la photo)
-
KiCad PCB reposted
Sleepy Pony (Now on Lectronz!)
@SleepyPonyLabs
What if ATtiny85 has 512 IO pins? 4 layers 100x100mm. Designed with @kicad_pcb and mfged by @JLCPCB as well.
-
KiCad PCB reposted
Muriuki
@muriukidavid
@McuOnEclipse My TinyK20 @kicad_pcb board is ready for prototype now, I tried to add all 3D models. 5v to 3v3 and microSD card at the bottom
-
KiCad PCB reposted
ใใจใใใปใใใ๏ผใฏใใใใฎใใ
@YonosukeHayashi
KiCadๆฌ่ชญใใงไฝใฃใใๅใใฆใฎใใชใณใๅบๆฟใใๅฑใใพใใ๏ผใกใฟใซใงๆใใ็ตตใฎ็ทใ็ถบ้บใซๅบใฆใใฆๅคงๆบ่ถณใงใใใใฃ๏ผใใกใใใใmicroSDใฎใใฌใผใฏใขใฆใๅบๆฟใฎใคใใใงใใผ
-
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Ensamblando el primer lote de Controladores de Temperatura para el Ventilador del Radiador para Hot Rods
Este lote no tiene display y puede ser ajustado usando la Interfaz Telnet Serie.
Usa PiC de @MicrochipTech @MicrochipMakes
Diseรฑo @kicad_pcb
PCBs @JLCPCB
@HackerSpaceTech -
KiCad PCB reposted
Adam Haile - @DreadMakerAdam@fosstodon.org
@DreadMakerAdam
Feels good to get back to some @kicad_pcb work and knock out a quick design I've wanted for awhile. A generic stepper motor/driver test platform that uses @adafruit #feather boards. Many thanks to @erikcederb and @ppaukstelis for the great design feedback.
-
KiCad PCB reposted
Nebra
@NebraLtd
Our open source LoRa mPCIe gateway based on @SemtechCorp SX1302/3 chipset and designed in @kicad_pcb is here. We also just submitted to @oshwassociation @ohsummit for certification! Compatible with @thethingsntwrk @helium @LORIOTio and more... github.com/NebraLtd/LoRa-mPCIe
-
KiCad PCB reposted
RWB
@RWB93174525
Bought this new hat and figured I would attempt to finally use the @kicad_pcb patch I bought from @adafruit like 4 years ago ๐
Came out just fine as long as it stays on in the summer ๐ -
KiCad PCB reposted
Lard Rocket
@lardrocket1
Quilter The Filter is a resonant 4-pole low pass filter for my #reagansrevenge synth done in @kicad_pcb . This is a test run. I'm super pumped about using transconductance amplifiers (LM13700) to control the filter cutoff frequency.
-
KiCad PCB reposted
Jithin Saji Isaac ๐ฎ๐ณ
@jithinisaac
@MicrochipTech WLR089U0 SAMR34 based LoRaWAN development board. Great work by Microchip with the documentation & firmware examples for the module, works great.@kicad_pcb design done along with @9bits_Atulkumar. Special thanks to @azerimaker & @anupamvarghese for all the insights
-
KiCad PCB reposted
xDNA Electronics & Design
@xDNAElectronics
For the Configuration of the Elevator Controls that I am Developing Alone, I have updated my Game // Cat Learning card to the SAMD21 Microcontroller, all this done using @kicad_pcb, It is still in Beta version, but the PCBNew rendering is phenomenal!
-
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
I'm finish the prototipe of a small, Low Cost & High Insulation #industrial #plc Have 4x120/240V AC IN, 4x5A OUT, K type temp measure #rs485 for #modbus, use PIC18F25K42. PGM adapter use @ESP8266 @arduino WiFiTelnetToSerial example.
@ESP8266COM @MicrochipMakes @kicad_pcb -
KiCad PCB reposted
venenodcuba
@venenodcuba
Saying goodbye to the month with this project, automatic Kwh Meter module web GUI, all the details of its functions, codes and schemes, please visit www.sysadminsdecuba.com
Designed @kicad_pcb, MFR @JLCPCB, broker @mqttorg, parts @MouserElec @digikey @MicrochipMakes -
KiCad PCB reposted
Adrian McEwen @amcewen@mastodon.me.uk
@amcewen
Got the high-current capability reworked & improved for the @MCQN_Ltd My Baby's Got LED board. New design all worked up in @kicad_pcb and a batch ordered from @JLCPCB, so there should be fresh boards ready to buy mid-March. Waitlist at www.tindie.com/products/mcqn_ltd/my-babys-got-led/ #weeknotes #ibal223
-
KiCad PCB reposted
FANTM
@getFANTM
We just sent out our first rev of in-house hardware for review and fabrication. Loved using open source @kicad_pcb to put it together!
-
KiCad PCB reposted
Roman Samusevich
@KekCheburec
Cool silk-screening comes with KiBuzzard. Thanks to @GregDavill @arturo182 and @VedantParanjape for porting the plugin for #kicad 5.1
-
KiCad PCB reposted
tnishinaga
@tnishinaga
Happy new year #kicad on arm mac!!
-
KiCad PCB reposted
รlvaro Prieto
@alvaroprieto
Inspired by @sophywong's #31daysoffusion360 (and @GregDavill's KiCad advent calendar of making!). I'm going to try the same but with @FreeCADNews :D
We'll see if I can actually stick to it... Today's model is a LoRa module that's in one of my projects. #31daysoffreecad -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
This is a Low Cost High Insulation #industrial #plc 4xIN 4xOut K type temp mesure, #modbus over #rs485 #mqtt over #wifi Real time Clock, Display and Keyboard
Use @esp32com @ESP32net ESP32-WROOM-32E programmed in @arduino design in @kicad_pcb
send to @JLCPCB
@HackerSpaceTech -
KiCad PCB reposted
-
KiCad PCB reposted
Yashiro
@yashiro_ld
Gradient coil design in MATLAB with reference to the paper
I calculated. I made it by converting it to a PCB pattern with KICAD based on the calculation result. -
KiCad PCB reposted
Fabrizio
@IObrizio
#kicad render vs reality
#themandalorian
@kicad_pcb #pcb #led #smd #badgelife #pic10f322 #svg2shenzenโจ @MicrochipMakes @manticore_ -
KiCad PCB reposted
DevilishDesign - @devilishdesign.bsky.social
@Devilish_Design
A bit of KiCAD and SimCity on a Sunday afternoon while waiting for Opentalk with @Mac84tv and @hypertalking ๐
Mac84 ๐ (Steve)
@Mac84tv
Tomorrow! Join me and James (@hypertalking) LIVE (again) for another OpenTalk episode at 1:30 PM ET / 6:30 PM UTC. Weโll be trying out some old gadgets and geeking out about vintage Macs. Hope to see you there! ๐คyoutu.be/fL9oB3q89Pw
-
KiCad PCB reposted
pyroesp
@pyroesp
Hey @Elektor, I finally got around to finishing the Game Boy Oscilloscope GBDSO from your November 2000 article.
Want to help me make it fully open source @Elektor? You just have to release the ROM.
Schematic and PCB all done with @kicad_pcb.
github.com/pyroesp/GBDSO -
KiCad PCB reposted
Dave Rowntree
@sobuildit
I need a new watch, so I'm making a #custom one in @kicad_pcb. This is the usual 8x8 word clock using 2020 APA102 #led, gesture sensor. Rear has USB-C charge port, LiPo and power stuff. This is going to be real small when I'm done. Layout is just for initial dev version.
-
KiCad PCB reposted
PenguinTutor
@penguintutor
My latest PCB designs have arrived from @JLCPCB
Designed using @kicad_pcb includes a demo for my YouTube channel, a design for a model railway and an Arduino shield.
Next stage is to get soldering and see if my designs work.
#electronics #pcb #kicad -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Ya esta ensamblada la Proteccion de Voltaje de Alta Corriente 2x120V 1x240V AC con Relay de 120Amperes por Fase. Usa Microcontrolador de la Familia PIC18F K42 de @MicrochipTech @MicrochipMakes
Diseรฑado en @kicad_pcb
PCB fabricado en @JLCPCB
@HackerSpaceTech -
KiCad PCB reposted
Nicklas Frahm
@nicklasfrahm
I learn a lot in the past two weeks, it was a lot of fun to design this with @kicad_pcb. Exchanged some components and sent the board off to production. I am impressed that after only an hour @JLCPCB already changed the status from "In review" to "In production".
Nicklas Frahm
@nicklasfrahm
I am excited! Revision 1 of my first PCB is ready for production with @JLCPCB. The hardware is 100% open-source of course! Thank you @Clapfire for showing me all I need to know about KiCAD. Can anyone guess what it is?
-
KiCad PCB reposted
Pi Supply
@PiSupply
The @ThePiJuice mPCIe HAT is coming soon complete with data connection over UART or USB, PiJuice HAT stackability and more cool features for your @Raspberry_Pi projects. The best bit though? It's open source hardware designed in @kicad_pcb and soon @ohsummit certified ๐๐๐ฅณ
-
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
He terminado el #plc #industrial de Bajo Costo y Alto Aislamiento con 4xIN/OUT medicion de temp con sensor tipo K protocolos #modbus y #mqtt con RTCC, Pantalla y Teclado
Usa @EspressifSystem ESP32 programado en @arduino diseรฑo en @kicad_pcb
@esp32com @ESP32net @HackerSpaceTech -
KiCad PCB reposted
Core Electronics
@CoreElecAU
The #kipad is finished! All the common layout commands for @kicad_pcb are accessible. There's even media controls and an undo key - for really big mistakes. Latest #thefactory episode here: coreelec.io/7v
#kicad #customkeyboard #timesaving #efficiency #customenclosure -
KiCad PCB reposted
Nicolรฒ Carandini ๐ฎ๐น๐บ๐ฆ
@TPCWare
I've built a 3D model of @Raspberry_Pi Pico with @SketchUp to add a 3D visual footprint of it to @kicad_pcb
Feel free to use it, you can download the files and read the instructions on my GitHub project.
github.com/ncarandini/KiCad-RP-Pico -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
It's finish the High Current 240Amp ON/OFF or PID Temperature Controller, use PIC18F25K42 form @MicrochipTech Max31855 from @maximintegrated for temperature measure, and H-Bridge for Drive two 120A Latching Relay.
Desing in @kicad_pcb
PCB from @JLCPCB
@MicrochipMakes -
KiCad PCB reposted
Kitspace
@kitspaceorg
A RPi4 compatible HAT for astronomy equipment by Pierros Papadeas at @LibreSpace_Fnd
kitspace.org/boards/gitlab.com/pierros/astrohat/ -
KiCad PCB reposted
Upside Down Labs
@myupsidedownlab
BioAmp v1.5 for listening/recording biopotential signals and learning neuroscience, available on our @tindie store www.tindie.com/products/upsidedownlabs/bioamp-v15-kit/
Huge thanks to @pdp7 of @oshpark for providing sponsorship for the perfect purple PCBs for our design.
Ingredient for render KiCAD, Blender -
KiCad PCB reposted
Luke Gorrie
@lukego
I โค๏ธ the Glasglow revC2 layout.
- Distinct regions with a defined function.
- Clear bounding boxes.
- Symmetry between and within regions.
- Aesthetic top-level alignment.
- Small flourishes like the diagonal resistor.
Someone needs to take a bow for this :-) -
KiCad PCB reposted
Maykol Rey
@ReyMaykol
Ya lista la primera mitad.... Por detector.. #kicad @kicad_pcb @JLCPCB
-
KiCad PCB reposted
Markus Hesse
@Markus_Hesse
Inspired by the excellent embedded linux article from @jaydcarlson I am finishing the design of my first 4 layer PCB with @kicad_pcb containing a RK3308 - Wonder how many bugs Rev0 will have...
-
KiCad PCB reposted
Rodrigo Tufiรฑo
@RodryTufio
CCS-Hub v1.0: Un prototipo modular con @arduino #mega, un #esp8266, tres fuentes externas, relรฉs y borneras. CCS-Hub v2.0: Mi primer diseรฑo en @kicad_pcb, una sola placa electrรณnica con @ST_World #stm32, una fuente y RJ-45. Ahora solo falta que lleguen de @PCBWayOfficial ๐
-
KiCad PCB reposted
Upside Down Labs
@myupsidedownlab
MSP430 Breadstick ๐ฅ
Ingredients for image:
1. KiCAD
2. Blender
3. GIMP
4. Inkscape
#opensource #development #hardware #electronics -
KiCad PCB reposted
@platinenmacher@kurzschluss.group
@platinenmacher
Want to use @JLCPCB assembly service with @kicad_pcb? Try this script which generates a LOT of parts for your Schematic: github.com/DasBasti/lcsc2kicad
Also please test it ;) -
KiCad PCB reposted
Sam Littlewood
@samlittlewood
Got a holiday project to a good point: ECP5 version of SD2SNES. Gateware built using open source tools from @YosysHQ. PCB with @kicad_pcb & @jlcpcb. Learnt a lot using great original design from @orzvektor (ikari_01). Currently using a 45K LUT part - ~20% utilisation.
-
KiCad PCB reposted
Maykol Rey
@ReyMaykol
Charla sobre mรญ expericia profesional en el diseรฑo de #pcbs con @kicad_pcb @OpenHardwareLA
t.me/openhardwarelatinoamerica -
KiCad PCB reposted
Maciej Nowak
@maciejt_nowak
Heron - devboard opary o mikrokontroler RISC-V GD32VF1, 4xPMOD, 2xCAN, USB OTG, 16MB flash SPI. Magistrala pamiฤci wyprowadzona do poลฤ czenia z @RadionaOrg ULX3S
Akutalny stan prac: zlutowane, nie dymi, miga, uruchamianie rzeczy
Projekt: @kicad_pcb
Wykonanie PCB: @JLCPCB -
KiCad PCB reposted
Adrian Studer
@AdiStuder
My twitter-less collaborator fmilburn posted a detailed write-up of this project on Element14 www.element14.com/community/community/project14/sensors/bโฆ
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Just a slightly cursed board...
-
KiCad PCB reposted
FreeCAD (CAD+CAM+CAE)
@FreeCADNews
Did you know that @RealThunder12 also has a project called fcad_pcb. It's yet another way to improve #ecad/#mcad collaboration between #freecad and @kicad_pcb
github.com/realthunder/fcad_pcb -
KiCad PCB reposted
selftronics
@selftronics
Designed with @kicad_pcb, produced by @JLCPCB and delivered by @Fedex.
Now, ready to be baked after a small trip around the globe.
CHN->JP->USA->FR->TR -
KiCad PCB reposted
Kyle Stubbins
@KyleStubbins
Finished another #pcb with @kicad_pcb tonight.
Just uploaded it to @oshpark.
Does anyone else get that feeling of anxiety once uploaded? Did I forget something? Did I mess something up? Should I check it again?
*Hits save & rechecks the schematic*
#kicad #electronics #maker -
KiCad PCB reposted
GianluigiPerrella
@glperrella
Grande successo al corso Kicad 5 di Officine Robotiche! Un grazie particolare ai partecipanti.
Visto il grande successo, a breve un'altra sessione del corso nelle prossime settimane.
Stay Tuned... @OfficineRobotic @kicad_pcb
.๐ Vedi tutti i corsi: www.officinerobotiche.it/corsi
. -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Diseรฑo terminado del convertidor de Serie a Telnet con compatibilidad para instalar el Battery Shield de Wemos. Para poder visualizar los datos de las Protecciones de Voltaje de AC. Diseรฑo en: @kicad_pcb y enviada a: @JLCPCB
-
KiCad PCB reposted
Goran_Mahovlic
@GMahovlic
#firefly V1.2
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Spent some time on @GregDavill's KiBuzzard @kicad_pcb plugin (based on @NorthAllenPoole's work).
Added a GUI (also kept the cmdline interface). The config saves all values, interface choice, and the window's position. Should work on Windows and Linux ๐
github.com/arturo182/KiBuzzard -
KiCad PCB reposted
TOULOUSE COMPOSANTS ELECTRONIQUES
@ToulouseCompos1
Merci @kicad_pcb et @arduino
-
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
Next round of the AKL-AD1 differential probe amplifier.
This version is based on the TI LMH6401, which provides up to 26 dB of differential-to-differential gain, or 20 dB of differential-to-single-ended gain (exactly matching a 10x probe tip).
Should be good to ~4 GHz. -
KiCad PCB reposted
Thomas Flummer
@thomasflummer
My first attempt at bringing a bit of @risc_v to the @sparkfun #micromod ecosystem. This uses a #gigadevice GD32VF103 microprocessor with 32k RAM, 128k Flash, and a USB bootloader in ROM
-
KiCad PCB
@kicad_pcb
Thank you. kicad.org/blog/2021/01/2020-Year-End-Funding-Drive-Results/
-
KiCad PCB reposted
Rabid Inventor @rabid_inventor@fosstodon.org
@rabid_inventor
Well, that is cool just found out you can take any shape and turn it into a pad in @kicad_pcb with the one-click :D used datasheet images as the template.
-
KiCad PCB reposted
Workshopshed
@Workshopshed
I know ๐
-
KiCad PCB reposted
Cosimo Menza
@cosimo128bit
First version of my 8 pin development board for #microchip #microcontrollers, made with #kicad and equipped with an infrared #sensor for remote control. Thanks to #pcbway for the excellent printed circuit board. @MicrochipTech @kicad_pcb @PCBWayOfficial ๐
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
๐ฅ๐ฅ๐ฅ
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Fine, I'll do it myself ;)
-
KiCad PCB reposted
Akira Takeda
@akira0309
ใใญใทใผ็ฎกใฝใฑใใๅบๆฟใฎKiCadใใผใฟใใชใใจใใงใใใใใใใๅคๅฝขใซใผใฟใผใซใใใจVใซใใใฃใฆใใฃใฆใใใใฎใไธๅฎ้ใใใ่ฃฝ้ ใฏใฉใใซ็บๆณจใใใใใชใFusionPCBใจElecrowใใ้ ผใใ ไบใชใใใฉๆ่ฟใฏใฉใใใใใใ ใ๏ผ
-
KiCad PCB reposted
ๆๅฑฑใใใโจ๏ธ่ชไฝใญใผใใผใV
@keyboard_yukari
ใใฃใกใฎๅบๆฟใใงใใ๏ฝ๏ผ
ใคใ๏ผ
ใ#่ชไฝใญใผใใผใ #kicadใ้่ซใใคใคๅบๆฟ่จญ่จใใ #3ใ#ๆๅฑฑ็ธใ youtu.be/8I6nezIRcsY @YouTubeใใ -
KiCad PCB reposted
Jisso News
@JissoNews
1ๆ23ๆฅ(ๅ)10:00-17:00ใซCQๅบ็็คพ๏ผ@CQ_connect๏ผใใปใใใKiCadใฆใผใถๅฟ ่ด๏ผไปใใ่ใใชใ๏ผๅฐๆใๅคงๆใ่ฃๆใฎ่กโโๅคๆณจ็จใใผใฟใฎไฝใๆนใ3D่จญ่จใ่ถ ไพฟๅฉใชไฝฟใๆนโฆใใ้ๅฌใใชใณใฉใคใณๅๆ้ๅฌใๆฑไบฌ้ฝๆไบฌๅบใปCQๅบ็็คพใซใฆใ่ฉณ็ดฐใฏ seminar.cqpub.co.jp/ccm/ES20-0126 ใๅ็ งใ
#seminar #pcb #kicad -
KiCad PCB reposted
maker.io
@MakerIO
How to Route Differential Pairs in KiCad (for USB) with @ShawnHymel dky.bz/3pZKm86 #icymi #tbt
-
KiCad PCB reposted
Roman Samusevich
@KekCheburec
-
KiCad PCB reposted
Femto โก
@femtoduino
Okay, wow, the @kicad_pcb nightly builds are amazing!
-
KiCad PCB reposted
-
KiCad PCB reposted
Honghong Lu
@lu_honghong
Try to learn #kicad by re-drawing it on kicad which @cibomahto already designed the board on Altium Designer.
-
KiCad PCB reposted
Energy Cloud Technology
@energycloudtech
@kicad_pcb in Panel ready to go to fab house ! #pcbdesign #kicad #energycloud
-
KiCad PCB reposted
epekta
@epektasound
current project: making a replacement pcb in KiCAD for my 60% mechanical keyboards since i zapped one of them by accident, gonna be adding a bunch of features that will be ultra-tailored to what i like since most other 60% pcbs seem to only have these features separately
-
KiCad PCB reposted
Greg
@GregDavill
So @arturo182 started me on this project.
Initial attempt at including the silkscreen generator: github.com/sparkfunX/Buzzard in KiCad.
I think it's actually working quite nicely. -
KiCad PCB reposted
Wayne Young
@Slartybartfast
Just putting my @kicad_pcb salesperson hat on for a moment ... it has a really cool 3D render option that lets you see what your board is going to look like before you build it!!
-
KiCad PCB reposted
Remko
@pe1mew
#done soldering 2 PoE power supply pcbs manufactured by @AislerHQ for @helium Hotspots designed with @kicad_pcb only one schottky missing ....
-
KiCad PCB reposted
Henning Paul
@hennichodernich
Create PCB in @kicad_pcb, export as Hyperlynx, convert to CSX using hyp2mat, edit resulting .m file to unsmooth edges and add vias using for loop, visualize with AppCSXCAD.
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
If you're using @kicad_pcb #nightlylife with @JLCPCB and you noticed weird issues with pads with rounded corners (see photo), the solution for that is to _check_ "Disable aperture macros" in the Plot dialog. See thread for details: forum.kicad.info/t/apologies-from-atommann-an-engineer-frโฆ
-
KiCad PCB reposted
Femto โก
@femtoduino
BOMU (KiCAD) design progress - Made a few corrections, and adjustments.
Currently in review at @PCBWayOfficial ๐โจ
๐ต Let's get this OSHW Design fab'd and tested! ko-fi.com/femtoduino -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Sweet, you can now name copper zones in @kicad_pcb !
-
KiCad PCB reposted
Chris ๐ฆฃ @signalskew@leds.social
@SignalSkew
You can do this in @FreeCADNews as well. The KicadStepUp workbench workflow really works nicely (e.g. it handles all of this layer/sketch shuffling back and forth for you).
wiki.freecadweb.org/KicadStepUp_Workbench -
KiCad PCB reposted
Mahesh Venkitachalam
@mkvenkit
Making progress with d2x. After some thought decided to go with a lipo battery. (This is an nRF52840 + IMU board for collecting data for ML models.)
-
KiCad PCB reposted
Pablo๐ง
@pabloridolfi
#summerproject! ESP32 dev. board with JTAG+UART ๐
Working with @kicad_pcb nightly. I love it.๐ -
KiCad PCB reposted
Henning Paul
@hennichodernich
Ordered at @aisler! I'm looking forward to my first 4-layer board.
-
KiCad PCB reposted
Chris Ellis - @intrbiz@bergamot.social
@intrbiz
Yeh it's definitely worth looking at. It seems very capable and produces a cool 3d render of your board too.
-
KiCad PCB reposted
JMN Electronics
@JMNElectronica
Primer pedido de PCB de bajo coste de @JLCPCB para el taller de @kicad_pcb que estamos empezando este aรฑo en @MakerALC : github.com/MakerAlc/tallerpcb
Primera impresiรณn de los PCBs es buena, faltan de llegar los stencils, vienen en otro paquete :-/
Ahora a verificar que funcionan -
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
Got curved track routing working in @kicad_pcb! Thanks to @SethHillbrand for doing 95% of the work last year; it just needed some fine-tuning. There's still a lot that doesn't work very well about curved tracks yet, but one step at a time :)
-
KiCad PCB reposted
Konrad Beckmann
@kbeckmann
New project almost fully routed. Letโs hope it works. Always a bit scary with new parts.
-
KiCad PCB reposted
Will Furnell
@willfurnell
How overkill is /too/ overkill? This is all for a button... (made with @kicad_pcb)
-
KiCad PCB reposted
ๆณๆฏฌใกใใ
@Somali_chan
ใใใใ๏ฝใ
-
KiCad PCB reposted
ๆณๆฏฌใกใใ
@Somali_chan
Type-Somali v2.0.01
-
KiCad PCB reposted
Sebastian Staacks
@diconx
While waiting for my #pcb, I created it in #blender. It escalated a bit beyond a simple export from @kicad_pcb...
This is only low-res, though. The full version will render a while, but I have to build the device, write some code and create the full video and article anyways... -
KiCad PCB
@kicad_pcb
Enjoy KiCad 5.1.9. Mostly a bunch of stability fixes, but certainly an improvement nonetheless :D
kicad.org/blog/2020/12/KiCad-5.1.9-Release/ -
KiCad PCB
@kicad_pcb
Artistic PCB desgin demo right now by Kliment
rc3-hha.scw-lab.loop23.io/hha/ArtisticPCBdesign.html -
KiCad PCB reposted
Yuniesky R Benitez
@r_yuniesky
Ya esta ensamblado el prototipo del #lc_esp_reflow Es un control de Reflow de bajo costo con #esp8266 control de Fan y #mqtt.
El Firmware esta inspirado en el Tiny Reflow Controller V2 de @rocketscream
Gracias a @kicad_pcb @JLCPCB @rocketscream
#maker #electronics #reflow -
KiCad PCB reposted
Sebastian Staacks
@diconx
Just finished my first #pcb in @kicad_pcb. Fantastic software!
Now I have to wait until January to see if my design works... -
KiCad PCB reposted
Bruno Bernard โก
@eznix86
Get your little tux badge with @atech5122 at tecknologg.website
too ๐
#open_source_hardware #hardware #opensource @kicad_pcb -
KiCad PCB
@kicad_pcb
๐ "Donations are now at $8149. That's impressive for just one week." -- Wayne Stambaugh
Mentioned in internal chat between developers. Feel free to exceed the 10k$ goal, more info see: kicad.org/blog/2020/12/KiCads-2020-End-of-Year-Fund-Drive/ -
KiCad PCB reposted
ZenzHu
@zZenz
@FreeCADNews @kicad_pcb The best combination.
-
KiCad PCB reposted
Miguel รngel Ajo
@mangel_ajo
Congratulations to all the @kicad_pcb team and Wayne Stambaugh for his great leadership youtu.be/6qcsJfoqbL4 #kicad #opensource #hardware . This software is really making a difference in the hardware industry. Proud to once have been part of that team ๐ keep up the good work!
-
KiCad PCB
@kicad_pcb
Our 2020 year end fund drive has started! If KiCad has helped you this year, please consider donating to support development, documentation and community at go.kicad.org/donate
Between now and Jan 15, @KiProEDA will match your donation dollar for dollar.
Thank you! -
KiCad PCB reposted
-
KiCad PCB reposted
Jorge :P (akirasan)
@akirasan
Cuando hay dos cosas que te gustan #blender y #kicad, pues salen cosas cรณmo estas: Blender Badge del Blender Community Logo
#blenderbadge #attiny85 #pcb
#pcbart #b3d @Blender @kicad_pcb @PCBWayOfficial -
KiCad PCB reposted
Clayton Smith @argilo@mastodon.online
@argilo
Gqrx 2.14.1 is out! ๐ Plenty of bug fixes since the last release. github.com/csete/gqrx/releases/tag/v2.14.1 #gnuradio #sdr
-
KiCad PCB reposted
Greg
@GregDavill
New project idea ๐
Plenty of PCB area left!
Look at all that free space. -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Changed the LCD from one using a ZIF connector on the back of the PCB to one that solders directly to pads under the display.
A bit more annoying, but look at all that real estate on the bottom, now all the new components will fit there easily! -
KiCad PCB reposted
-
KiCad PCB reposted
Jason "I'm Not A Robot, Damnit" Howard
@jthwho
I really love how close the @kicad_pcb render looks to the final thing. Well, except for my bodge wire. Probably because KiCad assumes I know what I'm doing. :-P
Seriously, thanks for the great software. It makes me want to build all the things. -
KiCad PCB reposted
Derek Konigsberg
@dkonigs
Renderings of the PCB for the Printsizer darkroom timer, screengrabbed straight from #kicad
#electronics #pcb -
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Huh, never realized you can see the inner layers on a castellated edge in the @kicad_pcb render ๐
-
KiCad PCB reposted
Bjorn Huijbregts
@ijsberghut
With help of @baldengineer and his #kicad tutorials Iโve ordered my first pcb! Building an custom Ducati motorcycle dashboard. Debugging time! @kicad_pcb is awesome!
-
KiCad PCB reposted
Shawn Hymel
@ShawnHymel
Designed a #raspberrypi Compute Module 4 carrier board! Now I just need to make it and get a CM4 ๐
-
KiCad PCB reposted
็ฏใฒ
@tomosihi
ใใฃใกใไน ใ ใชkicad
-
KiCad PCB reposted
astroelectronic@
@astroelectronic
AE01.21.11.101 astroelectronic.wordpress.com MCP4531-103 @kicad_pcb @MicrochipTech @arduino @octopart @digikey @MouserElec #electronics #pcb #arduino
-
KiCad PCB reposted
James
@baldengineer
... and that is how @kicad_pcb's 3D render saved my PCB ... Whoops. (I learned my lesson the first time ...)
-
KiCad PCB reposted
Fabrizio
@IObrizio
#kicad render vs reality
#pcb manual assembly , 4L , ENIG
Quectel BG96 & stm32
#smd #iot #layout #diy #catm1 #stm32 #bg96 @kicad_pcb @PCBWayOfficial #prototype -
KiCad PCB reposted
JMN Electronics
@JMNElectronica
Primer PCB que he hecho con @kicad_pcb (ya tocaba), recomendable para quien quiera hacer un PCB con algo bueno, bonito y GRATIS.
kicad.org
Para mi gusto seguirรฉ usando Diptrace, pero dirรญa que no hay razรณn para no hacer todo proyecto de hardware libre con KiCad. -
KiCad PCB reposted
CHROMICO
@atech5122
Just received my after dark PCBs from @oshpark . Didn't get any stickers as I would usually get but I'm really happy with the results :)
-
KiCad PCB reposted
Laurent FRANCOISE
@_Laurent_Fr_
Et voilร un dรฉbut de circuit avec @kicad_pcb ...
J'ai amรฉliorรฉ ma technique pour avoir une rรฉfรฉrence pour placer les composants : j'ai vectorisรฉ en DXF un scan du dessin original, remis ร l'รฉchelle avec Inkscape, et enfin importรฉ dans Kicad. รa marche trรจs bien ! -
KiCad PCB reposted
Radiona_org - Zagreb Makerspace
@RadionaOrg
Still in early stage, @envox #bb3 #stm32 MCU imported from eagle to @kicad_pcb then joined with #ecp5 #ulx3s
-
KiCad PCB reposted
Piotr Zapart
@hexe_fx
Always wanted to build a stereo IR convolver for realistic guitar speaker simulation in my live looping setup. Attempting to achieve that using Teensy4.0 and a new designed preamp/codec/midi board. @PaulStoffregen @kicad_pcb
-
KiCad PCB reposted
Benjamin Vernoux
@bvernoux
I have just finished to convert the amazing open source VNA2 designed by Jan Kรคberich to @kicad_pcb 5.1.7-1
github.com/jankae/VNA2/pull/7 -
KiCad PCB reposted
Anool J M (@anool@fosstodon.org)
@anool
Hackers, @hackaday #remoticon happens a fortnight from now. Got your tickets?
Grab a free one here www.eventbrite.com/e/remoticon-tickets-115886905855?discoโฆ
I'm doing "KiCad to Blender > PCB renders" workshop
hackaday.io/project/175077-remoticon-kicad-to-blender-pcbโฆ
Hope to see ya'll soon
How it starts! How it ends! -
KiCad PCB reposted
Fabrizio
@IObrizio
#kicad render vs reality
#pcb manual assembly
#smd #esp8266 #esp12 #iot
@PCBWayOfficial @kicad_pcb -
KiCad PCB reposted
SnapMagic
@SnapEDA
#changelog KiCad Plugin Version 0.0.4.2 is now live!
We're very excited to share a new version (0.0.4.2) of our KiCad plugin!
๐ headwayapp.co/team-snapeda-updates/kicad-plugin-version-0โฆ -
KiCad PCB reposted
Tech Explorations
@txplore
#kicad Like a Pro, 2nd edition, ebook, available on the Tech Explorations bookstore: txplo.re/cf7f0
-
KiCad PCB reposted
Oldลich Pecรกk
@LoaDy588
4x @Trinamic_MC's TMC2209 drivers, @ST_World's STM32G4 , 10x 12V capable I/O and more, aka the new control board for my CUBE project! Aiming to be fully #oshw compliant, created in @kicad_pcb Let's hope I'll finish writing the firmware for it before christmas...๐
-
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
@kicad_pcb has a new default color theme! (not a fan? the "classic" theme is still available, as are many user-created themes at github.com/pointhi/kicad-color-schemes)
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
Aww yeah #nightlylife
-
KiCad PCB reposted
arturo182 is on Bluesky now
@arturo182
You know how annoying it is to use the Raytracing rendered to render the bottom of the board in @kicad_pcb stable?
This was fixed in nightly, when you rotate the board, the floor switches!
#nightlylife -
KiCad PCB reposted
KiCad PCB
@kicad_pcb
Looks nice up close as well, although I don't have any good lighting conditions here...
-
Post not available here, view on X
KiCad PCB
@kicad_pcb
Looks nice up close as well, although I don't have any good lighting conditions here...
-
KiCad PCB reposted
ใใ
@nihon_niosumai
kicadใงไฝใฃใๅบๆฟใ่ตฐใใใฏใฝใฒใผใงใใใ
-
KiCad PCB reposted
FreeCAD (CAD+CAM+CAE)
@FreeCADNews
#freecad Random Doc Page of the Day:
KiCADStepUp Workbench
This workbench helps create better interoperability between @kicad_pcb and #freecad in numerous ways.
#fc3d #pcb
wiki.freecadweb.org/KicadStepUp_Workbench -
KiCad PCB reposted
Microchip Makes
@MicrochipMakes
Inspired by @ThomasFlummer's SAM D21-based design, @GregDavill set out to create his own KiCon 2020 Virtual Badge with even more tiny LEDs: github.com/gregdavill/kicon-2020-virtual-badge
-
KiCad PCB
@kicad_pcb
We have some minor DNS issues with kicad-pcb.org, but you can use kicad-hosting.web.cern.ch for the main website in the interim.
KiCad PCB
@kicad_pcb
This is now resolved.
-
KiCad PCB reposted
KiCad Services Corporation
@KiProEDA
We had a great conversation with a number of @kicad_pcb developers today on all the exciting features for version 6! You can see the questions and answers/discussion over at the forum
forum.kicad.info/c/kicon/kicon-2020-questions -
KiCad PCB
@kicad_pcb
KiCon 2020 - Developer Q&A www.pscp.tv/w/ckcqJTF3QktBcnlYa1dWalB8MWdxeHZhYWRxUWtKQq6โฆ
-
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
Tomorrow, join me and a number of other @kicad_pcb developers for a Q&A discussion. We'll be doing some demonstrations of new features coming in V6! kicad-kicon.com/2020-developer-q-a/
-
KiCad PCB reposted
KiCad PCB
@kicad_pcb
KiCon 2020 Developers Q&A (and more!)
On October 3rd, at 14:00 UTC, we will have a 2 hour Q&A session with the @kicad_pcb developers about V6 (and beyond). They will also answer your questions!
Forum Post: forum.kicad.info/t/kicon-2020-developers-q-a-and-more/249โฆ
KiCon 2020 Website: kicad-kicon.com -
KiCad PCB reposted
AISLER
@AislerHQ
At the end of 2019 KiCad had a share of about 15% which now went up to 23%. During this time KiCads main competitor stayed nearly the same, congrats on that ๐๐
-
KiCad PCB reposted
KiCad PCB
@kicad_pcb
Interested in asking questions to the KiCad Developers about V6, your project, or any other KiCad questions? Use the hashtag #askkicadv6 to ask via twitter or via other methods, detailed below
Forum Post: forum.kicad.info/t/kicon-2020-developers-q-a-and-more/249โฆ
KiCon 2020 Website: kicad-kicon.com -
KiCad PCB
@kicad_pcb
Interested in asking questions to the KiCad Developers about V6, your project, or any other KiCad questions? Use the hashtag #askkicadv6 to ask via twitter or via other methods, detailed below
Forum Post: forum.kicad.info/t/kicon-2020-developers-q-a-and-more/249โฆ
KiCon 2020 Website: kicad-kicon.com -
KiCad PCB
@kicad_pcb
KiCon 2020 Developers Q&A (and more!)
On October 3rd, at 14:00 UTC, we will have a 2 hour Q&A session with the @kicad_pcb developers about V6 (and beyond). They will also answer your questions!
Forum Post: forum.kicad.info/t/kicon-2020-developers-q-a-and-more/249โฆ
KiCon 2020 Website: kicad-kicon.com -
KiCad PCB reposted
Bahtiyar Bayram
@bayram_bahtiyar
Arduino based Modular Development Board designed with KiCAD. After double check everything it will go to the production...
#kicad @kicad_pcb #arduino #pcb #design -
KiCad PCB reposted
Qbort (now on chaos.social)
@Qbort
@kicad_pcb can now open CADSTAR Schematics! MR 410 was just merged to master branch!
gitlab.com/kicad/code/kicad/-/merge_requests/410 -
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
Continuing layout for MAXWELL.
On the home stretch, only 225 nets unrouted! RAM is done, all but 6 of the 96 input pairs are routed.
Still have to do some low-speed control lines from the MCU to the main FPGA, an I2C EEPROM, the high speed input muxing, and some test points. -
KiCad PCB reposted
Andrew Zonenberg @azonenberg@ioc.exchange
@azonenberg
MEAD LA pod layout continues. Almost done with first-pass routing, just need to do the DAC reference voltages and the input connector.
Still have some routing cleanup to do around the shield rings, then fine tuning of the mechanical design around the input connector. -
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
@kicad_pcb nightly users: did you know you can create custom presets of what layers/objects are visible, and recall them quickly with CTRL+TAB? Hold CTRL and tap TAB to cycle through the list of recently used presets.
-
KiCad PCB reposted
Thomas Flummer
@thomasflummer
Schematic and board design for my #askkicadv6 #kicon2020 #badgelife done! PCBs and parts ordered. It's sporting a @MicrochipMakes SAMD21, a bit of LiPo management and some tiny RGB LEDs. Grab the files at gitlab.com/flummer/kicon-2020-virtual-badge and let me know what I have missed or messed up.
-
KiCad PCB reposted
Energy Cloud Technology
@energycloudtech
Ready to go PCB Fab houses ! @kicad_pcb 3D view ! #pcbdesign #electronics #esp32
-
KiCad PCB reposted
-
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
The @kicad_pcb DRC user interface got a refresh by Jeff Young for version 6. The UI has been streamlined, plus now you can mark certain DRC violations as excluded if you don't want to be bothered by them.
-
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
You can now add leader dimensions in @kicad_pcb nightly. These are labels with an arrow that you can use to add notes about your PCB. You can put a circle or rectangle frame around the note if desired.
-
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
A few new dimension tricks coming to @kicad_pcb version 6: more options for the format and position of the text
-
KiCad PCB reposted
alex โ glow
@glowascii
First @oshpark order in an age!! After Dark specialty fab!!! @kicad_pcb skills not perfect but rolling along again, booyeah!!!!
-
KiCad PCB reposted
SnapMagic
@SnapEDA
@kicad_pcb is an inspiring tool because of its ethos of making electronics design open and accessible. We're thrilled to announce our new KiCad plugin which provides free access to @Snap_EDA's libraries right within KiCad. Learn more: blog.snapeda.com/2020/09/09/introducing-the-snapeda-kicadโฆ
-
KiCad PCB reposted
CH!
@CHexclaim
My first real PCB (previous were handrawn and homebrewed) designed in @kicad_pcb and sent to @PCBWayOfficial . And it worked!! #electronics #hamradio
-
KiCad PCB reposted
Remko
@pe1mew
I am everytime surprised how easy it is to reflow SMD by hand on a small electric stove and what quality can be achieved. #happy @kicad_pcb @AislerHQ
-
KiCad PCB
@kicad_pcb
CADSTAR PCB Archive Importer for pcbnew merged on master! gitlab.com/kicad/code/kicad/-/merge_requests/279
-
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
Working on a busy board? Now you can hide the ratsnest lines for items on hidden copper layers so you can focus on the layers you're currently working with. Coming to @kicad_pcb V6.
-
KiCad PCB reposted
Tim
@timksffff
Just tested my first custom pcbs, a csi cable extension via HDMI for my raspi cam. First pair had some weird glitches in the video, prob. caused by my bad (hand-)soldering. Second pair worked fine. More testing def needed. Designed with @kicad_pcb, manufactured by @JLCPCB
4 media couldn't be displayed. See them on the original post. -
KiCad PCB reposted
Remko
@pe1mew
New PCB's have arrived for @TTNApeldoorn @ApeldoornInData #lorawan P1-nodes on @thethingsntwrk. Designed with @kicad_pcb manufatured by @AislerHQ #thankyou
-
KiCad PCB reposted
Simon John
@sej7278
Thought I'd challenge myself to make a board that can be either traffic lights, gearbox or 12v LED strip driver, depending on software and if resistors are soldered or not (like jumpers). Using @kicad_pcb and getting there, not quite ready to send to @JLCPCB yet
-
KiCad PCB reposted
dave white
@lmsorrydave
New project: went thru @JLCPCB for this 24V I/O controller. Uses ARM STM32F405 MCU. Board features 24V peripheral drivers, protected pushbutton inputs, dips/LEDs, and two 0-5V ADCs. Siked to bring this board up soon!
@kicad_pcb layout by my pal Phil: www.youtube.com/c/PhilS94/featured -
KiCad PCB reposted
@craftyjon@chaos.social
@joncraftyjon
Want to quickly create ground fill on all layers in @kicad_pcb nightly? Select the board outline; convert to multilayer zone. Done!

































































































































































































































































































































































































































































































































































































































































































































































































































































































